configuration HP ENVY 4507

Similar Questions

• HP Envy 4507: Printer error state

  Hello

  My printer does not print.

  He said that it is in "a State of error."

  The blue light is on that indicates it is bound upward to wireless technology. When I click on the button live wireless it says on.

  It prints a copy of the end scanner.

  It allows to print test messages that says:

  No problems found.  Congratulations for the success put in place of your wireless printer.

  Wireless on - pass

  Wirelss work - Pass

  Signal - Excellent quality

  Connected - pass

  Network name - found pass

  Chanel - 11

  All this is pass.

  Current configuration:-connected to the Internet.

  I can't understand what is wrong with it!  It works as well, because I got it about 2 months ago.

  Please can someone help!

  Welcome to the HP community @marinag,

  I wanted to respond to your message on the error state error message you notice about your envy 4507, to see if we can reach a resolution for you.

  You can make standard copies at the front of the printer, which does not imply the computer somehow. Because the working copies, the equipment is correct.

  You mentioned that you are also connected the printer to use wireless Direct, which means that the printer will not be able to print when you are connected to the internet, so this may be a problem.

  Wireless printing Center (Direct wireless info)

  Maybe try disabling wireless live by accessing the Setup Menu or the Menu on your printer wireless. Turn on the printer and then connect the printer with the following instructions to connect to the wireless network.

  HP ENVY 4500, HP Deskjet 3540 printers - printer wireless (Windows) installation

  If you have any questions, please let me know and I'll do my best to help!

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I've helped to achieve a settlement.

• Want 4507: Connection of HP Envy 4507 printer to a desktop using Ubuntu

  How can I connect HP Envy 4507 desk top computer printer using Ubuntu?

  Hi @wezzyman,

  I'm sorry, but to get your question more than exhibition I suggest posting in the Ubuntu forums because it is a problem of Ubuntu. You can do it at http://ubuntuforums.org/

  I hope this helps!

• Incompatible cartridge envy 4507 at initial start-up

  Hi, first time here. I just opened the box on a brand new hp envy 4507.
  I'm stuck at the first hurdle! I inserted the ink cartridges supplied with the printer and the screen bed "incompatible cartridges not intended for the use of this printer.
  In case of problems on the website says to clean the contacts by using the items, that I have not at hand. As it is just out of the box, I'd be surprised if that's the problem. They look perfectly clean and free of scratches, etc.
  Just wondering if someone else has had this problem at the initial start up. The impression that I'm maybe something wrong.
  I took the stickers protection out of the cartridges, I tried switching market. I looked at the contacts.
  Is there something that I am missing?

  Thanks for any help.

  Your welcome, glad it's working now.

  Gremlins at work or possible tip dry for the flow of ink that has decided to go down with repeated removal and insertion of the cartridge.  Has been known to occur when the cartridge is approaching the expiration date.

• HP ENVY 4507: HP ENVY 4507 can this label printing

  HP ENVY 4507

  Take this printer by printing labels please, if someone can help me please

  Thank you

  A quick response would be apprieciated as only bought last week, and the seller said he should do as most printers have this option. Have tried and can't see any reference to print labels, will resume and get a refund.

  It's OK now found how do labels that I need, but doesn't show do not how to make on this printer and came back to a Web site that provides labels and they showed me how to do it using Word.

  Thanks anyway

• HP Envy 4507: Problems with printing wirelessly to my iMac

  The printer worked fine without thread when implemented since January 2015. But this week (early May) I can't print wireless. The printer is on my network. I can access it from the iMac using the ip address in the browser, and it seems OK. I uninstalled the HP utility software and it - redownloaded, but when automatic running connect it does not locate the printer. Printers and fax settings I have deleted the printer and tried to readd it. It locates the printer, but it does not automatically select the driver. I manually select and click Add and I tells me that it cannot connect to the printer. When I try and add it via the IP (even tried with a static IP address) I tells me that the printer is not on my network. As I said before this week, it was fine. I tried most of the things on the forums - even at zero complete remission of the printing system on the printer restore to the factory settings and the system prefs and resettign of the printer itself. My OS is 10.10.3 and I use a BT home Hub 5.

