Missing database configuration file

Similar Questions

• "Cannot find the dbcodes file": PeopleSoft database Configuration Wizard

  Hello

  I am setting up a new installation of PeopleSoft, based on a copy of the record of my client PS_HOME. I installed before PeopleSoft, but I used the latest versions and started from scratch. Now I use PS HRMS 8.9 and PT 8.48 on a Windows 2003 server. I followed the manual to install 8.48 PT (installation of third party tools, using configuration manager), except for the wizard to install PT, because the files are already there. I changed all config files I had to include suitable locations for PS_HOME, Oracle database drivers, etc.

  Now, I'm trying to use the database Configuration Wizard to automate the creation of the database using Oracle 10.1.0.5.0. After you have selected a non-unicode database, I click Next, select the character set, and then when I click Next again once I get the message "Cannot find the dbcodes file."

  I checked in the folder PS_HOME/setup and there are two dbcodes files: dbcodes.pt and dbcodes.hc. It is originally a kind of confusion, or the wizard missing the dbcodes file somewhere else? Or maybe that's another question altogether, I'm not sure.

  Thanks for the help.

  To start with PS_APP_HOME introduced in PeopleTools 8.52.

  On the road to Peoplesoft: Peopletools 8.52: the PS_APP_HOME variable

  As you run on PeopleTools 8.48, the application is installed in the PS_HOME.

  ptengs. DB is used to create a single database of PeopleTools, you try to create a database of HCM. This file will not be used when creating your database.

  If you want to create your copy of HCM all files from 'PS_APP_HOME' to PS_HOME database and start Data Mover with option to create database.

  Should do the trick.

• configuration file is missing

  Hello
  
  Configuration file is missing at the applications level.
  So I want to recreate this file, could you please suggest me how can I do this?
  
  Thank you

  You just need to turn on the layer applications only. Since no changes have been made on the database layer, running the automatic configuration service is not necessary.

• SQLNET.ora Network Configuration file "missing parameters".

  Hello gurus;
  
  Earlier I create sqlnet, ora by NETCA
  My SQLNET.ora contains following information only...
  
  
  sqlnet.ora # Network Configuration file: /u01/app/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
  # Generated by Oracle configuration tools.
  
  NAMES. DIRECTORY_PATH = (TNSNAMES)
  
  
  * > > Help > > *.
  why he did not show all parameters? Here is something wrong?
  I need to set SQLNET. AUTHENTICATION_SERVICES = NONE

  952909 wrote:
  Hi EdStevens

  Not able to connect to the database without entering a user name and password.

  Yes, we know. You said, in almost all positions, you did on this subject. We got that. Believe me, we understand that. Can we move on to solve your problem?

  [oracle@localhost ~] $ sqlplus /.

  SQL * more: Release 10.2.0.1.0 - Production on sat 22 dec 19:12:30 2012
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  ERROR:
  ORA-01017: name of user and password invalid. connection refused

  Because everything counts OS logged as that doesn't have an account AUTHENTIFIE of BONES in the database.

  but I can connect like this,

  [oracle@localhost ~] $ sqlplus

  SQL * more: Release 10.2.0.1.0 - Production on sat 22 dec 19:12:17 2012
  Copyright (c) 1982, 2005, Oracle. All rights reserved.

  Enter the user name: ops Sham $
  Enter the password:
  Connected to:

  Because, despite the "ops$"... ops$ feint isn't an authenticated OS account. This is a database of authenticated account. It's only a database of authenticated account because you gave it a password. From your previous post to Justin:

  -quote from the previous post to start-

  SQL > CREATE USER ops$ sham IDENTIFIED EXTERNALLY.
  Created by the user.
  -suspend - quote

  OK, at this point, you have an authenticated os account "$ops Sham".

  -quote to continue-
  SQL > GRANT CONNECT TO the Sham ops$;
  Grant succeeded.
  -suspend - quote

  Now, the operating system account 'sham' should be able to connect with a simple "sqlplus / '.

  -quote to continue-
  SQL > grant dba to simulacrum of ops$;
  Grant succeeded.
  -suspend - quote

  Now, anyone who uses the operating system account 'sham' can connect without a password and have all the privileges listed in the role of "dba".

  -quote to continue-
  SQL > alter the simulacrum of $ ops user identified by shamos.
  Modified user.
  -end quote-

  But now change you your account "$ops Sham" and gave it a password. OPS$ feint is therefore more than a bone authenticated account. It is now a database authenticate the account, but with a rather misleading name. At this point, if you are trying to connect as "sham of the ops$", you will need to provide a password.

  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options

  Note: most web links either saying, we can choose to connect with DB.
  I want to know the difference why this sqlplus command / error display

  Because you're tying to use authentication with an operating system account that is not an operating system os authenticated account in the database. Put "ops$" on the name of the account is NOT what makes an authenticated os account. What makes authenticated os sets the account as "identified on the outside. If you create as 'identified by somepassword', OR if you CHANGE to 'identified by somepassword' then it is NOT authenticated os.

• need urgent help: configuration file of missing dg, dg hung

  I had an incident which dg on db primary configuration files are all gone.
  
  DGMGRL show configuration appear below:
  
  DGMGRL > see Configuring
  
  Configuration - dev
  
  Protection mode: MaxPerformance
  Databases:
  dev - primary database
  sdev - (*) Physical standby database
  
  Fast-Start Failover: ENABLED
  
  The configuration status:
  ORA-16610: activate ' CONFIGURATION ' underway
  DGM-17017: unable to determine the configuration state
  
  
  Then, if I try to disable/remove the configuration, it HUNG.
  
  How to solve this problem?

  Try the command like this:

  activate the "sdev" database

  Show you without the quotes.

  Best regards

  mseberg

• I downloaded Adobe CS5.5 Master Suite: configuration file missing

  I don't know what to do. My school has published free number (legally) CS5.5 Adobe master collection. I downloaded all via my Adobe Downloader, but now he says that the configuration file is missing. What can I do?

  It seems that the package might be corrupted regular you get the missing file error.

  Consider re - download the package.

  You can download from direct download links available at: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

  But make sure you follow the steps mentioned on the page before you start the download.

• pre-defined types of missing data when using a configuration file

  Hi all

  I recently installed Labview signal express 2011, including the audio wizard and vibrations. I got a file preset to implement the material I have but when I open the configuration file (a Labview project file) I get a message:

  Version of installed components are not compatible with the version of LabView express signal 2012. Please install the latest version of the following:

  "SV express datatypes.

  I do not have Labview signal express 2012 so I do not understand why this error pops up. I also have difficulties in locating the mentioned software

  Please notify

  Hi Yogev_sharvit,

  There is not a way to save the files to a previous version of the Sound and Vibration Assistant. I encourage you to contact SAGE, who was the source of the files, and whether they have a 2011 version available. Otherwise, it may be necessary to configure the steps in the wizard. I've included a screenshot of the file opened below. Unfortunately, this does not bring as much light on the different steps that we would.

• The Configuration files of start missing error 0 xc 0000034

  Hello

  I turned on my computer today and said she had a lack of Boot Configuration file. I proceed to online solutions and tried each of them.

  Solution 1:

  Auto repair diagnosed the problem and tried to fix it but do nothing.

  Solution 2:

  Command line method returns the statement "the device system requested is not found" when the implementation

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  What gives the guest of installation add to the startup list? Yes/No/all

  Solution 3:

  By using bcdboot c:\Windows command prompt

  I could not yet resolve the startup problem.

  I can't do the cooling system or restore, because the drive is locked. What can I do else?

  Thank you all in advance for your solution.

  I got my computer to start again, but the only difference was that I used the online software after you download it to a USB port. Then repeat the solutions from above.

  Solution 1: This time, there was a newspaper where the repair was not successful.

  Solution 2: When I ran it it says 0 installations there.

  At that point, I decided to reset the computer and see if it boots. He did.

  The original software CD was not at all helpful.

• Database Configuration utility - huray? :-/

  Hello (again, sigh).
  
  I want to install PeopleSoft FCM 9.1 and Yes, having no experience with the installation of PeopleSoft I decided to use the database Configuration utility, using the article provided by Nicolas Gasparotto as a guide:
  http://Gasparotto.blogspot.com/2009/12/DB-Wizard-850-for-Oracle-on-Linux.html
  as well as the Oracle Documentation. In the guide above, I should be up to step 9.
  
  This is the log that I get after failing to create the database:

  SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 15:39:29 2010
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> spool createdb.log
  SQL> 
  SQL> startup nomount pfile=$ORACLE_HOME/dbs/initFC91DB.ora
  ORA-48108: invalid value given for the diagnostic_dest init.ora parameter
  ORA-48140: the specified ADR Base directory does not exist [/u01/app/oracle/product/11.2.0/dbhome_1/dbs/<ORACLE_BASE>]
  ORA-48187: specified directory does not exist
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 1
  SQL> 
  SQL> create database   FC91DB
    2        maxdatafiles  1021
    3        maxinstances  1
    4        maxlogfiles   8
    5        maxlogmembers 4
    6        CHARACTER SET UTF8
    7        NATIONAL CHARACTER SET UTF8
    8  DATAFILE '/oradata/FC91DB/system01.dbf' SIZE 2000M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    9  EXTENT MANAGEMENT LOCAL
   10  SYSAUX DATAFILE '/oradata/FC91DB/sysaux01.dbf' SIZE 120M REUSE AUTOEXTEND ON NEXT     10240K MAXSIZE UNLIMITED
   11  DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE '/oradata/FC91DB/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT     640K MAXSIZE UNLIMITED
   12  UNDO TABLESPACE "PSUNDOTS" DATAFILE '/oradata/FC91DB/psundots01.dbf' SIZE 300M REUSE AUTOEXTEND ON NEXT  5120K MAXSIZE UNLIMITED
   13  LOGFILE GROUP 1 ('/oradata/FC91DB/redo01.log') SIZE 100M,
   14            GROUP 2 ('/oradata/FC91DB/redo02.log') SIZE 100M,
   15            GROUP 3 ('/oradata/FC91DB/redo03.log') SIZE 100M;
  create database   FC91DB
  *
  ERROR at line 1:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session ID: 0 Serial number: 0
  
  
  SQL> spool off
  SQL> exit
  Disconnected

  OK so Oracle is not available, but:

  [oracle@vm-psfin91-db InstData]$ sqlplus SYS/system@SEED as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 15:46:49 2010
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL>

  The SEED is just a small database I created earlier to test connectivity between my servers - just a little crutch for me to see at least some progress. But it shows that Oralce is available, is it not?
  This who can I check/recheck?
  
  Looks like I'm starting to be a regular here on the forums boast help :D
  
  Thank you in front of me,
  Honza.

  These scripts are coming within the installation of the Application (HCM in your case) under $PS_HOME/scripts/unix, it seems that you missed this step and installed only Peopletools.

  Nicolas.

• That means "missing product Configuration"?

  I downloaded firefox. I did the 'RUN' of the set-up file. It will not be implemented. I get "Missing product Configuration". I am running Windows 7.1.

  Try this:

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/
  • Start the installation by double-clicking on the desktop icon

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test in the case where a security software comes in.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Disabling update the configuration file without stopping the VI

  I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

  I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

  I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

  Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

  Thank you very much.

  There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  

• IOS XR. When absolute refpoint is created in the primary persistent configuration file?

  Hi all

  Can someone help me understand during the creation of the absolute refpoint and what determines that a certain place in the persistent configuration file becomes an absolute refpoint?

  The foundations of the IOS XR States that 'an absolute refpoint is the configuration of the router at any given time. Engage
  "refpoints are the files of different validation that are created for each commit. But at what point? I would like to know that in the case for example to do a restore to find out where my absolute point (namely the IOS will be restored when starting) vary his place in the persistent config or not?

  Thank you!

  Hello vadym,.

  feels to me that it is a little more complex way to explain the validation database in this book.

  every time a commit is done, the configuration of this set is stored as an id validation (or label if provided). This gives then a check point in time which allows you to return to for example.

  the validation database can contain 100 changes.

  the complete configuration is always available at sysdb. (the database system).

  Cheers!

  Xander

• change the value of the location attribute in db jca file with the configuration file

  Hello

  How can I change the value of attribute of 'place' in the jca adapter db file by using the configuration level if possible?

  I have the database map file where the first two lines are:

  < name of the adapter-config = "getParty" = 'Database adapter' adapter wsdlLocation = "getParty.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/CRP1"UIConnectionName ="crp1_apps"adapterRef =" "/ >

  ...

  I need to replace the configuration file

  EIS/DB/CRP1

  with

  EIS/DB/DEV

  but this isn't the case. I think that I am not referencing correctly but I don't know how he is correct, that I couldn't find examples for composites and wsdl content, JCA file.

  Please share the idea.

  Thank you

  Anatoliy

  Anatolly salvation,

  You can assign a new value to the property of JCA by using either the Ombudsman as BPEL.

  Pick click entitled value option and add the right attribute to the property JCA jca.db.DataSourceName.

  In BPEL will zoom click the invoke for the DB adapter, go to the Properties tab and add the right attribute to the property JCA jca.db.DataSourceName.

  (edit)

  If you want to use a configuration file to set the value, I suggest a BPEL property, the value can be replaced by using a configuration file and can be assigned to the JCA property using ora: getPreference ("prefName as string");

  When you use a mediator does not have a preference, and you can use a placeholder that you change when you compile the SCA composite. With ANT in combination with hudson, you can easily replace the value (hard) by the environment.

  See you soon,.

  Robert van Molken

  Specialist of the integration of Oracle

  Post edited by: robertvm

• After the migration to the new Mac Pro Dreamweaver will not launch, said missing menus.xml file. How to solve this?

  After migrating to a new Mac Pro Dreamweaver CS6 launch. It is said that missing menus.xml file. How to solve this?

  Hi rustyg12,

  Go to/Applications/Adobe Dreamweaver CS6/Configuration/Menus/menus.bak

  You will see a menus.xml file here - it is a backup copy of the actual menus.xml file that uses DW.

  Copy it from this folder, paste 1 level above (in the file menu).

  Launch DW. See if it works.

• OATS Database Configuration tool not found

  Hey guys,.
  
  I wanted to just start the 'OATS Database Configuration tool', but I can't find it in "start > all programs > Oracle Application Testing Suite.
  I did a full install of OATS Version 9.31.0036.
  
  Someone at - it an idea?
  
  Best regards
  Dewi

  I'll try to check first if the dbConfiguration jar file exists on the server, and second, to get the absolute path to the pot in the command line.

  C:\Programme\Oracle\OracleApplicationTestingSuite\jdk\jre\bin\javaw.exe-Djava.library.path=C:\Programme\Oracle\OracleApplicationTestingSuite\oats\lib - cp C:\Programme\Oracle\OracleApplicationTestingSuite\wls\wlserver\server\lib\weblogic.jar; C:\Programme\Oracle\OracleApplicationTestingSuite\wls\wlserver\common\lib\pdev.jar;wlfullclient.jar-jar C:\Programme\Oracle\OracleApplicationTestingSuite\\lib\DBConfiguration.jar

  JB