configuration file is missing

Similar Questions

• need urgent help: configuration file of missing dg, dg hung

  I had an incident which dg on db primary configuration files are all gone.
  
  DGMGRL show configuration appear below:
  
  DGMGRL > see Configuring
  
  Configuration - dev
  
  Protection mode: MaxPerformance
  Databases:
  dev - primary database
  sdev - (*) Physical standby database
  
  Fast-Start Failover: ENABLED
  
  The configuration status:
  ORA-16610: activate ' CONFIGURATION ' underway
  DGM-17017: unable to determine the configuration state
  
  
  Then, if I try to disable/remove the configuration, it HUNG.
  
  How to solve this problem?

  Try the command like this:

  activate the "sdev" database

  Show you without the quotes.

  Best regards

  mseberg

• How to fix error "configuration file is missing uninstall software" (windows 7 64-bit), which program?

  How can I correct this msg, uninstall this program

  Try Safe Mode and clean boot procedure.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It is a free utility that is very convenient to use for troubleshooting.

  Autoruns for Windows v11.3
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

• I downloaded Adobe CS5.5 Master Suite: configuration file missing

  I don't know what to do. My school has published free number (legally) CS5.5 Adobe master collection. I downloaded all via my Adobe Downloader, but now he says that the configuration file is missing. What can I do?

  It seems that the package might be corrupted regular you get the missing file error.

  Consider re - download the package.

  You can download from direct download links available at: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

  But make sure you follow the steps mentioned on the page before you start the download.

• Windows Boot Configuration data file is missing required information

  Hello

  I am trying to boot up my laptop and the Windows Boot Manager appears saying that Windows could not start.

  File: \boot\bcd

  Status 0xc000000d

  Info: The windows boot configuration data file is missing required information.

  I have a laptop Dell Inspiron notebook, which came with Windows 7 pre-installed so I didn't have an installation disc, nor do I have a CD player.  How can I solve this problem and is it simple?  I tried to turn on my new laptop and pressing F8 but nothing happens and the windows Boot Manager appears again.  Can someone help me please, or I'll have to return someone to solve this problem for me?

  Thank you

  Michael

  For questions of Windows7 you should repost in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.  It is a Forum of Vista so I wasn't expecting a question of Windows7.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The boot configuration data file is missing some required information, error code: 0xc000000d

  Original title: question of recovery of Windows 8

  I have a Toshiba laptop with windows 8.  and this morning when I tried to turn it on, it's the message that is displayed:

   

  "RECOVERY".

  your PC needs to be repaired

  The boot configuration data file is missing some required information

   

  File \BCD

  Error code: 0xc000000d

  
  you will need to use the tools of recovery on your installation media. "If you, etc.".

   

  There is no USB or CV came with the laptop.  It is automatically installed when I first turned on.

   

  I was looking at a trip to this topic last night and everything was perfect, now, this morning, I get this message.

   

  I restarted the computer a few things, but this message is still there.

   

  My question is how can I get my laptop to work again, because I can't go in the computer to change the settings or options.

   

  Help, please

   

  Thank you

  Winnie

  Hello

  We are here to help.

  You can perform the troubleshooting steps below:

  Option 1: Windows startup parameters in the Windows recovery environment .

  • Windows recovery environment, enter in safe mode. After you have successfully loaded in safe mode, perform the clean boot.

  Option 2: restore your PC to an earlier point in time .

  1. Enter in the right edge of the screen and then click on Search.
  2. Enter the Control Panel in the search box, and then tap or click Control Panel.
  3. Enter the collection in the control panel search box, and then tap or click recovery.
  4. Press or click open system restore, and then follow the instructions.

  Let us know how it goes.
  

• The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034.

  I just bought my ASUS laptop (with no dvd player) 3 days ago. Today I turned on for the first time and was usually up to 1 hour later this bluescreen poped out: RECOVERY, your PC needs to be repaired. The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034. You will need to use the tools for restore on your installation media. If you don't have any media of the instalation (such as a disc or USB device), contact your system administrator or the PC manufacturer... As I said before that my laptop came with Windows 8, and it is not a dvd player.

  Thank you.

  Remove the power supply and remove the battery

  Press and hold the power button for 60 seconds

  Apply the AC voltage ONLY (DO NOT INSTALL THE BATTERY)

  Click on the power button and more quickly, press F9

  Follow the instructions to reset the computer to factory default

• Windows 8 will not mistake The Boot Configuration Data file is missing some required information.

  Yesterday, I downloaded Windows 8, and although using it was confusing I got the hang of it. Today, I used the computer again and everything was fine but then I stopped him and a few hours later, when I turned it on a blue screen appeared and he says:

  Recovery
  Your PC needs to be repaired
  The Boot Configuration data file is missing some information required.
  Leader: \Boot\0xc000000d
  OT: After victory. Download 8 it won't launch
  I have no idea what is happening or how to fix it. Any help to help me understand and solve this problem would be appreciated.

  Met the same question from one day to the other - re install Win 8< week="" old="" decided="" to="" misbehave="" on="" a="" reboot.="" nothing="" untoward="">

  In any case discovered that the automatic startup repair is less useless for me. He could not fix anything whatsoever after the diagnosis and just gave up.

  However, resort to repair (start your windows installation CD) command line prompt, I managed to solve it with the command of the ffg on the command line.

  Bootrec /rebuildbcd

  More info about bootrec available using your favorite search engine.

  for example, this site was useful for me

  http://superuser.com/questions/451277/missing-boot-files-in-Windows-8

  For users in previous posts with problems and have only a version downloaded to Win 8 - well I'd say that you yourself create a DVD of the version uploaded to win 8 - the installation program ask you if you want to create media - that will create a 4.x GB. ISO file that you can burn to DVD. There is enough information on how to do this just search online.

  With regard to creating a way to initiate Win8 installer from USB Eh well I heard the ffg tool works with Win 8 too but cannot vouch for her since have never tried so its at your own risk.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool?ClickID=ckqs4fqifskwfnxlpiwkzwxqwwwzlvvlezzk

  Good luck, have fun,

  See you soon

• pre-defined types of missing data when using a configuration file

  Hi all

  I recently installed Labview signal express 2011, including the audio wizard and vibrations. I got a file preset to implement the material I have but when I open the configuration file (a Labview project file) I get a message:

  Version of installed components are not compatible with the version of LabView express signal 2012. Please install the latest version of the following:

  "SV express datatypes.

  I do not have Labview signal express 2012 so I do not understand why this error pops up. I also have difficulties in locating the mentioned software

  Please notify

  Hi Yogev_sharvit,

  There is not a way to save the files to a previous version of the Sound and Vibration Assistant. I encourage you to contact SAGE, who was the source of the files, and whether they have a 2011 version available. Otherwise, it may be necessary to configure the steps in the wizard. I've included a screenshot of the file opened below. Unfortunately, this does not bring as much light on the different steps that we would.

• The Configuration files of start missing error 0 xc 0000034

  Hello

  I turned on my computer today and said she had a lack of Boot Configuration file. I proceed to online solutions and tried each of them.

  Solution 1:

  Auto repair diagnosed the problem and tried to fix it but do nothing.

  Solution 2:

  Command line method returns the statement "the device system requested is not found" when the implementation

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  What gives the guest of installation add to the startup list? Yes/No/all

  Solution 3:

  By using bcdboot c:\Windows command prompt

  I could not yet resolve the startup problem.

  I can't do the cooling system or restore, because the drive is locked. What can I do else?

  Thank you all in advance for your solution.

  I got my computer to start again, but the only difference was that I used the online software after you download it to a USB port. Then repeat the solutions from above.

  Solution 1: This time, there was a newspaper where the repair was not successful.

  Solution 2: When I ran it it says 0 installations there.

  At that point, I decided to reset the computer and see if it boots. He did.

  The original software CD was not at all helpful.

• SQLNET.ora Network Configuration file "missing parameters".

  Hello gurus;
  
  Earlier I create sqlnet, ora by NETCA
  My SQLNET.ora contains following information only...
  
  
  sqlnet.ora # Network Configuration file: /u01/app/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
  # Generated by Oracle configuration tools.
  
  NAMES. DIRECTORY_PATH = (TNSNAMES)
  
  
  * > > Help > > *.
  why he did not show all parameters? Here is something wrong?
  I need to set SQLNET. AUTHENTICATION_SERVICES = NONE

  952909 wrote:
  Hi EdStevens

  Not able to connect to the database without entering a user name and password.

  Yes, we know. You said, in almost all positions, you did on this subject. We got that. Believe me, we understand that. Can we move on to solve your problem?

  [oracle@localhost ~] $ sqlplus /.

  SQL * more: Release 10.2.0.1.0 - Production on sat 22 dec 19:12:30 2012
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  ERROR:
  ORA-01017: name of user and password invalid. connection refused

  Because everything counts OS logged as that doesn't have an account AUTHENTIFIE of BONES in the database.

  but I can connect like this,

  [oracle@localhost ~] $ sqlplus

  SQL * more: Release 10.2.0.1.0 - Production on sat 22 dec 19:12:17 2012
  Copyright (c) 1982, 2005, Oracle. All rights reserved.

  Enter the user name: ops Sham $
  Enter the password:
  Connected to:

  Because, despite the "ops$"... ops$ feint isn't an authenticated OS account. This is a database of authenticated account. It's only a database of authenticated account because you gave it a password. From your previous post to Justin:

  -quote from the previous post to start-

  SQL > CREATE USER ops$ sham IDENTIFIED EXTERNALLY.
  Created by the user.
  -suspend - quote

  OK, at this point, you have an authenticated os account "$ops Sham".

  -quote to continue-
  SQL > GRANT CONNECT TO the Sham ops$;
  Grant succeeded.
  -suspend - quote

  Now, the operating system account 'sham' should be able to connect with a simple "sqlplus / '.

  -quote to continue-
  SQL > grant dba to simulacrum of ops$;
  Grant succeeded.
  -suspend - quote

  Now, anyone who uses the operating system account 'sham' can connect without a password and have all the privileges listed in the role of "dba".

  -quote to continue-
  SQL > alter the simulacrum of $ ops user identified by shamos.
  Modified user.
  -end quote-

  But now change you your account "$ops Sham" and gave it a password. OPS$ feint is therefore more than a bone authenticated account. It is now a database authenticate the account, but with a rather misleading name. At this point, if you are trying to connect as "sham of the ops$", you will need to provide a password.

  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options

  Note: most web links either saying, we can choose to connect with DB.
  I want to know the difference why this sqlplus command / error display

  Because you're tying to use authentication with an operating system account that is not an operating system os authenticated account in the database. Put "ops$" on the name of the account is NOT what makes an authenticated os account. What makes authenticated os sets the account as "identified on the outside. If you create as 'identified by somepassword', OR if you CHANGE to 'identified by somepassword' then it is NOT authenticated os.

• Missing database configuration file

  Hello
  
  When I am trying to build an application using Maxl Script, I get the following message
  
  Lack the database configuration file [< Path > \Db.cfg], ask disabled logging.
  
  Implied by this message and how to fix this?

  It's normal if you do not query record set in place. You can ignore the message (unless you try to configure the logging of queries!).

• Equium A60: An error of Windows startup. «.. . file is missing or corrupt... »

  Hello
  I wonder if anyone can help me, whenever I turn on my laptop, that an error message appears and I can't access windows, I tried to figure out what to do, but have had no luck
  That's what the message reads:

  Windows could not start because the following file is missing or corrupt:
  \WINDOWS\SYSTEM32\CONFIG\SYSTEM
  You can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
  Select 'r' in the first screen to start repair.

  To be honest I'm not sure CD is the original installation CD-Rom that I need to fix the system would the included recovery CD or a CD diffferent?
  If someone could help me shed some light on the situation, I would be very grateful

  Thank you.

  Hi Binta,

  The repair option is available from the recovery console, which is located on the installation of Microsoft XP CD. However, I think your laptop was an OEM installation in which case you should have the Toshiba Recovery CD instead. They lack the recovery console and it would therefore be necessary to restore the whole system of Toshiba drives.

  This will actually format your HARD drive and then re-install the system as it was during the first delivery the laptop. Unfortunately, this will replace any of your data unless you have it in another partition on your drive HARD or on some other backup media.

  The recovery CD will allow your to re - install the entire system or partition the HARD drive first, so that you can keep your data separate from the operating system.

  The recovery process can be started by pressing the 'C' key when starting the laptop. After the restart you will need to re - install any additional software that you might have, and you will also need to download updates that are available on the website of Microsift update.

  HTH

• Destinations of Windows file is missing or damaged

  I have problems to install updates on my laptop. I have discovered that the destination Windows file is missing or damaged. Someone knows how to solve?
  I use Windows Vista Home Premium. Microsoft, despite their best efforts, could not sort it out.

  Repairs available for download? Any help is appreciated.

  You can try to access the advanced boot option by pressing the F8 key immediately after laptops were turning on/off.
  Then you could try using the option called last known good configuration.

• Qosmio G30-161 does not start - NTDLR "file is missing

  Hi all

  I have a G30-161 double HDD (in Raid 1) which no longer starts...
  He just gives the message "file NTDLR is missing" and is followed by a prompt to restart the computer in which the same error will appear again.

  I got this laptop for my son to fix (lucky me :(!)

  Things, I've looked at so far:

  -Check the BIOS to see if the disks are configured properly - BIOS indicates the two hard drives installed, online and in RAID 1
  -J' had an installation of Windows XP by hand disc then tried to see if it would boot from a CD. He started on the CD ok, but the process Windows Recovery Console/install said he couldn't find any hard drives. Find an Acronis True Image boot disk (using linux I think), once again the started program end, but don't have it no hard drives installed.
  - So with no HD not reports I took one for a test. With disk 2 removed, in an attempt to start the system reports "RAID 1 is GRADIENT" then follows with "NTDLR file is missing. So this tells me that SW RAID working probably and he knows that a HD has been removed.
  All the patches I've read on the PC forums involve the use of the XP Recovery CD or some, but it won't work because the system thinks there are no disc when it starts. We have no ' have a Toshiba Recovery disk for the machine.

  Someone at - he saw the problem above, knows a fix?
  Can I purchase a G30-161 recovery CD anywhere?

  Any help appreciated. ...

  Thank you
  Steve

  Hello

  Looks like your drive is loked I found a thread in forum about the same error message and the user mikeptag posted a solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=58&ThreadId=24051

  I didn't test this procedure and, therefore, I don't know m if it can help you or not, but in my opinion it's worth to try

  Check this box and post your results

  Good bye