Error "Unable to establish two-way communication with the device" Windows 8 with c309g

Similar Questions

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Photosmart C4795 all-in-1 main: all-in-one HP Photosmart C4700 printer unable to establish 2 way communication with the PC

  I have more than one year of experience using this printer with no problems. Several days ago, it has become unplugged from the PC that I have been using it for over a year & stayed like that for 2 or 3 days. At the end of those 2 or 3 days, the cable has been properly reconnected, but was unable to restore '2 - way communication' with my PC since then.

  As this is a scanner/printer I have proven it always of the functions as a photo Copier.

  To try to solve this problem, I updated the drivers & replaced the cable with a new one without success.

  My OS is Windows 7, as this PC 4 or 5 year, is not compatible with windows 10.

  PS - I would also try to use it with my new PC (a Touchsmart laptop HP with Windows 10 15), but my terms of service for the State of Photosmart C4795 printer software which using the software on more than 1 computer is a violation of the terms of service.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem of communication with your PC.  Download and run "print and Scan Doctor."

  For your Windows 10 machine I suggest you download the recommended driver and software from HP here.

• HP Deskjet 1050 (J410 series): unable to establish two way connection printer

  Hello

  My printer is connected to my laptop via a USB port and provides ink level readings. It will not print any documents or test pages and when I try to align/clean ink cartridges a message "Unable to establish two track with device connection".

  Can someone advise me on how to solve this problem as soon as possible? Thank you!

  Hello @West__44,

  I would like to help you today to correct the problems of two-way communication that you encounter when using the USB connected HP Deskjet 1050 all-in-One printer on your computer Windows 8.1. Because you get this error via a USB cable connection there are likely a driver or software conflicts between your HP Deskjet and your Windows computer. Can I please you follow the steps below to resolve this issue.

  • Please, unplug your USB cable from your printer and your computer before you continue.

  Step 1: Remove the driver:

  For the purposes of troubleshooting, it is essential that we have a clean slate to work with. Therefore, I will be having remove you all traces of your HP Deskjet from your computer in Windows before you run the hotfix.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type programs and features. Click on programs and features to start.
  3. Under the window programs and features will populate a list of the programs installed on your computer. Please scroll through the list and select your Printer HP Deskjet. Click Uninstall.
  4. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Do not connect the USB cable until the installation program invites you to
  4. On your laptop, please make sure that the USB cable is plugged directly from the back of your printer to the laptop. Avoid USB Extenders and home stations as they can cause conflicts of USB communication.

  Once the installation is completed successfully, please test print to confirm that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Thanks for joining the Forums from HP Support. I can't wait to hear strings attached good luck!

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• two-way communication with the web service

  I need help with a problem with web services on 8.6.  I do not know if this is possible.

  I have a web service that works very well.  At this point all it defines a Boolean value.

  For the test, I'm just using IE to see the data.  This works.  I can see the Boolean value change each time I send a 0 or 1 value through the URL.

  My problem is this: when I change the Boolean value, I can't read the value of another application of IE.  In other words, I want to be able to open IE twice in two different windows.  When I change a value of an Internet Explorer session, I want to see the value changes in the other session of IE (after refresh).  From now on, it seems that each session of Internet Explorer is a separate instance of the web service.  How can I edit a Boolean value, and read this variation by another IE session?

  My cause is hopeless?  Are web services 'read only '?  Any help would be appreciated.

  Bad form for the double post but the forum wouldn't let me edit my post:

  

  This VI is a good example of a global LabVIEW 2 style. The registry value at offset uninitialized loop will be persist appealed to the other of this VI. So when the game is true the value of data is stored in the shift register. When all is false the value of the shift register is returned unchanged. Make sure you have 'Keep VI in memory' checked in the configuration of your web service.

  You could do the same thing without parameters selected using two screws separated

• can't print-impossible to establish a two-way communication

  Win7, Lemark printer with a USB connection.  I move the printer to a Win7 computer, where he worked on another computer.  I wanted to use a longer USB cable but removes any new variables I use the same USB cable.  I deleted everything I can find on printing and downloaded the new drivers and install, several times.  As part of the installation, I can print allignment page.  However, when I try to print a test page, I get the message that it cannot print because it is impossible to establish a two-way communication and go into the Setup menu and set two-way communication.  I go to the ports tab in the setup of details and the checkbox for two-way communication is grayed out, so it cannot be set.  How can I get this impression of installation?

