comunication SSL 2 two way on t3s since an applet for weblogic

Similar Questions

• Two-way Config error

  I'm a Bi-directional (active - active) config for my DB.
  
  System1 <>- system2
  
  The problem I encountered was a loop to the original system, which would cause record duplication errors. I searched the net and used 'GETAPPLOPS' & 'IGNOREREPLICATES' and 'TRANLOGOPTIONS EXCLUDEUSER xxxx' in both the ext1 extracted in system1(Source machine) and ext2 in system2 (target machine).
  
  But now I am unable to replicate the record now. What must have gone bad? I do this mapping in Datapump? as indicated in the RFSO GG mapping is checked. Here are the params Ext1 and Ext2
  
  EXT1
  ----------------------------------------------------------------
  EXTRACT ext1
  USERID - abc, dba PASSWORD
  Abc, DAOBWAGFFIIDEJTHTCIJUBGBSDJBBFTKJYBLJGPIFBPASEFJHJWCEJBHHFGJXD, encryptkey secret1 PASSWORD USERID
  discardfile. / dirrpt/ext1.dsc, purge
  reportcount every 30 minutes, rate
  NOCOMPRESSDELETES
  exttrail/u01/app/oracle/product/gg/dirdat/l1
  ABC TRANLOGOPTIONS EXCLUDEUSER
  GETAPPLOPS
  IGNOREREPLICATES
  table abc.*;
  
  ext2
  -----------------------------------------------------------------
  EXCERPT from ext2
  USERID - abc, dba PASSWORD
  Abc, DAOBWAGFFIIDEJTHTCIJUBGBSDJBBFTKJYBLJGPIFBPASEFJHJWCEJBHHFGJXD, encryptkey secret1 PASSWORD USERID
  discardfile. / dirrpt/ext2.dsc, purge
  reportcount every 30 minutes, rate
  NOCOMPRESSDELETES
  exttrail/u01/app/oracle/product/gg/dirdat/l2
  ABC TRANLOGOPTIONS EXCLUDEUSER
  GETAPPLOPS
  IGNOREREPLICATES
  table abc.*;
  
  I have to do the mapping more my excerpt/datapump/replicate?
  
  What all things, we need to take more care in a two-way configuration?

  Lother says:
  For Replicat1, it's on the target machine, I use "ggs_admin1" user to connect to the DB. And even I use Ext1 to EXCLUDE (TRANLOGOPTIONS EXCLUDEUSER ggs_admin1)

  Given that you only posted the configurations of the excerpt, I had no way to tell if you were right or wrong. The idea is:

  X server:
  REP connects with the user GGS1
  Extract connects with the user GGS1 and excludes to capture transactions from GGS1 (REP uses this user to apply changes, so by excluding, get rid of data ping pong)

  Same thing applies to Server 2, 3, 4 and so on...

  Hope that's clear

• How the webservice call (two way ssl) from a composite?

  How the webservice call (two way ssl) from a composite? What configuration of weblogic, I put?

  Problem with one of the managed server while activating SSL. _ issue Resovled

  Certificate is not correct according to standarad for its use.

  Kind regards
  Anuj

• Enable two-way to care will not be checked if I get a communication error message when I try to print from my Lexmark Pro905 (using Windows 7 64-bit)

  Help, please!  I tried to fix this for HOURS, reading the TONS of info. on the Internet without success.  I have installed and reinstalled the software Lexmark a dozen times.  It installs Lexmark Pro900 Series (network) and Lexmark Pro900 series (USB).  The "two-way" box will remain enabled in the properties of the printer to the USB version but not the network version which is what I want to use (since I want to be wireless).  I have no idea how to solve this problem. Analysis of my computer, copy, etc, everything works fine with the printer... I can't print... it keeps saying "Communication not available" and check the box bidrectional.  I check, hit apply, then ok, but then when I go back into the properties of the printer it is more verified. :(

  Hi Nicole,.

  I suggest to read the article below and follow the instructions.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  See also the article given below to set the printer as the default printer.

  Change your default printer

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  If the problem persists, I suggest you to contact the support of printer on the issue.

  http://www.Lexmark.com/en_US/about-us/company/contact-us.shtml

  If you have questions related to Windows, feel free to post. We're here to help.

• Two-way sync with Google Apps Gmail/Verizon blackBerry smartphones does not

  To navigate on this forum, I see the two-way synchronization of read/delete messages with Gmail should work since early May. However, I was never able to get the two-way synchronization works successfully on my BlackBerry. (I have a Storm 9530 with Verizon, and I use BIS with Google Apps Gmail on my own domain name.)

  Several times over the last couple months, I've tried different combinations of: deleting my account Gmail from BIS and Add again a few hours later. Reset my device; return service directories; ensuring that all my BIS and parameters in the reconciliation of the enamel on my device are in order. But I read in Gmail messages continue to remain not read on my BB has marked more than a day later.

  Notably, sent messages to Gmail appear on my BlackBerry and have since early May. Contacts sync also works as expected. However, no other aspect of the two-way sync seems to work. Is there anything I can try to make it work?

  Postini disabling and modify records MX for ASPMX. L.GOOGLE.COM. et al., then remove and re - integrate my bis account has indeed fixed my problem. Apparently parts of the BIS use MX one records field to determine whether to use Gmail or IMAP ordinary. That's why reconciliation features for Gmail (and some of the features of the plugin improved too, Gmail it looks to) are not available if your Google Apps domain uses the Postini Services.

  Fortunately, I don't require Postini on my domain (because it is just my private domain, I really useless company features;) I allowed him only because that's where ), so that this action has resolved the problem for me. Although this bug could end up biting small businesses that use Google Apps with Postini and want to use BIS; If all goes well it will be fixed in a future BIS release.

• Is it possible to create two-way multiselect tables? Help.

  Hey everyone (once again since you're indeed great to help me to).

  I was wondering if it would be possible to create two-way multiselect tables to interact with each other, as qlikview behavior have, because that's my goal.

  Imagine that I have 3 tables in my schema/database:

  Departments (of an HR diagram), with the following attributes: department_id (primary key), department_name, manager_id, location_id;

  Salary_by_job (created for this purpose), with the following attributes: job_id (primary key), department_id, salary, min_salary, max_salary;

  Employees (from HR diagram), with the following attributes: employe_id,..., job_id, salary, manager_id, department_id

  Would it be possible to creat multiselect two-way tables?

  Like the following:

  -I click on a Department, it shows the data relevant to this Department in the table salary_by_job and the employees table.

  And after having clicked on that, I could click on a single employee and the department table would be the same (because it's an employee in the same Department), but the salary_by_job would show only the information about the argument job_id for this employee.

  I'll try to show some text here:

  Department (selected line = 1) = Department of Public Information (which has 3 employees)

  Employees = X (with the job_id = adminargument), are (with the job_id = managerargument) and Z (with the job_id = Internargument)

  Salary_by_job = Admin, with data blah blah blah, Manager, with data blah blah blah and trainee, with data blah blah blah

  And then I have to click on the X of the employee and the result would be:

  Department (selected line = 1) = Department of Public Information (which has 3 employees)

  Employees = X (with job_id = adminargument)

  Salary_by_job = Admin, with data blah blah blah

  Can do something like this? If so, how?

  I think attached with fasteners at each table and have links to move forward and backward.

  If anyone has an idea how to do this, please respond, it may be useful.

  Thanks a lot for all the help. Have a beautiful day!

  Kind regards

  Frederico Barracha.

  BTW, I use jdeveloper 12.1.2.0.0

  Mensagem editada por: FredericoSB

  FredericoSB,

  Have you tried to add a setPropertyListener for tables and change the collectionModel to the 3rd table accordingly?

  Ex: Suppose you have three tables, Parent (VL)-> child (VL)-> grandchild. There is a relationship between the (VL) Parent-> child.

  Now, you can have links to tree for both the GrandChilds (for example GrandChildViaParent and GrandChildViaChild).

  Your jspx could be something like

  If all your tables are read-only, then you can change it to something like

  This is just a sample. You could implement the same for all properties in the table of a grandchild as EL to make editable as well.

  It comes without coding. If you care to code a little, you could use a dynamic array in place and tie the value accordingly in each of the selectionListener in the table (that would be a neat approach)

  Arun-

• Satellite L20 - keyboard keys two-way - this driver download.

  I have a laptop Toshiba L20. I loaded Win XP but don't have original operating system. Problem is my '@' and '@' keys are two-way around... Can someone help me find the right driver for the keyboard?

  First the keyboard driver is part of the windows operating system.
  Second, you can solve this problem by changing the language settings of the keyboard and not by installing a keyboard driver.

  So, you can change these settings here:
  Control Panel-> regional and language-> languages-> details Options

  Here you have to change the language of the keyboard. I put t know what keyboard layout, you have exactly but maybe you should change British to the Americans or Americans in the United Kingdom.
  Check it out!

• Two-way-going with USRP n210

  Hi all

  I'm doing a two-way-going using the USRP n210. To be able to do that, I will need to know the exact time that samples have been sent and the time that I have received back.
  Trying to implement that I want to use 2 USRPs linked together.
  (USRP HAS)              (USRP B)
  TX<----------------->
  rx -----------------> tx

  For the porpuses first test, I used a single USRP linking the RX and TX together. With the help of a simple flow in the RRB graph I out a pulse (using the vector source) and at the same time, I have everything from the entrance of the USRP stored in a file (using the file sink block). For comparison, I also used a file sink block in the output.

  Testing again the difference between when I starts the code and the time the impulse arrives at the RX looks like that there is a kind of random delay. The difference between the send and receive in return the pulse fluctuates around 8000 ~ 10000 samples. Because I use a single USRP with RX and TX interconnected I though that this time limit should be almost zero.

  There's a better way to implement what I can get better accuracy in the timestamp?

  One solution that has helped me to solve my problem was using the following code in the code generated by the companion of GNU python:

  now = self.uhd_usrp_sink_0.get_time_now (#Store) the real time of the FPGA
  Self.uhd_usrp_source_0.set_start_time (UHD.time_spec_t (1) + now) #Set the source to start 1 second after the real time of the FPGA
  Self.uhd_usrp_sink_0.set_start_time (UHD.time_spec_t (1) + now) #Set the sink to start 1 second after the real time of the FPGA

  In this way both tx and rx, will begin at the same time.

• Multisim has a zener diode two-way which act as limiter circuit?

  Hi all. I want to simulate a curcuit that she can act like a limiter circuit.

  But I can't get the good two-way zener diode. the two-way zener diode in the next sch does not work!

  the output wave is the same as the wave of entry. the amplitude of the output wave is not limited.

  Ok. I know. Use two diode zener serial!

• HP Deskjet 1050 (J410 series): unable to establish two way connection printer

  Hello

  My printer is connected to my laptop via a USB port and provides ink level readings. It will not print any documents or test pages and when I try to align/clean ink cartridges a message "Unable to establish two track with device connection".

  Can someone advise me on how to solve this problem as soon as possible? Thank you!

  Hello @West__44,

  I would like to help you today to correct the problems of two-way communication that you encounter when using the USB connected HP Deskjet 1050 all-in-One printer on your computer Windows 8.1. Because you get this error via a USB cable connection there are likely a driver or software conflicts between your HP Deskjet and your Windows computer. Can I please you follow the steps below to resolve this issue.

  • Please, unplug your USB cable from your printer and your computer before you continue.

  Step 1: Remove the driver:

  For the purposes of troubleshooting, it is essential that we have a clean slate to work with. Therefore, I will be having remove you all traces of your HP Deskjet from your computer in Windows before you run the hotfix.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type programs and features. Click on programs and features to start.
  3. Under the window programs and features will populate a list of the programs installed on your computer. Please scroll through the list and select your Printer HP Deskjet. Click Uninstall.
  4. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Do not connect the USB cable until the installation program invites you to
  4. On your laptop, please make sure that the USB cable is plugged directly from the back of your printer to the laptop. Avoid USB Extenders and home stations as they can cause conflicts of USB communication.

  Once the installation is completed successfully, please test print to confirm that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Thanks for joining the Forums from HP Support. I can't wait to hear strings attached good luck!

• LaserJet 400 M401dn: LaserJet 400 M401dn no two-way Communication

  The box to check the two-way Communication is grayed out and not verified.  We use FM Audit and officers on local printers installed for the counters and toner provide alerts and need this feature.  All PC use the right HP driver for this model, version unknown.  All agents do not report the levels of supply or meters.

  Support FMA suggested using a universal print driver, which we did.  We can now check for two-way Communication and receive meters, but still no power levels.

  Thanks for the comments.  After many trips on the clients site for FM Audit report meter/supply levels, finally informed me their tech support my model HP so that countless others report not correctly if at all when a local USB connection is used.  Here is a link to the models and how they report, or not in my case.

  FTP://FTP.fmaudit.com/customer/documents/Device_Compatibility_2016.PDF

• After a microsoft error message, my laptop keyboard has sudenly has started to misbehave - characters are two-way and in case added places after the original character. Clues?

  After a microsoft error message, my laptop keyboard has sudenly has started to misbehave - characters are two-way and in case added places after the original character. Clues?

  Care to be more detailed?  What version of Windows?  What is the brand and model of the laptop?  How old was he?  Have you contacted the provider support?  What has changed on your PC between when it was last and now?

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]