Conditional code of liquid to the output an image if webApp field is empty

Similar Questions

• How to check & & condition in the output text

  I want to check a condition like this in the output text
  
  < af:outputText id = "t1" value = "#{empty bean.text1 & & vacuum bean.text2? '} '. Temp1': "temp2" "/ >"
  
  It throws an error saying "name expected instead of.

  If you change the el expression in the source of your jsff/jspx file tab, use the el below:
  

  If you use the el: in the property inspector, and then it gets converted to the above expression.

  It will be useful.

• Deletion of a link when the database field is empty?

  Using ASP and Access - I make a list of organizations using repeated regions. Some require a link to their Web site, others do not. The code I use is fine when an organization has a web address. However, those who still do not receive the "Web Site" linked text, but lacks a URL in the (orgWebsite) relevant data field is empty. I need to remove the linked Word and the void < a > HTTP: / / < /a > that is rendered when a field is empty.
  Ideally, I want that he continues to behave as it does when a URL is present on the database, but leave no case of absence code. I'm pretty sure this means him < A HREF = and the "Web Site" text must be contained in the ASP code, but none of my attempts worked. Appreciate any assistance on this...
  Thank you

  Assuming that your URL is stored in a field called URLLink then the code
  looks like this

  < %="">< br="">ThisLink = recordset.fields.item("URLLink").value < br=""> ThisLink if <> "" then< br="" >="" %="">
  Website: http:// <%=ThisLink%> ' > <%=ThisLink%>
  <%End if%>

  --
  Paul Whitham
  Certified Professional Dreamweaver MX2004
  Adobe Community Expert - Dreamweaver

  Valleybiz Web design
  www.valleybiz.NET

  "Lancs" wrote in message
  News:e6qddr$f9v$1@forums. Macromedia.com...
  > Using ASP and Access - I make a list of organizations using
  > repeated
  > regions. Some require a link to their Web site, others do not. The code I am
  > help
  > right when an organization has a web address. However, those who don't
  > still
  > get the linked 'Site Web' text, but it lacks a URL as the relevant data
  > field
  > (orgWebsite) is empty. I need to delete the linked Word and the void
  > HTTP: / / returned when a field is empty.
  > Ideally, I want to keep it to behave as it does when a URL is present on
  > the
  > database but leave no case of absence code. I'm pretty sure that this happening by the
  ><>
  > HREF = and the "Web Site" text must be contained in the ASP code but
  > no
  > my attempts worked. Appreciate any assistance on this...
  > Thank you
  >
  ("> http://<%=rsOrgs.Fields.Item("orgWebsite "). Value% > "> Web site
  >
  >

  < / [email protected] > "

• Impossible to activate and deactivate the button "submit" all keeping the condition on the output parameter

  Hello

  I try to enable and disable the submit button based on the status of output parameter that I call in lov.

  Concerning

  Asia.

  
  

  Hi AJ,.

  Thanks for the reply

  I tried the method above, but it does not work.

  I am trying to enable and disable the submit button based on two input parameters and an output parameter.

  Based on two input parameters, I'm able to get the output parameter, and if the output parameter is "S" then iam allowing the submit button.

  on the other

  disable the submit button.

  Here is my code:

  IAM calling this co

  OASubmitButtonBean submitbean = (OASubmitButtonBean) webBean.findChildRecursive ("Submit");

  String crreason = pageContext.getParameter ("Reason")';

  Invnum string = pageContext.getParameter ("InvoiceNumber");

  String status = "";

  String ValidationDesc ="";

  OADBTransactionImpl oadbtransactionimpl = (OADBTransactionImpl) getTransaction ();

  Try

  {

  String sql_qry = "BEGIN WEPIS_CM_DM_PKG. WEPIS_CM_RAISE_VALIDATION (P_CM_REASON =>: 1, P_INVOICE =>: 2, P_VALDIDATION_S "+)

  "(TS =>: 3, P_VALDIDATION_DESC =>: 4); END; « ;

  OracleCallableStatement sqlstmt = (OracleCallableStatement) oadbtransactionimpl.createCallableStatement (sql_qry,-1);

  sqlstmt.setString(1,crreason);

  sqlstmt.setString(2,invnum);

  sqlstmt.registerOutParameter(3,Types.CHAR);

  sqlstmt.registerOutParameter(4,Types.VARCHAR);

  sqlstmt. Execute();

  status = sqlstmt.getString (3);

  ValidationDesc = sqlstmt.getString (4);

  If ("S".equals (status))

  {

  submitbean.setRendered (true);

  }

  on the other

  {

  submitbean.setRendered (false);

  }

  }

  catch (SQLException sqlexception)

  {

  throw OAException.wrapperException (sqlexception);

  }

  catch (System.Exception Exception)

  {

  throw OAException.wrapperException (exception);

  }

  Concerning

  S.Asia

• 2014 CC Dreamweaver takes conditional text? Specifically, I can put all my tech in a location data and the output of the subsets of data (doc Admin against doc user versus doc Marketing) based on tags or other methods?

