Configuration of DADDY mod_plsql file problem.

Similar Questions

• Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had...

  Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3

  Hi BrianJ641,

  Follow the steps in the article.

  http://support.Microsoft.com/kb/307545

  Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.

• How to configure partial between 2 files?

  How to configure partial between 2 files?

  I recommend the second copy.  Other options are Microsoft SyncToy and Karen's Replicator . Boulder computer Maven

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• Configure vswitches from a .csv file - problem

  I have a script that works very well for the installation of my virtual past by using the updatevirtualswitch method. (Thanks to LucD, see here: ) http://communities.VMware.com/message/1556669#1556669 )

  I now want to go further and to feed my script with variables from a .csv file.

  It works fine for all, with the exception of the definition of vmnic. Description of the problem:

  Excerpt from my .csv file:

  lannics; dmznic1; dmznic2; dmznic3; storagenics; vmotionnics;

  @("vmnic0"); @("vmnic1", "vmnic2");

  Then import the settings from the csv file, example:

  $lannics = $parameterfile.dmznic1

  Now, if I check what's in $dmznic1, I have the good: @("vmnic1", "vmnic2")

  But it seems to be a string, not a true table. Therefore, I can not pass it to my updatevirtualswitch function:

  function standardvswitch {}

  Param ($esx, $vs, [string []] $dmznic1)

  ....

  $ns. UpdateVirtualSwitch ($vs, $vsSpec)

  }

  So the question is: how could I get my .csv file information, so that it can be used for a definition of vmnic compatible with the UpdateVirtualSwitch method?

  Thanks for your help or ideas!

  I've done a few tests more and saw that my previous solution does not work. "But one that follows). I'll try to explain how it works. In the .csv file, a semicolon is used as a field separator. This means that you can use a comma in a field to separate the members of the group. The Import-CSV cmdlet reads the .csv file and - separator "," parameter instructs the cmdlet that a semicolon is the field delimiter. The output of the Import-CSV cmdlet is piped in a ForEach-Object cmdlet. In the scriptblock ForEach-Object according to the value of the dmznic1 property string is shared by the comma, so each string before, between and after the comma will become a member of separate table. This table is assigned to the dmznic1 property. Loop loop through all the members of the Group and displays them on separate lines. So you can see that it is really a picture.

  Import-CSV -Path LanNics.CSV -Delimiter ";" | `
  ForEach-Object {
    $_.dmznic1 = ($_.dmznic1).split(",")
    for ($i=0;$i -lt $_.dmznic1.length; $i++) {
      Write-Output $_.dmznic1[$i]
    }
  }
  

  See the attached screenshot for output.

  I think that this solution is more beautiful that create a different column for each vmnic because in my solution you don't have to know in advance how many cards you have.

  Post edited by: RvdNieuwendijk

• system32\configuration\system or corrupted - boot problem

  I have a laptop, Inspiron 1525, with XP Home Edition.  I keept is message read, "" Windows didn't start because the folloing file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "I tried the repair process, the F8 key, including" last good configuration, all to no known use.  Help, please

  Hello dutcchess
  I just down loaded this how to from microsoft

  When you try to start or restart your Windows XP-based computer, you may receive one of the following error messages:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE

  Stop: c0000218 {Registry file failure} the registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or replacing

  System error: Lsass.exe
  When you try to update a password the return status indicates that the value provided as the current password is not correct.

  Guided Help to recover a corrupted registry that prevents Windows XP startup

  Guided Help is available to help recover a corrupted registry that prevents Windows XP startup. Guided Help can automatically perform the steps for you. Actions running this guided help can be undone after Guided Help is complete. To undo the actions running this Guided Help to restore corrupted registry files, start the Recovery Console, and then manually copy the Windows\Tmp\*.bak files in the Windows\System32\Config folder. Be sure to rename the files to remove the .bak extension. For more information about guided help, click on the number below to view the article in the Microsoft Knowledge Base: 915092 (http://support.microsoft.com/kb/915092/) Description of guided help for Microsoft Knowledge Base articles Requirements to install and to use this guided help You must be logged to Windows using an administrator account to install and to use this guided help. You must run Windows XP Home Edition, Windows XP Professional, Windows XP Media Center Edition or Windows XP Edition Tablet PC to install and to use this guided help. You must first download Guided Help. To start, click on the following link: Download Guided Help (http://support.microsoft.com/kb/307545/)

  Manual steps to recover a corrupted registry that prevents the start of the procedure that this article describes to Windows XP using System Restore and Recovery Console. This article lists also all required specific steps to ensure that the process is fully completed. When you have completed this procedure, the system returns to a state very close to the State until the problem occurred. If you have ever run NTBackup and completed a system state backup, you don't have to follow the procedures in parts two and three. You can go to part IV. First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the System32\Config folder. When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
  
  Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
• When the "Welcome" screen appears, press R to start the Recovery Console.
• If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
• When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
• At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
  MD tmp
  copy c:\windows\system32\config\system c:\windows\tmp\system.bak
  copy c:\windows\system32\config\software c:\windows\tmp\software.bak
  Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
  copy c:\windows\system32\config\security c:\windows\tmp\security.bak
  copy c:\windows\system32\config\default c:\windows\tmp\default.bak

  delete c:\windows\system32\config\system
  delete c:\windows\system32\config\software
  Delete c:\windows\system32\config\sam
  delete c:\windows\system32\config\security
  Delete c:\windows\system32\config\default

  Copy c:\windows\repair\system c:\windows\system32\config\system
  copy c:\windows\repair\software c:\windows\system32\config\software
  copy c:\windows\repair\sam c:\windows\system32\config\sam
  Copy c:\windows\repair\security c:\windows\system32\config\security
  Copy c:\windows\repair\default c:\windows\system32\config\default

• Type exit to quit the Recovery Console. Your computer will restart.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with case windows_folder If it is a different place.

If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

batch regcopy1.txt

With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use the batch command, you do not have to manually type as many commands. Second part to perform the procedure described in this section, you must be logged on as an administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

1. Click Start, click shut down (or click turn off computer), click restart, and then click OK (or click restart).
2. Press the F8 key.

   On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

1. Start Windows Explorer.
2. On the Tools menu, click folder options.
3. Click the view tab.
4. Under hidden files and folders, select Show hidden folders and files, and then click to clear the Hide protected (recommended) operating system files check box.
5. When appears in the dialog box confirming that you want to display these files, click Yes .
6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

   Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

   Note You may receive the following error message:

   C:\System Volume Information is not accessible. Access is denied.

   If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

   309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
8. Open a folder that was created not at the present time. You may need to click Details on the view menu to see when these folders were created. There may be one or more folders starting with "RP x under this folder." Here are the restore points.
9. Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
   C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
10. Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
    • _REGISTRY_USER_. DEFAULT
    • _REGISTRY_MACHINE_SECURITY
    • _REGISTRY_MACHINE_SOFTWARE
    • _REGISTRY_MACHINE_SYSTEM
    • _REGISTRY_MACHINE_SAM
11. Rename the files in the C:\Windows\Tmp folder as follows:
    • Rename _REGISTRY_USER_. DEFAULT DEFAULT
    • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
    • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
    • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
    • Rename _REGISTRY_MACHINE_SAM to SAM

These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

Part three in the third part, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

1. Start the Recovery Console.
2. At the command prompt, type the following lines, pressing ENTER after you type each line:
   del c:\windows\system32\config\sam

   del c:\windows\system32\config\security

   del c:\windows\system32\config\software

   del c:\windows\system32\config\default

   del c:\windows\system32\config\system

   copy c:\windows\tmp\software c:\windows\system32\config\software

   copy c:\windows\tmp\system c:\windows\system32\config\system

copy c:\windows\tmp\sam c:\windows\system32\config\sam

Copy c:\windows\tmp\security c:\windows\system32\config\security

Copy c:\windows\tmp\default c:\windows\system32\config\default

Note Some of these command lines may be wrapped for readability.

• Type exit to quit the Recovery Console. Restart the computer.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with case windows_folder If it is a different place.

If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

regcopy2.txt batch

Fourth part

1. Click Startand then click all programs.
2. Click on Accessories, then System Tools.
3. Click System Restore, and then click restore to a previous RestorePoint.
Back to top

REFERENCES

For more information about using the Recovery Console, click the n in the following article...
For more information about using the Recovery Console, click the numbers below to view the articles in the Microsoft Knowledge Base:
307654 (http://support.microsoft.com/kb/307654/) how to install and use the Recovery Console in Windows XP
216417 (http://support.microsoft.com/kb/216417/) how to install the Windows Recovery Console
240831 (http://support.microsoft.com/kb/240831/) how to copy files from the recovery on removable media Console
314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console
For more information about system restore, click on the numbers below to view the articles in the Microsoft Knowledge Base:
306084 (http://support.microsoft.com/kb/306084/) how to restore the operating system to a previous state in Windows XP
261716 (http://support.microsoft.com/kb/261716/) System Restore removes files during a restore procedure
For more information about the three likely causes of registry corruption and how to isolate, click on the number below to view the article in the Microsoft Knowledge Base:
822705 (http://support.microsoft.com/kb/822705/) for advanced users registry troubleshooting steps
Back to top
• Microsoft Windows XP Home Edition
• Microsoft Windows XP Professional
• Microsoft Windows XP Tablet PC Edition
• Microsoft Windows XP Media Center Edition

If this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK

• delete mutiple files problem

  I can't remove the multilple files. My Shift and Control keys function normally but doesn't work when I try not and multiple delete. I can delete individually.

