X120e bad DIMM location. System does not return from standby mode

Similar Questions

• Tecra M5 does not return from sleep mode

  Sometimes my Tecra M5 won't wake up from sleep mode.
  The LCD does not turn, and hard drive works only for a second.
  I have for it to turn by pressing the power button / stop for a long time and then run again without my work that has not been saved.

  Other times I'm having problems with turning it off. Wondows disconnects and the PC is pending for a long time with LCD on - logging off XP screen.

  I have instaled videoprt.sys update and the latest BIOS 1.60

  Thanks for help.

  Hello

  I'm don't know if this will help, but try to install Microsoft Windows XP KB917332. You can find it on http://www.laptopvideo2go.com/drivers/ms_kbs/

  Please report the results!
  Good luck!

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A30: System busy after returning from standby

  My abrupt A30 Satellite developed a problem when returning from standby mode. The system busy "Hourglass" is constantly and will not die. I have reploaded the power management utility since all options in 'Properties of power Option' are grayed out except for the "Power Meter" tab. It did make a difference.

  This problem appears at the beginning?
  Maybe the operating system has been installed there several times and now the registry entries are corrupted.
  This is why the system busy hourglass may appear.

  I m not 100% sure that this will help, but maybe you need to reinstall the whole OS
  On the new OS installed should all work a lot faster

• x 220 does not resume from sleep mode

  A few questions posted here look identical, but I did find something similar.

  About 10% of the time, the machine does not sleep.  When you open the cover, the power led Nightlight INDIGLO®, caps lock light, LED, mic mute light and light through a Flash every seven seconds or more.  No messages appear on the screen.  By pressing the power button does nothing.  After a forced shutdown (power longpress button), and then pressing the power button a times, I gives me the message on windows does not shut down properly with the choice to start in safe mode.

  I'm not sure of the cause... I've updated everything that I can think of, but the problem persists (on an irregular basis).  The battery is too loose in the slot?  A jiggling of the batterery during sleep will cause an abnormal termination?

  Name of the operating system Microsoft Windows 7 Professional
  Version 6.1.7601 Service Pack 1 Build 7601
  INTEL CORE I5 - 2520M PROC SBB
  System model 4286CTO
  System Type x 64-based PC
  Processor Intel (r) Core i5 - 2520M 2.50 GHz, 2501 MHz, 2 Lossnay, 4 logical processors
  Version of the BIOS/Date LENOVO 8DET54WW (1.24), 18/10/2011
  SMBIOS Version 2.6

  This issue is NOT resolved.  I'll update the changes in the comments below.

  If there is a green box below this post that says 'resolved', please ignore.

  
  

• PC does not go on standby mode

  Hello

  I have a strange problem with my Pavilion (Vista 64 bit): it just won't go/stay in stand-by mode.

  Whenever I go through start panel into position mode it seems to go through the process of orders-by only're - wake up' the very next second pressing strongly it's fans and check the dvd player (no matter if there is a CD-ROM/dvd-rom in it or not).

  Same thing happens whenever I'm away from the PC long enough for him to enter standby mode automatically. He tries to stand by again after a certain period of time without ever stay in stand-by.

  I had the problem since I bought the PC a few months - but having already had to return to the first person that I bought right away I didn't go through the hazzle and take the second return - once again.

  Thank you very much in advance for your help!

  Sorry for the late reply.

  The question that you mentioned usually caused if the network adapter is set to wake the computer from sleep. If you are usign an always on Internet connection then there will be a constant activity in the network card and it wakes you up the PC as soon as you put in mode 'sleep'.

  Please, check the following and verify that the settings are correct.

  -Press the Windows logo and the R button to open the control box run.

  -Type devmgmt.msc, and then click OK.

  -It will open up the Device Manager.

  -Click on + sign next to network card and right click on the name of the adapter listed.

  -Select properties, then click the power management tab.

  -If the option "Allow this device to wake up the PC" is checked, uncheck the box that and click Ok.

  Try to put the PC to sleep/wake and check if it is in "standby mode".

  I would like to know if the procedure worked. Give Kudos if it works.

• Satellite Pro L10 does not go on standby mode

  After a virus and reinstall all my programs and drivers etc, my computer won't now, go in standby mode.
  When you go to "turn off computer" option ensures their but is grayed out and you can not click on it.
  Power options in my Control Panel on them is not an option to set the day before to the top.

  Can anyone help?

  Hello

  In my view, a Toshiba Power Saver must be preinstalled and there you should be able to enable or disable the standby or hibernation mode.

  Check it!

• Reference windows xp Dell does not wake from sleep mode

  I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Solve problems to wake the computer from sleep mode.

  http://support.Microsoft.com/kb/266283

• Hour system does not change from other time zones when autoamtically adjusted for DST

  I have the same problem. My House in time (UK) automatically adjusts for DST, but the other times around the world are not. I tried the fix above & it said it had found & solved the problem but nothing has changed.