  CC of Dreamweaver takes conditional text? Specifically, can I put all of my tech data in a doc of DW and the output of the subsets of data (doc Admin against doc user versus doc Marketing) based on tags or other methods?

  I don't have any front-end text editor (such as FrameMaker) or I'd do it here. Dreamweaver can do this without complex workarounds or procedures not supported?

  Thank you very much.

  Mike the Newbie

  OK, that's fine. DW not conditionalization and I'll see if I can get what I need to do or find another approach.

  Thanks a lot for your help.

  Michael

• Where is the KNOCK code in the output of the HTML5

  Hello to all I will try to find the code for the table of contents in the output of HTML5. I found this line in the file index.html

  < div id = "toc" style = "left: 0px;" position: absolute; -webkit - tap-highlight-color: rgba (0,0,0,0);' > < / div >

  But that does nothing to change it. I'm currently looking in the CSS but I'm going nuts. What I have to do is go down the tag div 20-pixel around TOC.

  Someone at - it a response?

  Put this javascript in the first slide to run when loading

  toc.style.marginTop = "20px";

  is that what you want?

• Conditional tags - how to exclude files from the output

  Hi all

  I am trying to exclude certain topics (books) of the generation by applying the conditional tags. It works very well and these books are excluded from the table of contents; However, section files are not excluded that the output size is exactly the same. The items I must exclude are huge video tutorials. It seems that HR changes only the TOC when applying conditional build tags.

  Any ideas how to ensure that the files of excluded topics are not in the output?

  Thank you

  Hello

  If the subjects are actually excluded or not depends on exactly where you added the conditional tags. If you haven't been tag elements of the table of contents, all that is remove entries from the table of contents.

  My suggestion is to wipe the table of Contents formatting per tag and add the tags to the subjects themselves. Then, they should be excluded. And when they are excluded, they will disappear also the table of contents.

  See you soon... Rick

• Does anyone have a work around for the design on PowerMac G5 2005 flaw that causes noise interference on the outputs? (Audiophile, sound engineer)

  OK, here's my problem - I have a set of audio interface Protools Digi 002 via Firewire 400 on a PowerMac G5 I was lucky enough to be given last year. I finally managed to connect my home recording studio system, he wire of mixer etc, but when I listen to the music coming from the outputs of the Digi 002 there in a great cacophony of audio interference, so much and so well, when I mount the system I can move my pointer between two monitors and it plays a different frequency of buzz. Everytime I open a window, Soft etc it is more electronic noise.

  He took a while to limit, but after reading this excerpt from wikipedia, it seems that it was a fault common to this particular model until Apple released the revised version of the B of the G5 (?);

  ' The first versions of the dual processor G5 have problems of noise . The first is ground loop- based interference,^[5] that sometimes causes noise seeps into the outputs audio analogue. This bug has been fixed in Rev. B G5.'

  and

  ' Well that the noise problems do not prevent computers affected work, they asked problems for audio professionals and enthusiasts as well, especially for models to liquid cooling, which had been expressly designed as mechanically quiet for listeners. "

  Well, that's no euphemism - in fact it makes the mac completely useless for my needs, I need the outputs clean digital noise to send for outboard effects/EQ/etc.

  As it was a common fault, I was hoping someone might be able to shed some light on a workaround solution, as I can't imagine recording ground studios just stop until this has been fixed by releasing a new G5?

  The only idea that I came up with so far is to buy a transformer of isolation, but I'm not entirely convinced that will solve the problem?

  Any help on this would be greatly appreciated!

  Thanks in advance

  Have you tried CHUD Tools & turn off NAP mode?

  The first versions of the dual processor G5 have problems of noise . The first is ground loop- based interference,^[5] , which causes sometimes analog audio output sound leaks. This bug has been fixed in Rev. B G5.

  The second problem of noise came from his "tweets", which can be triggered by power fluctuations. For example, display or hide the Dock makes a short beep. Many blamed the power supply used in the G5 as the cause, but this theory has never been confirmed. A very effective workaround is to disable microprocessors 'siesta' using Apple CHUD Tools, but this was not recommended by Apple. This noise problem has not set until the generation of dual-core G5s was produced, but it does not affect the model of "Late 2004" (at least there have never been reports). Draw of power fluctuation has been later attributed to the lack of power management features in processors simple heart. ^[6] Apple eventually posted information bug tweets on its support site. ^[7]

  Although noise problems did not prevent the computers assigned to work, they were problematic for audio professionals and enthusiasts as well, especially for models with cooling liquid, which had been expressly designed as mechanically quiet for listeners.

  https://en.Wikipedia.org/wiki/Power_Mac_G5

  Just one last note on the use of CHUD tools to disable the 'Nap' on the G5 Dual functionality: restart your machine reactive 'Nap '. You may have already seen this on the Apple forums. Kind of a bummer - although I rarely shut down my machine. In any case, running with 'Nap' off today seems to have resulted in a significant increase in general speed/responsiveness for me (I'm still running the stock 512 MB RAM, with another 1 GB on the way).

  «Matthew S.»

  http://www.xlr8yourmac.com/G5/G5_noise_tips.html

• How to clear the output buffer, possibly resize and burn again, before you begin the task of output

  I use PyDAQmx with a USB-6363, but I think the question is generic to DAQmx.

  I have an output buffer that I want to be able to (re) write to without starting the task output.

  More specifically, I have a graphical interface and a few sliders, the user can move.  Whenever the slider changes, a new set of values is loaded into the buffer output through DAQmxWriteAnalogF64.  After you set the value, the user can click on a button and start the task output.

  In some cases the change in cursor does not require a change in buffer size, only a change in the data.  In this case, I get the compalint following DAQmx as they tried writing:

  The generation is not yet started, and not enough space is available in the buffer.

  Set a larger buffer, or start the generation before writing data more than content in the buffer.
  Property: DAQmx_Write_RelativeTo
  Value: DAQmx_Val_CurrWritePos
  Property: DAQmx_Write_Offset
  Corresponding value: 0
  Property: DAQmx_Buf_Output_BufSize
  Corresponding value: 92

  In other cases the change in cursor requires both change in the size of the buffer and data modification.  In this case, I get the following, but only after that do a few times each time increase the size of the writing.

  DAQmx writing failed because a previous writing DAQmx configured automatically the size of output buffer. The size of the buffer is equal the number of samples written by channel, so no additional data can be written before the original task.

  Start the generation of before the second writing DAQmx or set true in all instances of writing DAQmx Auto Start. To gradually write to the buffer before starting the task, call DAQmx Configure an output buffer before the first writing DAQmx.
  Task name: _unnamedTask<0>

  State code:-200547
  function DAQmxWriteAnalogF64

  I tried to configure the output via DAQmxCfgOutputBuffer buffer (in some cases, by setting it to zero or a samples, then save again, in an attempt to clear it) but that doesn't seem to do the trick.

  Of course, I can work around the problem by loading data only when the user clicks the end button, but not what I'm asking here.

  Is it possible to "remake" the writing of output before you begin the task?

  Thank you

  Michael

  Today I have no material practical to validate, but try unreserving task before writing the new buffer:

  DAQmxTaskControl (taskHandle, DAQmx_Val_Task_Unreserve);

  With a simulated device, he made the error go away in case the buffer is the same size.  You will need to validate if the data are in fact correct, but I think it should be (unreserving I would say reset the write pointer so the old buffer are replaced with the new data).

  I always get errors when you try to change the size of buffer if (on my 6351 simulated).  I posted some similar mistakes about the reconfiguration of the tasks here, I guess it is possible that this issue has also been set at 9.8 (I always use 9.7.5 on this computer).  If the behavior is still present in the new driver, and also appears on real hardware (not just simulated), then it seems that this is a bug of DAQmx someone at OR should be considered.

  I wrote a simple LabVIEW VI that captures the error in order to help people to NOT reproduce it:

  

  The best solution at the moment would be likely to re-create the task if you need to change the size of the buffer (or avoid writing data until you are sure what will be the size of buffer).

  Best regards

• Headers to the output spreadsheet?

  Hi all. I am quite new to LabVIEW and want to headers for my spreadsheet to exit. I made a table 1 d of channels with appropriate titles. I have difficulties to get the data I want and the headers to be included in the output file. Another task, I want to be able to do is to be able to replace only the data in the case where I want to put in a specific set of values. For example, I have 12 columns that have headers, but what if I only want to view the data for only some of the columns and leave the rest blank, but retain the headers show? I am not able to join the code.

  Thank you.

  Szklanam wrote:

  Hi all. I am quite new to LabVIEW and want to headers for my spreadsheet to exit. I made a table 1 d of channels with appropriate titles. I have difficulties to get the data I want and the headers to be included in the output file.

  If you show us your code how do we tell you what you're doing wrong? We are not mind readers. The classic way to do this is to call writing to the spreadsheet file and pass it the table 1 d of channels and then call it with the data that you intend to write (for example, your 2D table). Of course, it will be with the input value "append" true.

  Another task, I want to be able to do is to be able to replace only the data in the case where I want to put in a specific set of values. For example, I have 12 columns that have headers, but what if I only want to view the data for only some of the columns and leave the rest blank, but retain the headers show? I am not able to join the code.

  This seems to be the same question you have to ask: http://forums.ni.com/t5/LabVIEW/Is-there-a-way-to-select-a-certain-box-of-elements-from-a-csv/m-p/19... If this is the case, please keep your discussion in this thread. If this isn't the case, please explain how it is different.

• The output of a stacked sequence index

  Hello world

  I write code in which I instantiate objects much when I first start my code and place objects in a table that is subsequently used as a lookup table in the operation.  It takes a lot of space on the block diagram and it is difficult to understand for the user who is not familiar with the code.  Is it possible to create something like a sequence of plate which may have a single indexed exit tunnel?  I want something like what you get when having a tunnel on a loop for, I want just every single itteration (unlike the loop for).  I have included a picture of what my schema currently looks like for reference.  You can see that I have create all the objects with unique information (ID, order number, etc.) and then create a table with them.  I would like for each of these objects in an image of a sequence that is stacked with a single indexed output instantiate (if possible).

  Thanks for the tips!

  -Eric

  Option 1: use a Subvi

  Option 2: Use a loop FOR as a sequencer.  Instead of the structure of stacked sequence (or flat), put a case inside a loop structure FOR and wire the i for the selector of the case.  Then, in each case, you can initialize a different class.  The output can then be autoindexed.

• Read the output values after each step runs in the User Interface of LabVIEW

  Hi all

  Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1

  Problem: is there a way to run the following steps programmatically and get values out of each of them?

  I have already extended a bit a complete interface IO for TestStand load any sequence, choose among the measures and execute step by step (something as an alternative to the steps run selected). What I'm trying to do is to add some actions between each step and do in the UI (I can't change the sequence!), so I start the NewExecution with some previously configured InteractiveArgsParam and option breakAtFirstStep set to true. Eventually I do just something like step over when debugging the sequence and it works well, but I didn't do well a way yet to read the output values of the place...

  So, if I wait before the end of the run I can read my results by treating the ResultObject, but it works only after the completion of the test sequence. Because I wanted to stop after each step, read the values, do some actions and continue to the next step, I've tried to register a running Trace event reminder View Manager. I see that after each step is executed, this event is fired, but when I try to read that a ResultObject returned in the event data it is not filled with values (ResultList seems to be empty?). Is this a correct behavior or maybe I'm reading the wrong way? (It's the same VI regarding the reading of the ResultObjects after the sequence ends and there it works very well for tables, containers and other types of data).

  As I mentioned I can't change Test sequences, I can not add a UImessages.

  What are my options? If the trace event returns output all the values from each steps or is it just used to check the status? Or maybe there's a completely different approach to this issue?

  Thanks in advance for your suggestions,

  Best regards.

  When you manipulate the UIMessage trace (you need this before the return of the event or you will present the race conditions), download myuimessage. Thread. Then call Thread.GetSequenceContext (0, & Iplease).

  And then on the context of the sequence, either go to PreviousStep.Result if it exists, or watch Locals.ResultList.

  Trace events occur between the steps executed step the more recently is the previous step, but it is also a trace event to the beginning before any measure have run at this time, there will be a previous step.

  Hope this helps,

  -Doug

• What is the best way to run two concurrent programs using the output of either executing the other?

  I wanted to just kind of get a notice of some people here. I have two main screws the first is a data acquisition system that displays 99 different sensors and which feeds on these data in a table. The second is a real-time processing system that is designed to take the painting and do many calculations. The two output data from screw at the front that I want to see, so I don't want to use just as a Subvi.

  Is there a simple way to run two screws, using the output of the data acquisition system to power the processor so that you can easily see the signs before two screws? I had thought to simply copy the code from the processor in real-time in the DAQ VI, but I fear that the VI resulting will be very large and unsightly.

  On a side note, I'm more thinking about this? I apologize if this is a stupid question, it has been a long week... aaaand it's Wednesday.

  Look at the Architecture of producer/consumer.  It will be a good starting point, even if you find that you need to change.  When performing data acquisition and processing of tasks in parallel loops, they can both run simultaneously.  Both can feed data to the main draw of the VI.

  I'd probably use three loops with the third being the user interface only.  All that must be displayed to the user is sent to the GUI of the acquisition of data or processing loop loops and commands or entered by users are returned in these loops, probably through queues.  The wall of the VI of data acquisition and processing VI are never displayed to the user.  Especially the treatment, because it runs on a system in real-time, should avoid synchronization issues that can present a graphical interface.

  Lynn

• Change the amplitude of the Agilent function generator output while the output is on

  Hello

  I am writing a program to scan the amplitude of a sine wave of a function (Agilent 33210 a) generator output. I have two sets of pilot example: Agilent 33xxx and HP33120a (the first one uses VISA, IVI 2 uses).

  Using the example of driver code, I changed to generate a sine wave to 1Vpp, wait 1 sec, and then modify the amplitude of 0, 5V. I have attached the images in my field that show what happens when I do that. The two examples cut first exit before Relighting with a different amplitude. 33xxx driver takes 140ms for change, and has a strange burst between the two signal. HP3120a driver takes 30ms and cleaner air.

  Agilent 33xxx example using:

  \

  HP33120a example using:

  

  

  I would like to have the change is instantaneous. When you use the generator manually, I can turn the button and change the output in real-time without delays.

  Thanks for the suggestion of Mateus, but I am trying to automate this process of my best. Change the VISA pilot is the direction I want to go.

  Thank you crossrulz... I wrote a new issue VI of the Standard waveform VI set up so that it simply writes the new amplitude control and none of the other things. Worked like a charm! Now the waveform changes amplitude without turning off the exit. I also checked to see if re-defining the shape of sine wave (even if the original is also sinusoidal) was the cause of the delay as you suggested, and you were right. Thanks for the help!

  

• Using the output with 6009 or 6216 possible buffer?

  Hello

  I have a USB6009 and a USB6216. I need to generate a signal by using the analog output and I would use the output buffer. My questions are:

  -The USB6009 has an output buffer? I always get an error, but I know from experience that this device is very limited, so I wonder if they have not only an output buffer... (Programs in input buffer are not a problem at all).

  -J' took the USB6216 and I tried the example WfmGenUp.c downloaded from somewhere in the area of the developer (sorry I lost the link but fix the code) but I am not all analog output signals and after you press ENTER to stop the program (depending on the show) I get this error message:

  NO MORTALS RUN - TIME ERROR: 'WfmGenUp.c', line 113, col 9, id thread 0x0000088C: DAQmxStopTask function: (is-200016 return value [0xfffcf2b0]). Measurements: On-board memory precision passing. Due to the limitations of system and/or the bandwidth of the bus, the driver could not write data to the device fast enough to track the rate of output of the device.  Reduce your sampling rate, change the method of transfer of data (from interruptions on DMA), use a product with more on-board memory or reduce the number of programs that your computer runs simultaneously. Task name: _unnamedTask<0> Code of State:-200016

  I don't know if the problem is just that the 6216 does not support the output buffering or the other...

  -So, if the output control is not supported by 6009 or 6216 what would be the best way to constantly generate signals to 100 s/s?

  Thank you very much

  Kristel

  Hi Ryan,

  the USB-6009 case has 150 s/s softwaretimed AO, so you won´t be able to use AO stamped with the module.

  The USB-6216 supported in the analog output buffer, just follow the recommendations that the driver gives you,

  for example by reducing the sampling frequency, if there is an overflow memory due to the limitations of system and/or the bandwidth of the bus.

  Experiment with the parameters and the basic to see in what range of sampling it works.

  You can find appropriate examples

  ANSI C:

  C:\Dokumente und All Anwendungsdaten Users\Dokumente\National Instruments\NI - DAQ\Beispiele\DAQmx C\Analog Out\Generate Voltage\Cont Gen Volt Wfm - Int Clk ANSI

  LabWindows CVI:

  C:\Dokumente und Users\Dokumente\National Instruments\CVI\samples\DAQmx\Analog Out\Generate Voltage\Cont Gen Volt Wfm - Int Clk Anwendungsdaten All