Monitor display is not properly in Windows XP sp3

Similar Questions

• my firewall does not work in windows xp sp3! ??

  my firewall does not work in windows xp sp3! ??

  What kind of error do you get?

  It could be the problem with malware infection or Firewall Service, try to run full scan with:

  http://OneCare.live.com/site/en-us/default.htm

  And remove all malware and see the result.

• Pavilion G6 1006sh: HP Pavilion G6 1006sh external display does not work with Windows 8.1

  Hi all

  After you perform a clean installation of Windows Professional 8.1 on my Pavilion G6 1006sh I can't use my external Samsung monitor connected to the HDMI port.

  The windows installation is well unrolled without all the problems of the operating system had builtin readers for all devices. So there is no unknown hardware in Device Manager there is no sound, wifi, LAN, etc. In regards to the video card, I see two different devices. There is a generic VGA in Windows and there is an AMD Radeon HD 7400 installed M. The AMD Catalyst software has been installed successfully. In the graphic properties of windows that I can choose from two different outputs video, one is the general Windows VGA is the Radeon. However, windows detects monitor connected only on VGA General (i.e. integrated laptop display) and nothing on the Radeon so I can't use my external monitor.

  Of course, I tried to restart the laptop / monitor repeatedly, unplug / plug the HDMI cable but without success. When I plug the HDMI cable into the laptop the screen displays a message that it is connected, but there is no input signal. The HDMI port on monitor and works in the laptop I used the same setup with Windows 7 x 64 Professional without any problem. It is only the operating system that has changed.

  I tried to remove the General VGA device to force using Radeon, but after restarting it that nothing posted on the screen, I saw nothing on built-in or external monitor so I had to restore a previously saved system configuration.

  I tired to install the latest version of the graphics driver Radeon downloaded from the website of AMD, but crashed and restarted during the installation process of Windows.

  Please help me with this question or make a statement that this version of Windows is not supported on this machine and I must therefore go back to the old system.

  Configuration:

  model: HP Pavilion G6 1006 SH

  RAM: 2 x 4 GB

  OS: Windows 8.1 Professional x 64 (HUN)

  Drivers: installed and automatically updated by windows

  Antivirus: Symantec Endpoint Protection 12.1

  Thank you

  Zoltan

  Hi there @nzole

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have installed Windows 8.1 on your system, but now you can not detect an external HDMI monitor. I'm happy to help you with this.

  First of all, in response to your question, this model is not supported for windows 8.1. It was sold only in the versions that have been configured for Windows 7.  That would mean there is no drivers especially customized by HP for this model for Windows 8.1.  It is possible that you could find a suitable drive for a model that Windows 8.1 which can be strong support enough in terms of hardware, that his driver might work, but there is no guarantee.

  Here is the support page for your model: HP Pavilion g6-1006sh Notebook PC

  Products HP - what happens if I do not see my operating system?

  Do you still have the recovery partitions, or you did a set of recovery discs, before installing Windows 8.1?

• Qosmio F50 - Fn keys not working not properly on Windows 7

  Hello.

  Install Dual Boot with
  * genuine Vista,
  * 7 RC1 64.

  All the drivers are OK on Seven 64 (some require to accept Vista compatibility mod to work properly - ALPS Touchpad, for example), except the Add Package value:
  * No Flash Cards.
  * Panel buttons work fine. Except the Dolby button which does not (beep, but nothing else).
  * Keys Fn work partially:
  Bq. -His volume, brightness and a few other basic functions (caps and numlock, etc.) are well recognized by seven. \\-Sound it / off, in sleep & sleep, switch video modes Panel/external, touchpad ON / OFF do not work.
  Tried the usual (VAP of uninstall, reboot and clean, restart and reinstall, then restart), but nothing more.
  I use the latest BIOS update available.

  When we look into msconfig, I saw only one executable file, HSON, islaunched at startup, but is never visible in the process list (even having chosen 'Show all processes users'). Is this normal (because it can launch services/DLLs then stop) or not? I tried all modes (XP SP2, XP SP3, Vista) compatibility and admin rights, but it is not yet launched (or self-closing)...

  No matter who with Vista 64 experienced the same problem? Or: matter with Vista 64 a all work keys Fn?
  Any idea?

  Thank you.

  Hello!

  The FN, flashcards, illuminating buttons and keys all these special function keys to the Toshiba value added Package.

  So it of a bit confusing, but you have a problem with Windows 7 or Vista x 64?

  I guess that the VAP does not work on Windows 7 because it s is not designed for this OS and there is no PPV still available for Windows 7, only for Vista.

  If you have some problems on Vista 64, I can recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724𨝜
  The user Raver did publish an interesting solution and maybe this thread is also interesting for you.
  Check it!

