Conditional display does not properly

Similar Questions

• Re: x 505-"turn off the display" does not properly

  To make a long story short, I had a load of problems with my Toshiba Qosmio X 505. I talked to tech support and they had me completely clear the computer and reinstall the OS. Everything has been fine for days until today!

  For some reason any whenever my screen turns off (for energy saving), I can't get my computer to respond. I don't know if he's asleep, going into hibernation mode, or even the difference between one of these things, but when I press the buttons, move the mouse/Touchpad, try multimedia keys, the power button, nothing makes my computer come back. I have to hold the power button / stop and completely restard come back again the computer.

  Why is this happening? It worked great for everyday, but I think it has something to do with the NVIDIA driver update I downloaded. It is the main change I have made to the computer yesterday and now it seems to do. Does anyone have recommendations? How can I make my computer stop doing that? I have all the options of my black screen off for now, but that does not seem a good solution for this problem that he used to work properly.

  Hey,.

  Akuma is right, you should only use the display drivers provided by Toshiba and not nVidia. The nVidia drivers are not pre-tested and that's the reason why they can cause such problems. Also they don t have an overheating protection, installation happens on your own risk.

  If you need to test it with the drivers from the official website of Toshiba. Prior to installation, remove the current display driver, and then restart the computer. Then you can begin with the installation of Toshiba display drivers.

  In the worst case it of necessary to reinstall the whole system again, but before that, you try a system restore to an earlier point.

• Computer takes forever to stop + display does not properly

  Hello

  My computer began to take a long time to shut down (10-15 minutes) and then crashes with blue screen of death...

  Also when it comes on sometimes it loads but I have no display and my screen goes to power saving mode

  If I reboot, it takes forever to shutdown, then crashes, restarts, and the screen does not work until I'm physically hold the power button to turn off and then turn it on again, then the display works fine again. This only started happening in the last day or two, after I did a system restore.

  Any ideas what could be the problem?

  Thank you, Dan

  Hi Dan,.

  ·         You receive an error message or error on blue screen code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Please see the following articles for more information on the set of the computer:

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

   

  Demo: Smart ways to turn off your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-smart-ways-to-turn-off-your-computer

  You can also see the following article for more information on improving the quality of display:

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

  Let us know if that helps.

• Conditional statement does not properly on the button

  OK, this is driving me batty...

  I'm almost finished with my style of play "Wheel of Fortune", and this thing keeps me:

  Here's my current little piece of code I have a button given 'letter '...

  on (release) {}
  If (_root. Acheckmark._visible = true) {}
  _root. AScore = _root. AScore + _root. Appointment;
  } ElseIf (_root. Bcheckmark._visible - true) {}
  _root. BScore = _root. BScore + _root. BPoints;
  }
  }

  'Acheckmark' and 'Bcheckmark' are video clips that determine what team is playing currently, based on their visibility.

  "AScore" and "BScore" are variables attached to two text fields that contains the score of each team.

  "Appointment" and "BPoints" are variables that contain the current value that the wheel stopped on after he gave.

  From now on, if I move the check mark on the side A or B, the current points are still awarded to the team has, and the check mark will move to this side. How can I assign the correct points to the correct team? As always, any help will be greatly appreciated.

  Here's what happened after clicking on the button of the letter 'E' (the wheel stopped on 500).

  

  As you can see, the button caused the team A check mark appear and received points for the team.?

  use the double equal (==) to test for equality.  and the combination of your conditional else-if Branch makes no sense.

• Monitor display is not properly in Windows XP sp3

  Original title: Windows xp sp3 does not properly

  Hello, I do not know if this issue belong to the material division of the forum. I have an old system who have windows xp sp3. It was working fine until week couple but after a few days when I switched it on the screen is not displayed correctly.

  All the colors randomly displays as a spot on the screen and the other letters in a sentence is missing. I tried in safe mode with just visible in debug mode, but it doesn't happen in the journal to the screen. I can not even reinstall windows xp. Now I'm not able to understand if it's the problem of the operating system or a malfunction of certain components of the computer. Please help me.

  Thanks in advance.

  Hello

  Method 1:

  I suggest you to start the computer using the VGA Mode.

  (a) restart the computer

  (b) press F8

  (c) in the start menu

  (d) choose the option

  (e) activate the VGA Mode

  This option starts Windows in mode 640 x 480 using the current video driver (not Vga.sys). This mode is useful if the display is configured to a setting that the monitor cannot display.

  Reference:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  If you are able to start the computer using the VGA Mode, you can perform a system restore to the date where the computer worked well.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point if any. You can also create Safe Mode system restore points. System Restore affects the Windows system files, programs and registry settings that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  If the problem persists, you may need to contact the manufacturer of the monitor to the stand.

• COQ2014: COQ2014 AMD/ATI does not properly

  2 messages warn me for "AMD/ATI does not properly" and "search solution AMD Display adapt-ATI Radeon Graphics Cards.  Search for updates, solutions with nothing appear.  I don't know what that precisely uninstall nor where the new material.

  Thank you!

  Dear customer,

  Welcome to the HP consumer's Support Forum!

  Please try and uninstall the graphics driver AMD/ATI to address current from the control panel > programs and features.

  After you have uninstalled the current graphics driver, please try and install the following driver and check:

  Suite software Catalyst:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+32

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  GR1
  Although I am an employee of HP, I speak for myself and not for HP

• Pavilion 15-e016tx: usb controller not installed or don't display does not correctly

  Two days back, I changed my windows 7 32-bit operating system. Everything is going well except the usb controller.  In the driver manager, it's show marks of yellow color. It is not installed display driver or does not properly. I could not find this driver. I am not able to use my USB. Please suggest a way to get rid of him.