  Hi Hustlinghare,

  -What is the exact full error message?

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  I suggest you check out the link for help that is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For more information, refer to the article below.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Two-way-going with USRP n210

  Hi all

  I'm doing a two-way-going using the USRP n210. To be able to do that, I will need to know the exact time that samples have been sent and the time that I have received back.
  Trying to implement that I want to use 2 USRPs linked together.
  (USRP HAS)              (USRP B)
  TX<----------------->
  rx -----------------> tx

  For the porpuses first test, I used a single USRP linking the RX and TX together. With the help of a simple flow in the RRB graph I out a pulse (using the vector source) and at the same time, I have everything from the entrance of the USRP stored in a file (using the file sink block). For comparison, I also used a file sink block in the output.

  Testing again the difference between when I starts the code and the time the impulse arrives at the RX looks like that there is a kind of random delay. The difference between the send and receive in return the pulse fluctuates around 8000 ~ 10000 samples. Because I use a single USRP with RX and TX interconnected I though that this time limit should be almost zero.

  There's a better way to implement what I can get better accuracy in the timestamp?

  One solution that has helped me to solve my problem was using the following code in the code generated by the companion of GNU python:

  now = self.uhd_usrp_sink_0.get_time_now (#Store) the real time of the FPGA
  Self.uhd_usrp_source_0.set_start_time (UHD.time_spec_t (1) + now) #Set the source to start 1 second after the real time of the FPGA
  Self.uhd_usrp_sink_0.set_start_time (UHD.time_spec_t (1) + now) #Set the sink to start 1 second after the real time of the FPGA

  In this way both tx and rx, will begin at the same time.

• LaserJet 400 M401dn: LaserJet 400 M401dn no two-way Communication

  The box to check the two-way Communication is grayed out and not verified.  We use FM Audit and officers on local printers installed for the counters and toner provide alerts and need this feature.  All PC use the right HP driver for this model, version unknown.  All agents do not report the levels of supply or meters.

  Support FMA suggested using a universal print driver, which we did.  We can now check for two-way Communication and receive meters, but still no power levels.

  Thanks for the comments.  After many trips on the clients site for FM Audit report meter/supply levels, finally informed me their tech support my model HP so that countless others report not correctly if at all when a local USB connection is used.  Here is a link to the models and how they report, or not in my case.

  FTP://FTP.fmaudit.com/customer/documents/Device_Compatibility_2016.PDF

• Cannot configure gmail with messaging metro app error unable to connect. Make sure that the information you entered is correct

  I was able to add an account Gmail for Windows 8 Mail App on my first install and everything worked well. Then bought an SSD and completely installed a new OS of Windows 8 it. Connected with the Live account that I used with the first installation of windows 8. All synchronized. The Mail app has Live accounts and Gmail put in place without having to re-enter the information myself. However, I noticed that Gmail sync never even when I choose sync. Removed from the account to add it again, but have failed so far. Keep gives me the error "unable to connect. Make sure that the information you entered is correct. "Tried to install it on my phone Windows 8 (Nokia 920) and he keeps asking me to re-enter the password. I'm 100% sure that I have no 2-step check set up I checked several times. Never allowed them in the first place.

  At this point, I don't know if it's Google problem or the problem of the Mail application. Any suggestion?

  I also had the same problem. I had no problem for the other three Windows 8 install / computers that I used and the last she has imported all the fine adjustments. However, I had a portable Windows 8 different today and worked alone of my three accounts to Gmail. How I fixed it:

  Of the Mail app: charms > settings > accounts > add account > other account (NOT GMAIL!)
  Click IMAP for account type, then enter your credentials as usual. It connected and synchronized immediately for me.
  Hope this helps!

• Need two-way communication...

  The chronology root... The first line below Initializes a class that runs a remote script, blah blah blah - and so on. This part of work and other things. Now on the next line, I'm filling a list item (also on the root timeline) with a variable DataProvider that was generated in the previous line. It works... kind of (explain in a moment). The third line fills a comboBox using a different DataProvider which came from the class on line 1. This also works (once again, somehow). Line 4 does not work. However, once everything is loaded, I can run the code to change the selectedIndex to the comboBox property by using the syntax of line 4 without problem.
  
  Customer = new getClientList();
  myList.dataProvider = clientList.myData;
  logoData.dataProvider = clientList.xmlLogoData;
  logoData.selectedIndex = 2;
  
  From what I can guess, the data is not returned before the lines 2, 3 and 4 are running. I don't know how "wait" data before I start 2-4 lines. Looks like my main questions seem to be with (which is apparently) one-way communication between the root and the functions of class (and also of the class functions that initiate the classes themselves). Looks like the root can be called a class, this class can call a class and a class cannot call functions in the parent class or the root. I don't know if a person can even return (somehow) a 'thumb up' that the function call is finished (this way I can call a class and tell the root "wait" indefinitely for the return).
  
  For example, in access remote, you can send a call to the remote server and it can take a millisecond or it may take a full minute or more. The thing is, when it's done, you get a reminder a RESULT or FAULT. I want to do something similar with the classes. I want to call the class, have him do his thing, then again report when finished (whenver that is). It would be at this point I was running 2-4 lines. What seems to happen is that the remote call has not arrived in the class ahead of 2-4 lines. So sometimes they work and sometimes they have not (with line 4 to never work).
  
  I would like to fill in the data in the list on the root of the class in the function of distance communication success. However, the classes do not seem to like to communicate back very easily. I read that you have to sort of 'doing' a root to force a root in existence. I also read that addListener works in all classes, but I do not know what headset to use because I would like the listener to fire at the end of a set of instructions of function and not on a CLICK. Can trigger you a listener with a line of code like this, and are the listeners 'global '? If so... what would the event property and how to call it? Is it still a viable solution?
  
  Any thoughts outside what I think this could work?

  The easiest way is to use the event model. Something like this:

  Customer = new getClientList();
  clientList.addEventListener ("listReady", clientListEventHandler);

  function clientListEventHandler(event:Event)
  {
  myList.dataProvider = clientList.myData;
  logoData.dataProvider = clientList.xmlLogoData;
  logoData.selectedIndex = 2;
  }

  public class getClientList extends MovieClip {}

  //...

  public void goodGet(result:Object):void {}

  ... other code
  dispatchEvent (new Event ("listReady"));
  }

  // ...

  }

• Windows 8 mail, Gmail error unable to connect. Make sure that the information you entered is correct

  I tried to set up a Gmail on windows mail 8 for some time. It worked before but then I had to re - install the app and I can't seem to log in now. The only difference between now and when it worked is that I had turned on google + once I had it working the first time, but now I have that turned off.

  I always get this error: unable to connect. Make sure that the information you entered is correct.
  If I have the chance and he fails to add account, then synchronization takes a long time and emails take 5-10 minutes to arrive on the application it does to get to my account in a web browser and on my phone.
  Many users complain about this, we really need a strong response here.

  Hi Martyr844_Coffe,

  Make sure that your google account manager has granted approval of this log - in...

  From there... https://myaccount.google.com/.

  And change the account setting Gmail on Mail app account like the following picture setting...

  (To find out the specific parameters of the account )
  

• Impossible to establish a two-way connection with mac 10.5.8 and officejet 6500 e709a

  I was able to use my printer before without any problem, but this week he has stopped communicating with my iMac. I am running OS 10.5.8 and my printer is an officejet 6500 e709a. I tried to reset the printing system, uninstall and reinstall the hp software, turning and turn it on again, switching cords and usb ports, and nothing seems to work. I tested the ports on the iMac and they work with other devices, and the printer works fine with my macbook that uses the same operating system. Where should I go from here?

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Two-way sync with Google Apps Gmail/Verizon blackBerry smartphones does not

  To navigate on this forum, I see the two-way synchronization of read/delete messages with Gmail should work since early May. However, I was never able to get the two-way synchronization works successfully on my BlackBerry. (I have a Storm 9530 with Verizon, and I use BIS with Google Apps Gmail on my own domain name.)

  Several times over the last couple months, I've tried different combinations of: deleting my account Gmail from BIS and Add again a few hours later. Reset my device; return service directories; ensuring that all my BIS and parameters in the reconciliation of the enamel on my device are in order. But I read in Gmail messages continue to remain not read on my BB has marked more than a day later.

  Notably, sent messages to Gmail appear on my BlackBerry and have since early May. Contacts sync also works as expected. However, no other aspect of the two-way sync seems to work. Is there anything I can try to make it work?

  Postini disabling and modify records MX for ASPMX. L.GOOGLE.COM. et al., then remove and re - integrate my bis account has indeed fixed my problem. Apparently parts of the BIS use MX one records field to determine whether to use Gmail or IMAP ordinary. That's why reconciliation features for Gmail (and some of the features of the plugin improved too, Gmail it looks to) are not available if your Google Apps domain uses the Postini Services.

  Fortunately, I don't require Postini on my domain (because it is just my private domain, I really useless company features;) I allowed him only because that's where ), so that this action has resolved the problem for me. Although this bug could end up biting small businesses that use Google Apps with Postini and want to use BIS; If all goes well it will be fixed in a future BIS release.

• How to two-way radios with Wireless Comfort Keyboard 5000 or Wireless mouse 5000

  I have two transceivers, working with the keyboard and the other with the mouse (I've trashed, in each case, one of the pair).  I want to pair the 5000 Microsoft keyboard and mouse to perform a transceiver.

  Hello, Marshall,

  Connecting a Microsoft's Bluetooth device

  http://www.Microsoft.com/hardware/en-us/help/support/how-to/mouse/Bluetooth

  Connect a keyboard using a transmitter/receiver Microsoft Bluetooth with First Connect

  Some models of Bluetooth keyboards include transceivers with buttons on them to make it easier to pair the device to the computer.

  1. Connect the Microsoft Bluetooth transmitter into a USB port.
  2. Press and hold the Connect button on the USB transceiver for five seconds. The Microsoft Connection Wizard appears.
  3. Follow the instructions in the wizard to connect to your device.

  -or-

  1. Start IntelliType Pro.
  2. Make sure you have selected the Bluetooth keyboard that uses your First Connect transceiver.
  3. Click the Wireless tab, and then click connect .
  4. Follow the instructions in the wizard to connect to your device.

  Connect a Bluetooth without First Connect keyboard

  The Wireless Optical Desktop for Bluetooth and the Bluetooth keyboard elite have no First Connect buttons on their radios. For more information on pairing of these keyboards for your computer, see the Bluetooth connection Guide or the documentation that came with your Bluetooth program.

  Connect a keyboard without a Microsoft Bluetooth transceiver

  If your computer is equipped with a built-in Bluetooth transmitter/receiver, you can use to connect your keyboard without using a Microsoft USB transceiver.

  Important

  If you connect with a non Microsoft Bluetooth TRANSCEIVER, some advanced features of the IntelliType Pro software may not work. The IntelliType Pro software is designed to work with the Microsoft Bluetooth software. Toshiba Bluetooth software is known to work in most cases. Other software Bluetooth may work but is not supported.

  1. On your computer, open the Bluetooth program. The Bluetooth program is generally in Control Panel or the Start menu.
  2. Press and hold the button connection on the bottom of the keyboard. If your device is equipped with a battery indicator light, it flashes red/green to indicate that the device is discoverable.
  3. In the program of Bluetooth, use the option to add a new device.
     Note
     The exact verbiage may vary slightly between versions and Bluetooth programs.
  4. Follow the instructions. If you are prompted to set up a password, leave the program chooses a password for you.

  Opening the Bluetooth program

  There are several versions of Bluetooth programs that help you to connect your device to your wireless Bluetooth transmitter/receiver. See the documentation provided with your computer or contact the computer manufacturer for more information on how to use their program.

  Note

  If your computer cannot detect a Bluetooth transceiver, Bluetooth software is not available in the Windows menus.

  http://www.Microsoft.com/hardware/en-us/help/support/how-to/keyboard/Bluetooth
   
   
  Microsoft Hardware how - to of
  http://www.Microsoft.com/hardware/en-us/support/how-to