configuration of r2 Windows 2012

Similar Questions

• TS140 install Windows 2012 on RAID 1

  Hello

  I intend to install a Windows Server 2012 on a TS140 using RAID 1 configuration.

  As I read in the manuals, the RAID is most often used with the CSM (compatibility Support Module), but as Windows 2012 supports UEFI, it could be used with the drivers.

  What is the recommended configurarion?

  In addition to the installation of the driver are the drawbacks in any configuration?

  Thanks in advance,

  Pablo Moleri

  I don't think that will give you all the advanced features.

• "Bcdedit-set {default} displayboot menu" does not-server windows 2012 R2

  Microsoft support cherish,

  I have windows server 2012 R2 running the Dell server 'PowerEdge R210 II', today found that the server suddenly unable to windows for lunch and when I tried to lunch the server it asks me to insert the CD of windows media and after that it stops popping to insert the support CD, and now it shows me an error "can not find script file c:\remindpopup2.vbs.

  I tried to access the windows safe mode and given that it is windows 2012 and after some googling, I realized that I need to activate the command line start menu since I can't access the windows.

  I insert the windows CD and using the option 'fix my PC' I managed to gain access to the command line so I tried to use the following command to activate the start menu

  bcdedit/set {bootmgr} displaybootmenu Yes

  but the operation did not succeed with the error below

  the boot configuration data store could not be opened.

  the volume of the file has changed on the outside so that the opened file is no longer valid.

  With kindness your advise how to solve this problem and please let me know if no need more details.

  Kind regards...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• HP Laserjet installation on Windows 2012 print server

  Hello Forums HP

  I try to add a Hp Laserjet P4515 on a Server Windows 2012 print and update its parameters to itself all 6 trays installed.

  I realized that on a Windows Server 2003 print using HP PCL 5 universal print drivers by using the Automatic Configuration under device settings option in the printer properties. However, following the same procedure on the server of 2012 option Update configuration is missing.

  I left the configuration of the printer automatically select the driver which is listed as HP LaserJet P4515 PCL6 on the name of the driver class and Micorsoft Point and print on the Advanced tab.

  Does anyone know how to get the driver to update the config?

  Regards,

  Cam

  I finally got this working. Remove the printer and starting from scratch.

  I have downlaoded 32-bit and 64-bit drivers PCL6 and extracts into a folder. Started the installation of the new printer manually and unchecked the box detect automatically the driver. Come in 64 bit location extracted folder and allow the driver to install manually. When installation is completed I went the printer properties/sharing tab and select additional drivers and checked the x 86 button. Then, said the browser in the 32-bit extracted folder.

• Implementation of IPSec Port Forwarding on a Windows 2012 with a LRT224 Server

  Hi all I hope someone can help me validate my troubleshooting. I'm deploying a Server Windows 2012 that will server as a server vpn for customers. In place is a LRT224 with 4 VLANS set up. I have enabled port forwarding for IPSec (UDP/500), L2TP (UDP/1701) and L2TP (UDP/4500) to go on the server.

  In my Initial test, I put the LRT224 on the same network as the client of my test and realized the Test Client (10 Windows) to try to connect to the WAN of the LRT224 interface. I get this message:

  

  Thinking it could be the configuration of the server, I then put the client system on the same vlan on the LRT224 server. When I tried to connect to it directly by using the IP address of the server as a destination, he succeeded.  It is leading me to believe that it is the LRT224.

  I confirmed that VPN passthrough is enabled.

  The firmware version is by: v1.0.5.03 (February 22, 2016 10:12:17)

  Currently, the firewall is disabled (I would activate once I'm working)

  If anyone has ideas or notice a fault in my tests, I would really appreciate the feedback.

  If additional information would be useful, please let me know what you want and I can work for it.

  Thanks to all in advance.

  FreeFallFour wrote:

  I then put the client system on the same vlan on the LRT224 server. When I tried to connect to it directly by using the IP address of the server as a destination, he succeeded.  It is leading me to believe that it is the LRT224.

  It does normally not as I KNOW because the VPN in an outside in the process. You should test the VPN connection outside the server's IP subnet.

  You have the server configuration that the DNS server in the router to DHCP with DNS Proxy is disabled?

  Are you doing load balancing Internet connection?

• Problem installing VMWare Workstation on a Server Windows 2012

  Hello

  I have problems when trying to install VMWare Workstation on a Server Windows 2012. Windows Server is Amazon EC2 environment and a generic image extended release.

  The problem is that the installtion process fails because of "Hyper-V" during installation, but after investigating the option "Remove roles and features" I can see that it is not installed.

  Is there any fixes for this issue?

  I enclose three screenshots for you pleasure.

  Regards, Ray...

  Hello Ray,

  Welcome to the VMware community forums.

