Configuration Error protection group

Similar Questions

• What is a Protection Group in fast food?

  What is a protection group? After the addition of an agent for the basic protection, why again, we need to configure a protection group and to add each volume in the protection group? Can we take backup of a single volume without adding it to the protection group.

  Hi akhilms:

  A protection group is a list of volumes that are backed up at the same time.

  For example, you have a server protected with C:, D: and E:. C: and D: are rather small and E: is really very important. It makes sense to backup C: and D: and E: separately set.  To do this, you enter different values in the planning for backup (for example, C: and D: E: every 2 hours and hours).

  The result is that two groups have been created in the background. Group 0 which includes C: and D:, and group 1 which includes E:

  In the graphical interface, you may notice a thicker line between the two.

  in the registry, if you access HKEY_LOCAL_MACHINE\SOFTWARE\AppRecovery\Core\Agents\\AgentProtectionConfiguration\ProtectionGroups

  you will notice that you have the associations for the protection of 0 and 1

• No VMs are displayed in the create a Protection Group Wizard

  Hello

  I want to test a recovery plan and I (hopefully) set up correctly.

  The two sites are connected and I set up the Mappngs, the records, the Placehoders and networks etc.

  I had a failure with a Protection Group who had no VMs in it.

  And that is the problem.

  When I go to create a Protection Group (with RSV) I don't see any virtual machines listed.

  My VMs are sitting on a Lun on the production side and this Lun is mapped to a logical unit on the recovering Site number.

  The LUNS are Openfilers

  Can someone tell me why I can't see the virtual machines or elsewhere the Lun?

  Is it because the logical unit number is Openfiler?

  This is my first time out of MRS so don't have a lot of experience with that.

  See attached PS

  Thank you very much

  Patsfan

  Have a look here for the installation of the replication of vSphere step by step and configuration with SRM: installation 5.1.1 SRM & amp; vSphere replication & #8211; Part 2 | VMFocus

• How do I trouble Configuration Error 16?

  Hi, so I have had a problem with Adobe Premiere Pro CC. whenever I run the application as a configuration error 16 appears. I am currently using a Windows 10 64-bit computer. I searched the Internet for a resolution, then I got to a part of the page that I did not understand. I am told to set permissions on both Adobe PCD and SLStore. I started working on SLStore first, I went to the Security tab and saw several groups or user names. I am shocked to see how they were, and I was confused about whether I need to change one or the other account. They all seem to relate to my administrator account. What should I do?

  Thank you

  Hannah

  See link below:

  https://forums.Adobe.com/message/7673815

• Groups in use (plan contains protection groups which are used by another stimulus plan which is to be runnning currently or in the State of full Test)

  Has anyone seen this error before?   vCenter has restarted during the test of srm, leaving the recovery plan in inconsistent state.  Don't show me an option for cleaning cleaning/force.  Here's the disclaimer that I see. (warning messages attached).

  under SRM 5.1.1 vCenter 5.1 U1c

  SRDF SRA 5.1.1

  Protection in use groups

  plan contains protection groups which are used by another stimulus plan which is to be runnning currently or in the full Test status.

  Corrected it.

  On the database for the site recovery made the changes below.

  (dbo.pdr_planproperties)

  Changed groupsInUse to readyReceiving

  On dbo.pdr_protectiongroup

  Change of State of 22 to 6

• 16 persistent Configuration error

  I recently migrated all my gear from one computer to another (including apps) and now I get the error Configuration 16. Permissions are all set to read and write and I uninstalled and reinstalled everything (including the creative Office Cloud) from the Adobe website, but I get the same notice to the opening of one of the applications EACH TIME.

  Anyone run into this?

  16 configuration error:

  @Lucyh

  Windows:

  
  

  Enable the display of hidden files and folders: [data program that will be hidden by default]
  

  
  

  N ° 1)

  ' Open the C: drive and locate the folder named 'the program data ". .

  Go to C: > Program Data > Adobe.

  Inside the Adobe folder, you can locate the folder SLStore.

  
  

  Right click on the folder SLStore, uncheck the read-only option.
  

  Then click on apply.

  

  Click the Security tab.

  Then click the Edit button.

  Permission set under window will be opened.

  Provide full control to all users.

  Then click OK

  

  Click the button change.

  Click on the user names listed in the section group name or the user.

  Then check the full control box under allow .

  

  Ensure total control of all user names:

  As SYSTEM administrator, your current saved in username, installers of confidence... etc.

  All must have full control.

  Then click on apply and then OK.

  If you get an error message when the application of the privileges, click ignore all option.

  
  

  
  

  
  

  Step 2)

  
  

  Same steps, but this time, we give all the permissions file to Adobe under C :> Program Files (x 86) > common files.

  
  

  Go to C: > Program (x 86) > common files.

  Under folder common files locate Adobe folder.

  Right-click on the Adobe folder, then select the properties option.

  Uncheck the read-only option and click on apply.

  If she invites error ignore everything.

  Click the Security tab.

  

  Click the button change.

  Click on the user names listed in the section group name or the user.

  Then check the full control box under allow .

  

  Ensure total control of all user names:

  As SYSTEM administrator, your current saved in username, installers of confidence... etc.

  All must have full control.

  Then click on apply and then OK.

  If you get an error message when the application of the privileges, click ignore all option.

  
  

  
  

  
  

  After providing full control access to the folder SLStore and Adobe.

  Launch the Adobe Premiere Pro application and check.

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  Try this below and see if it help you.

  http://support.Microsoft.com/kb/871122

• Windows XP Home Edition does not start: System Configuration Error Code purple?

  I ran recently on my Windows XP Home Edition SP3 computer system recovery and once the recovery is finished I rebooted the system and then this message and I'm stuck here.

  I don't have any disc that came with the computer because it was very long ago already. I tried to download the 'Home Edition Set Up disk for Floppy Boot Installation of Windows XP"Microsoft, but I can't launch the ff:

  Windows XP Home Edition
  Windows XP Home Edition SP1
  Windows XP Home Edition SP2

  I can't create the configuration of disk for home edition, SP1, and SP2 because this computer I use currently is a 64 bit and no floppy drive. That's why I downloaded this instead:

  Windows XP Service Pack 3 - file to Image CD ISO-9660

  From:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en

  I burned a DVD ROM, but I don't know what to do next. After burning, I reinserted the disc to your computer from the active autorun. Then I inserted the disc for my Windows XP that has "System Configuration Error" and I tried to restart it but theres just no autoplay or anything that the computer always crosses the "System Configuration Error" message and I don't know how to access the set up disc. What should I do? Help please... :(

  Hello

  Try the methods listed in the section below and check.
  How to resolve configuration errors by using the System Configuration utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Windows Media Center Configuration error

  Hello. I found people with this problem all over the internet but I have yet to get a final solution.

  My PC is running Vista Home Premium with Media Center the greats. It is connected to my wireless network.

  My Xbox is connected to the network directly, as he's sitting right next to her.

  My PC detects the Xbox in 'Network' and it appears as an Extender when I run the Media Center application. My Xbox gives me the 8 digit code and I put it. I said I want to share media, and it then goes to the configuration bit extender. Then it says Configuration error.

  I have enabled Media Player via my firewall, open all the necessary local ports and don't have any other firewalls up. I don't know what is happening.

  I'd like to get this up and running, so any help is welcome.

  EDIT: Just realized this placed entirely in the wrong place. Please move it, mod?

  Hi free-kill.

  Thanks for choosing the Windows vista Forums.

  I suggest that you go through the link below that says

  1. how to set up a Windows Media Center Extender device

  http://windowshelp.Microsoft.com/Windows/en-us/help/8076aff3-16ec-4751-9F57-d36e0ff407201033.mspx#EPD

  2. how to solve problems with a Windows Media Center Extender device

  http://windowshelp.Microsoft.com/Windows/en-us/help/e217efbf-8A5D-4681-af74-c01e1b648b641033.mspx

  I also suggest that you visit the following link to get the best answers to the question since it is linked to the Xbox:

  http://forums.Xbox.com/

  Best regards, |
  Marnie.

• Windows vista side by side - configuration errors

  Agree with others, I need clear instructions step by step to solve this problem.

  I started having side by side configuration errors trying to open Chrome.  It then spread to Quicken.  Then Norton.  I took my laptop to a computer store to fix.   It has been cleaned and "fixed."  But tonight just trying to open a PDF file, I'm back for another side by side configuration error.  When does this stop?  How can I get rid of this error for good?

  Help, please!

  Have you chk these links?

  How to fix the side by side configuration error?

  Error message: side-by-side Configuration is incorrect

• DMA2200 not will impact configuration and reports a configuration error

  I used the DMA2200 successfully until recently when he lost contact with my Windows 7 PC. The PC can see the DMA2200 on the network, but after 8-digit code, I always get a configuration error and a new user (Mcx1). I use AVG 9.0.819. This does not have a firewall, so I use the built in Windows 7 firewall. This deactivation makes no difference. My PC has been upgraded to Vista successfully little after that Windows 7 is out. I used the DMA2200 since then OK but maybe never implemented since the upgrade of the operating system. I checked for DMA2200 updated firmware, but it signals that I am up to date. My connection is an administrator. I keep everything where I can.

  The Windows logs I get (see below).

  Can anyone help here please?

  Kind regards

  VIC

  Journal entries: -.

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 30/05/2010 14:00:58
  Event ID: 545
  Task category: Configuration
  Level: error
  Keywords:
  User: Lojoka\Vic
  Computer: Lojoka
  Description:
  Media Center Extender Setup cannot create an account for the extender with ID: uuid:8D91C7B0 - 99FD-42 D 1-A1A5-79AE293B37ED.

  Error: Only a part of a query ReadProcessMemory or WriteProcessMemory was made.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      545
      0
      2
      4
      0
      0 x 8000000000000000
     
      6591
     
     
      Media Center
      Lojoka
     
   
   
      UUID:8D91C7B0 - 99FD-42 D 1-A1A5-79AE293B37ED
      -2147024597
   
  

  Log name: Application
  Source: Microsoft-Windows-user profiles Service
  Date: 30/05/2010 14:00:57
  Event ID: 1533
  Task category: no
  Level: error
  Keywords:
  User: Lojoka\Vic
  Computer: Lojoka
  Description:
  Windows cannot remove the profile directory C:\Users\Mcx1-LOJOKA.Lojoka.005. This error can be caused by files in this directory that is used by another program.

  DETAIL - the directory is not empty.

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1533
      0
      2
      0
      0
      0 x 8000000000000000
     
      79970
     
     
      Application
      Lojoka
     
   
   
      C:\Users\Mcx1-LOJOKA.Lojoka.005
      The directory is not empty.
  
   
  

  Log name: Application
  Source: Microsoft-Windows-user profiles Service
  Date: 30/05/2010 14:00:57
  Event ID: 1511
  Task category: no
  Level: error
  Keywords:
  User: S-1-5-21-2753804710-3089563717-4261566473-1045
  Computer: Lojoka
  Description:
  Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1511
      0
      2
      0
      0
      0 x 8000000000000000
     
      79971
     
     
      Application
      Lojoka
     
   
   
   
  

  Solved! The problem was a software the Bank invites you to install. It's report. It has never given any other issue. I've uninstalled it during my investigations and the Extender (DMA2200) has finally set up OK. After you have reinstalled the report still seems to work OK.

  I hope this helps someone!

  VIC

• Configuration error

  I've upgraded to a card mother Gigabyte and processor Intel i5 on my HP Pavilion p6320f pc, (the old card mother Pegatron - came out) but I can not get my pc has started, and it keeps giving me the message "a configuration error has been detected." I checked and re-checked BIOS settings nothing works. Am I missing something? Help, please.

  Here are the specifications of the HP Pavilion p6320f desktop. Since you have replaced the motherboard with one that is different from the original, your operating system and the HP recovery discs no longer works.

  Please descirbe your better/more detail question. Is this error in the BIOS? Is it in Windows?

• Configuration error up to Xbox 360 as extension of media including Windows 7 PC multimedia

  Running Windows 7 x 32.

  Until the recent XBox 360 update, everything worked fine using 360 as a media Center Extender.

  Now fails and when I try to resestablish a connection, a configuration error arises.

  Network connection looks very good I can still media playback fine on the Xbox interface.  Media Center seems to find and install the extension OK, just fails during Setup.

  Have tried with AV and fiewalls disabled (Karspersky) without success.

  Frustrating that was working fine, now the functionaility is lost.

  Any help would be greatly appreciated

  For months, I met a problem exactly as described here, but I finally fixed it on my machine and I think that I learned at the base of it.

  The fix (this is for Windows 7, can also apply to Vista):

  1. find your file 'Users' (usually c:\users).

  2. under "Users" folder, navigate to the subdirectory "Default\AppData\Local\Microsoft\Windows Live".
  Note: The directory does not exist, but I saw the problem of the Extender only on a computer that has it.

  3 inside of that directory, there are additional subdirectories (e.g. "Bob" and "SqmApi"). Inside, there are several files with the extension .sqm. THE PROBLEM IS WITH. SQM FILE PERMISSIONS. Specifically, the profile service has access permissions or to copy files when you create a new profile.

  4. to solve the problem of authorization, perform the following actions on each of the SQM files.
  Note: Inherit permissions from the parent container will grant all access to read files.

  a. right click on the file, select Properties.
  b. Select the Security tab, click the Advanced button
  c. Select the permissions (default) tab, click on change permissions...
  d. MARK THE BOX: include permissions can be inherited from the parent of this object.
  e press the OK button several times to close all dialog boxes.

  Then, the Media Center Extender installation program as per regular instructions.

  While these steps managed to fix my computer, they may not apply to all situations. My advice is to run the following diagnosis:

  1. use the control panel to create a new user account.

  2. use "Switch user" (or Log off/Log) in an attempt to connect to this new account. This attempt will fail (if not, you may have a different problem).

  3 look at the log of the events of 'Application' (under "Windows logs") for the relevant events.

  On my machine, I received several warnings with 1509 event Id on files that could not be copied from Users\Default to Users\TEMP due to access denied errors. There were files .sqm with incorrect permissions.

  If you like this solution, you will also love our service http://docs.com ;-) The solution presented here can be found in documenthttp://docs.com/AF1P.

• No there is no way to turn off or disable the Configuration of Protection in IE11, Win 7? Or enable Java?

  No there is no way to turn off or disable the Configuration of Protection in IE11, Win 7?  Or enable Java with IE on?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  Internet Explorer enhanced security configuration allows you to adjust the security levels for the existing security zones in Internet Explorer. It helps to reduce exposure to possible future security threats.

  Note: Turning off this feature can make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this task but are providing this information so that you can implement this workaround at your own discretion solution. This feature is at your own risk.

  Greater compatibility of add-on from Protected Mode

  Follow this article for help to enable Java.

  How to enable JavaScript in a web browser?

  Hope this information is useful. Thanks for posting for further assistance, we'll be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni