CSA 6.0.2 software agent failed to gather the configuration sent from the central server

Similar Questions

• Content file download failed. Reason: The RPC server is unavailable.

  Hello

  Please help, I have the following error with my WSUS. The clocks are so successful.

  According to the survey, it is said "updated the files needed: 2589 ' 'downloaded 0.0 MB of 30 years, MB 196,09.

  MT event logs show ID 364

  Content file download failed. Reason: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) Source file: /msdownload/update/v3-19990518/cabpool/windowsdesktopsearch-kb926356-v2-x86-nld_72b01991a8ebadf72d2512e19234943920ee4104.exe Destination file: c:\WSUS\WsusContent\04\72B01991A8EBADF72D2512E19234943920EE4104.exe

  I opened the firewall to allow full access to the net to the WSUS server, so it does not use a proxy.

  Please for any assistance you can offer.

  Did you run the Bits? Rob - bicycle - Mark Twain said it is good.

• Failed to load the metadata server using GET_DOC_METADATA_INFO content model?

  Hi all
  
  I create connection in Jdeveloper to the repository of content both are 11.1.1.6.0 version. I'm creating RIDC Socket type Socket.
  everything by testing the connection I get under Error.UCM runs in other ways machine come IP. trying to connect from my local Jdeveloper.
  
  Test failed:
  Failed to load the metadata server using GET_DOC_METADATA_INFO content model.
  Permission denied. Address ' XX. XX. XX. XX'(IP) is not an authorized remote socket address. (IP replaced by XX...)
  
  Why his error.do showing that I need to put any changes of the UCM let me know problem question
  
  Please give me an idea about this error and the solution for the same.
  
  
  Concerning
  Siva sery

  To eliminate the first manifesto, see this post: fail to connect to the content if server use 'web' for the RIDC socket type and check that the other IP is allowed, amongst, IPs (you can use a mask, or type it directly) - do not forget to restart the server after the change.

  If this does not help, test, if other services such as DOC_INFO_BY_NAME can be called via RIDC, or if they have the same problem.

• Windows Update Agent fails to detect the updates (Windows Server WSUS with SCCM)

  Howdy

  We recently integreated WSUS in SCCM 2012, which means WSUS updates are now provided through the software Center instead of through the Windows Update client. This does not work as expected.

  However, we are using Kaspersky Endpoint Security, which has a function of software vulnerability report that we want to use. This could inform us of all the machines that do not have all their updates installed. It is a simpler than using SCCM reports interface. When searching for vulnerabilities, Kaspersky Network agent uses the Windows Update Agent service to find updates in WSUS. This function does not work on our customers, where it can detect a single Windows Update. I have a transcript example from the WindowsUpdate.log file below:

  ========================================================================================
  2016-05-25 16:10:37:917 884 7ac Agent *.
  2016-05-25 16:10:37:917 884 7ac Agent * START * Agent: finding updates [CallerId = Kaspersky Network Agent] of
  2016-05-25 16:10:37:917 884 7ac Agent *.
  2016-05-25 16:10:37:917 884 7ac Agent * Include potentially this cancels the updates
  2016-05-25 16:10:37:917 884 7ac Agent * Online = Yes; Ignore download priority = No
  2016-05-25 16:10:37:917 884 7ac Agent * criteria = "IsInstalled = 0 AND IsHidden = 0 OR IsInstalled = 1".
  2016-05-25 16:10:37:917 884 7ac Agent * ServiceID = {00000000-0000-0000-0000-000000000000} third party service
  2016-05-25 16:10:37:917 884 7ac Agent * scope of search = {Machine}
  2016-05-25 16:10:37:918 3988 d5c COMAPI<-- submitted="" --="" comapi:="" search="" [clientid="Kaspersky" network="">
  2016-05-25 16:10:38:826 884 7ac PT +++ PT: Synchronizing server updates +++
  2016-05-25 16:10:38:826 884 7ac PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, server URL = http://OURSCCMSERVER:8530/ClientWebService/client.asmx
  2016-05-25 16:10:57:878 884 7ac PT +++ PT: synchronizing extended update info +++
  2016-05-25 16:10:57:878 884 7ac PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, server URL = http://OURSCCMSERVER:8530/ClientWebService/client.asmx
  2016-05-25 16:10:57:986 884 7ac Agent * updated added {80FEF50B-F349-4BDC-B781-FF8CD6D913F6}.201 in search result
  2016-05-25 16:10:57:986 884 7ac Agent * updates found 1 to 123 categories in the search. evaluated Appl. rules of 1372 out of 2495 deployed entities
  2016-05-25 16:10:57:988 884 7ac Agent *.
  2016-05-25 16:10:57:988 884 7ac Agent * END * Agent: finding updates [CallerId = Kaspersky Network Agent] of
  2016-05-25 16:10:57:988 884 7ac Agent *.
  2016-05-25 16:10:57:990 b 3988 6-0 COMAPI > COMAPI - RECOVERY -: search [ClientId = Kaspersky Network Agent]
  2016-05-25 16:10:57:991 3988 COMAPI 6 b 0 - updates found = 1
  2016-05-25 16:10:57:991 b 3988 6-0 COMAPI-
  2016-05-25 16:10:57:991 b 3988 6-0 COMAPI - END--COMAPI: search [ClientId = Kaspersky Network Agent]
  2016-05-25 16:10:57:991 b 3988 6-0 COMAPI-
  ========================================================================================

  As you can see on this update of the transcript were found only 1. This was taken from a test machine that has been built recently and had lost a large part of the updates.

  We also have in our devices infrastructure traditional WSUS running on a different server (not SCCM), which are reports in fine and properly, Kaspersky detects missing updates.

  We determined with Kaspersky that the problem lies in the Windows Update agent and not their software. Can anyone tell if the question is because we use SCCM for updates (and therefore Windows Update agent is not working properly) or that there is another issue that can be resolved?

  Russell

  It is a forum for specific consumers.

  You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus

• Failed to create the central inventory in 11g

  Salvation of DBA
  
  DB version: 11.0.1.7.0
  OS Linux 86 x 64
  
  I am applying cpu patch on one of our ORACLE_HOME and ASM_HOME when running $opatch lsinventory I'm gettting the following errors
  lsinventory opatch $
  Citing O Patch 11.1 .0.6.2
  
  Setup Oracle interim Patch version 11.1.0.6.2
  Copyright (c) 2007, Oracle Corporation. All rights reserved.
  
  
  Oracle home: /opt/app/oracle/product/11.1.0.7
  Inventory Center: / opt/app/oraInventory
  from: /etc/oraInst.loc
  OPatch version: 11.1.0.6.2
  YES version: 11.1.0.7.0
  YES location: /opt/app/oracle/product/11.1.0.7/oui
  Location of the log file: /opt/app/oracle/product/11.1.0.7/cfgtoollogs/opatch/opatch2012-09-05_20-18-45PM.log
  
  
  
  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.
  
  LsInventorySession failed: cannot create patchObject
  
  OPatch failed with the error code 73
  
  Please suggest I tried detaching ORACLE_HOME and put back in place when I re joined it there no House ASM and CRS entries
  Here's what I have in /opt/app/oraInventory/ContentsXML/inventory.xml
  
  < INVENTORY >
  < VERSION_INFO >
  < SAVED_WITH > 11.1.0.7.0 < / SAVED_WITH >
  < MINIMUM_VER > 2.1.0.6.0 < / MINIMUM_VER >
  < / VERSION_INFO >
  < HOME_LIST >
  < NAME HOME = "" LOC="/opt/app/oracle/product/11.1.0.7" TYPE = "O" IDX = "1" > ""
  < NODE_LIST >
  < NAME of the NŒUD = "Node1" / >
  < NAME of the NŒUD = "node2" / >
  < / NODE_LIST >
  < / HOME >
  < / HOME_LIST >
  < / INVENTORY >
  
  It is a 2 cluster nodes on the other node, I am able to get the results of lsinventory.
  
  Please notify
  
  Thank you

  OPatch failed with the error code 73
  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.

  Opatch failed to load the inventory for the given Oracle Home [ID 1308866.1]

  Try the steps below to re-create the inventory
  Steps to recreate Central Inventory (oraInventory) in the houses of RDBMS [ID 556834.1]

• Failed to create the administration server

  Hello gurus
  
  I'm new to Weblogic.i began to learn oracle weblogic 10.0.1.
  
  I created a domain called base_domain.i did not create Admin Server for base_domain.
  
  I want to create server admin asl as well as servers run on existing domain only...
  
  
  Please help on this one.
  
  Thank you
  Yakub

  The "Clustering" section in this post (http://middlewaremagic.com/weblogic/?p=7265) should help you on the way.

• Installation of the SQL Server Agent on the Virtual Center Server

  Hello everyone

  I installed VC2.5 on a PowerEdge 1950 server.  The SQL VC database will reside on a different server, of course, I understand that you need to create a system DSN.  But he also stated that the "SQL Server Agent" must run on the VC server.  How to install SQL Server agent?  It is installed from the SQL installation CD?

  Thank you!!!

  SQL Agent is part of the SQL Server installation and only would be located on the database server.

