Enable two-way to care will not be checked if I get a communication error message when I try to print from my Lexmark Pro905 (using Windows 7 64-bit)

Similar Questions

• "communication not available with the printer" message when you try to print to a Lexmark 1270 x all-in-one

  I am running windows xp family.  I don't know what happened, but all of a sudden, I get this message when I try and print to my lexmark x 1270 "communication not available with the printer. I tried every troubleshooter, I contacted Lexmark support that they gave up, saying: it must be a file is missing from the windows registry, you can help me?

  It seems that if you say that the pilots were not reinstalled successfully.  What was the mystery file that could not be found?

  Do you remember how the software has been uninstalled?  Was something else than the control panel > Add / Remove Programs (or the link "Uninstall" from start > all programs) used?

  If you do not really clean things, attempts to reinstall the printer drivers may actually just end up putting the old drivers back in place.

  This is the easiest way to uninstall and reinstall the printer drivers: Article 1.  The critical step is #4.

  This page has more detailed advice for cleaning things out before you reinstall: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  I asked the firewall and antivirus applications because sometimes, some security software may interfere with the printers.  This shouldn't be a problem with the firewall of Windows XP and Microsoft Security Essentials.

  Finally, your problem could end up being hardware related.  Lexmark support has no hardware troubleshooting operation?  The manual for your x 1270 says:

  All-in-One is not communicating with the computer

  1. disconnect and reconnect both ends of the USB cable. For more help, see the
  installation documentation.
  2 unplug the power cord from the wall outlet, plug it in again, and
  Press Power. For more information, refer to the installation documentation.
  3 restart the computer. If the problem continues, remove and then reinstall
  the software. For more information, see page 16. [which ask you to remove the software using the link "Uninstall" - which is not complete, as described above]

  If you have another type of printer USB cable, you should try it exchanges.  Ideally, you need to connect to the printer on another computer, but maybe it's not convenient for you.

• I get error messages when I try to visit some Web sites you use Mozilla Firefox, but not when I use other browsers

  About two days ago, I noticed that when I tried to access some websites using Firefox, I always got this error message. "The connection was reset". Initially, I thought it was a problem with my ISP before noticing that the network was fine on my phone and the iPad. I tried and then open the same links which brought up the error message on the TorBrowser and it worked perfectly.

  Basically, the only site that works right now on my Firefox browser is Google but if I do a Google search and then click on any link that appears so I get the same error message, "the connection was reset". I can also connect to my gmail account, but I can't access any other Web site including Feedly, Tumblr, Twitter, Yahoo, Wordpress, Blogspot, even though they work fine on my other browser.

  I have cleared my cache and cookies, wiped out all browsing history, but the problem persists then I uninstalled Mozilla Firefox and reinstalled. The problem is still there. I checked the proxy settings, I went through all the solutions on this page https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can?esab=a & as = aaq and still nothing. I'm not sure what the problem is here, but any solution will be appreciated. I have used Firefox for years and I'm really not comfortable using a different browser.

  I use a Macbook OS X Version 10.9.4 and the last Firefox 32.0.1

  Create a new profile as a test to see if your profile is the source of the problems.
  
  See creating a profile:

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem
  
  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I updated Firefox, restarted and now I get the following error message when I try to reopen Firefox. "The sqlite3_stmt_readonly of procedure not found entry into the dynamic link library mozsqlite3.dll."

  I just updated Firefox and restarted.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

  5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
  Setup could not create the directory
  c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
  Error5: Access denied
  In the Temp folder under Security I have:
  'SYSTEM' with full control
  "Administrators" with full control
  "Username" with full control
  All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
  The two latest downloads gave the same error message.

  Thank you for your time.
  Debbie

  I suggest you do this:

  1. click on the start planet.
  2. type cmd.exe in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands exactly and press ENTER after each:
  takeown /f "%Temp%" / r

  Cacls "%Temp%" / t/c/g "%nom user %": F System: F

  (Enter Y when you are prompted "Are you sure?")

• persistent "not specified" errors java script when you try to print from Web sites...

  Windows 7 64 - bit OS, HP Photosmart C4780 printer, HP Pavilion dv6 Laptop.Recently meet persistent "not specified" errors java script when you try to print from Web sites, please help.

  Try cleaning your cache. Here's a link below that will help you with this problem.
  http://goo.GL/wE6gL

• Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think.

  Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

  CBTEKRONY wrote:

  Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

  What is this error message that you receive? This would help a lot. From there, a person must be able to provide some additional troubleshooting steps.

• When you try to install call of duty 2 on windows 7 64 bit, I received "library not registered".

  original title: library not registered

  When you try to install call of duty 2 on windows 7 64 bit, I received "library not registered".

  ------

• Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work

  Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top.  Please provide me with a fix for this problem. Thank you

  Hello

  What type of material is actually causing the problem? Is there more information the Fix It center offers you?
  I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.
  http://support.Microsoft.com/kb/947821
  I hope this helps.

• When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I'm running on Windows using Intel (R) Graphics 4600 8.1

  When I try to print from photoshop cc I get the message "the instruction at 0xb660643f referenced memory at 0 x 00000006. the memory could not be read. I run on Windows using Intel (R) Graphics 4600 8.1. Can someone help me with this?

  Hi Tanuj,

  Thanks for your reply. The problem seems to be a damaged printer driver. I tried to print from my laptop computer rather than my PC and that worked OK. I downloaded the latest driver for the Epson 3880 but then find that the print spooler has become invalid. When I restarted the print spooler, everything worked again and I'm able to print as usual.

  Concerning

  Gordon

  Gordon Gentles

  [email protected]

• Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them :(

  Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them

  Is working this morning!

  Depends on your operating system

  Go to google, try typing in

  Change the Windows permissions

  or

  Change the permissions of Mac

• Two devices Fax listed when you try to print from Internet Explorer metro

  Hello.  Our Pro Officeject 8600 is ranked twice as "Fax - HP Officejet Pro 8600" when access to the 'Peripheral' charm in Windows 8 Pro 64 bit and try to print from Internet Explorer of Metro.

  One of the two brings in fact appear Fax options, while the other will be printed as usual, but you must use some trial and error when you try to print.

  It is specific to IE connecting the metro interface as the desktop IE printer appears as normal.

  I want my printer to appear as a printer and not a fax, so that I don't have to guess...

  Any help would be appreciated.

  Thank you.

  This isn't a problem from the point of view that the software works in fashion, it is supposed to. When you install your printer it installs two drivers, one for fax and one for the printer, because they are two totally different functions. If you find it difficult to distinguish between them, I would recommend renaming as I mentioned above.

  Uninstall and reinstall the printer will not change this fact.

  I would like to know if this is the information that you need to hear!

  Have a wonderful day!

• Having 2 error message when you try to connect to in__1. Unable to connect to a windows service__2. Location is not available

  System: Windows Vista Ultimate Edition

  Whenever I try to open the computer, I get two error message.

  1. impossible to connect to the service awindoes: Windows could not connect to the user profile service.  This problem prevents limited users to logon to the system.  As long as administrator, you can go through the system event log to see why the service did not respond.

  2 C:\\Windows\system32\config\systemprofile\Desktop makes reference to a location that is unavailable.  It could be on a hard drive on this computer or on a network.  Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again.  If it can't be located, the information may have been moved to a different location.

  Please help, I have of these massege error for some time.

  Try the system restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Try to connect as a different user if the symptoms were not your user profile is damaged.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope I could help