Configuration of the BIOS Lock/password

Similar Questions

• Workstation HP Z240 tour: easy access boot with the configuration of the BIOS?

  Is it possible to have ease of access begins with the configuration of the BIOS?

  Is it possible to have by pressing F10, etc. also start the tool for easy access?

  Is it posible to invert the colors of the BIOS Setup?

  :-)

  If I understand your question, here are the answers

  Is it possible to have ease of access begins with the configuration of the BIOS? This is a feature of Windows, is not available in the BIOS

  Is it possible to have by pressing F10, etc. also start the tool for easy access? See above

  Is it posible to invert the colors of the BIOS Setup? NO.

• HP Pavilion G6-1011sx: HP Pavilion G6 I forgot the bios administrator password

  I forgot the bios administrator password.
  It's that I received the error code: 84935186

  Please help, thanks

  @GgTt

  Enter 31693108

  Kind regards

  DP - K

• one of my pc has placed on the bios supervisor password. now I need to use the bios settings to make some changes

  original title: supervisor password

  one of my pc has placed on the bios supervisor password. now I need to use the bios settings to make some changes, and I don't remember the password. What can I do to fix this?

  any practical advice will be much appreciated.

  Hello

  Check with support from the manufacturer of your system (manufacturer of motherboard for customized systems)
  or a real computer store (that makes its own domestic service).

  The Microsoft Community cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Re: Portégé R700 - how to reset the BIOS/supervisor password?

  Hi all

  I just bought a used Portege R700 and want to reinstall Windows.
  I can't access the BIOS due to a configuration of PasswordUtility from Toshiba supervisor password. The previous owner did not provide this password.

  How can I reset it?

  Thank you

  Hi Spets

  You cannot reset the BIOS password. It must be done by the Toshiba authorised service provider. I'm sorry.

  If you need addresses and phone numbers, you can find it on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• Configuration of the BIOS on Portege R705

  I need to set the BIOS to boot from the CD/DVD drive, but, first of all, it does not give me simple choices such as: etc. floppy, hard disk,. Secondly, when I get in the boot priority section, the arrows do not make and the keys f6 or f7 do not do. Please help, need to reset my password. Am completely locked.

  When you start your Portege, press F12 to get into the boot menu. Choose here device CD/DVD and press ENTER.
  It works for you?

• HP EliteBook Folio 9480 m: the bios administrator password

  Hello

  I forgot my administrator bios password; you cam hepl me pls

  Thank you

  Please follow these steps to make sure that the USB is formatted FAT 32.

  MAKE SURE THAT THE DATE AND TIME IS CORRECTLY SET BEFORE RUNNING THIS TOOL. Please make sure that the USB is formatted in FAT 32

  Please follow these steps to clear the BIOS password:

  Save the attached file in this e-mail on USB than SMC. BIN and insert into the system (or save the file to the root of drive d: HP_TOOLS)

  -Press 'Key + arrow UP key + arrow down key Windows' all keys at the same time and turn on the system

  -Release all keys and press F10 at HP logo to go to F10 setup for "Reset BIOS to factory default security"

  Causes of errors control MSC

  Bad UUID is provided

  Try different brands and more small USB key 2 GB or smaller

  USB drive is not formatted FAT32

  BIOS, date and time must be current and up-to-date.

  SCM is disabled in the BIOS.

• Configuration of the BIOS XW8600 for SSD and HDD

  Until recently, my xw8600 has been configured with the emulation of SATA under storage on the separate IDE controller Options.  250 GB hard drives connected to the SATA 1 and SATA ports 0 and readers of DVD RW Drive connected to 2 SATA and SATA 3 ports.

  I wanted to install a GTX240 Neutron Corsair SSD, but discovered when I changed the SATA RAID + DCIS emulation (to activate all 5 ports of SATA controller and optimize the performance of the SSD), the system could not find the boot drive.  I checked the startup command settings and found the slot drive HARD listed title module of memory into the attached USB printer HP Officejet 7500 a first and could not be changed.

  I decided to go back to SATA IDE emulation separate, remove the optical drive on SATA 2 port and attach the SSD it.  This facility is expected to start successfully; but after installing windows 7 x 64 on the SSD (Windows XP, x 64, still on the HARD drive), I found Windows 7 has been very very slow.

  Can anyone offer any suggestions or comments on how I can improve this situation?

  Thanks for any help, you can suggest.

  What is an installation of Windows 7 Pro 64 - bit of a retail installation DVD purchase, or something HP?  If I remember well Vista 64 was the latest HP OS with sold.  In this case you won't have to deal with a set of HP restore disks.  I would never do an "upgrade" of a prior installation of OS in W7.  I only do not clean install W7 on a freshly long-type reformatted hard drive or an SSD.  I buy my "system builder" OEM license W7Pro 64 - bit DVD/COA from newegg.com (you can find that many sources and approximately 140.00 each).

  Plan to do a clean install on this SSD from scratch and when you format before that settle does long formatting version, while it is booted from the W7 DVD.  That will take some time.  Or, if you have a functioning before the OS install on a hard drive, you can restore the xw8600 you can connect the SSD in the second or third SATA port and reformat (long version) management of records like this.

  The boot drive or SSD, Spinner, must always be connected to the primary SATA port, which in these workstations, is usually blue plastic, while the rest are a dark black.

  Make sure that your BIOS is later... There was a version for this and the xw6600 with a few months ago.  It is an important.

  Put the SSD in your favorite mount, hang it in the main SATA port, prepare the W7 DVD in the DVD drive (which should be attached to the second port SATA or IDE cable if it's a DVD ATA drive). Throwing xw8600, go straight into the BIOS and go to which you can change the SATA emulation.  Change that on "RAID + AHCI.  Save on the way out of the BIOS, and the workstation will now reboot usually requiring formal approval of the change F1.

  Demarrer start on the DVD, select clean install and things will be fine.  I usually set my boot order to start hard drive/SSD first and second optical drive.  Then, when I load an OS I just use the F9 key during the early start to switch to the DVD player for this single event.

  It's the key information: If you have correctly set to "RAID + AHCI" SATA emulation for the W7 installation process, then the appropriate drivers will not be loaded from the DVD on the startup disk, and you won't receive anywhere near your expected speed.  I helped a friend who had done exactly what you did, and when we corrected things literally double SSD performance scores.  I recommend that the reformatting/clean reinstall from zero here, because you want to really perfect the basics and the way he was treated initially can leave you with a few important questions.

  After you have things working with the SSD and the DVD player you can add in your other material sequentially.  I would like to make a reboot between each addition, just be very careful.  Some old HP DVD drives have a problem with W764 loading during the emulation of the SATA BIOS is set correctly and there is a solution for this, but you don't want from now this info.

  All the advice I have written in this forum about the xw6400 installs apply to the xw6600 and xw8600, including information on the upgrades of the processor.

  Let us know how things are, so that others can enjoy...

• Satellite R830: How do the BIOS settings password protected?

  Hi all

  I installed a software protection against theft in my Satellite R830, but he suggested that I adjust the settings in the BIOS so that it will start only from the hard drive, and to make sure that no one else can modify it (if it is stolen), the BIOS settings are protected by Word.

  Can someone tell me how to access the BIOS at startup settings upward?

  Hello

  You can set the BIOS settings by setting the BIOS password.
  If someone would like to change the BIOS settings, the password of the BIOS would be necessary.

• The BIOS administrator password recovery

  I have a Compaq Mini CQ10-400 s/n CNC02648QX. My son has put both a boot password, we've been able to guess AND a second password necessary to access the settings of the BIOS itself that is lost.

  After 3 attempts, we get the error "system disabled 75582004.

  From what I've read in the forums, the error code is a human readable a master password hash. So I don't think all of the "e9". "passwords that I found posted on this forum already at work. (and they do not have)

  Can someone please send the password that I have to enter the BIOS and remove passwords my son put and point me to a tool that I can use to perform the decryption myself later if necessary?

  Hello:

  Reboot and try the code:

  60480020

  Google clear the BIOS password and there are several sites of your choice.

• Satellite M30: How disable the BIOS boot password?

  Hello

  Before my vacation, I activated the startup password in the Bios. Now I want to turn this off, but it does not work. In the Bios, I can go to the Security tab, but I can't change the settings with the F5/F6 key or space. A beep is all I get. Entering on this point, I wonder to set a new password.

  Anyone know how to disable the password for a Satellite M30? Please note that I have not forgotten my password, I can always start the machine.

  THX,

  Werner.

  PS On this forum, I don't see any topic title, only the name of the authors. Is always normal? It is very convenient that way, but maybe it is related to my pc.

  Hello

  I found a step by step explanation to clear a BIOS password:

  "Turning on the computer from a State"off"with the ESC key. You are asked "password =". "

  Enter the password, and then press ENTER. The unit will display: "the valid password is entered, the system starts up. Check the system. Press key (F1). »

  Press the F1 key. This will start the device in the BIOS Setup mode.

  Using the arrow keys or tab, move to the password field and select REGISTERED.

  Press the SPACE bar, enter the password, and then press ENTER. For now, the password field is transformed into NON REGISTERED. »

  Hope this will help you.
  Good bye

• The BIOS administrator password problem

  Hello. Im having a problem with my computer Bios administrator password. I remember I put a password once, and then I removed the password once again, but now that I formatted my pc and returned to windows 7 ultimate, when I press F10 it asking me a password. I tried to put the same password I used the first time I tried, but it was not valid. I tried to put my user password is the administrator user, and it did not work... After 3 passwords, it shows me the numbers and I can't do nothing but put it off and on again.

  What seems to be the real problem? can someone help me? I need to make some changes in the video memory Bios.

  My laptop is a HP pavilion dv6-2150us, inter core i3

  Ok.
  Try the following
  60783438
  
  Please don't forget to share your positive or negative result with the community.

• Tecra S2: Question of characters with the BIOS boot password

  This is my laptop:
  Tecra S2: Intel Centrino Mobiltechnologie mit Intel Pentium M processor 740 / XP Pro / 512 MB DDR / 80 GB/15 "SXGA TFT / CD - RW - DVD - ROM
  Model PTS20E-18S032GR number
  purchase 30/01/2006
  link:
  HTTP://DE.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=DE&PRODUCT_ID= 106134 & DISC_MODEL = 0

  My problem is, that I give with the software Toshiba guard easily a password to start with 9 letters: "cjbasdahl." For safty, I write again the password. I do and write again, 'cjbasdahl '. The computer accepts the password because the first password is the same how the second password.

  When I start (boot) the laptop will have a password with 8 (not 9) letters. I can't use the password 'cjbasdahl '. What can I do? I form the password coz when I boot the leng even as the password or not?

  When I did find the password. What can I do?

  Hello

  The fact is that the BIOS password can be removed only by the service of Toshiba.
  There is no need of a special procedure that can be done only by the service man.
  There is no other way to make mobile accessible full

• Tecra 9100: How to enter the BIOS without password BIOS?

  Hello

  I have a password on the bios of my tecra 9100, but do not remember what it is, anyone know a way around this to get into the bios?

  Hello

  Unfortunately I have some bad news for your.
  CA? s not possible to get into the BIOS without defining the old password.
  In this case, if you na? t know the password, so you should contact Toshiba service in your country. Only the ASP can remove the existing password.

• Satellite L70 - A - 13P - cannot get into BIOS after the BIOS setting password?

  HI, Satellite L70 - A - 13P

  I set up a password user and supervisor. Works very well. However, I can't get into bios. If I press F2 as usual, I have the box "enter password" (the same as for normal startup). After you type the password for the supervisor, computer continues initializing and do not get into the bios!

  I keep the key pressed F2 but nothing works.
  I also tried ESC, F1, INS, F12, 0.

  Help.

  User and supervisor password the same?
  Have you been able to get into the BIOS in the past?

  Proceed to a complete stop and restart the laptop. Then try with F2 or F12. When you will be asked to set supervisor password and I hope that you will be able to enter the BIOS settings.