PC connected to the airport but no internet

Similar Questions

• Devices to connect to the airport, but not to the Internet

  Hi all; Here's my situation:

  I just bought a new Airport Extreme to replace my old router (Linksys). In our House, we have two iPhones 6, as well as the iPad, Apple TV and MacBook Pro that were all bought again this year. All these things were able to connect to the internet using our old wireless router.

  As I have configured and installed at the airport, various devices have been able to connect without being able to connect to the internet (i.e. AirPort Utility, the airport connection is a green dot, while the actual internet connection is an orange): first it was the MacBook having this problem while the phones and the iPad have been completely connected. After I simply rebooted everything several times - i.e. the modem, router, and MacBook - I finally got the MacBook fully connected (without really changing all the settings, which are all entered correctly). Now, however, it is the two iPhones that will connect the airport but not actually in the internet.

  Any ideas? I must say, these strange little problems idiopathic who seem to always pop up with Apple products are starting to really bother me... I never got my MacBook to connect to the Apple TV via AirPlay.

  Any time you change the material or providers of Internet services, networking, it's always a good idea to perform a complete recycling of your network equipment power. Check out the following Tip of an airport users for more details on how to do it. Please post back your results.

• Connect to the router but no internet.

  I use windows xp and netgear wireless router.till yesterday I browse the internet.from today morning, I'm not in a position to communicate the internet.but it will connect to the linksys router not internet.i can ping default gateway.but, that I can't browse the firewall disabled net.i. What is the problem?

  Hello

  1. what exactly happens when you try to connect to the Internet?

  2. you get any error message?

  I suggest you to follow the steps from the link below and check if it helps.

  Method 1 : in the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Try to run fix it from the link below:

  http://support.Microsoft.com/kb/811259

  Hope this information is useful.

• Connection to the local but no Internet (CABLE)

  I am currently using a cable connection to connect to the internet. Yesterday after uninstalling ZoneAlarm and SuperAnti Spyware my computer connect to the internet.  The box works properly because my phone line crosses and it works. Usually, if there is a problem with the actual adapter (box), that the phone will not work. I have reset the box many times, turned off for 30 minutes and reconnected. All the indicators show that the adapter is connected and functional. But my internet is not working.

  I also have:

  1. Tried ipconfig/release / renew restarted.  It says media disconnected however the link blinks on my cable adapter. It doesn't have an IP address. "Media State...: media disconnected > connection - specific suffix DNS.:" He also says disabled BIOS.
  2. I also tried EasyTether as an alternate. The connection is done however I can't access the internet.
  3. I've updated all the drivers of network, they seem to work correctly, there is not! or X (yellow or red) beside him. Ipv4 and the IPv 6 are verified.
  4. I tried disabling my firewall.
  5. Fact that I clicked on lan settings-it says 'autodetect' and this proxy server box was NOT checked

  Nothing seems to work I'm about to throw the computer out the window. Help, please!

  Hello

  Try this process.

  http://www.ezlan.NET/clean.html#refreshnet

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• WRTG54S to connect to the network, but not internet

  I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell Vista), he was sitting in a box for about 6 months and now that I have a new (Sony running 7) I can connect to my network, but not internet. I have updated the firmware of 7.6 to 7.8 without change. I have tried no security, wep and wap without change. Also, I cloned the MAC, once again no change. Windows cannot detect all problems, and when I try to activate the router to connect to the internet it always says connection failed. I can connect directly connected to the modem but not when connected to the router or wireless. Any ideas? Thank you

  Problem solved. I had to go to a Motorola SurfBoard 4100 to a 5100. Thanks anyway

• computer is connected to the airport, but nothing else does

  My time capsule airport is plugged in and the light is green.  My iMac is connected to the network via wifi without problem, but nothing else will connect.  My iPhone and apple TV to see the network to connect to, but when I select keep just try and custom actually connect.

  We just moved and the internet was created just to our new home, but nothing has changed.

  What is the number and model of your modem?

  When you set up the new Internet service, you you connected your iMac directly the modem?  If you did, it's probably the problem.

  What operating system runs the iMac?  If you are not sure, click on the Apple icon in the upper left corner of the screen and click on in respect of this Mac, then poster is back with Version of OS X number that you see there.

• IPad connects to the wifi but not internet

  I have a new iPad. It connects without problems to my wifi network at home, but when I try to connect to a network in a coffee shop, it shows that it is connected ok, gets an address IP etc, but when I try to use Safari I get a message that it is not connected to the Internet. This has happened in two branches of McDonald's when I tried to use their network. Once a portal connection captive flashed for a moment, but disappeared before I could connect.

  I tried to forget the network and reconnect, a restart of two buttons, reset the network settings, tried to use Google DNS, but none of them have worked for me. My iPhone works without problem on the same network

  Any suggestions on what I can try?

  Vinnie

  Try using another browser. In my experience, sometimes Safari have problems viewing a page ' agree to our conditions "on the hot spots. I have Atomic but there are others out there. Once you connect, Safari will not let you access the conditions page, use the other browser, which should, so you can use whatever one you want to continue browsing.

• Acer Aspire one laptop has full connection to the router but no internet, wii is router connected work properly__

  under the heading of ipconfig/all says media disconnected and NO active dhcp, LAN will work wireless connected but NO internet

  Hi jmoraski8,

  Try these steps and check the result.
  Step 1: Dynamic Host Configuration Protocol (DHCP) lease renewal
  a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

  Step 2: Check obtain an IP address automatically
  a. open Internet Explorer, go to tools > Internet Options > connections > LAN settings > uncheck all boxes except "automatically detect connection settings.
  b. click ok to apply the changes.
  c. check to see if the problem persists.

  Step 3: If the problem persists, repair network connections
  a. see the repair network connections
  b. check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop connects to the network, but not Internet.

  I'm trying to fix a HP DV6000 laptop that can't connect to the Internet. It is running Vista Home Edition. It will connect to my LAN cable or wireless network, but not the Internet. I checked a few things and discovered that the TCP/IP protocol is missing. When I try to add using properties of LAN, TCP/IP is not an option.

  I did a complete system restore. System set!

• WIFI connects to the router but no internet connection on 15R 3521

  Hi, the new laptop 3521 with Win7 Pro the WLAN will connect to the selected wireless router but is unable to establish an internet connection.

  WLan Driver 1703 was duly installed once the Chipset driver was installed, as recommended.

  Fortunately, other mobile devices to connect to the same router. Ubuntu on this laptop was also happy to connect to internet on WIFI, only Win7 fails.

  Disabled the Win7 firewall, but no change. This connection, unidentified in the network and sharing Center.   Router SSID etc have been entered correctly. Remove the WLAN profile and not reinstated, no change.

  Tried to connect to another router wireless with the same result. I can only run this laptop on wired connection to the router.

  I am at a loss as to what other steps I could take to correct this key WLan / internet access.

  Any suggestions would be welcome. See you soon.

  Hi love,

  Thanks for your advice. I deleted the profiles (two identical found!), also removed all entries of all WiFi routers in Win 7 registry. This step has not resolved the problem.

  However, I found the reason for the connection problem and the solution is the following:

  In the wireless connected (TP-Link) router, wireless--> channel settings is set to 'AUTO' (which is to select automatically 20 MHz or 40 MHz).

  In the device driver Dell WLAN 1703 (properties--> advanced--> bandwidth 802.11 n, the value has been set on (ie the Atheros is the default!))  "20 MHz.

  Once I put the option value "20 MHz / 40 MHz Auto", the connection comes to life.

  What a relief!

  The question is now completely resolved. Thank you to all who have contributed.

  Better with respect to Dzsino.

• Connected to the network but no internet access?

  I had problem connecting to internet. What is happening is that my computer connects to my wifi network, but then a yellow sign with exclamation sign will appear and it says "no Internet access. I'm tired of checking my browsers and they do not connect. I tried ping and he said something in the sense of "cannot find server". Tried to update the drivers, but either they are up to date, or even can not be updated because it is not connected to the internet. Finally, I tried the system restore, and it worked miraculously! But now, about a few days later, the problem came again and I restored the system again. But I thought I can't do this forever. Is there a way to fix it or at least to know what is the problem?