• CSA v5.0.0.217 Agent Software Upgrade

  About 2 months ago, I upgraded our software agent of v5.0.0.176 to v5.0.0.210. Everything went well and all of our agents automatically pulled down of the upgrade.

  Currently I am moving from v5.0.0.210 to v5.0.0.217. However, no agents are able to pull down the new update.

  The agents are currently in test mode, so nothing should be blocking the download.

  Any ideas on where I could find out what is the cause of this problem?

  Thank you.

  Have you changed an existing scheduled update to use the latest software update?

  I tried once and it did not work as expected.

  It worked when I created a new scheduled update.

  Tom

• Deploy the agent EM12C initialization of the phase error sending software agent

  During the deployment of EM12C in the initialization stage - software agent agent sent to the error of host target
  The file to the SGD/m02 / midd/WHO/sysman/agent / 12.1.0.2.0 AgentCore226. Zip is copied to the host/m01 ADATMP_2013 on 192.168.165.83 - 03-28 _11-01-33 - error failure AM message: PROV - 16011: Auth fail
  Exit code: 0
  (1) the user authentication is oracle
  (2) the target users oracle sudo ls-l/root this command
  (3) the em can SSH connection to the target host

  Why are you using "-ignorePrereqs" parameter? You should not use this parameter to this than recommended by Oracle support or running in some soaps question. It will ignore any pre - req check and it is not recommended to ignore any failure pre - req controls, that can cause more problems with agent later.

  one) from ping target machine omshost
  Ping
  (b) of the Agent machine, run the below

  wget http://:/empbs/genwallet
  or
  wget https://:/empbs/genwallet
  Someone at - he of the foregoing should be connected to the machine of the WHO.

  Above two work then try installing the agent with on the "-ignorePrereqs" parameter and look in the more detailed error log file: agent_home/cfgtoollogs/agentdeploy/*.*

• Failed: Cannot access the remote Converter Standalone Agent service. It does not exist or is not responding.

  When I try to run the converter that we receive the following error message, FAILED: cannot access the remote Converter Standalone Agent service. It does not exist or is not responding.

  RaymondT

  Given that the conversion works, you can have a software or configuration of Windows Server. Check the Windows event logs. Anything in current policies that could prevent?

• Remote Graphics Software: Remote Graphics Software activation failed

  Hallo,

  I had to replace an old workstation with HP Remote Graphics Software (the workstation of the sender, the machine with the reception part is always the same) on this subject.

  Since the installation of RGS 6.0.1 on the new machine, I get a pop up whenever I connect to it:

  Advanced features activation failed

  Already, I discovered that this has something do with activation without the software work.

  Version of the sender is 6.0.1 as shown above.

  Version of receiver is 7.0.1.

  There are two different versions, because it was setup on the old sender (with always the same receiver machine) and it worked very well there.

  I also tried the newer versions of the sender, still does not.

  As far I knew the remote software activation should occur automatically when having an internet connection.

  I have internet and no proxy or something fancy.

  By coincidence, I found an article that describes the manual setting of the license server in the island of receiver config.

  There was still an old man and I changed it to the last (I hope):

  　

  15.0.92.201

  Same settings for the firewall on the old and the new sender's machine.

  He worked with the old machine, we also have another pair of workstations transceiver, which work fine as well.

  I now use the license file, from the old machine to the new machine.

  Could it be a problem (although I did not see a MAC address restriction in the license file itself)?

  Best regards

  n7c

  To activate the speed of HP or STROKE with RGS receiver versions 7.1.1 (or earlier version) the activation server address must be changed by editing the Configuration file of RGS receiver or using the receiver RGS (details below) Configuration tool.
  RGS receiver Configuration file
  The RGS receiver Configuration file, rgreceiverconfig, is located in both
  C:\Program Files (x 86) \Hewlett-Packard\Remote graphic Receiver\regeceiverconfig (Windows)
  / etc/opt/hpremote/rgreceiver/rgreceiverconfig (Linux)
  Locate the Rgreceiver.Registration.IpAddress property in the file, it uncomment and set it as follows:
  Rgreceiver.Registration.IpAddress = 15.0.92.201
  RGS receiver Configuration tool
  With RGS 7.1 the server address can also change with the receiverConfigApp.exe on Windows or receiverConfigApp.sh on Linux. The address of the server is in the Activation tab.
  Also find URLs for the authorization of RGS user guide
  http://h10032.www1.HP.com/CTG/manual/c01624233.PDF

  Best regards;
  REDA
  I am an employee of HP
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

• Photosmart Premium C410: C410 Software Installation fails for not having not supported USB, Win7 Pro

  I just got a laptop HP ProBook G3 450 with Windows 7 Pro 64 bit. I'm unable to install the Photosmart C410 series software and it fails when checking the system requirements, saying the USB hardware and necessary drivers are not present.  I tried with and without a USB cable installed and also tried to disable the security firewall. It fails for the same when USB problem only connected via WiFi. The discoveries of software troubleshooting HP Print and Scan doctor that the software is not fully installed, for example, without help.  I can connect to the printer and print a test page using my WiFi network using a web browser, and I managed to install it on two other portable Win7 in the past.

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• Failed to install the software. Message "failed WOWexec."

  I am trying to install educational software. Advantage of high school 2008. According to date of Microsoft Basic, it should be compatible w/Vista. The software is divided by themes. Mathematics, science, history... etc I have intall all subjects but biology. I run the Setup it to run, but I get this message:

  Error
  WoWexec failed
  Error code: 2
  Message text: Thesystem cannot find the specified file.
  Abandonment of Installation.

  What does that mean? I was told we can b/c I'm trying to run a program for a 32-bit version of Vista and I have a computer with a 64-bit version. I don't know if it's true. If this is true can I install a 32-bit version of Vista on the same computer? or y at - it another way I run this program?
  Any information will be greatly appreciated.  Thanks in advance!

  Hello Makken,

  Thank you for using the Microsoft Windows Vista Forums.

  Have you tried to uninstall the software and reinstall?  How do you install this software, be down loading or don't you have CD/DVD?  You should be able to install this software, even if it is the 32-bit version.  One of the biggest advantages of using a 64 bit version of Windows Vista is the ability to access physical memory (RAM) that is above the range of 4 gigabytes (GB). This physical memory is not addressable by 32-bit versions of Windows Vista.

  According to the version of Windows Vista is installed, a 64 bit version of Windows Vista supports from 1 GB of RAM, more than 128 GB of RAM. The ability to address more physical allows memory Windows Vista minimize the time required to swap processes in and out of physical memory. Therefore, Windows Vista can manage the process more efficiently. This management memory feature to improve the overall performance of Windows Vista.
  What must be taken into account when you install a 64 bit version of Windows Vista

  • 64-bit device drivers are not available for one or more devices in your computer.
  • Device drivers must be digitally signed.
  • device drivers 32 bit are not supported.
  • 32-bit programs is perhaps not fully compatible with a 64-bit operating system.
  • It can be difficult to locate programs written specifically for a 64-bit operating system.
  • Not all hardware devices may be compatible with a 64 bit version of Windows Vista.

  A description of the differences between 32-bit versions of Windows Vista and 64 bit versions of Windows Vista
  http://support.Microsoft.com/kb/946765

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Xperia Z2 will not turn on - error message: software update failed

  Hi I would appreciate help! My Xperia Z2 aged for 4 months worked fine until today. It was connected to my Mac, and I was asked to update the bridge of Sony for Mac.. After about 10 minutes he said failed update on the computer. I unplugged the phone, but now the phone turns - all I get is an error message indicating "echec failed software update, make sure that your phone is connected to the computer and try again."

  However, when I connect it, the device is not recognized.

  I can not turn off the phone or, all that happens is a continuous loop of red light, then the error message (it is supported at the moment)

  Can anyone help?

  You should rather bridge of Sony.

• Unable to install Internet dongle, error: failed to install the software & unable to connect.

  Original title: failure of the internet

  not able to connect to internet with zte mf 190 dongle Mr. the problem began when for some reason any I uninstalled the software of the electronic key. Now when I re - insert the dongle it doesn't show signs of usb. In addition, I deleted the software so I can not connect to internet unless the usb dongle is displayed. He said: software installation failed & unable to connect. Maybe there is a problem with the windows drivers. Need help.

  Hello

  I can understand the inconvenience caused to you and I appreciate your efforts to resolve the issue.

  This issue may be caused if one of the many reasons as USB driver are corrupt or unstable PC requires an update for problems that could conflict with an external USB hard disk, Windows may be missing other problems hardware or software updates.

  I would like to know;

  1. What is the brand and model of your computer?

  2. Have you checked with other USB ports?

  3. The problem occurs with other USB devices?

  I would follow the methods below and check if that helps.

  Method 1: Run the Fixit

  Tips for solving common driver problems

  If the problem persists, follow method 2.

  Method 2: Uninstall and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  1. Press the Start key on the keyboard.
  2. Go in Panel.
  3. Go to Device Manager.
  4. Expand Bus USB controllers.
  5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  6. Restart the computer, it automatically reinstall the USB controllers .
  7. Plug in the removable USB storage device and test to make sure that the problem is solved.

  If the problem persists, follow method 3.

  Method 3:

  Follow the instructions in the given article:

  Install a USB device

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni