Similar Questions

• Can someone tell me where are the configuration files managed by the CRS resources?

  Hello

  I'm new to SIR and I am curious about certain topics, CRS.

  Could someone explain me where I find the configuration of the resources held by the CRS?  These resources I see later with the crs_stat command?

  I know how stat them (crs_stat) I know how to handle (for ex: crs_relocate) but I guess there is also configuration files that store settings for example which define nodes (target) where run them etc..

  Thank you.

  m.

  As FreddieEssex said, this info is in the OCR. It's a binary file, not a traditional text-based configuration file.

  Normally, you use crsctl or srvctl utility to change the configuration of the resource.

  You can also use the utility GRID_HOME/bin/ocrdump $ to clear the content of OCR in a file > but even in this case, some of the information is still in form binary (a lot of hexadecimal characters).

  HTH,

  Brian

• Break the Configuration file.

  How to set up and or configure file sever in windows server 2008r2?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• The configuration files are used to create this cache server?

  I start a cache server by running the $COHERENCE_HOME/bin/cache-server.sh file. But I don't how it is configured.
  The configuration files are used to create this cache server? How do I know?
  I check the contents of the cache-.sh file.
  In my view, the config.xml file - cache-coherence, consistency-pof - config.xml file and leader tangosol-coherence are used, no?

  After the start of a cache server, view the output carefully and you will find the configuration files are used. For example, the configuration files are displayed in bold background in the following text:

  F:\coherence\coherence\bin>cache-server.cmd
  java version "1.6.0_16"
  Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
  Java HotSpot(TM) Server VM (build 14.2-b01, mixed mode)
  
  2009-11-30 22:46:06.468/1.547 Oracle Coherence 3.5/459  (thread=main, member=n/a): Loaded oper
  ational configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *tangosol-co*
  *herence.xml"*
  2009-11-30 22:46:06.484/1.563 Oracle Coherence 3.5/459  (thread=main, member=n/a): Loaded oper
  ational overrides from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *tangosol-cohere*
  *nce-override-dev.xml"*
  2009-11-30 22:46:06.500/1.579 Oracle Coherence 3.5/459  (thread=main, member=n/a): Optional conf
  iguration override "/tangosol-coherence-override.xml" is not specified
  2009-11-30 22:46:06.500/1.579 Oracle Coherence 3.5/459  (thread=main, member=n/a): Optional conf
  iguration override "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5/459
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  2009-11-30 22:46:07.468/2.547 Oracle Coherence GE 3.5/459  (thread=main, member=n/a): Loaded c
  ache configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *coherence-cach*
  *e-config.xml"*
  2009-11-30 22:46:08.515/3.594 Oracle Coherence GE 3.5/459  (thread=Cluster, member=n/a): Service
   Cluster joined the cluster with senior service member n/a
  2009-11-30 22:46:11.765/6.844 Oracle Coherence GE 3.5/459  (thread=Cluster, member=n/a): Creat
  ed a new cluster "cluster:0xD7DB" with Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.1
  68.0.8:8088, MachineId=26632, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceSe
  rver, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) UID=0xC0A800080000012548585
  C6D68081F98
  2009-11-30 22:46:11.796/6.875 Oracle Coherence GE 3.5/459  (thread=Invocation:Management, member
  =1): Service Management joined the cluster with senior service member 1
  2009-11-30 22:46:12.515/7.594 Oracle Coherence GE 3.5/459  (thread=DistributedCache, member=1):
  Service DistributedCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.593/7.672 Oracle Coherence GE 3.5/459  (thread=ReplicatedCache, member=1): S
  ervice ReplicatedCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.609/7.688 Oracle Coherence GE 3.5/459  (thread=OptimisticCache, member=1): S
  ervice OptimisticCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.625/7.704 Oracle Coherence GE 3.5/459  (thread=Invocation:InvocationService,
   member=1): Service InvocationService joined the cluster with senior service member 1
  2009-11-30 22:46:12.625/7.704 Oracle Coherence GE 3.5/459  (thread=main, member=1): Started De
  faultCacheServer...
  
  SafeCluster: Name=cluster:0xD7DB
  
  Group{Address=224.3.5.0, Port=35459, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=266
  32, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
    OldestMember=Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=2
  6632, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
    ActualMemberSet=MemberSet(Size=1, BitSetCount=2
      Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=26632, Locat
  ion=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
      )
    RecycleMillis=120000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  Services
    (
    TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.0.8:8088}, Connections=[]}
    ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMembe
  rId=1}
    InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
    DistributedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCo
  unt=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
    ReplicatedCache{Name=ReplicatedCache, State=(SERVICE_STARTED), Id=3, Version=3.0, OldestMemberId=1
  }
    Optimistic{Name=OptimisticCache, State=(SERVICE_STARTED), Id=4, Version=3.0, OldestMemberId=1}
    InvocationService{Name=InvocationService, State=(SERVICE_STARTED), Id=5, Version=3.1, OldestMember
  Id=1}
    )
  

• setenv OTF file Configure Tomcat environment settings to serve as an integrator

  In Installation guide under installing Integrator Tomcat server its cities that we need create a setenv file and configure the settings memory Tomcat adapted to our needs.
  
  I created a setevn.sh file that has under content:
  
  Export JAVA_OPTS = "- server - Xmx512m".
  
  I got the content above of glasses.
  
  It will be great if someone can explain to me what is this file and which specifies the content of this file.
  
  Thank you very much.
  
  Kind regards
  Amrit

  The option - Xmx defines the maximum memory size of the Java heap for the Tomcat process running Integrator Server. If you look below you, you should increase this value higher than 512 m (.5 GB) in order to run integrator in Server mode graphics. The Setup Guide for the Integrator Server recommend a minimum of 1 G (1024 m) but, if you have more memory, you should be put higher:

  http://docs.Oracle.com/CD/E35976_01/General.240/eid_install/TOC.htm#Tomcat%20configuration%20recommendations

  If your size is too small, Tomcat (which hosts the Integrator server) will run out of memory during the processing of your data.

  HTH,

  Patrick Rafferty
  http://branchbird.com

• We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, its error message that gives as no network device connected. Suggest me!

  Original title: problem in installing FSRM

  We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, open the FSRM in "All programs", its error message that gives as no network device connected.  Suggest me!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Files Management tab does not appear in the import module. I think that I have configured some settings but am unable to change. I restored the factory default preferences, removed and reinstalled on Macbook, but they are always there for example allow du

  I am new to Lightroom and I followed a guide that allowed me to set import preferences. Now I want to change them, and although I see them in the import dialog box small I don't see a "File management" tab at any time. I have reset factory default in the preferences and removed and re-installed on my Macbook, but they are still there.

  Any advice would be much appreciated as I'm looking for guides and forums but did not find any specific help. Thank you.

  Click on apply when importing

  You see file handling

  If so just select

  

  Hope this helps

  Assani

• External configuration files to WebLogic Server 10.3.4

  Hey,.
  
  I have a question. I have external configuration files, and I don't know where to place them, or better how to add the path where configuration files located on servers WebLogic classpath?
  
  I worked with JBOSS and here I've added a few lines in the startup script. In glassfish here I can do through the administration gui.
  
  The files are *.cfg files and the error output is the following:
  
  PATH_INSTANCIA:
  log4j:error could not read the configuration file [nullCONFIG.cfg].
  java.io.FileNotFoundException: nullCONFIG.cfg (no such file or directory)
  
  
  Thanks in advance :)

  Hi Jack,

  You must add the folder where the configuration file is present in the classpath for WLS. Change the CLASSPATH in setDomainEnv.cmd/setDomainEnv.sh (make a backup of these files :) - just in case) to include the path of the config file.

  Restart the server and WLS should be able to choose the file.

  In your code, you can have the line as follows

  Thread.currentThread () .getContextClassLoader () .getResource ("filename")

  As you have already added the file to the classpath, it will be able to get the reference to the file.

