Configuration and closing the new disk for Portege R100

Similar Questions

• Can I order the disk for Portege R400 XP downgrade

  Is it possible to order XP downgrade disk for Portege R400?

  Hello

  I doubt that this is possible.
  Your Portege R400 was delivered with preinstalled Vista. Am I wrong?

  Well, as far as I know there is only one image of Toshiba for this model of laptop and it s only a VISTA 32 bit ULTIMATE.

  But of course, you could install the Win XP clean using the MS Windows XP disc.
  There is just one small problem; Win XP drivers are not released for the Portege R400 model. I didn t find on the European driver Toshiba page.

  So, you have to collect the drivers with your own hands

  See you soon

• How to upgrade the operating system on the new ssd and make the old disk to a data drive system

  Hello

  I have a hp envy m7j010dx with windows 8.1.  It came pre-installed (windows 8) on a 1 TB hard drive.  I recently bought a samsung 840 pro 250 GB ssd that I wouold like to make the drive system and make the original drive my data disc.  confused on how to do it.  hey this is cool not clone. all I can find is stuff of backup or restore.  I just want to put the original on the new disk computer.

  Thanks for any info... soundears

  Start by creating a recovery kit. See the following link for the procedure:

  HP computers - create a recovery Disk Image or save an Image recovery on a USB (Windows 8)

  Learn how to create recovery DVDs or to save a recovery image on a USB flash drive to restore all the original software, in the case of a computer problem major.

  Remove the 1 TB of HARD drive pre-installation and install 250 GB SSD. Use the recovery kit and perform the recovery of the system. See the following link for the procedure:

  HP computers - running a HP System Recovery (Windows 8)

  HP System Recovery allows to reinstall or restore a HP with Windows 8 computer to the way it was at a previous time.

  Then you can connect the 1 TB HARD drive as a data disc and use it.

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• What is the maximum capacity of the disk for Portege M700?

  Does anyone know what is the maximum capacity of disk for Portege M700?

  Thanks for the reply

  As I m wrong not the Portege M700 does support a SATA HDD.
  In this case we must avoid any limitation of the size of the HARD disk
  Usually, you can use almost all SATA 2.5 hard drives in you M700.

• Disk GUID partition? and the new disk utility

  The new disk utility Version 15.0 delivered with El Capitan, differs from earlier versions of disk utility.

  Most will have noticed the absence of the utility to fix permissions.

  However, check the type of disc format is a little more difficult and well.

  The player must be selected, and then the information button must be selected.

  Then, you must look at the "File System" line to see whether or not it is OS X Extended.

  Then you look at the line "Logged" to see if it is 'yes' or a 'no '.

  How do we know if it's a GUID partition or a utility with the new APM partition?

  Sorry to contradict you, but general information about the disks are always where they used to be

  

• What can I do to remove the old email address and get a new one for my Microsoft account?

  Original title: problem with my phone

  What can I do to remove the old email address and get a new one for my Microsoft account

  What is the model of your phone?

  Normally you could not remove the default email but you can add a new account setting and if it is not the default, you could delete it in the account setting.

• Owner OF THE LICENSE No. [removed-kglad], PREVIOUSLY INSTALLED on OLD PC WHO CRASHED. HOW AND WHERE TO FIND THE NEW DOWNLOAD FOR THIS NEW PC. LICENSE FROM A USER OF MAY 2011.

  Owner OF THE LICENSE No. [removed-kglad], PREVIOUSLY INSTALLED on OLD PC WHO CRASHED. HOW AND WHERE TO FIND THE NEW DOWNLOAD FOR THIS NEW PC. LICENSE FROM A USER OF MAY 2011.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I open programms CS2 it will not work and gives me

  I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I opened any CS2 program it will not work and gives me the invalid key error. What should do?

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• I upgraded from CS3 to CS5 in December 2013. I have the original disks for CS3, but the upgrade was via a download. I need to reload windows on my PC and Photoshop. Can someone tell me how to download it again?

  Hello

  I upgraded from CS3 to CS5 in December 2013. I have the original disks for CS3, but the upgrade was via a download. I need to reload windows on my PC and Photoshop. Can someone tell me how to download it again?

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I shouldn't

  I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I wouldn't reinstall anything, right?

  Hi Greg,.

  You won't lose any application on the computer.

  You can remove a user from the license and assign it to another user according to the help below document:

  Using creative cloud | Manage your creative cloud to the membership of the teams

  Kind regards

  Sheena

• [CARS] Add the new disk in the database running environment

  Hi all

  I want to ask a question about oracle RAC especially to add a new disk.

  Here's the situation for existing oracle RAC

  1. There is 1 oracle clusterware (CRS), ASM and 2 node RAC

  2. There is a demand to add a new disk to existing diskgroup

  3. all CRS, ASM and RAC is in the online state

  I read document oracle (How to add a new disc to year Diskgroup existing RAC Cluster or stand-alone Configuration of ASM (Best Practices).) (Doc ID 557348.1()

  My question is,

  1. that I should stop the database, ASM and CRS when add a new disk to existing diskgroup?

  2. are there steps that has already been proven to add a new disk in an operational environment?

  Thank you

  Adrian

  My question is,

  1. that I should stop the database, ASM and CRS when add a new disk to existing diskgroup?

  No, you need not bring down the ASM or DB

  2. are there steps that has already been proven to add a new disk in an operational environment?

  Yes, you can add the disk, ASM automatically rebalance and share the workload on the new disk.

  http://docs.Oracle.com/CD/B28359_01/server.111/b31107/asmdiskgrps.htm#OSTMG10070

  There are number of blog posts about adding disks in a diskgroup

  MRMESSIN Oracle Database Administration: Add or remove disks from the ASM disk on the database group active

• Install ONLY Vision Demo Database and NOT the new installation?

  During the process of installing Oracle Applications R12 on Oracle Enterprise Linux.
  for the database layer, the installer provides an OPTION that allows you to
  ONLY install the (demonstration of Vision database) and NOT the (new installation)?
  
  If so, can you point me to some documentation on how this is achieved and that a
  estimate on how much disk space it would require?
  
  Thank you!

  Hello

  According to the manual 'quick install', page 2-9, it says:
  DIRECT QUOTE - "you can install a new database or a database of demonstration of Vision."
  From this quote, I guess that we can install the demo database, without having to install a database of fresh PROD.
  Don't you think that my assumption is correct?

  Your assumption is correct, but you should consider that quick install will also install the application part also in addition to the database.

  You can either install a fresh database (including the part of the application), but this database is clean (no data), and usually it is used for production after you make the necessary functional configuration OR a vision of the demo database (including the part of the application), and this instance is ready for use as functional configuration is already out in the database (used for demonstration purposes).

  If you are doing a new installation--> you'll need about 90 GB (55 for the database that is clean and 35 GB of application).
  If you do a vision--> you install will need approximately 260 GB (225 for the database which includes configuration data and 35 GB of application).

  Kind regards
  Hussein

• Time Machine the new disk transfer has not moved all the time

  I have a Time Machine backup to an external drive. It works very well. However, he was beginning to run out of space, so I bought a new, bigger HD.

  I followed all the steps of Time Machine: how to transfer backups from a current backup disk to a new backup drive - Apple Support.

  I then waited 12 hours for that copy.

  Around midnight, I noticed the copy is complete. There was a message that iWork had not been copied because he needed a different operating system. But I rejected. There are no other messages.

  I changed the Time Machine preferences on the new disk. And fell asleep.

  This morning, I walked into a Time Machine.

  Only the first date from July 2014, was on the new disc of TM. Then there was five times after midnight when the new drive was saved.

  But there is nothing in any of the years between the first date and after midnight.

  I know that there are hundreds of TM captures on the original disc. And I've used them very well.

  I tried to copy individual files from the old drive to TM to the new, but it is not possible to "change the backups."

  10.10.5 system

  What should do?

  While in Time Machine, to see all the volumes mounted shift - command - c.    Information derived from Linc Davis.

  If this does not work, try to copy the file to disk/restore utility using to copy the backup to a new location. Please note that this will reformat the destination partition.