Groups in use (plan contains protection groups which are used by another stimulus plan which is to be runnning currently or in the State of full Test)

Similar Questions

• Chkdsk cannot run because the volume is in use by another process

  My computer was working fine until last night. Now when I connect I get a blue screen saying that the computer shuts down to prevent further damage from happening. I tried to restore to an earlier point in time when my computer was working but then I get the error:

  The OS disk (C :) has errors.
  Windows has detected corruption on OS (C :) file system. You should check the drive for errors before you can restore it.

  So I'm going to run the chkdsk utility, and I get the error:
  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts.

  I'm confused because the chkdsk unility usually works, and I have no idea why she is being used by another process. I am clearly not very good with computers. I tend to do a lot of spywear and adwear on my computer. I have Spyware Doctor that removes any infection.

  Help, please. I've tried everything. Thank you.

  Asha22,
  It appears from your last post why chkdsk did not run on reboot and you gave an incorrect message is that you did not a space between the volume and the f number.  The correct syntax is:

  CHKDSK c: /f

  You can also run the utility disc in this way:
  http://windowshelp.Microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79C7-0f91-9337c2c41f811033.mspx

  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  The reason that it says that the disk is in use by another process is because it is in use by the operating system (Vista), and that's why it must be run at startup, before the operating system loads fully.

  Another utility, you need to perform is the System File Checker, if you can get your computer to start, either normally or in Mode without failure.
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Let us know what these tests are and how we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can we replace Oracle form when you used by another user

  Hi Experts,

  Is it possible to replace Oracle form while in use by another user?

  Some time need deliver urgent fixes on the production environment, but it must wait for downtime, and the form does not use.

  I searched the Forum, but able to get the answer to this topic, I will be grateful if you could provide no alternative to do this.

  Env:

  Windows Server 2008 R2

  WebLogic Server 10.3.5

  Oracle form & report 11.1.2

  Hello

  For Production environment, it will be handled with tactics that led to minor maintenance work as well.

  You must have two physical directories (real and temporary) including the same fmx/plx/pll/mmx, files etc.

  and a file reference of in the FORMS_PATH in default.env, who have the latest version of the source.

  Copy the last source file into a temporary directory, when the user take the new session, it will access the new version of the source of the temporary path and who obviously last source version.

  Meanwhile, once the actual source published by the user version, you can copy the latest version of the source to the real directory and reset the FORMS_PATH with the actual path.

  In this way, you can solve your problem.

• How to make a simple slideshow DVD of a group of .jpg images?  No music, no fancy transition. iDVD > magic DVD comes close, but the quality is poor and I want the images in a specific order.  I also have iLIFE ' 09, which includes iPHOTO

  How to make a simple slideshow DVD of a group of .jpg images?  No music, no fancy transition. iDVD > magic DVD comes close, but the quality is poor and I want the images in a specific order.  I also have iLIFE ' 09, which includes iPHOTO

  1. put the image files you want in the slide show in an album and genre as you want. Follow the Apple document to prepare images for iDVD: iDVD ' 09 (7.x): preparing images for iDVD slideshows

  2 - Launch iDVD and select an older theme, not animated.  You can change the background of the theme by dragging the image file of your choice, black or other, in the display pane for the menu.

  3 - Click on the button '+' and add a slideshow from the menu.

  

  4. double click on the sideshow button to enter the mode of construction of the slide show.

  5. in the media pane click the Photos button.

  6 - click on iPhoto and find the album you created with selected images.

  

  7. Select all images in the album and drag to the left in the slide show window.

  8 - Select the transition for the slideshow and the time for each slide on screen

  9 - follow this workflow to help ensure the best DVD video qualty:

  Once the project you want it save it as an image disk via the menu file → save as Disk Image . It will separate from the process of encoding of the burning process.

  To check coding mount the disk image, launch a DVD player and read it.  If it plays OK with DVD, encoding is good.

  Burn burn to disc with utility disk or toasts to the slowest speed (2 x - 4 x) in order to ensure the best quality.  Always use higher quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are recommended in these forums.

  

• Is it possible to import a layer group into a project to another project?

  Hi all

  I am currently using after effects 5... Yes it is version 5, not CS5.

  I'm trying to figure out if I can import a layer group and their applied effects in another project while keeping all the editable attributes and positions of the imported layers with respect to one another.

  I see that I can import an ASP project file into another project through the FILE to be IMPORTED, but just, which brings the raw project window files/layers and don't place no layers in the timeline with all their positions, the effects and the edited attributes, how I had like.

  Also tried to previously compose the layer, but who did not leave their editable once a demo was made... just makes the 7 layers I want to import in to another project all one layer and not let them be changed the way the 7 layers are separately.

  In Adobe Premiere, there is a real ' IMPORT the PROJECT ' selection under IMPORT that allows me to import an entire project in another project and allows me to place the imported project where I want in the new project editing... that's what I try to do in After Effects.

  I realize that there may be a way easy to make it in one of its latest versions of After Effects and the other may say, 'just buy the new AE CS5', but I figured out allot of things on my own so far and I love after effects 5 for what I do now... maybe later on the newer version.

  Thank you for any input,

  Digi

  Just import the source project in the new project.  Open the original composition, select the layers you want and copy.  Then, open the new composition and paste.