  Thank you
  Patrick

• Cannot save error of configuration file on an instance of customer of Smartview

  I have a user who has the following error message is displayed every time that they switch from one tab to another within a file: "unable to save the Configuration file. Please contact your system administrator. »
  
  Any help will be greatly appreciated.
  
  Thank you
  
  Scott Smith

  But I don't know, I'm going to venture a guess. There's a properties.xml file stored in the Hyperion\smartview\cfg directory on their machine (or the drive shared depending on how Smartview has been installed) is that their machine is so locked or read only directory so they cannot update the file? Remember that this is only a guess

• webutil read file function finds the file on the application server

  Hello

  I want to select and read a file (possibly .pdf) and save it to the database.

  To achieve this, I:

  1) created a table, deltia (key primary aa, varchar2, blob, other columns... image_blob, filename)

  (2) created a block form of database based on the deltia table. The element of the "image_blob" column type is image

  and the image format is "tiff".

  (3) wrote the following piece of code to perform the selection of local file (successfully)

  Select the FUNCTION (i_FileFiltre IN Varchar2 default vDefFileExt)

  RETURN VARCHAR2

  IS

  vPath Varchar2 (128);

  vFileName Varchar2 (256);

  vFileFiltre Varchar2 (200): = i_FileFiltre;

  Begin

  vPath: = CLIENT_WIN_API_ENVIRONMENT. Get_Temp_Directory;

  vFileName: = WEBUTIL_FILE. FILE_OPEN_DIALOG

  (

  vPath,

  '',

  vFileFiltre,

  "Select the file to download.

  ) ;

  Return vFileName;

  END selection;

  The form above function call is:

  Declare

  vFileName Varchar2 (200);

  Begin

  vFileName: = PKG_File_Ops.Selection;

  If vFileName is not null then

  : eq_deltia_metakinhshs. Filename: = vFileName;

  End if;

  End;

  (4) wrote the piece of code to the game/place the file selected in the form element "image_blob", as following:

  client_image.read_image_file (: eq_deltia_metakinhshs.filename,)

  substr (: eq_deltia_metakinhshs.filename, instr (: eq_deltia_metakinhshs.filename,-1)).

  "eq_deltia_metakinhshs.deltio_image");

  The call to the packaged procedure client_image.read_image_file does not work. It returns error

  "47109 - cannot locate the/u01/oracle/temp /... image file"

  In other words, the system will search to read the selected file locally on the server App.

  What can be the cause of this?

  With regard to the content of the webutil.cfg of the App Server. :

  # ---------------------------------------------------------------------------

  # webutil.cfg - WebUtil default configuration file

  # ---------------------------------------------------------------------------

  # This file contains all the configuration settings for webutil. These are some

  # divided according to the following sections:

  # 1. Logging options

  # 2. Installation options

  # 3. Upload a file and download Options

  # 1. Logging options side server for recording the log messages and errors

  # You must set logging.enabled to true to allow registration of mid-range. Without this

  logging of mid-range # will not be any PL/SQL or URL options

  # are provided to turn it on. Once recording is activated the other settings are

  # in-game.

  #

  # Details

  # -------

  # logging.file: sets the file name and location of the log file.

  # Note that WebUtil does no management of the log file. You can

  # need to manually clean this file at any time.

  # logging.enabled: can be TRUE or FALSE

  # logging.errorsonly: can be TRUE or FALSE. Parameter True will ensure that

  # only errors and the normal information log messages

  # are written to the log file. It would be for the use of the product,

  # normally be set to TRUE

  # logging.connections: can be TRUE or FALSE. Setting to true causes each

  connection from a client using WebUtil for write in #.

