TS140 install Windows 2012 on RAID 1

Similar Questions

• Cannot install windows 2012 on PER720xd

  Dear all:

  I can't install windows 2012 R720 xd, because the controller of lifecycle Watch not deploy 2012 on the list of the OS from windows even if I update worm 1.1.8.1. And I try to install windows 2012 directly, but it can not detect it's installation cd. I tested the cd that allows you to start on vmware with success, how can I do?

  Hi Vivek, this problem is solved after I change for external start DVD rom from before backward USB, it can start the OpenManage DVD. This isn't making sense, but it works, thanks for your help!

• Install windows 7 on Raid 0

  Hello

  I decided to create 3 3 - ssd raid 0 and use it as my only drive. I managed to configure raid in BIOS and RAID Manager, so everything should be set.

  However when I boot and try to install windows 7 on a disk I have problems.

  1. it does not list my RAID as a disk available to install on.

  2. when it asks for drivers he will accept nothing out of the disc of Windows 7.

  So! Do I need a second disk/usb with the top drivers recognize my RAID? If so what drivers?

  Data sheet:

  mobo: Crosshair V Formula-Z
  CPU: AMD Black Edition 8-core 8350 Vichera
  GPU: Sapphire R9 280 X double-x
  RAM: Corsair Vengeance Pro 16GB DDr3
  Storage: Mushkin Enhanced ECO ^ 2 240 GB * 3 in RAID 0
  OS: Windows 7 Premium

  I would like to know if anyone has need for more information.

  Oh boy...

  You must provide the Setup mass storage drivers, you can use a CD or a USB key for it, you see this is the first phase of installation, the disk selection step, click "Load Drivers.

  John

• A general question on installing Windows 7 and RAID configuration

  I have an OEM Windows XP machine. His HD system consists of two physical disks connected during a RAID 0 configuration. The RAID has been initially configured in the BIOS (and maybe an extra chip), and then there are the drivers included in the installer of the OS.

  My question is: if I install Windows 7 from scratch on this machine (i.e. not updated from XP) the installation process would allow me to configure the RAID? Has its own generic drivers for RAID configurations?

  You will appreciate a response from a really knowledgeable person.

  See the following topics:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Click on load a driver

  Point to a USB key where you have stored drivers

• Error when installing windows server 2012 R2

  Hi all, I tried to install windows 2012 r2 server using a usb key. Everything goes normally, but once installation is complete, I get an error "failed to connect wire". Please. help me guys

  Thank you!

  Please post your query to:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Server issues are better addressed there. Select a category more appropriate from the left.

• How to uninstall essentials windows 2012 my Windows 7

  A few days ago I installed windows 2012 essentials, but it did not work. When I tried to re - install a massage appeared "you have last installed program." I opened uninstaller to uninstall the program but I do not see windows essential here. How to solve the problem?

  Try to do a system restore before you install:

  http://notebooks.com/2011/05/12/how-to-do-a-system-restore-in-Windows-7-or-Windows-Vista/

• The question whether to install Wins 2012 R2 before installing VMware vSphere Hypervisor 5.5?

  I'm new with VMware.  I have a DELL T420 server without an operating system in it.  I have a question, this first step, I need to install Windows 2012 R2 Datacenter to my server DELL T420, then the next step I will download the upgrade to VMware vsphere Hypervisor 5.5 2, is that correct?   I thank in advance for your advice.

  1. you must first download ESXi (hypervisor) and install it on your server.

  : Refer:vSphere 5.5 - How to install and configure VMware ESXi 5.5 - YouTube

  2. once the ESXi installation is successful, you can create a VM and then install windows 2012 R2 in this virtual machine as GOS.

  See:How to create a VM on a VMWare ESXi host using a VSphere Client - YouTube

  Let me know if you need help

• No sound after installing windows 10 MBP 2012

  Hello world

  Here's what I did.

  I have MBP 2012 with El Capitan on it.

  I installed windows on this 10. Here are the steps I followed.

  1. Plist file modified to allow the creation of iso windows 10 on USB for my MBP (PreUSBBoot USBBoot and 2 other usual changes)
  2. ISO file 10 Windows installed
  3. Make a key USB bootable but Bootcamp with drivers
  4. Use disk utility to partition the drive for windows (reason - because it gives error while installing windows, windows MBR EFI only on device TPG error)
  5. Restarted my MBP used and selected EFI boot option key (as when installing windows in Bootcamp, it gave an error saying no device found startup)
  6. Installed Windows and driver loaded by installing bootcamp
  7. Everything works fine but the sound

  Tried, but failed

  1. Clean install of windows if partition bootcamp (error - no found boot device)
  2. Boot EFI (error - error EFI GPT MBR, windows can be installed only on TPG error)
  3. Tried the update of drivers for the sound. However, did not

  Please help me with the steps to solve this problem. In addition, windows is not activated is there any way through which I can still get windows 10 free.

  Change the Info.plist file is incorrect. Your MBP 2012 takes in charge the two, USB and DVD facilities. Please use BCA and remove the current installation. Installation of Windows using boot EFI on a preUEFI machine will cause more problems.

• Install windows on mac pro (early 2008) in other SSDS with RAID card

  Guys, good evening to all the same time.

  I get out of this crazy short, I ask humbly help.

  I explain my problem:

  I have a Mac Pro (early 2008), with RAID CARD MEDIA

  He does not then I "gave" to my mother who must use windows for work.

  I'm out all 4 disks in RAID installed and mounted 2 - SSD OCZ Agility 256 GB.

  one of them is installed OSX Yosemite. on the other hand, I want to install WINDOWS.

  and here the problems begin:

  When I insert the win8.1 to proceed installation standard dvd (EFI not talked since the beginning of 2008), I get, when I have to decide on which disk to install and format windows, does not reveal the installed drives

  After 2 days of tweaking, I was able to understand that this is a problem due to the RAID card installed, I also read that you just remove it and connect the SSD in one of the two doors empty ODDsata (and not in the 4 planned the raid card slots)

  but still does not see the attached HDD / SSD, so keep trying and I think it's a driver problem and I need to install the AHCI driver, now, I'm pretty Nerd, but I still can't get.

  Someone could want explain step by step what I need to do to install this * win on MacPro 8.1 designed for RAID card?

  Thank you so much in advance.

  A welcome message

  Ruggero

  If you remove the card RAID Apple on the Mac, you MUST connect the iPass cable on its location on the motherboard, or all four bays are unusable:

  

  .

• Cannot install Windows on MacBook mid 2012 El Capitan 10

  I struggled for a few days to the new installation of Windows 10 on my MacBook Air mid 2012, 13 ". I just upgraded to El Capitan, but my bootcamp still shows the version 5.0.4 (473) when I go to install Windows 10 via USB bootable 64 bit, bootcamp opens with "older versions of Windows are not supported. Please use a Flash DRIVE or a Dvd that contains Windows 7 or later. "I don't know how update bootcamp separately, because the only updated to bootcamp 6 can I download is a .exe, which does not work on my Mac. Is there a way to get around this? Am I missing something? I also saw on other forums where there is a menu actions in bootcamp to download windows drivers, but my bootcamp is not a drop Action. The usb key that I use is a Samsung 32 g (fat32) 3.0 flash drive. Help, please. Thanks for your time :)

  1 is it possible have two installations of Mac OS X or your upgrade is not yet complete. Please check the about this Mac and confirm.

  2 has been upgraded to El Capitan made using the App Store?

  3. you have more than one boot disk for your Mac?

  4. you can always re - run the upgrade of El Capitan, which will be re-install/update the missing files.

  5. What is the name of the .exe file that you can download? What is the source?

  6. If possible, use a USB2 flash drive. USB3 drives can cause problems.

• Windows 7 takes 15 min to start after installing Labview 2012

  Hello

  I need help on this, is this a bug?

  The problem is that on my laptop after installing Labview 2012, it takes about 15 minutes to start, this happens every time a restart or start my laptop.

  At first I thought something with my laptop, but then my colleague also installed Labview 2012 on his laptop and has exactly the same problem, the difference is that his new laptop and is running windows 7 Professional 64-bit, mine is older and is currently running windows 7 32-bit professional.

  I tried to disable the services NOR, but has not solved the problem, but when I disable all windows services that start at startup, the startup is fast.

  Also note that I had Labview 2011 installed before and I didn't have this problem before.

  Tried also to find something in the registry, but nothing.

  Any who have this problem, or a solution to this?

  Thanks in advance

  This problem seems to be resolved, but then he come back again a few days later

  I did many tests in my laptop and found it to be in the "Service of Network Store Interface" service (INS). Disabling this service, you have your problem solved, but there is another problem, you lose the network.
  This happens because the "DHCP Client" service depends on the national statistical institutes.

  Also, this issue seems to occur only when the PC is in a domain and I'm in a windows server (Windows SBS2008) domain.

  Then I found that if you set manual this services which depend on national institutes of statistics (DHCP Client, DNS Client, IP Helper, network connections, local awareness network) and also put INS manual
  You must also disable the "Workstation" service that also depends on national institutes of statistics (why turn off? Because there are 3 services that depend on the workstation service, they will require to start, and then it will force NSIS to start, then long boot, if you really need of the dependent services on workstation, do the same as for them)
  Not also need uncheck this services in msconfig window if they are checked, and then the PC will boot normally without a network.

  When you start, you should go to services and start the DHCP Client for the network (and the other if you really need)
  This will force also NSIS to start and other services that depend on the national statistical institutes.
  The first time the PC restarts, you may need to reset these services to manual in the services window, I had to do, and then in sebsequent boots, they have been already set to manual
  If you leave right on the dependent services in automatic or automatic (delayed start) it will force NSIS to run and start time will go to + - 15 min

  Because you must manually start "DHCP Client" for the network, here's a solution to do it automatically after have connected you:
  1 - Go to control panel, and then open administrative tools
  Task 2-open Scheduller
  3. on the right click "Creat fundamental task.
  4. in the first window give a name ("DHCP" for example) and press next
  5 - Click on "When I Logon" and press next
  6 - click on "Start a program", and then press next
  7. in the "program/script" insert: net
  8. in the "Arguments" insert: start "DHCP Client".
  9 - Press 'Finish' and you're done

• If we have 2012 window microsoft license server can then we able to install Windows server 2008

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• We license from microsoft windows server 2012 and I want to install Windows server 2008. Is this possible?

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Cannot install Windows server 2012

  Cannot install Windows server 2012. Whenever I get * error

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows Server 2012 0 x 3701 - when you try to install Windows Backup

  Hello:

  Thanks in advance for any help you can provide.

  Windows 2012 - build 9200 - when I try to install Windows Server Backup - I get the error "the installer has encountered an error - 0 x 3701.»  The referenced assembly is not found.

  Outside the GUI installation, I tried the command line "ocsetup WindowsServerBackup" - I get the same error.

  Any help would be appreciated.

  Rafel

  You would be better served in the Technet/developer forums.  As you have no doubt noticed when choosing your category as the other/unknown - it is a final consumer - not a business oriented one oriented forum.  :-)