Configuration of EMC Solutions Enabler SRM for CLARiiON
Just a quick, what services should be enabled for the EMC Solutions Enabler installed?
I selected a typical installation and exit the Sub attached screen, should I check the Symmetrix integration utilities, or none of the above?
Thank you
Craig.
Default values should be fine, never had to select additional check boxes in my installs.
See you soon
Lee Dilworth
Tags: VMware
Similar Questions
-
Hi all
I'm looking in the options available for implementation of the Site Recovery Manager with EMC Symmetrix storage.
We are looking for ways to use the Solutions Enabler to avoid the need to directly attach the MRS server to the storage group.
I can be this misunderstanding, but is it not possible to install the activator of solutions on an ESX host and use this host as a gateway to the table?
I imagine that if this is how things work then the Activator would install on the Service Console OS within ESX? Is something similar to happen with ESXi?
Thanks in advance for any guidance.
Dave
Although it was possible to use the ESX host, it is not at all achievable with ESXi. I personally found that by using a dedicated server to Solutions Enabler and the installation of the client on the server services SRM has been the most elegant implementation.
Tim Oudin
-
How to configure the router Linksys DD - WRT for WVC54GCA E4200
I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.
I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:
http://tzodns.com/support/tutorials/188
http://tzodns.com/support/tutorials/190
Hi Majekho,
Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).
In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at: -
Change of virtual machines managed by SRM for VR in an event of DR
Hello
I have a virtual machine that is being replicated using replication vSphere + I configured a recovery SRM for virtual machine plan is managed by SRM.
In a DR situation:
- To recover a virtual machine that is managed by VR everything I have to do is to connect to vCenter to your web site of DR via vSphere client, then click on recover.
- To recover a virtual machine that is managed by MRS. all you need is to get a full vsphere to your DR site that has the plugin SRM installed before you can retrieve customer.
My question:
Suffice it to say at an event of DR MRS on the DR site was dismantled (so I couldn't recover virtual machines managed by SRM) but I can connect to the Web from vSphere client and retrieve virtual machine managed by VR, is it possible to manually change the virtual machines managed by SRM, so they are managed by new RV?
See you soon
Hello
There are internal interface that allows you to do. Please contact VMware support team.
Go get the current "recovered by" value:
To reset the value "recovered by" RV:
Call the method after replacing ME with the GID... replication value and clear the value (empty string) for the recoveredBy property.
To retrieve the value, GID-... - look at the names of the replica files in target or check data warehouses the table GroupEntity in DB VRMS. To get prompt SQL embedded DB VRMS - use
/ opt/VMware/vpostgres/Current/bin/psql vrmsdb - U
and
\Q to quit smoking
Please note that the foregoing is not officially supported and may change with the different versions of the VR.
Kind regards
Martin
-
Enable CUDA for AMD Radeon HD 6970M
Hello
Could you help me please? Is there a solution to enable CUDA for AMD Radeon HD 6970 M?
Thank you
KM
CUDA is the property of nVidia. OpenCL can normally run on cards from AMD and nVidia. But for Adobe programs, which only applies to Macs. Windows users do not have the option of OpenCL with nVidia cards.
-
How to enable HTTPS for BPEL Process on soa suite 11 g and can we call HTTPS
How to enable HTTPS for BPEL Process on soa suite 11 g and can we call URL HTTPS of BPELOh, sorry it's different it's sign / encrypt the web service.
I talked about the activation of SSL for all of the following SOA. Although the process looks like him as OSB although I have not tried.
This link can help.
http://download.Oracle.com/docs/CD/E12839_01/Web.1111/b32511/configuring.htm
It is all configured in the Manager of the company once it is installed. Its is so distinct form SOA Suite, so developers need not worry about this.
see you soon
James -
How can I configure my Mozilla Thunderbird to me for new confirmed before leaving?
I used to use Microsoft outlook. In outlook, we use the button 'close' at the top right of a mail to close this letter.
In thunderbird, this 'x' is available on the top somewhere in the middle.To close a mail, I click on the upper right corner by mistake and the release of Thunderbird (which I didn't) by mistake.
How can I configure my Mozilla Thunderbird to me for new confirmed before leaving?
As far as I can see there is no easy way to do this. However, an easy option is to have the Thunderbird in the system tray on hitting the close instead of closing button. The add-on "Minimize on start and close" for Thunderbird accomplishes this mission and to close all what you need to do is right-click on the icon in the taskbar, and then click close to close actually it. I hope this helps.
-
HHey guy
I enabled notifications for VIP emails, notifications of wire on my iPhone. But, automatically receive nothing.
I put Fetch manually for my emails. Can I change the settings or how can I make it work? Help, please.
Thank you
SAL
Hey there Ram.
I see your message that you receive any notifications automatically when you search for new e-mail messages while using the option extract manually. The difference between go pick up and pushing the notifications and information/updates on day of account is definitely a balancing act. At one end, you want to save your iOS device's battery, on the other hand, you want to know what you should pay attention to. I had to find the best way to balance those myself, so here's my best information.
Push your data means that each time your information has been updated to include something new, a periodic inspection of the accounts on the device that uses the power of the battery. Fetch means that there is a certain amount of time that your accounts are audited with can help save your battery life. Pick up manually, you are not looking for information updates until this request has been activated as your Mail, Contacts, calendars and other app.
The drillthrough feature has other eligible delays causing your email accounts to check back more often. You can select a time in settings > Mail, Contacts, calendar > extract to one that fits your needs. Your other choice is all hours, every 30 minutes and every 15 minutes. More frequently your accounts are checked means a greater drain on your battery life. I recommend you to choose the longest period of time and see if you get your notifications as often as you want.
Happy emails for you!
-
Hello
I have a series of computers that run the mozilla firefox. For some reason, firefox handling cookies is disabled by default for everyone who uses a computer. I can activate on a per user basis, but it's tedious. Not to mention he's totally confusing to end users as to why some web sites do not work. Is there a way to enable cookies for all users on a computer without having to re-sysprep and copying to a new default profile for each of the computers? Something about: config, maybe?
You can use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify new values (default).
Put a local file - settings.js in the folder defaults\pref also the file prefs.js - channel where to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value pref(); // set pref, but allow changes in current session lockPref(); // lock pref, disallow changes
See:
-
How to enable java for my android mobile.
I get an error "enable java for your browser. How to do that as I am unable to see the tab preferences anywhere.
Oracle DOE not make the Java plug-in for Android due to the continuation of Oracle against Google, which of course is the developer of Android. Note that Java and JavaScript are two different things in the case where the message actually said JavaScript that must be activated.
-
Hi, I answered no to the question on the registration of password for a spesific site. I changed my mind and would like Firefox to save the password. How to re-enable password for a spesific site saver?
Check the list of exceptions to your Firefox password manager and check if your site is there or not?
-
Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!
Fanat_UKR wrote:
Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!
your phone must be connected to a power source to use Hey siri since you have an iphone 5. Most recent iphone don't need to be plugged into a power source.
-
My ventrilo was working fine two months ago, but now for some reason any gives me these errors, "unable to enable DirectSound for the selected device.
DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use. On my other computer samething but different error message that reads, "cannot open the input device. Another program, it may have already. RC = - 10"Event. worked fine on both computers. have updated and rolled back all the audio drivers, uninstalled event. and reinstalled. What continues?
I have finnally got the answer that it must be run as administater. For the Horde!
-
Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.
Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work. I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor
Hello
HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.
This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1
If you can't make it work, you must decide between a new card or another router.
Personally, if it's new and I could return it, I'd get a different router model. But YMMV
------------
My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Enable tracing for specific users
Hi all
DB version: 11 GR 2
We request that create connections from a user to db. Link any run with some work, some runing some sql statements.
We must enable trace for that user on the application of 'Action'
for example. When this application connects to sql execution statement trace activate.
I know that we can use the logon trigger and activate the trace.
example:
CREATE OR REPLACE TRIGGER USER_TRACE_TRG
AFTER LOGON ON DATABASE
BEGIN
IF USER = SCOTT
THEN
immediate ' alter events set "trace 10046 name context of session forever, level 12". "
END IF;
EXCEPTION
WHILE OTHERS THEN
NULL;
END;
/
but we have to USE SCOTT and ACTION = =...
How can we enable with dbms_monitor?
can anyone help.
> I want to track when the session is created for this user
A logon trigger is the simplest for this requirement.
You have changed your condition.
Hemant K Collette
Maybe you are looking for
-
I have an iMac late 2009, with OS X El Capitan 10.11.5, Safari 9.1.1. Recently, I tried to open something, and I said "Required Media Player." But in trying to download it, it says Power PC is no longer needed. How to work around this problem?
-
iPhone 6 closing down must do hard reset to return.
My iPhone 6 has been completely stop, and I have to do a hard reset to get it back. What happens with a full load, both on the phone and on the case. Any suggestions?
-
QNX. UI. Text.keyboardtype and returnkeytype cannot be found
I HAV this error when I import two of the above classes, and I updated my blackberry tablet sdk to the latest version, but always having this error. Any help?
-
I have a Canon MX892 printer/fax/scanner and a new HP laptop with Windows 7. It shows as Canon MX890 Fax in the peripheral area. When I try to print, it displays the fax dialog box and will not let me print. How to recognize as a printer?
-
Move a list of virtual machines to a different folder (blue)
Hello Experts,I have a situation where I have to change the location of the folder for couple of VMS, I tried to use script below, but after the import, it seems get-folder command fails to get the contents of the csv. I get the error message as null