  If you want to be really ordered on this subject, you can make a temporary version of the source project that contains only the layers you want to move to the new project.  Import this temp project to the new, then you can delete the temp project.

• Windows Xp not connecting to another computer on the Working Group, but individually can connect another computer

  Windows Xp node fails to connect to another computer on the Working Group, but individually can connect another computer.

  I checked the file & sharing options of printer being checked on the general tab.

  Hello

  1. did you of recent changes on your system prior to this problem?
  2. where you able to connect to other computers through the front working group?
  3. do you get an error message?

  I suggest you try the procedure described in the below mentioned link and check if it helps.

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP:
  http://support.Microsoft.com/kb/318030

  Hope this information is useful.

• Creates groups of area for forms

  How create/configure groups of fields in Eloqua?

  

  OK, so I just talked to my first support representative on this matter. They don't (and claim that they have never) so that you create or modify your own (though too vaguely, I remember seeing a kind of functionality, but can not say for sure).

  He spoke to the management of products and I guess that the main purpose was to use them as models for the 'grouping' Visual feature (notice how they have a column 2 or 3).  Once you drag the Group of form fields in the form region, you can then modify the field names, types of fields, labels, validation, etc.

  I just watched the (removed from Topliners, I save the whole) release for the 13 winter and of course page 8 notes, he describes this.

  

• Error ERR - 10768 current Application ID and security group ID are not the measures

  Dear all,
  
  I had the default below code in my login page and it was running fine.
  
  (wwv_flow_custom_auth_std). Login
  P_UNAME = >: P101_USERNAME,.
  P_PASSWORD = >: P101_PASSWORD,.
  P_SESSION_ID = > v ('APP_SESSION').
  P_FLOW_PAGE = >: APP_ID | » : 1'
  );
  
  Then I replaced the code above with the code below, and now he's in error "error ERR - 10768 Application ID and current security group ID are not constant".
  I can't understand what is wrong with the code. Please correct me where I am wrong.
  
  declare
  vpage_no number 4;
  Start
  
  If: P101_USERNAME = "DEMO" then
  vpage_no: = 2;
  on the other
  vpage_no: = 1;
  end if;
  
  (wwv_flow_custom_auth_std). Login
  P_UNAME = >: P101_USERNAME,.
  P_PASSWORD = >: P101_PASSWORD,.
  P_SESSION_ID = > v ('APP_SESSION').
  P_FLOW_PAGE = >: APP_ID | vpage_no
  );
  end;

  Yousuf,

  You did not follow the convention used in the original, try:

  P_FLOW_PAGE =>: APP_ID |': ' | vpage_no
  );

  Scott

• When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled

  When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled. message also indicates that there are errors.  How can I me then chkdsk to run

  Hello

  See if these two tutorials to help you with this.

  "How to run the check disk at startup in Vista or Windows 7"

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  "How to difficulty Chkdsk will not run at startup in Vista"

  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  See you soon.

• Hello, my computer down and I bought another. How can I install Adobe Acrobat XI pro on the new computer with my license? In fact, it's already used with my old computer which is broken...?

  Hello, my computer down and I bought another. How can I install Adobe Acrobat XI pro on the new computer with my license? In fact, it's already used with my old computer which is broken...? !

  you are allowed to two facilities/activations.  If you want / need to restore those, contact adobe support and application and activation count reset.

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I follow the plan. But he still need me to buy the app. It shows that the trial has expired. And then I had to buy. He asked to sign and said: I have subscription to use.

  I follow the plan. But he still need me to buy the app. It shows that the trial has expired. And then I had to buy. He asked to sign and said: I have subscription to use.

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• I want to use InDesign, but for this month only! so if I pay for the "monthly plan" means that I pay for this month then the plan InDesign will end?

  I want to use InDesign, but for this month only! so if I pay for the "monthly plan" means that I pay for this month then the plan InDesign will end?

  Hello

  Please go through the Adobe - General conditions of subscription as well.

  Alternatively, you can contact customer service

  Hope that helps!

  Kind regards

  Sheena

• I am trying to decide if I want to register at the price of 9.99 a month plan. Will I get LR6 and I have the choice of using PSE?

  I'm trying to decide if I want to register fo RL CC 9.99 a month plan. Will I get LR6 and I have the choice to use PSE?

  Cloud creative photography subscription only includes Photoshop and Lightroom.

  Photoshop Elements that you will need to buy as individual application that comes with the serial number.

  Please check the link for more details below:

  Lightroom and Photoshop | Plan of cloud of Adobe's creative photography

• Which product should I so that I have the ability to add my signature, but they have to be protected by password so that only I can sign?

  Which product should I so that I have the ability to add my signature, but they have to be protected by password so that only I can sign?

  You can create a profile of digital signature in the drive, and it is protected by default.

• Have 13 items onPC and he was also on an old laptop which is now destroyed - when trying to install the new laptop receiving message - serial number already in use by maximum permitted computers - HELP

  13 things on PC and he was also on an old laptop which is now destroyed - when trying to install the new laptop receiving message - serial number already in use by maximum permitted computers - HELP

  You will need to contact Adobe directly. Work your way through this document. Try to open a chat session.

  Contact the customer service