  # the log that it puts in place.

  Logging.file =

  Logging.Enabled = False

  Logging.ErrorsOnly = false

  Logging.Connections = false

  # 2. Installation options

  # WebUtil needs to download files on the client to perform

  # some operations such as OLE integration or access to the registry. These files

  # are downloaded on the client when webutil is run for the first time.

  # Subsequent executions will use the dll in the cache. Define the location of the

  # These files on the server and the location on the client.

  #

  # Here's a chart that shows numeric constants and their meanings. They

  # are used in configurations of installation options. These constants are defined

  # in WEBUTIL_CORE package spec. Note that the Processor Architecture of the Client operating system

  # is generally the architecture of the JAVA virtual machine that runs on the client,

  # not necessarily even the real client architecture of BONE.

  #

  # < Os - > Client OS family < arch - > processor for the Client operating system Architecture

  # 0-0 - 32-bit Windows

  # 1 Linux 1-64-bit architecture

  # 2 SOLARIS

  # 3 HP

  # 4 AIX

  # 5 mac

  # 9 unknown

  #

  # < Package > - package name

  # 7 WEBUTIL_OLE2

  # 9 WEBUTIL_C_API

  # We do not yet have downloads for other packages. If you need, refer

  # Spec package WEBUTIL_CORE for constants of other packages

  #

  # Details

  # -------

  # NOTE: For all < arch > parameters field is optional. Without this field, the

  # setting will apply to the client 32-bit and 64-bit OS (FMV)

  architectures of #.

  #

  # install.syslib.location. < os >. < arch >:

  # The virtual path of the directory containing the webutil library files the

  server-side of #. This must be an absolute URL or a relative URL

  # for the documentbase.

  # NOTE: < os > field is optional for this parameter. In the absence of a framework

  # which has the client OS and ARCH, it will use

  # install.syslib.location. < arch > cannot be specified if < os > is omitted.

  #

  # install.syslib.location.client. < os >. < arch >:

  # The path to the directory on the client machine where the webutil library

  # files will be downloaded. This must be an absolute path or a path

  # which is the profile of the client user or at HOME. Directory will be created

  # If necessary as well as other parent directories. If the path is

  # do not set, it will be treated as a special case where the libraries will be

  # downloaded to the client JRE\bin (windows) or JRE/lib (unix). If this

  # Directory is changed, all libraries will be redownloaded again.

  #

  # Please keep in mind that other forms server may also have a similar

  the location of # and so libraries could be overwritten even when

  # client running webutil server of different forms. It is therefore

  # advised that the location has a subdirectory that may be unique to your

  # Server, such as the name of the host server. You could use $(SERVERHOST) in the

  # location. This string will be replaced with the actual hostname of the server

  #

  # install.syslib. < os >. < arch >. < package >. < n >:

  # The names of the libraries required for the particular webutil beans. The

  # format of it's name. size | version | showDownloadDialog. Several libraries

  # can be downloaded per package. But make sure the values < n >

  # row and start at 1 for a given operating system, arch and package together.

  install.syslib.Location=/webutil

  install.syslib.Location.0.0=/webutil/Win32

  install.syslib.Location.0.1=/webutil/Win64

  # Add/Edit the following if you want to specify a different location client

  # where syslib libraries.

  # Format:

  # install.syslib.location.client. < os >. < arch > = < location >

  \win32 install.syslib.Location.client.0.0=webutil\syslib\$ (SERVERHOST)

  \win64 install.syslib.Location.client.0.1=webutil\syslib\$ (SERVERHOST)