  Hi @DrChops,

  Welcome to the HP Forums, I'd love to help you with your envy 4507. We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  If please remove and re-add the printer now and let me know if the feeding cycle solves the problem.

• How to configure HP ENVY 700 - 210xt to install the graphics card EVGA 650 TI boost.

  Can someone tell me how to install the graphics card EVGA 650 TI boost in the

  HP ENVY 700-210xt

  Product number: E9G99AV

  I replaced the power supply with Corsair RM 650 watt power supply that works very well. Now, I want to go to the graphics card EVGA 650 TI boost. Except, I can't get the driver to load with period of installed equipment. When I put the card into the PCI 16 x slot the computer starts with a blank screen. I pass the DVI video port old computer and the new port card white screen of same at startup. If I turn the PCIe port disabled in BIOS, it starts with the embedded video, but same thing impossible to load drivers that are not able to locate the new video card hardware. Makes me crazy! I don't know that I don't know how to configure the Bios correctly or something. Can anyone help?

  Hello:

  Please see my response to your other post on the link below.

  http://h30434.www3.HP.com/T5/desktop-hardware/how-to-configure-to-install-EVGA-650-TI-boost-video-car-in/m-p/3117171#M71438

• VSS configuration on cisco 4507 R + E

  Hi all

  This is the first time I'll configure VSS, I learned some stuff online, but most of them was 6500 Series also I need expert advice that's why I post here.

  Right now I have 2 brand new Cisco 4507 R + E and planning set up VSS on it. The hardware details are below.

  NAME: 'switch system', DESCR: "" Cisco Systems, Inc. WS-switch 7 slot C4507R + E ".
  PID: WS-C4507R + E, VID: V09, SN: FXS1937Q0ZE

  NAME: "line card (slot 1) ', DESCR:"1000BaseX (SFP) with 24 Ports SFP Jumbo Frame Support.
  -Other - PID: WS - X 4724-SFP-E, VID: V01, SN: CAT1946L468

  NAME: 'supervisor (slot 3)', DESCR: ' Sup 8 - E 10GE (SFP +), 1000BaseX (SFP) with 8 Ports SFP + ".
  PID: WS - X 45-SUP8-E, VID: V05, SN: CAT1947L0PP

  NAME: 'TenGigabitEthernet3/1', DESCR: 'SFP-10Gbase-SR.
  PID: SFP - 10 G - SR, VID: V03, SN: FNS19450B6N

  • Please let me know the correct way to set up this series as vss
  • do I need an ideal config on the two switch (during a power failure, if the other switch does not work then I think than its necessity even config as the first) sorry maybe I'm confused by VSS and HSRP work...: p.
  • How to connect to any other device L3 connected to vs. With L3 port channel?

  To make these clear confusion for me, thank you.

  Luck shines on you.

  Sup8E means that you can activate Easily VSS.

• HP ENVY 4507: Envy 4500 only prints a PDF from PC

  OK, so this is the 4th or 5th time I posted on this useless printer. Now for almost 6 months. And 3 different HP printers. I can only print from PC in pdf format. If I select a word doc or printing online. The printer icon loads and that's it. It does nothing else. There is none of the queues. I'm so fed up with it. I will never buy a HP item ever. Includng the desktop PC, I was sold as a gaming PC. With a 545GT graphics card. I can barely stay on the line as overheating but it's a whole different story lol., I just want to do what I did with each printer ther I used. Press on print and it prints. Why are there 2 profiles? Series 4500 and 4500 networking. I have uninstalled re-installed and tried all the work around known to humanity. Wil still only print to PDF files and nothing else. Please can you help me. This is my last attempt to fix this printer. In the case of failure embarks on a garbage depot. I used to promote HP products, but not more. They have dropped the ball. Cheap and nasty with components not conforming to standards hidden inside the material. Made in China is a big attention I'm afraid.

  Kind regards

  Mabrouk

  Hi @zookeeperz,

  I read your post and see that the printer will only print the PDF documents. Usually, it's the opposite. I want to help you.

  You use the latest drivers? Here is a link if you need it. HP ENVY 4500 e-All-in-One Printer full feature software and drivers series.

  If the printer is listed as the 4500 series and the networking of 4500, then most likely the USB and a network driver are both installed for the printer. It is in the devices window and printers?

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  I suggest to install a generic driver to see if you have the same results.

  On the computer, go to start, devices and printers, right-click on your printer and select printer properties.

  Click the Advanced tab and click new driver, and then click Next.

  HP Deskjet 9800 by selecting in the list or the Deskjet 990c printer, click Next, Finish, and apply the settings.

  (you can always go back and revert to the original printer driver)

  How is the printer connected? (USB, Ethernet, WiFi)

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  Please let me know the results. Thank you.

• Configuration printer ENVY 5530

  Replacement of broken printer HP 6510 with ENVY 5530. Followed the instructions on the printer and recognized as a separate connection on the list of connections. Then tried to load the program from the disk to connect to the wireless computer (later tried USB but also omitted) display indicates failure in the middle of the phase of final connection. Problems search seems to indicate that the base drivers are not present even if they are probably responsible for disk and busiest when prompted on the internet. Doctor HP printer is not move me. While the fire of such options that registry cleaners and disableing tring walls I got an error 0x000003eb come. Also I tried removing and reloading program a couple of times. Any suggestions?

  Thanks for your help. Actually David and Grace has solved the problem yesterday through technical assistance online after a few hours of tweaking and take control of the computer. Finally solved I think that changing the wireless address codes. Thank you when even (it seemed a fairly complicated process that had baffled for a while)

• HP Envy 4507: How can I turn hp envy 4507

  I try to install my printer to my computer chromebook asks a CV by email, but don't know where to find them?

  Hello

  It sits on your network? If so, press on him we serve button (the one under the wireless button). If not, you have to connect it to your network first.

  Kind regards.

• HP envy 4507: printing on card

  Hi, I bought this & asked the shop if it is allowed to use the card to print, the guy in the store said yes, but when I tried to print on the card it will not run through the machine. Please could someone please help I card orders and am not able to make their

• HP Envy 4507: ink does not dry on paper

  in the last few days ink not dry not on paper. I cleaned the print heads and tried everything. Can anyone help?

  When you say that the bands are vertical - this is when the print is printed in landscape (with bands in the short direction of paper)?  Make sure that you have selected the paper suitable for Media type.  Also, I would say best way to get better prints.

  

  Address scratches see the troubleshooting steps in the paper here.  Diagnostics in step 8 must be printed on plain paper.  The color bars look correct?  Black does not matter when printing on glossy paper.

  Figure: Diagnostic test page areas

• Want 4507: Printing problems with envy 4507

  I bought my printer a couple of months and everything worked fine. I have not used for a few weeks and now it seems to be a problem. When I print a PDF for example, any black text to print at all. For a Word document, the text (black) comes out as a very light gray. Color of text is fine in both cases. A printer test page prints just color bars, but also some Black hooks. The print quality is fine, its only missing bits.

  This happens if im wireless for my laptop or phone, or via USB connection.  The ink levels are high in the two cartridges, I tried cleaning cartridges and putting back them in place. I also re-installed the latest version of the software on my laptop (Windows 10) and I reset the printer to factory settings. Nothing seems to solve this problem. Someone at - it other suggestions I can try?

  Hello

  Please click HERE to access the procedure which should solve the problem.

• HP envy 4507: pipeline of filters stop printing and closes

  Hello

  having only bought my printer yesterday ive been using it does not this morning that now he stopped to tell the filter pipeline host and close.

  can someone please. I am based on windows vista.

  I am not that technically minded so would appreciate simple instructions please

  Thank you

  Hello @vicki79 and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you receive errors of pipeline.  I'd be happy to try to help!

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!