  You run an EC2 instance that has just 615 MB memory installed?

  It's kind of a weird for a host, much too low for Amazon memory configuration, even be profitable.

  I think that your server is running UNDER Hyper-V, for example. It is probably a Virtual Machine.

  You can easily check that yourself by running the script from this site:

  How Hyper-V to: detect if you are inside a virtual machine

  If it's a Hyper-V virtual computer then I don't think you can install VMware Workstation on the virtual machine and run the nested clients.

  You could do the opposite (invited running hyper-V in a workstation virtualized on vSphere) but is not very fast.

  As you have no control over which platform virtualization Amazon use for their windows servers, I'm afraid you will have to go for a dedicated server instead of a virtual machine.

  Hope this helps,

  --

  Wil

• HP Jet 7: My hp stream 7 tab stucks in the configuration of the window has... (a picture of blue background with whi

  My hp stream 7 tab stucks in the configuration of the window has... (a picture of a blue background with white letters) its does not accept the entry while I also use an aotg with the mouse cable. So please help me its very urgent

  Try to hold the low volume button when the power and press the F11 key to enter the menu of system recovery.

• OfficeJet 6830 support for windows 2012

  If anyone can help with installation of the HP officejet pro 6830 drivers/software on Windows 2012.   The HP documentation says that 2012 Windows is supported, but here there are no drivers available for Windows 2012.  Windows 8.1 and 2008 drivers do not install in Windows 2012.  Any help is appreciated.

  @enruis

  Thank you for using the HP support forum. I sent you a private message. If you are unsure how to check your private messages please click here.
  Thank you
  Omar

• All printers disappear from windows 2012 r2 print management

  We used the print management in Windows 2012 r2 to deploy and manage printers, printers Nowdays, we do not see in print management. I read that the KB3170455 caused this problem but this patch it is important for the Security server. I think that the solution is to quickly remove this patch. Is there a solution for this problem?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• R2 black screen Windows 2012 After loging

  I am new to Microsoft windows server anyway especially r2 windows 2012, actually server was there for only the Ncomputing devices, so I have messy hair with it by installing AD and Hyper - V, after seeing these functionality affect my Ncomputing environment I just remove, it took a while to restart after restart of finishing and anyway I can't my Local account and I managed to to the field again with black screen and cursor only, I have trried to find ways through google but nothing exactly, someone with a help of there idea
  20:06

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Could not get the download KB2931358 for windows 2012 R2 standard x64bit

  Hi expert,

  I couldn't get the download for 64 bit window 2012 r2 std...

  This site looks like a download is no longer available for windows2012

  https://www.Microsoft.com/en-SG/Download/details.aspx?ID=42769

  It shows only windos 8.1 only for download... Please help me

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Driver HP Bluetooth Module compatible with Windows 2012 r2 for HP Touchsmart 610-1050y computer.

  Need compatible HP Bluetooth Module Driver with Windows 2012 r2 running on a HP Touchsmart 610-1050y computer.

  My HARD drive crashed a week go, bought a new and so far everything is good except for the wireless. I take classes of r2 Microsoft 2012 410, 411, 412, that's why I loaded 2012 r2 on this machine, but I can't find a driver that would allow the HP Bluetooth Module using r2 Windows Server 2012 &. HP looking for this driver, but not available, also found other sites that claim to have the drivers I need like a driveragent.com, but I pay 30 dollars for their services. Any help or suggestions are greatly appreciated and welcome.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Fix for Windows 2012

  Hello

  Is there a community or forum posting the list of fixes related to Active Directory and Windows 2012?

  Grateful if someone could provide the detaisl.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 2012 R2 (Hyper VM) does not start

  Hello

  Turn a Windows 2012 R2 Standard (Hyper V Virtual Machine) and pointed out that one cannot start up.

  When connecting to this virtual machine and I observe suite Manager:
  ==========================

  Windows Boot Manager

  Windows could not start...

  ....

  .....

  File:\Windows\system32\ntoskrnl.exe

  status: 0xc0000098

  ======================

  Turn off the virtual machine and start the vm and same message.

  Can advise on how to recover?
  Unfortunately, I do not have a backup available for this virtual machine image.

  Any urgent notice is greatly appreciated that what happens on my production server?

  Thank you

  RGS
  Alan

  Alan

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Downgrade Windows 2012 R2 OEM

  Hi all

  I want to downgrade my Windows 2012 R2 Standard Edition Windows 2012 Standard Edition (OEM).

  I have read the license agreement and follow the instructions on this page

  https://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/downgrade_rights.aspx

  I call and the operator told me that they don't downgrade Windows 2012 R2 by phone.

  But that is written at the end of the page above...

  Please can you help me?

  Best regards

  Jean

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum