Configuration of SAP in D1IM

Similar Questions

• Synchronization Editor: configuration of a MSSQL connector for 7.0.2 update operation

  Hi all

  I use Sync Editor to configure a connection between D1IM and MSSQL database, up to now, I Don t have a problem with Insert and Delete operations. I want to create, disable or modify SQL users.

  My problem is with the update operation. Updates, I would like to update password for users of SQL.

  My project is to use the c# scripting language. In my code, I am using the following command:

  SQL. AppendFormat (store. Replace("ALTER LOGIN [%name%] with password = '%password%'", true));

  I have already configured:

  -Mappings, workflows and start-up configuration

  If I change the password for a specific user in D1IM, the update process is launched and running the workflow for the update of SQL, but the process stops in case of error.

  After going through the papers, he complains: "the unknown variable NAME.

  name is a valid attribute in my SQL table and also is defined correctly in the mappings associated with this workflow.

  Purpose, by using the same user can test said name is UserA and password = pass12 and name change will wear and password = 12pass

  Works well, the detected change workflow in the name attribute, which passed to the c# script. The process ends ok and the password has been updated correctly. Please note that I does not change the name of the user in the database, because my order only update the password for this user.

  My question is: How can I force to pass as many variables I need c# script? not only those who have been updated

  Any idea? AM I missing something in my configuration?

  Thanks in advance.

  Osvaldo

  Hello Osvaldo,

  the store you use contains only the changed values. This is the reason why your replace lance the error message.

  That's why you normally use something like the following to avoid the error:

  If (store. Contains ('Name'))

  {

  ...

  }

  But as you have already understood, that would not help in your case.

  You should be able to use the following code to access the NAME property even if it has not changed, assuming that your name is always set to something.

  data. SystemObject.GetValue ("NAME"). ToString()

  Then, your code would look like this:

  If (store. Contains ("password"))

  {

  SQL. AppendFormat ("{0} ALTER LOGIN WITH PASSWORD = '{1}'", data.) SystemObject.GetValue ("NAME"). ToString(), store. GetValue('PASSWORD', ' '));

  }

  HtH

• Targets for targets MySAP:No configured for this card.

  Hi all
  
  I use a 11g SOA server and that you have configured the SAP map. I am able to connect to the SAP system and browse the IDOC and BAPI from the Explorer of the Application successfully. But my BPEL process fails to run everything by trying to connect to SAP. Same mistake is visible from the iwafjca page.
  
  Targets for MySAP
  No target set for this card.
  
  iwafjca00.log file shows entered below:
  
  BEST IWAFManagedConnectionFactory com.ibi.afjca.cci.IWAFInteraction execIWAE (277) IWAFInteraction.execIWAE () is called with string:
  < GETTARGETINFO >
  MySAP < target > < / target >
  < / GETTARGETINFO >
  
  BEST IWAFManagedConnectionFactory com.iwaysoftware.af.container.ae.AETargetMessage parseGETTARGETINFO (152) GETTARGETINFO: target is "MySAP.
  BEST IWAFManagedConnectionFactory com.ibi.afjca.cci.IWAFInteraction execIWAE (280) IWAFInteraction.execIWAE () return the document:
  < GETTARGETINFOResponse / >
  
  The entry in the entry below ra.xml file shows:
  
  <>config-property
  < name-property-config > IWayHome < / config-property-name >
  java.lang.String < config-property-type > < / config-property-type >
  < config-property-value > / opt/apps/Oracle/Oracle_SOA1/soa/thirdparty/ApplicationAdapters < / config-property-value >
  < / config-property >
  <>config-property
  < name-property-config > IWayConfig < / config-property-name >
  java.lang.String < config-property-type > < / config-property-type >
  XXXX < config-property-value > < / config-property-value >
  < / config-property >
  
  iwaf_jca1500.log
  INFO IWAFManagedConnectionFactory com.iwaysoftware.afjca15.inflow.EndpointConsumer < init > (47) > - EndPointConsumer()
  SERIOUS IWAFManagedConnectionFactory com.iwaysoftware.afjca15.AbstractResourceAdapter endpointActivation (194) an Exception was caught all by enabling endpoint
  java.lang.IllegalArgumentException: channel not available for the card "MySAP" "SalesOrder_Channel."
  at com.iwaysoftware.af.container.ChannelManager.checkConfig(ChannelManager.java:421)
  ...
  ...
  
  Pointers...
  
  Thank you
  Laros
  
  Published by: subsahu on Sep 2, 2010 23:53

  In your config, IWAY_HOME, YourConfigName, y configuration folder there several files like repository.xml1, repository.xml2, etc., in addition to the repository? Similarly you see several ste_repository files?

  In this case, you could have done some CRUD operations when the iwafjca.rar is deployed and running. Whenever you do CRUD operations in iwae, make sure that the iwafjca.rar is not deployed or in Active mode in particular when you use deposit files.

  Thank you
  Maury

• S2S VPN

  We have a VPN S2S configuration for SAP/WMS system at the facilities, which includes the phone VOIP Cisco who connect through Vonage. There are bad quality call in this configuration, it is possible to exclude VOIP VPN traffic. If we plugin a phone directly on the Wan (service provider router), the call quality is much better.

  My other suggestion is to run new drops for all VOIP phones. I can achieve the same thing by routing. They use ASA 5505 routers.

  Thank you

  I hope you have your VOIP on a different subnet than your client computers.  If this is the case, you simply delete this subnet of the ACL crypto, VOIP traffic will be is more encrypted.

  --

  Please do not forget to select a correct answer and rate useful posts

• IDS MC v1.1.1 / sensor v4.0 (2) S42 - deployment Config fails

  Hello

  I upgraded the version 1.1.1 IDS MC and a sensor of 4235 version 2.0000 S42.

  I'm now trying to deploy a new configuration of the sensor through the MC and receive notification of failure of work by e-mail. Configuration changes appear to be correct in the IDS MC interface, but when I look at the sensor directly (by Bishop device ID), it seems that the configuration has not been updated (as indicated in the notification of failure of e-mail).

  I didn't chance again to fetch the log files again. Not sure if they are easily accessible on the new architecture of the sensor.

  Email error text:

  .. .deployment begins

  generate configuration: success

  deployment of configuration: sensor - sap.OrganizationName: the configuration files of the sensor deployment error - command not valid CLI: SigComment «»

  ^

  Invalid entry % detected at ' ^ "marker"

  Errors encountered during deployment of the device

  Deployment failed with 0 attempts remaining

  Deployment job failed...

  If anyone has any ideas or suggestions, I would be very happy.

  Kind regards

  Chad Giulini

  Please check if your MC has Service Pack 2 for i.e S42 2.0000 S42. If this isn't the case, update and then deploy the new attempt, after you remove the MC sensor and add it again.

• FDM adapter FTP

  Hi all
  
  I need to configure the SAP-END-A adapter to connect the FDM and SAP systems.
  
  Read the documentation for this card, I saw that it is necessary to configure a FTP server. This server is suitable for the SAP server or must in Server FDM?
  
  If it must be Server FDM, does anyone know if Consultants Oracle should install when they came to install FDM, HFM and adapter?
  
  Thank you and best regards.
  
  Published by: 807697 on February 8, 2011 10:24

  Hello

  No matter where the FTP server is in. The clearly documented requires just need her.
  If you currently have in the House and then, you can exploit it. If you do not have one you will need to build a.

  Thank you

• How automatically click Add button to form child process?

  During automatic configuration of SAP USA resources defined using the access policy, how I automatically, click the 'Add' button to add the pre-filled role and the system?
  Automatic backup is already checked in the provision process process definition.
  
  Thank you!

  As Kevin said, take-off these before and just pop let manipulate them the access policy. If you missed the system and their role in the access policy, you need not handle them at all in the pop tab front of the form designer.

• D1IM SMTP server configuration

  Hi all

  What is needed to configure the SMTP mail server to send workflow work?

  I want to try to use simple smtp4dev.

  Thanks for any help,

  John

  Did you follow the instructions here: http://documents.software.dell.com/identity-manager/7.0.1/configuration-guide/basic-system-configuration-data/setting-up-the-mail-notification-system?

• Try to configure the scan to the network folder, name of user and password is incorrect about JO 8600 N911n

  Hello - I have an Officejet 8600 N911n, product number CN577A. My OS is 64-bit, Win8

  My error message is either your user name or password is incorrect, please go back and correct your user name or password.

  No changes were made because this system has a few months other than downloads.

  I tried using the username provided by the scan to network folder setup with the IPL used for the HP forum and support. Also, I deleted the user name provided by the scan to network configuration folder and created a new pw. They have also objected. What user name and pw should be used?

  Hi Wardell1,

  I appreciate that you try to configure the scan to network folder.

  Where do you get this error message?

  Do you get this error message when you try to access SAP of the printer?

  You get this message on the printer?

• Sapera LT used with CVI

  Is that what someone has successfully used vision of DALSA, Sapera LT, with CVI library?

  Sapera LT supposedly has a C language interface.

  I have this poster in the forum of machine vision, but he seems to be more a SW problem (if, indeed, there are problems) a matter of HW.

  In principle, any standard interface of C (C89) should work with CVI I think... If it's for a framegrabber DALSA, or anything else.

  I was just curious if anyone had tried this specific thing, and if so, how it worked.

  Thank you

  Menchar-

  It turns out that you can use Sapera LT with CVI 2009.  You use the api 'base' which is an interface in ANSI C with the export header file and import for the DLL library is involved.  During compilation, I found 6 #defines which were redefined to somehow - the limits they were constant max on the different types of integers.    It seemed the stuff of limits.h, but it wasn't - I never figure out how or where he defined twice, so I just #undef had these just before the place where was held the redefinition and the problem disappeared.

  I was unable to use the framegrabber as a "camera" (peripheral), I used as a 'framegrabber"and loaded separately from the configuration files CCA and .cvi instead of a camera (.ccf) configuration file.  I have hooked up to a simulator CameraLink and grabbed a focus, then he wrote on the disk.  A close inspection of the data showed that it was seizing everything is OK.

  I used the 1.5 LT Sapera 7.0.0 and X 64 driver version.

  So I feel pretty good about this so far.

  Menchar

• Configuration without wire - HP Laserjet P1100w with Mac OS 10.7.5

  Ok

  I have the most recent updates of software through my Mac. I am connected via USB but unable to connect via Wifi.

  What is going on?

  Hi @rkcampbell,

  By your post, I see that you cannot set up the printer on the wireless network. I can help you.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  (hold down the x key and when the printer makes a noise to let go of taken)

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 6500)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  Check your network encryption type.

  Go, go to the Apple/system preferences/network/click on the button advanced/double click on the name of the network. (watch the WEP or WPA)

  Check the network password.
  In the Apple menu, click on Go, selection of applications, utilities, Keychain Access, double-click the name of the network,
  Check the show the password box, type your Mac password to see.  (some networks have a password shortcut configuration)

  And then double-click the P1102w printers & scanners.

  Open the utility.

  Click Printer Setup.

  Click Config to HTML.

  This should open the Web built-in to the printer server.

  Click the network tab.
  Click on wireless in the list on the left.
  Under Communication Mode, click Infrastructure.

  Select your network SSID from the list of available network names (SSID), then click on the< button="" so="" the="" network="" name="" moves="" over="" to="" other="">
  In the Safe Mode pop-up menu, under authentication, click WEP, WPA/WPA2 or open. Your selection depends on which wireless security protocol using your network.

  Make sure that you select hexadecimal or alpha according to your password. (very important)

  Apply the settings.

  In the confirmation box (changes have been registered), click OK.

  You should get a solid blue light on the printer shortly.

  All we have to do is remove the USB driver and add the network driver.

  Click on the Apple.
  Click on System Preferences.

  Click the Printers & Scanners.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello P1102w)

  Test the printer.

  If you have problems with the opening of HTML configuration, then perform the following steps:

  Close all applications.

  In the Apple menu, click on Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS / config HTML, click on the network tab, click on wireless on the left and fill out your information. (Make sure infrastructure is selected) Apply the settings.

  Then, unplug the USB cable and remove the USB driver and add the network printer. Make sure that this shows that the name of the printer.

  Test the printer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• OSX Maverics problem configure Deskjet 3055 A

  After performing an installation of os x Mavericks to install the latest version of the printer software HP Deskjet 3055 A (a 3050-Deskjet - J611_v12.23.0) complete the installation process crash.

  The printer is in system preferences and the Apple software update makes same corectly print correctly, the only thing the software does not install everything and I don't have the utility device app and I can't set up the WIFI printer.

  Excuse my bad English. concerning

  Hi manelolesa,

  Here is some information on software for the Mavericks.

  I can help you put the printer on your network wireless software. I use this method for iPads, iPhones and other devices that have no software.

  1. Restore default network settings on the printer by pressing the wireless button, by going to settings and then restore the default settings. The wireless button should start then flashes, this means that it is now in autowireless mode.
  2. To connect to the network that broadcasts the printer. It is usually HP-setup-3050 has and then a part of the MAC address. Always wireless light will blink on the printer at this stage, which is normal since it is not a real ad-hoc connection.
  3. Load up the built-in webserver (EWS) in the browser of your mobile device. The default IP for autowireless is 192.168.223.1.
  4. Go to the tab network along the top of the SAP.
  5. Click Setup wireless along the left side Assistant to start to set up the printer.

  

  You have now completed the configuration of wireless network, follow the next 3 steps to start printing.

  1. Blue wireless light will be solid, put the Mac on your network.
  2. Add the printer to the system Prefrences.
  3. Print

  I hope this helps.

• P1102w offline and can't find the html for OS x 10.9 configuration utility

  I installed the 1102 on my network, it was printing fine... it off for a few days. Now when I turn it on, the light blinks blue network, when I try and print it says 'the printer is not connected. If I look in system preferences, the printer shows a green light next to it.

  But I have no idea how to get to the online tool that allowed me to configure network settings and see if they have changed. There is no option on any screen taking me there. When I click on "Options and supplies" there is no button to take me to the HP configuration page, and I don't see any software on my computer to allow me to set it up.

  I just put a WPA password on the network, and I know what the question perhaps, but I still don't see how to get to the place where I set up the printer (was it a URL.. .but where he is hiding?)

  Hi @laurad1 ,

  By your post, I see that you cannot set up the printer again on the 10.9. I can help you today.

  Since you have changed the WPA password on the network, you will need to restore the default settings of the printer and set it up again on the network.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Restore the settings of the default printer wireless.

  1. turn off the product.
  2. hold the wireless button and the Cancel button and then turn on the product.
  3 press and hold the buttons until the printer stops making noise, then release the buttons.

  Print a Page of Configuration to ensure that IPv4 and SSID are deleted from the old settings.

  Print a Configuration Page.

  Remove the printer in printers and Scanners. Plug the USB cable from the printer to the Mac, and add the printer again. Make sure that it shows just the name of the printer. LaserJet P1102w. You may need to run the Apple updates.

  Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

  LaserJet P1102w.

  You can follow the steps rather than watch the video if you want.

  Then go to the Apple, system preferences, printers and Scanners.

  Highlight the Laserjet on the left side of the window.

  Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

  The integrated for the printer Web server opens.

  Click on the network tab, select Wireless on the left side.

  Fill in the information for your network. Make sure that the infrastructure is selected. Status: Make sure that you select enabled.

  Apply the settings.

  Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear)

  Remove the USB printer in the list of printers and Scanners window.

  Disconnect the USB cable and try and print.

  If you need help, let me know.

  Good day!
  Thank you.

• Import of data Exchange in D1IM

  Hello Experts,

  I try to import data to Exchange 2010 in D1IM, using the initial synchronization in synchronization Editor (v. 7.0.1) workflow, it is a first time data import from Exchange into D1IM. And we have seen the error message below, has anyone seen this error message before or knows what "isn't in the transaction" means? We have also received the same error if we try to simulate a report only.

  "VI. Projector.JobComponent.ProjectorComponent - 61d441cc-8d8e-4bcd-9aab-3fd0fdf2edba: errors occurred.

      [2134003] Error executing a full projection!
  

      [1777018] Error executing workflow (Initial Synchronization) of synchronization project (Exchange 2010 "Domain" (all recipients)).
  

      [1777124] Error executing projection step (MailboxDatabase) of projection configuration (Initial Synchronization (Initial Synchronization)).
  

      [1777219] Error executing projection step (MailboxDatabase)!
  

      [1777004] Method (Insert object (Insert)) could not be executed successfully.
  

      [System.Exception] Object ( - BCSMAIL2) is not in transaction!"
  
  BCSMAIL2 is one of the servers
  
  Thanks.
  

  Hello

  It would be great if you are able to view the log file full of the StdioProcessor execution of the full synchronization where the error occurs.

  For debugging messages, please set the globallog.config on the Service of the work, execution of synchronization complete, included messages of debug logging NLog.

  To do that change the minlevel 'Debug' as shown in the extract from the globallog.config

  ...

  
    

  ...

  You can find the log file in the path

  Identity %localappdata\Dell\One Manager\StdioProcessors

  Do not forget to log back to the normal level of information after you have created the log file for the full synchronization.

• Can I configure Cisco (AIR-CAP1602I-T-K9) 1602i offline?

  Hi everyone, please, I need help here.

  I bought 3 Cisco (AIR-CAP1602I-T-K9) 1602i but I did not buy a controller. How can I configure then offline?

  I saw in other forums, I need to change the IOS software to a stand-alone software. They suggested the ap1g2-k9w7 - tar.152 - 4.JA1.tar. I would like to know if this is the right software and if there is no problem with the license if I download and use it.

  Explanation of the differences between AIR-CAP-1602i-x-K9 e AIR-SAP-1602i-x-K9

  http://community.Spiceworks.com/topic/448208-Cisco-Aironet-1602i-questions-issues

  How to convert standalone IOS

  http://www.experts-exchange.com/Networking/Wireless/Q_28245190.html

  Download IOS:

  http://software.Cisco.com/download/release.html?mdfid=284366503&softwareid=280775090&release=15.2.4-JA1&flowid=37523

  Thank you.

  Wesley

  Hello

  Yes, you must pass in stand-alone mode. Yes, this is the right software and you will not face any problem regarding the license.

  But to download the standalone AP image of cisco, you need a CCO (Cisco connection) and the valid service contract.

  Here is the final image: can download here

  http://software.Cisco.com/download/release.html?mdfid=284366503&flowid=3...

  How to covert to lAP for standalone:

  http://www.YouTube.com/watch?v=QQ_NuxdRhQ4

  http://rscciew.WordPress.com/2014/05/07/access-point-conversion-lap-to-a...

  Concerning

  Remember messages useful rates