  # Change the size and the version if necessary, such as when the upgrade of the library.

  # Normally this is not necessary since most of these libraries are equipped

  # settle. Jacob does not however come with installation

  # Format:

  # install.syslib. < os >. < arch >. < package >. < n > = name | size | version | showDownloadDialog

  1.14.3 - install.syslib.0.0.7.1 = Jacob - x 86 DLL | 102400 | 1.14.3 | true

  1.14.3 - install.syslib.0.1.7.1 = Jacob - x 64 .dll | 117760 | 1.14.3 | true

  install.syslib.0.0.9.1 = JNIsharedstubs.dll | 45056 | 1.0: true

  install.syslib.0.1.9.1 = JNIsharedstubs.dll | 58368 | 1.0: true

  install.syslib.0.0.9.2 = d2kwut60.dll | 81920 | 1.0: true

  install.syslib.0.1.9.2 = d2kwut60.dll | 102400 | 1.0: true

  # You can also add your own libraries here, for example

  #install.syslib.0.0.user.1 = testwebutil.dll | 204872 | 1.0: true

  #install.syslib.0.0.user.1 = ffisamp.dll | 40960 | 1.0: true

  #install.syslib.0.1.user.1 = ffisamp.dll | 35328 | 1.0: true

  # 3. Download / upload options

  # For file upload and download options, you can set the default locations

  # on the server that webutil can use as a work space. Optionally, you can pass

  off # upload and download

  #

  # Details

  # -------

  # transfer.database.enabled: can be TRUE or FALSE - allows you to activate or

  # disable upload and download of data

  #                                server.

  # transfer.appsrv.enabled: can be TRUE or FALSE - allows you to activate or

  # disable the upload and download from the

  application server #.

  # transfer.appsrv.workAreaRoot: the root of the location in which can WebUtil

  # store temporary files uploaded by the client.

  # If no location is specified, application server

  # user_home/temp will be assumed.

  # This place is always readable and accessible writable

  # No matter the parameters of

  # transfer.appsrv. * are. This parameter is

  # If you need side customer

  # READ/WRITE_IMAGE_FILE procedures.

  # transfer.appsrv.accessControl:Can be TRUE or FALSE - allows you to specify

  # that loads and downloads can occur

  # the directories named in the

  # transfer.appsrv.read.n and

  entries transfer.appsrv.write.n # and their

  subdirectories #. If this parameter is set to FALSE,

  # transfers can happen anywhere.

  # transfer.appsrv.read. < n >: list of directory names that downloads can read

  #                                from.

  # transfer.appsrv.write. < n >: list of directory names that mail can write

  #                                to.

  #NOTE: by default, the file transfer is disabled by security measure

  Transfer.Database.Enabled = True

  Transfer.appsrv.Enabled = True

  transfer.appsrv.workAreaRoot =

  transfer.appsrv.accessControl = FALSE

  #List transfer.appsrv.read. < n > directories

  Transfer.appsrv.Read.1=c:\temp

  #List transfer.appsrv.write. < n > directories

  Transfer.appsrv.Write.1=c:\temp

  # 4. Others

  # Details

  # -------

  # BlockAllowHeartBeat: Continue the heart beat communication with the

  # Server when set to TRUE. By default, the value is

  # the value False. If set to False, there is no heart

  # fight mode blocking communication.

  BlockAllowHeartBeat = False

  Notes:

  The database version is 11g v.2

  Forms services version is 11g v.2

  The webutil has been installed and configured (I have done a project that requires reading a

  saved locally excel file - using webutil_ole2.)

  I didn't notice an error in the Java console.

  Thank you

  SIM

  This error indicates that your server is a unix platform: 47109-cannot locate image file/u01/oracle/temp /

  
  

  If it is correct, then your webutil.cfg is not been set correctly.  Entries for transfer.appsrv are in reference to the appsrv and not the client.  So you currently C:\temp which is a directory of Windows and not Unix.

  (2) Transfer.appsrv.Read.1 =c:\temp. It is already set.
  

  3) Transfer.appsrv.Write.1=c:\temp. It is already set.

• Configuration file

  Guys, I need to take your brain if you don't mind.

  We have an application that connects to a specific server. Information on the server is configurable, but the user must do so within the application. The team wants to deploy the OTA application without having to ask the user to change the server or without having to configure themselves. My question is, you know in a way that we can make the configurable information so it changes when the user to install the application? Something similar to an .ini file that contains the information from the server and is installed with the application. Computer SCIENCE team will not have access to the code where they cannot recompile the application with the new server information. The ".ini" file would be the best option because the team would just need to change but I don't know if this is possible.

  Thank you

  There are a number of ways to do this, here are a few examples.

  1. If you are installing using the Explorer and you use BlackBerry handheld software version 4.3.0 +, you can add attributes to your jad file.

  How - to read the attributes of a JAD file programmatically
  Article number: DB-00638

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800646/How_To _...

  2. you may send to the user configuration information.  The application could be tuned for an email malicious message (some object, body, etc.) and read the configuration information.

  3. If the BlackBerry handheld computers have micro SD cards, the configuration information could be copied/stored/read the micro SD card.