  Before I restored it, I wrote the changes that making it in my programs and updates that will be removed or modified. They are here:

  Adobe Reader X (10.1.4) MUI 10.1.4
  Microsoft (Bluetooth) 06/21/2006 6.1.7601.17889
  Fix for Package_for_KB2732487 (KB2732487)
  Update of security for Package_for_KB2705219 (KB2705219)
  Update of security for Package_for_KB2712808 (KB2712808)
  Update of security for Package_for_KB2722913 (KB2722913)
  Update of security for Package_for_KB2731847 (KB2731847)
  Update for Package_for_KB2647753 (KB2647753)
  Update for Package_for_KB2729094 (KB2729094)
  Update for Package_for_KB2732500 (KB2732500)

  Adobe Reader X (10.1.3) MUI 10.1.3
  Microsoft (Bluetooth) 06/21/2006 6.1.7601.17607

  Also, I know that this is not a problem with my router or modem because all other devices in my house can access the internet except for mine. I tried to connect my laptop through an ethernet cable, and it still does not work.

  My computer is an Acer Aspire Timeline X 5830TG-6614

  Thanks for the help!

  Hi FinalEclipse,

  Follow the steps below to update your network adapter driver:

  1. If your computer is a Dell, HP, Sony, etc., go to the manufacturer Web site and download the driver for your network card, specific to your computer model and save the file to your desktop so that it is easy to locate.
  2. On your computer, click Start
  3. Right click on computer then Properties
  4. Select Device Manager
  5. Expand the network adapters
  6. Right-click on your network map, and then select Update driver software
  7. Select Browse my computer for driver software
  8. Click Browse
  9. Select desktop
  10. Select the driver that you saved in step 1.
  11. Click Next and follow the remaining instructions.

  Let us know if that helps.

• Samsung S6 connects to the router but no internet

  When I switched to xfinity I bought a C6300. I had problems with the first not allowing my NAS to connect so I exchanged against another. My phone would connect to the router and work fine for awhile then lose Internet connectivity. The only way to get it back is to reboot the router. I tried several different units, and I am now on a C3700. The problem still exists and seems to be deteriorating. All of the suggestions.

  I solved my problem by replacing the Netgear with a Zoom. It was the only one that I could find who said it would work with Android. I hope that Netgear will get things straightened.

• can connect to the network but not internet XP

  I use a computer on a local network xp, can connect to the network, ping the DNS server, gateway, etc.  However, I can't not conncet to internet.  When I ping a web address using the address of the site name or xxx.xxx.x.xx I have no success.  Tried to reset winsock, tcp/ip, without success.  Would appreciate any help.

  First course of action:

  1. turn off the PC.

  2. turn off the router.

  3. turn on the router.

  4. turn on the PC.

• Connected to the network but no Internet

  I recently networked a former model from Dell and HP new mother, running windows 7.  The dell has XP.  Both computers are hard connected to the router with a connection to a cable modem.  I have the network connection, the Dell but IE and Mozilla, both will not draw a web page.  Two Windows firewalls are disabled and removed Norton Software.  Software AVG has been run on the computer dell with no viruses.  I read that viruses are my problem.  Can anyone help?

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• WiFi is connected to the router, but "no internet access?

  Hi I have a Samsung r519 laptop with windows 7. I am connected to my routerbut I can not always connect to the internet. I think that the problem can be on an ip address, dns or parameter setting of the server. My ipv4 settins are set to 'use ip address of followig' and 'use the followig dns servers. My ipv6 settings are set to automatic. I would like to know if you want pictures of my computer screen. Help, please.

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Did you do any hardware or software changes to your computer recently?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooter
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  For the DNS server, follow these steps.

  a. Click Start. Type cmd in the search box and press ENTER.

  b. in the command prompt window, type the following command and press ENTER:

  ipconfig/flushdns

  Note: There is a space between ipconfig and /.

  It will show you the message successfully empty the cache of DNS resolution.

  c. again once, in the command prompt window, type the following command and press ENTER.

  ipconfig/registerdns

  d. type the following command at the command prompt and press ENTER.

  ipconfig/all

  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

  If this is the case, try this:

  a. type ipconfig enough at the command prompt and press ENTER.

  b. then, type ipconfig / renew in command prompt and press ENTER.

  The test again by typing ipconfig/all to see what is the address?  (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Then, if the problem persists, use method 3.

  Method 3:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  How to reset TCP/IP using the NetShell utility
  http://support.Microsoft.com/kb/299357

  I hope this information helps.

  Please let us know if you need more help.

  Thank you