setenv OTF file Configure Tomcat environment settings to serve as an integrator

Similar Questions

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• Cannot run the setenv.bat file

  Hello guys,.
  
  I started working on OracleAS integration B2B recently. I finished installing and I started to work on EDI X 12 transaction Internet scenario, I finished the whole process in the Oracle B2B user interface for this scenario, but I'm not able to run the setenv.bat file located in the
  ORACLE_HOME\ip\install way, when I'm clicking the setenv.bat file its does not, and I can't seem to set the classpath.
  Because of this problem, I am unable to go further, because I can't run the files deq.bat and enq.bat without running the setenv.bat file, please can anyone give me the solution for this problem.
  
  Thank you
  
  Sunny

  The solution is very simple: do not close the command prompt, but the second script from the prompt in command as well as the first! This is how it is intended to be used.

  If for any reason, you need to run a single script, you can modify to call the script setenv.bat as the first step:

  call %ORACLE_HOME%\ip\install\setenv.bat

  Or alternatively, you can change your environment and set the necessary properties manually so that they persist. However, I would still strongly advice against a double click on the scripts. You want to run it from a command prompt, to keep the command prompt when the script is done, otherwise you may miss important error messages.

• I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

  I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

  Windows: Tools > Options > advanced > network > settings
  OSX: Firefox > Preferences > advanced > network > settings
  Linux: edition > Preferences > advanced > network > settings
  Set your settings to connect to the 'No proxy', if you are not using a proxy.

  Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

• How can I configure my internet settings in win xp pack 3 sev...

  How can I configure my internet settings in win served xp pack 3. .IM using D-link router wireless via a prolink modem... plz help me to solve this prlm

  Hi Dayankr,

  1 - is the first time that you configure the wireless connection?

  2. do you have security software installed on the computer?

  See the Microsoft articles below and check if it helps.

  5 steps: how to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  To set up automatic wireless network configuration

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  The files and settings to remove the old computer when you make a file and the transfer settings Wizard?

  Hi KaraDay,

  When you use the files and Settings Transfer Wizard in Windows XP, it only transfers a copy of the files and settings on the computer.

  How to use the "files and Settings Transfer Wizard" in Windows XP

  http://support.Microsoft.com/kb/293118

• Problem with 'source file for the environment.

  Hello, I have problems with the supply environment file.

  I just read this post...

  How to "Source in the environment file.

  How to find the file of the environment. But after I Executive the .env file there is nothing set up. I checked "echo $APPL_TOP and there is nothing."

  
  

  My environmental record is:

  /D01/Oracle/vis/FS1/EBSapp/appl/APPSVIS_ebs122.env

  
  

  Then... I'm source Pentecost environmental record these steps:

  
  

  step 1: cd /d01/oracle/VIS/fs1/EBSapp/appl/APPSVIS_ebs122.env

  step 2:./APPSVIS_ebs122.env

  
  

  And still nothing.

  
  

  Help with this?

  
  

  Thank you.
  

  Send "source /d01/oracle/VIS/fs1/EBSapp/appl/APPSVIS_ebs122.env" followed by "env | ranking"to check.

  Thank you

  Hussein

• Configure Tomcat - access denied

  Hello!

  I installed a new server vCenter 4.1. When I try to open Configure Tomcat, then I got the following errro:

  Access is denied. Failed to open the service 'vctomcat '.

  VMware Web service is running.

  Any ideas?

  Try 'run as administrator '.

  Kind regards

  Ian

• Could not compile stylesheet error on tomcat environment.

  I created xslt to generate a pdf report. It works fine on the OPM when I run by OPM.
  
  But when I deployed same XSL on tomcat environment they do not compile error.
  
  As a result of the XSLT, I created
  
  and it gives me the error for this line
  
  IE ERROR: "syntax error in ' name() eq'attribute ' '.'
  
  
  
  <? XML version = "1.0" encoding = "iso-8859-1? >
  < xsl: stylesheet version = "1.0" xmlns: xsl = "http://www.w3.org/1999/XSL/Transform".
  xmlns:fo = "http://www.w3.org/1999/XSL/Format".
  xmlns:fn = "http://www.w3.org/2005/xpath-functions" >
  
  < xsl: output method = "xml" Indent = "Yes" encoding = "utf-8" omit-xml-declaration = "yes" / >
  
  < xsl: template match = "/" >
  
  < fo:root >
  
  < fo:layout - master-set >
  < fo:simple - page-master master-name = "my page" >
  < fo:region - body margin = "in 1" / >
  < / fo:simple - page-master >
  < / fo:layout - master-set >
  
  < fo:page - master-reference sequence = "my page" >
  < fo:flow = "xsl-region-body" flow-name >
  < fo:block >
  < xsl: mode if apply-templates = sΘlectionner 'dump' = ' / session, entity, instance, attribute "/ >
  < / fo:block >
  < / fo:flow >
  < / fo:page - sequence >
  < / fo:root >
  < / xsl: template >
  
  < xsl: template match = "" * "mode = 'dump' priority ="100">"
  < fo:block >
  
  
  
  
  < xsl: if test = "name () eq 'attribute' ' > '"
  < fo:block margin left = "1 cm" >
  
  "< xsl: for each select="@question-text ">
  "< xsl: value-of select =". » / > =
  < / xsl: foreach >
  < xsl: if test = "string-length (normalize-space (text (())) > 0" >
  < xsl: value - of select = "text ()" / >
  < / xsl: if >
  < / fo:block >
  < / xsl: if >
  
  
  
  
  < xsl: mode if apply-templates = sΘlectionner 'dump' = "*" / >
  < / fo:block >
  < / xsl: template >
  
  < / xsl: stylesheet >

  Maybe this works when you replace the eq with =

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CSA 6.0.2 software agent failed to gather the configuration sent from the central server

  Have CSA 6.0.2 much workstaitions not answering a similar event:

  The agent software cannot compile configuration sent from the central server:
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4256): the CSIDL_SYSTEMX86 variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4550): the CSIDL_SYSTEMX86 variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4708): the ProcessName variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(4771): the ProcessName variable was not declared
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5155): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5165): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5171): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5192): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5211): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5215): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5236): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5252): parse error
  (C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5258): parse error
  C:\Program Files\Cisco\CSAgent\cfg\agent.rul(5287)

  You may be experiencing bug CSCtg78612.  This occurs when the CSA MC is updated from a previous version of 6.0 to 6.0.2 and managed agents have not yet been upgraded.  You should be able to solve the problem by programming upgrades the agent for the affected hosts.

  You can view the full bug details here:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtg78612

  Scott

• Configuration of Cisco CUCM TFTP server

  Hello

  I currently have a publishing server and it subscribed two (v 6.1.3), I have now gone on 1250 magical devices where Cisco recommends a self-contained TFTP server.

  I understand to deploy it that I need to add it to the Publisher as a server and activate it then once upwards and running the Cisco TFTP service, then update the 150 Option address in my DHCP to the new TFTP server scope.

  A few questions, the TFTP server need the following installed at the same level as the Publisher/subscribers:

  • Dial plans
  • Unit packs
  • Regional settings

  Thank you and all other comments appreciated.

  Hi Ian,

  -By the architecture, the TFTP server would be pushing it to load the firmware and on phones - so you would need your packages of the device, containing all of the load firmware, to be on your server TFTP autonomous.

  -locale install files that phones Gets the TFTP server, such as their dictionary - so you'd need local on the standalone TFTP server

  -Dial plans are files used by the binary file of CCM. If you don't ever plan on the performance of the service of the CCM on the server, you don't need to install the dial on this server plans.  However, as far as practice, it is good to have dial plans, local and device packs downloaded on this standalone TFTP server, where server roles have been adjusted at a later stage in time.

  -Sriram

  Please note the useful messages!

• How to put the files in a subfolder of the server?

  How can ensure you that that DW will post a Web site in a subfolder. Working in CS5.5 DW I use godaddy and I'm putting DW in a subfolder so that a new website that I'm loading does not interfere with my main domain name. This is something you can do with zilla leader but I prefer working DW, if I can get there.

  I would really appreciate help with this. IWork in CS5.5

  Thank you.

  It is quite easy when you originally set up the Site...

  First of all, make the sub folder on your server. If your folder root (where your index.html page normally goes), it's something like 'public' create a folder inside 'public' as "testsite" (without the quotes)

  On page 4 of your site (at your site definition) settings, set FTP address as a path to this folder instead of the root of the site, like this...

  How do you connect to the server? : FTP

  What is the hostname or FTP your Web server address? : yourwebsite.com

  To store your files in this folder on the server do you want? : / public/testsite (this is the address of the created folder previously)

  What is your FTP Log-In? : connection

  What is your FTP password? : password

• Target configuration of AGENT on the server

  Hello
  
  Actually I have installed the client components on my system and component (agent) ODI server on my instance target... now how to configure the agent on my server target so that it can be used my multiple users... How can I create a scheduler agent on my server target to be used from multiple computers cleint of scheduling...
  
  say I started the my agent on the server... what nedopil to the file odiparar.bat on the target server is also targeting...
  
  
  
  
  Thanks in advance...
  
  Published by: user4315565 on January 26, 2010 13:52

  Using your numbers, you must follow these steps:

  3, 2, 4, 1

  and then use the 'Test' button in the physical agent to see if it works...

  Works?

  Cezar Santos
  [www.odiexperts.com]

• I have reset firefox because of the slow, now it says firefox is configured to use a proxy server refusing connections, what a waste! r

  I am using windows 7 Home premium. Button Firefox connected if slow to get on the internet, so I used the reset button. Now, firefox is configured to use the proxy server refusing connections, unreal... I hope you can help soon... Thank you, Donna

  you are the very welcome!

  It should be possible to select what happens when you click on an e-mail link in the applications Panel in the firefox options. For more information, see change the program used to open e-mail links