• CSA 6.0.2 software agent failed to gather the configuration sent from the central server

  Have CSA 6.0.2 much workstaitions not answering a similar event:

  The agent software cannot compile configuration sent from the central server:
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4256): the CSIDL_SYSTEMX86 variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4550): the CSIDL_SYSTEMX86 variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4708): the ProcessName variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4771): the ProcessName variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5155): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5165): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5171): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5192): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5211): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5215): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5236): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5252): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5258): parse error
  C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5287)

  You may be experiencing bug CSCtg78612.  This occurs when the CSA MC is updated from a previous version of 6.0 to 6.0.2 and managed agents have not yet been upgraded.  You should be able to solve the problem by programming upgrades the agent for the affected hosts.

  You can view the full bug details here:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtg78612

  Scott

• VPN configuration file

  Hello

  I have a small question, I need to transfer the configuration of one VPN concentrator to another and I'm in the management of fle section and I'm clicking on the TFTP transfer but I don't know what controls to put in the fields. I see a box that says file hub and next to that is a box that says Action and there is the word Get in there and then I have 2 other boxes. I told TFTP server and the other says TFTP Server File.So can you tell me what that orders to put in those boxes to get the file to the VPN.

  Thank you

  There are several ways to do so.  Via TFTP, you can copy the CONFIGURATION file from a remote TFTP server using PUT.  TFTP file to the other 3 k and name CONFIG. BAK.  You can then go to the file management screen and Exchange configuration files.  Another option can be found on the link below.

  http://www.ciscotaccc.com/Kaidara-Advisor/security/showcase?case=K14611228

• Code to change the search option to search QD on the field in the Configuration item on a specific call screen

  We have an obligation to change the search option to search QD on the field in the Configuration item on a specific call screen.

  By default, all our leaders tend to have the default value 'Client' on the field Configuration point QD.  This is the case after that they took the customer on the call screen, when they enter the CI field and press ENTER, it refreshes automatically just the IC, where the selected customer is the owner of the aircraft.

  However, on a screen specific IPK call status, we want the search Configuration option to point QD to always change the option "Config Item Title', not 'customer '.

  No idea how to change this option only if you are using this specific screen and the default value remains the same for all the other forms of appeal?

  Thanks for any help,

  Ian

  Hey Ian!

  Appearently, you can take full control over the default search with a custom script menu item. This is an example how to do this in the Custom_InCallDetails.js file:

  function CustomLoad() {
    var ciqd = da.BTN_ITEM_REFQD;
    if(ciqd){
      var etp = da.ENTITY_TYPE;
      if(etp && etp.value=='7') ciqd.DefaultMenu = "CITYPEQUICK"
      else ciqd.DefaultMenu = "CUSTQUICK";
    }
  }
  

  (change the number 7 to the entity type Ref you need)

  Unfortunately this change script default for a user permanently. So if he had put any custom value before it is crushed.

  If you need to keep the default values personalized search menu, maybe you need further customization to store the user selected value in a wrapper environment and set the value to return if necessary (just an idea).

  Best regards, Gytis

• Oblix_OBWebGate_AuthnAndAuthz:... - cannot read the log configuration file.

  Hi all

  I have a painful problem with Oracle 10 g Webgate. I use Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate to procted resource Apache. I have a custom authentication plugin problem. is not yet resolved (https://forums.oracle.com/thread/2549716).

  Now I apply patch BP9 for Webgate (Oracle_Access_Manager10_1_4_3_0_BP09_Patch_linux64_APACHE22_WebGate), now I have a new problem, I am unable to get the OAM login page when trying to access my resources to Apache.

  The Error Message in the browser is:

  Internal server error

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Please contact the server administrator, root@localhost and inform them of the time the error occurred and anything you might have done that may have caused the error.

  More information about this error may be available in the server error log.

  Apache/2.2.3 (Oracle) Server at apache.tigerit.com Port 80
  In the error log file of  Apache I have found

  [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:20 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

   

   

  Can Anyone help me regarding this issue...

   

  Thanks

  Tamim Khan