  Hello

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the disk check and verify if it helps:

  How to perform disk control errors in Windows XP

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

   

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists. To see how to do the SFC Scan click on the link below and follow the steps in the Kb article.

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

   

  Method 3:

   

  Also, try to create the new user account and check if the problem persists:

  How to create and configure user accounts in Windows XP

   

   

  I also suggest you to optimize Windows XP for better performance and check if that helps:

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• Files problems...

  Recently I tried to create a new folder under Vista 32 bit and was unable to name it. I can type the name I want, but when I enter the name goes to the "new folder". I ran the registry cleaning software made for Vista and cleaned all the invalid registry keys. I also scanned the HARD drive using the Microsoft web scanner. Nothing is fixing this. What's wrong???

  Even if you don't get this error message and it is not a shared network folder, the solution can still help solve your problem, because it is similar (can't rename the folder): http://support.microsoft.com/kb/934160.
  But it is probably a permissions problem (user/group permissions or ownership rights).  Here is some information that should help you.  Do the TWO parties - the part of the authorities AND the part of the property.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  P.S. I STRONGLY advised against running ANY registry cleaning software if you want to avoid your system crashing, it irremediably corrupts or infected with some type of malware.  There are NO registry cleaning software I can recommend (or someone here who has experience in the industry will recommend).  Most do almost nothing of the real value and some can be very dangerous.  Vista didn't need it - he did a great job on its own.  When perform you analyses using the advertised software it shows ALWAYS hundreds or thousands of errors that must be repaired if you download and purchase their software (or sometimes this happens even with freeware).  It's a scam.  They try to make you download the software to get money out of you or infect your system with malware of some sort.  If you decide to use anyway, do it at your own risk with this bet to keep in mind.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The initial launch of DW CC 2014, get following error: "cannot locate the resource file in the Configuration folder. This file is Spectialized to run Dreamweaver. Please reinstall the application. "This app has been updated through CC.

  I have to first remove the DW? With the help of PC Win 7.

  The error message: "Unable to locate the resource file in the Configuration folder", so it seems that something is missing. Could be a permission problem... I would suggest:

  1. go to a user admin account

  Connect using built in Administrator | Create the local admin account. 7, 8, Windows Vista

  Install or run Adobe applications in the new user account. Mac OS X

  2 remove the application DW CC 2014 by uninstalling or using the cleantool.

  https://helpx.Adobe.com/creative-cloud/help/install-apps.html#uninstall apps

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  3. manually delete the directories of config according to KB: (you need to of course search the CC 2014 folder instead of the older versions in the KB)

  Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6

  This step will ensure that also the configuration file will be regenerated on re installation!

  4 reinstall on the new admin account and test again. If works please go back to the old account and test again.

  Good luck!

• Configuration of the Airport Extreme problem and Vigor 120

  Hi all

  This is the case, I have vigor installation 120 in Bridge mode with my airport extreme with settings pppoe settings of my ISP of vpi/vci: 8/35 pppoe/llc adsl2 + login and password, when the force as a router configuration, there worked perfectly, but in Bridge mode has managed to establish a PPPoE to pc but when the connection with the airport no luck I got an invalid ip address and orange light flashing.

  I have the latest in airport and vigor firmware and I'm doing a powecycle reboot after each change.

  Here are the settings in effect 120

  

  

  Any help would be more than welcome

  It's sad to say THAT PPPOE on the Apple is not reliable.

  I have the same problem... I can't use routers Apple with PPPOE on my modem in bridge... regardless of the brand.

  PPPOE is a bunch of variations... PAP or CHAP for example... and the number of... repeated attempts time between repetitions.

  Apple offers zero... whether it's no control... they are all available right now to find out what newspapers or.

  I had to simply replace the Apple router with another router... any other router seems to work fine... It's just the Apple that failed on me...

  I tried with several different Apple routers using all the old firmware, at latest... all fail. So I guess it's less coherent.

• Satellite P200 - unexplained MIDI file problem message

  Satellite P200 - without any sound media playing I regularly get the pdf file following poster "If you have problems with playback MIDI files please perform following steps.»

  I have no problem with the sound, DVD, MP3 etc.
  No explanation and how can I stop it?

  I always put t understand when this message appears.
  Can you please be more detailed description of the problem?

• A60: screen freezes saying ATI2vag file problem

  l have a display driver problem and l don't know what to do. assistance is needed.

  I have a PC laptop toshiba A60 with an ATI mobility radeon 7000igp pilot and the screen freezes often calm saying problem of file ATI2vag.
  I uninstalled and then re-installed with the tools backup drive, the problem is still there. I went to the ATI site to try a set date and this would fail, as the laptop came with pre-installed drivers, could not find a.

  Installation got to ati display driver, then an INF error video driver not found message. It says go to toshiba for updates, that's what l collect, but toshiba, s display driver is the same version that already have an l there is no update.

  Can I try now. HELP PLEASE.

  Hello

  Usually, you should always use the graphics drivers Toshiba because other drivers from the manufacturer s are not designed for the use of the laptop. Graphics drivers from Toshiba are slightly different because they have a thermal protection.

  So if you are not able to find an update of the graphics driver for your laptop then I would recommend to check the different laptops that have the same graphics card and try to use this driver.

  Concerning

• Satellite L850-1HP not configure downloaded Windows Update files

  My laptop was having problems on the first day that first the CD-ROM not open, then the webcam and the microphone switch off forever and can not be turned on again never and finally, this summer, my computer laptop would not connect to any WIFI network at all, it will still fail.

  I went to the place where I bought it for support, they sent for repairs, a week later, I'll be back, it is restored back to factory settings, all seemed well, CD ROM functional... Webcam and microphone too.

  So I thought I would check around and start things tyding for my taste, and then I realize that I need to download updates from Windows Update, so I do it, on 100 + updates, I start to download, but they do not download until the 20th minute that it is stuck at 0% What seemed fishy to me, because then he just jumped up to 10% and progressed forward.

  After downloading the updates, or so he said she had, I restart the laptop in to get their working and configured properly.

  There can be no. After I clicked on restart, it began to close, saying it is to configure and to 20-30%, it restarts, and then he charged to the top of the screen, even saying that he configures updates, then he said that he failed and said it restore the data back to normal, that he never scare made.

  After about two hours of waiting so he could do nothing at all, I restart the PC, the same thing.

  Restart again but this time I restore things settings once more, takes me about 1 hour with a full erase of the data (of course the rest of the OS and toshiba apps too) all implemented naming stuff, and accept the terms and conditions, blah blah, operating system starts, I check everything and restart.

  After the reboot, I decide not to configure anything until I downloaded all the windows updates, so I do just that, BUT I get the same error again, sneaky - slow download of updates, restart and get the same message that it cannot configure updates and wait forever-long for the laptop to "restore" data back to normal which she didn't do, once again.

  I'm completely helpless as to what I should do, I restored factory once more but this time I'll just wait for some feedback or try to make everything I find on these forums it is useful.

  Help, please.

  Hello

  Satellite L850-1HP was pre-installed with Win 8 64 bit.
  You have problems to install the updates to Win 8?

  Generally, you will get an error message if an update has failed.
  Could you post the error message?

• HP Pavilion DM4: HP Pavilion DM4 missing files problem

  I have a laptop HP Pavilion DMf that I'm trying to make it work properly

  who has missing files

  After I connect to the computer as an admin user

  I get the following message

  API-ms-win-downlevel-user32-| 1 1 - 0.dll

  is missing on your computer

  When I cancel this message box I could

  get get a Firefox browser and browser Chrome to work

  and connect to Web sites

  but Internet Explore triggers the following message

  API-ms-win-downlevel-advapi32-| 1 1 - 0.dll

  is missing on your computer

  some of my applications such as

  Media Player, live mail and HP Security Assistant

  trigger the following error message

  API-ms-win-downlevel-ole32-| 1 1 - 0.dll

  is missing on your computer

  My infographic connects to my wifi internet connection

  I ran the file sfc.exe schecker propgram and when it ends

  it say found missing software

  I was able to open the cbs.log file it creates

  but I do not know how to interpret the results.

  Also I could use instructions on how to recover

  the missing files that it identifies.

  I'd appreciate any help that you can come on me

  to solve my problem

  Hey @wsigner ,

  You need to try a clean Windows installation. Here's help on how to do it.

  Thank you.

• Several files palette in a library/class file problems

  All developing a labview class, I wanted to put the default palette, so I added the relevant dir.mnu file to the class. Unfortunately, the class had a dir.mnu in her file. On the addition of the file, I received an error message on a dependency change * (which makes no sesne, how a palette file can have dependencies!). On the recording of the class and any attempt to reopen it, LabVIEW argues that it is corrupt. Inspect the .lvclass xml files reveals that when I added the new file paletee, LabVIEW actually just added a second reference to the file already in the project palette, he then considered a problem when it tries to load the class. This is clearly a bug on several levels:

  1. It should not possible for the user to induce LabVIEW to create files xml corrupted through such simple attempts to use the documented features.
  2. The underlying problem is that LabVIEW seems to use the classic search/link rules to load the library items, be they a vi (which must have a unique name) or another file (which might well be legitimately not unique).
  3. Almost impossible to rename a palette file without breaking the links palette this bug in particular is very annoying.

  I was able to reproduce the behavior described.

  This was reported to R & D (AUTO ID: 181638) for further investigations.

  Thanks for the comments!