  Hello:

  Download, unzip and run the file setup.exe from the link below...

  https://Downloadcenter.Intel.com/download/21129/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-7-series-C216-chipset-family

  See my blog post on how to get the graphics to work...

  http://h30434.www3.HP.com/T5/notebook-display-and-video/solution-for-getting-HP-notebooks-with-the-Radeon-HD-8670M/TD-p/3601605

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• Equium A300D - 16 c - display does not

  My girlfriend has an Equium A300D - 16 c which had some problems lately.

  In recent months, whenever she turns on the system, the display does not pull upwards and it takes several tent for lights.

  The strange thing is every time that happens, the system boots normally always that you can hear the Windows 7 startup sound.

  I'm looking for in this question for some time now and I'm running out of ideas.
  Initially, I thought that it could be a wiring problem but by stripping the laptop down, I found that the cable was still firmly in place.

  I also tried to remove the RAM, HARD drive and DVD drive, but it still doesn't pull upward. On the odd occasion she started upward when you do it, but after restart, it has not started again.

  I think that this could be either a transmitting power or the mother board is on its way. This problem has worsened gradually (it took more than 20 attempts it turn on and off this morning) so finally he come not at all.

  To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.
  I tried to keep the power with no energy source button to unload the system, but it does not help.

  I also noticed that if you hear it boot and close the cover, the reopening of the display lid will come on but with the bad (1024 x 768) resolution that has intrigued me even more.

  Any ideas on what could be the problem? I would repair it rather than just buying a new as its still a decent system apart from this problem.

  > To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.

  This means that you can use the laptop as part of the external screen, but it does not work with the internal screen?

  This means that the internal display module isn't OK. It probably needs to be replaced.
  But this does not explain the problems while turning on the laptop.

  In the worst case the mother for laptop AND the internal screen are affected, but it would be really strange and rare bad luck

• updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  A lot of people is affected by this problem, and Apple has worked on the issue.  Some found the following steps useful for this issue:

  Go to iCloud.com and select settings once you are connected.  Click on your device listed there and remove them from the account (not typing not erase or lost mode).  Restart your device and must ignore this lock of Activation screen because you actually disabled the lock by removing the device for iCloud.com

  I hope that helps!

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• Download StarWar 6 pack - I get "movie will play not display does not support HDCP" I have a MacBook Pro '11 '.

  How to play movie with HDCP?   What is it?  Why he won't play on MacBook Pro 2011?

  Hello TheBell,

  Thank you for using communities of Apple Support.

  I see you found a mistake that "movie will not play, the display does not support HDCP" error when you try to play a movie downloaded on iTunes. I have a couple of things I would like that you try to refine the question.

  First, start your computer in safe mode and test the question.

  Try safe mode if your Mac does not end commissioning

  If after the test in safe mode, the issue is still in progress, and then create a new user and test in the new user.

  OS X Yosemite: set up users on your Mac.

  If you still have questions, additional information would be useful. Using an external monitor? If so, test with just the internal display on the MacBook Pro. All the other things you notice?

  Best regards.

• EQUIUM A60: graphic ATI does not properly

  I HAVE AN EQUIUM A60 1 YEAR MESSAGE SUDDENLY CRASH SAID: ATI GRAPHICS CARD DOES NOT PROPERLY.
  CAN'T FIND THE DRIVERS UPDATED ON ATI OR MICROSOFT HELP PLEASE?

  Hello

  Can you tell me when this message appears?
  First of all, you can try to update the graphics driver from Toshiba. It is a first step that you can try.
  Check this page for the driver download.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Thunderbolt 10 Windows display does not work

  Hello

  I'm trying to implement the following configuration:

  I have 2 Macs:

  • Mac Mini (late 2014, 2.6 GHz Intel Core i5;) Intel Iris 5100 1536 MB) with Windows 10 (Home) installed through Boot Camp
  • 27 "iMac (late 2013; 3.5 GHz Intel Core i7;) NVIDIA GeForce GTX 780 M 4 GB) installed with OS X El Capitan

  I want to use the iMac as a display for the Mac mini, but it seems that thunderbolt display does not work (I can not upgrade to Windows 10 by pressing Cmd + F2)

  Could you please help to solve this problem?

  Kind regards

  Dmitry

  Please see use of your iMac as a display with the target - Apple Support Display Mode and Thunderbolt Firmware Update 1.2: continues to reappear and ports Thunderbolt and the target Display Mode may not work - Apple Su... .

  If command-F2 does not work

  If your iMac won't go to the target Display Mode when you press Control-F2, check these things:

  • Make sure the iMac that you try to use it as a screen that supports target Display Mode.
  • Make sure you are pressing Control-F2 on the keyboard which is connected to the iMac to use as a screen.
  • In the keyboard system preferences, if the check box is enabled to use all F1, F2, keys etc. as standard features, changes of command-Fn-F2 key combination.
  • Make sure that your Mini DisplayPort or Thunderbolt cable is connected to both computers.
  • If you are currently connected to the iMac, you want to use as a screen, try to connect to return to the login window. Then again press Control-F2.
  • Some old keyboards Apple and third-party keyboards allow may not control-F2 to toggle display modes. In this case, use the keyboard that came with your iMac to activate / deactivate the target Display Mode.
  • If your iMac is currently started in Windows, it will not be in target display mode. Target display mode is not supported in Boot Camp.

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.