  Suggestions more please?

  Hello Adrian Thurley.

  a. Click Start, type cmd in the search box, select command prompt, right click and run as administrator.

  b. at the command prompt, type:

  ' w32tm/Debug /disable' and press 'Enter' (net stop w32time gave an error 5 access denied response!)

  Type 'w32tm /unregister' and press 'Enter' (without using the first command, the second did not!)

  You should get the answer "W32Time successfully saved."

  c. Type "w32tm /register" and press "Enter."

  You should get the answer "W32Time successfully registered.

  d. type 'net start w32time' and press 'Enter '.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• C40 Cisco does not go on standby mode

  Hello

  I have a problem with a Cisco C40 where the codec simply is not going to go into sleep mode. I tried every possible thing to make it work, but without success. When I use Putty and you connect to it and sent the normal control: xcommand Eve turn on it goes to sleep. I also did a system reset, without success.

  When using the graphical interface and tell the system to go into mode after 1 minute, the system will remain forever.

  Anyone else having this problem, I have a second Cisco C40 who started doing this morning so I'm not sure what to do. I also noticed that the codec comes out of sleepmode the source presentation will change also to the main camera.

  Kind regards

  Cornelis Stoop

  The problem may be caused (in the screenshot eln_1.png) to have the Source of presentation to the source of the main camera.  This must be set on an other sources and not the main camera.

  Able to provide the whole xconfig one of the devices having the question rather than just two screenshots of the web interface, which do not show everything?

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• T500 does not wake from sleep mode

  My T500 (2241-3XU with Win 7 64 bit Ultimate) has never been able to wake mode 'sleep', once the lid is closed. I have finally returned to the use of hibernation, but I was just wondering if there is a new patch that I'm not aware of. I tried to find info a few years back before hibernation. Any ideas?

  Thank you.

  Dave

  Try to install the latest version on it. 1.62 should collaborate with the T500 however.

  You can also see if your BIOS is up to date.

• HP ProBook s 4540 - does not wake from sleep mode

  I tried a bit of everything that I could find on the Internet or what I know. Reduces the problem to the switchable graphics. Seams like WIndows cannot successfully choose what gpu. When I try to reactivate the screen is empty if the hdd led flashes and when the keys on the keyboard I can hear windows sounds. I have the latest drivers from Intel and AMD. All the updates of windows, all the drivers and software on the site need driver of HP. Double checked for the correct version, 64 bit etc etc. I tried to turn off windows hibernation, I tried to do hard reset, I tried almost all the power management, associate of hp of power, switchable graphics options including bios (I can only enable or disable graphic switchale) (for some reason I can't choose a fixed GPU?) I also checked for updates via the HP SUPPORT assistant. I tried save mode. I went through all the options of windows, I think. Tried the plans of different powers, ati catalyst (worst piece of sowtware never) options, etc. Nothing seams to work. I would appreciate any help from HP.

  I not unhooked old drivers with CCC (Control Panel-> Add) or remove programs-> AMD Catalyst Install Manager-> full delete after installation;

  My computer - right click - Properties-System - Device Manager - graphics card

  Amd Mobility Radeon HD 7500/7600 Series (Microsoft Corporation - WDDM 1.2) + yellow exclamation point

  Right click - Update driver and select new driver in the folder of the driver Amd (AMD C :-> AMD_Catalyst_13.6_Mobility_Beta-> packages-> drivers-> screen-> W86A_INF)...

  CCC not installed but it works great [cinebench 32fps] and solved problem of mode of sleeping

  If you are installing error cinebench or aida64-online

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx64\vcredist_x64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\VC12RTx86\vcredist_x86

  If windows experince index error "windows media encoding/decoding performance.

  (1) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder64

  (2) C:\AMD\AMD_Catalyst_13.6_Mobility_Beta\Packages\Apps\WMVDecoder

• Ssatellite U300 - 13K does not wake from sleep mode

  He has had this problem with windows vista and I decided to switch to Win7, but it still has the same problem.
  He falls asleep, but then don't wake up no matter what I click.

  Can you help fix?
  Thank you

  How set you the mode standby?
  The power LED flashes when the laptop is in sleep mode?

• Satellite L850-A635 does not wake from sleep mode

  purchase date: June 6, 2012

  When I put it in mode 'sleep', he goes to sleep, but when I start, it awakens me unless I have remove the battery, put in place and turn it back on.

  Please advise me how I can solve this problem

  Hello

  What happens if you press the power button / stop 4 sec long?

  Please run a HARD drive recovery procedure: (F8, fix my computer-> Toshiba HDD recovery)
  Don't install any software, but test the "sleep mode" immediately after that drive HARD recovery is completed.

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?