  Good bye

• SIRIUS Internet Radio Media Player not working not properly because Windows update installed on my PC

  My Sirius internet Player multimedia radio is not working properly because Windows updates are installed on my pc. updates KB971486 KB974455 KB974571 KB975467 KB975517 KB974155 KB976525 KB974470.  Tested internet radio/media player for sirius on another computer and there is no problem.  Have tried all of the fixes recommended by sirius... This update of windows seems to the source of the problem.

  Does anyone have an idea with security update could be the cause of the problem?  Should I uninstall this?  If I find one that is causing the problem, how can I block it to move again?

  Thank you

  Hi Smwall,

  Welcome to the Microsoft Answers site!

  Do you have a particular error when you try to play?

  Method 1:

  You can try to start check and clean boot if the problem persists. Clean boot boot will help you know if all the background programs conflicted with the player. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Method 2:

  You can try to uninstall the updates one by one in the windows update window and check if the problem persists.

  To uninstall the updates from windows update:

  1. open installed updates by clicking the Start button.

  2. click on Control Panel.

  3. click on programs

  4. under programs and features, click view installed updates.

  5. click on the update that you want to remove, and then click Uninstall.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more details, visit the below given link:

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Method 3:

  Alternatively, you can hide the update, which does not allow the player to play.

  Follow the below given steps:

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. do one of the following:

  ·         Click the link that tells you important updates are available if you have some updates to hide.

  ·         Click the link that tells you optional updates are available if you have optional updates to hide.

  3. Select an update that you want to hide, right-click, and then click hide update. Do this for each update you want to hide.

  4. click on OK.

  For more information about Windows Update troubleshooting visit the below given link:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv7-6b51ea graphics controller does not properly on Windows 8

  Hello

  Since I upgraded to Win7 for Win8 I all right, except that I can't play some games (for example Alan Wake). The graphics are ok on all the cutscenes, but in a kind of negative colors during the game.

  I already tried to uninstall and install the back card (not physically). Also, I tried to update the driver, that does not work either.

  Do you have someone had the same problem and was able to remedy?

  Thank you!

  Alan Wake was working properly in Windows 7?

  How the device has been upgraded to Windows 8?  Was it a new installation or an upgrade on the spot?

  It seems that the system can have switchable graphics with Intel and AMD.  Was this the driver you have installed?  You mentioned that it didn't work.  He did install the driver correctly and the problem persists or not installing driver fail?

• HP Envy 360, model 15-U363CL: Synaptics Clickpad setttings works does not properly in Windows 10

  Synaptics Clickpad v. 19.0.12.95 settings are not saved after Windows 10.  Every time I have stop and restart Win 10, I have to disable "TAPPING" I hate go in the settings of the mouse/clickpad.  Settings have been saved on close and worked well in Win 8.1.  HP needs to come with a new driver.   In the meantime, I guess I might have to go back to 8.1 win?

  Anyone else having this problem?

  Software and driver results for:

  HP ENVY x 360-15-u363cl (ENERGY STAR)

  Synaptics TouchPad Driver 18.1.7.52 Rev.A 188,0 MB 17 July 2015

  You must use Win 8.1 driver as driver Win 10 is not available for the touchpad.

• Tecra M10 - Sound does not work on Windows XP SP3

  TECRA M10 sound does not work with Win XP SP3

  1. the drivers from the toshiba web site.
  2 chipset drivers and audio drivers were reinstalled no luck,.
  3. no mute FN + Esc
  4. feature eat that all drivers ok

  Hello

  If I understand your right all devices listed correctly in the Device Manager and you don t have yellow exclamation points?

  Normally, for high definition sound cards, you need two patches from Microsoft:
  KB835221 and KB888111.
  Normally, these patches are integrated into SP3 but it works only if you install the audio driver after SP3. So, if you have an older version of XP without SP3, you must update to SP3, all first and then install the display driver.

  So in your case, you must delete the current sound driver and restart the laptop. Then use CCleaner to clean the registry and system files. Reboot the laptop. Then download and install the driver of his newest Realtek Hompage.

  Good bye

• Repositioning of DLL system not allowed in Windows XP SP3

  Hello
  I am using windows XP SP3 and I tried to run an application, but this error occurred:
  "The user32.dll system DLL has been moved in memory. The application will not work correctly. The move took place at the beach of anaddress DLL dynamically allocated memory used reserved for windows system DLLS. The seller that the DLL should be contacted for a new DLL. »
  I tried to solve this problem with Microsoft Web site solutions, but it did not work.
  It would be appreciated if you help me in this case.
  Kind regards.

  If all the above does not work, try this, it does!

  Problem Message:
  DLL user32.dll system has been moved in memory...

  Solution:
  1 uninstall windows hotfix KB925902 (if not visible-check "show updates" box on the top of the Add or remove program window)
  2 DO NOT RESTART YET!
  3 Goto automatic updates in Control Panel, check "notify me but don't automatically download or install.
  4 when there are updates, you will get a popup informing you, click top and goto manual (NOT express)
  If MS wants to reinstall this hotfix KB925902, uncheck it and check the box "never warn me about this update again" in the next window.

  This should fix the problem for now, I hope that MS will come out a better fix soon

  Take advantage of :)

• Counter strike 1.6 does not work on windows xp sp3

  Counter strike 1.6 installs on windows xp sp3 but breaks down so that the opening match and return to the windows desktop.

  Hi pinoyvfx,

  Welcome to the Microsoft Answers site!

  a. He worked before on your computer?
  have b. you made changes recently?
  c. do you get error message when your computer breaks down?

  The most common cause of this problem is damaged or outdated video card drivers. Please make sure that your video card drivers are up to date.
  You can also consider to reinstall the drivers for your video card if the game has worked previously on the same hardware you use now.

  Also uninstall and reinstall cs strike and check if it helps.

  Resources for troubleshooting problems in Windows XP:

  http://support.Microsoft.com/kb/307960

  Kind regards
  Amal - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• external monitor display resolution not as an option

  I try to have an external monitor for MacBook Pro (the Captain). While setting up, I couldn't find the proper resolution (1920 * 1080 @60 Hz) in the display settings. I did a nd restart read a lot about this, but I couldn't find a simple solution on how to add a resolution in the option if it is not found.

  hope you can help me configure the resolution to the required resolution.

  After a screen shows what display preferences for the external monitor

• Portege M800 - Touchpad does not properly on Windows 7

  Hello

  In windows 7 the touchad does not work properly, which means I can't scroll pages by dragging my finger on the edges of the touchpad. It worked perfectly witn Vista and now it isn't. I have the 64 bit version.

  I tried new drivers, but there aren't any. How should I solve this?

  Thank you

  Hey Buddy,

  You have the most recent driver for the touchpad? Usually the Vista drivers also work on Windows 7.
  Check this box!

  In addition, the exact model number would be interesting.

• Re: x 505-"turn off the display" does not properly

  To make a long story short, I had a load of problems with my Toshiba Qosmio X 505. I talked to tech support and they had me completely clear the computer and reinstall the OS. Everything has been fine for days until today!

  For some reason any whenever my screen turns off (for energy saving), I can't get my computer to respond. I don't know if he's asleep, going into hibernation mode, or even the difference between one of these things, but when I press the buttons, move the mouse/Touchpad, try multimedia keys, the power button, nothing makes my computer come back. I have to hold the power button / stop and completely restard come back again the computer.

  Why is this happening? It worked great for everyday, but I think it has something to do with the NVIDIA driver update I downloaded. It is the main change I have made to the computer yesterday and now it seems to do. Does anyone have recommendations? How can I make my computer stop doing that? I have all the options of my black screen off for now, but that does not seem a good solution for this problem that he used to work properly.

  Hey,.

  Akuma is right, you should only use the display drivers provided by Toshiba and not nVidia. The nVidia drivers are not pre-tested and that's the reason why they can cause such problems. Also they don t have an overheating protection, installation happens on your own risk.

  If you need to test it with the drivers from the official website of Toshiba. Prior to installation, remove the current display driver, and then restart the computer. Then you can begin with the installation of Toshiba display drivers.

  In the worst case it of necessary to reinstall the whole system again, but before that, you try a system restore to an earlier point.

• Computer takes forever to stop + display does not properly

  Hello

  My computer began to take a long time to shut down (10-15 minutes) and then crashes with blue screen of death...

  Also when it comes on sometimes it loads but I have no display and my screen goes to power saving mode

  If I reboot, it takes forever to shutdown, then crashes, restarts, and the screen does not work until I'm physically hold the power button to turn off and then turn it on again, then the display works fine again. This only started happening in the last day or two, after I did a system restore.

  Any ideas what could be the problem?

  Thank you, Dan

  Hi Dan,.

  ·         You receive an error message or error on blue screen code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Please see the following articles for more information on the set of the computer:

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

   

  Demo: Smart ways to turn off your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-smart-ways-to-turn-off-your-computer

  You can also see the following article for more information on improving the quality of display:

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

  Let us know if that helps.

• EMF Tiff image conversion does not properly on Windows 7 PC

  I have a c# application that monitors the Clipboard.  When an EMF
  comes, I extract the EMF of the Clipboard data and try to
  Save offshore in a TIFF image. Everything works fine on a windows XP PC. However, when you do the conversion to grayscale, the converted image is not readable (blurry) on Window 7 PC (32-bit / 64-bit).

  I have using the standard GDI + for the conversion needs. What could be changed as the origin of the problem? Any help appreciated.

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Visual c# in the MSDN forums. Please post your question in the Visual c# MSDN forum.
   
  http://social.msdn.Microsoft.com/forums/en/category/visualcsharp
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]