Configuration of the Kazakh with Bi Publisher fonts

Similar Questions

• Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

  Hello

  I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

  No writable calendars are configured for the invitations with the provider for Google Calendar.

  My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

  I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

  What can I do? Is there a solution for this?

  Thank you!
  Daniel

  Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
  In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
  You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
  Or you may want to try CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• Need help with the configuration of the Site with crossed on Cisco ASA5510 8.2 IPSec VPN Client (1)

  Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).

  Here is the presentation:

  

  There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.

  I was able to configure the Client VPN IPSec Site

  (1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa

  (2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.

  But I was not able to make the tradiotional model Hairpinng to work in this scenario.

  I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?

  Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:

  LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)

  race-conf - Site VPN Customer normal work without internet access/split tunnel

  : ASA Version 8.2 (1) ! ciscoasa hostname domain cisco.campus.com enable the encrypted password xxxxxxxxxxxxxx XXXXXXXXXXXXXX encrypted passwd names of ! interface GigabitEthernet0/0 nameif outside internet1 security-level 0 IP 1.1.1.1 255.255.255.240 ! interface GigabitEthernet0/1 nameif outside internet2 security-level 0 IP address 2.2.2.2 255.255.255.224 ! interface GigabitEthernet0/2 nameif dmz interface security-level 0 IP 10.0.1.1 255.255.255.0 ! interface GigabitEthernet0/3 nameif campus-lan security-level 0 IP 172.16.0.1 255.255.0.0 ! interface Management0/0 nameif CSC-MGMT security-level 100 the IP 10.0.0.4 address 255.255.255.0 ! boot system Disk0: / asa821 - k8.bin boot system Disk0: / asa843 - k8.bin passive FTP mode DNS server-group DefaultDNS domain cisco.campus.com permit same-security-traffic inter-interface permit same-security-traffic intra-interface object-group network cmps-lan the object-group CSC - ip network object-group network www-Interior object-group network www-outside object-group service tcp-80 object-group service udp-53 object-group service https object-group service pop3 object-group service smtp object-group service tcp80 object-group service http-s object-group service pop3-110 object-group service smtp25 object-group service udp53 object-group service ssh object-group service tcp-port port udp-object-group service object-group service ftp object-group service ftp - data object-group network csc1-ip object-group service all-tcp-udp access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3 access-list extended SCC-OUT permit ip host 10.0.0.5 everything list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3 access CAMPUS-wide LAN ip allowed list a whole access-list CSC - acl note scan web and mail traffic access-list CSC - acl extended permit tcp any any eq smtp access-list CSC - acl extended permit tcp any any eq pop3 access-list CSC - acl note scan web and mail traffic access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3

  access-list extended INTERNET2-IN permit ip any host 1.1.1.2

  access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0

  access list DNS-inspect extended permit tcp any any eq field

  access list DNS-inspect extended permit udp any any eq field

  access-list extended capin permit ip host 172.16.1.234 all

  access-list extended capin permit ip host 172.16.1.52 all

  access-list extended capin permit ip any host 172.16.1.52

  Capin list extended access permit ip host 172.16.0.82 172.16.0.61

  Capin list extended access permit ip host 172.16.0.61 172.16.0.82

  access-list extended capout permit ip host 2.2.2.2 everything

  access-list extended capout permit ip any host 2.2.2.2

  Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  asdm of logging of information

  Internet1-outside of MTU 1500

  Internet2-outside of MTU 1500

  interface-dmz MTU 1500

  Campus-lan of MTU 1500

  MTU 1500 CSC-MGMT

  IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1

  IP check path reverse interface internet2-outside

  IP check path reverse interface interface-dmz

  IP check path opposite campus-lan interface

  IP check path reverse interface CSC-MGMT

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 621.bin

  don't allow no asdm history

  ARP timeout 14400

  interface of global (internet1-outside) 1

  interface of global (internet2-outside) 1

  NAT (campus-lan) 0-campus-lan_nat0_outbound access list

  NAT (campus-lan) 1 0.0.0.0 0.0.0.0

  NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255

  static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255

  Access-group INTERNET2-IN interface internet1-outside

  group-access INTERNET1-IN interface internet2-outside

  group-access CAMPUS-LAN in campus-lan interface

  CSC-OUT access-group in SCC-MGMT interface

  Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1

  Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  AAA authentication enable LOCAL console

  Enable http server

  http 10.0.0.2 255.255.255.255 CSC-MGMT

  http 10.0.0.8 255.255.255.255 CSC-MGMT

  HTTP 1.2.2.2 255.255.255.255 internet2-outside

  HTTP 1.2.2.2 255.255.255.255 internet1-outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  crypto internet2-outside_map outside internet2 network interface card

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  Crypto ca certificate chain _SmartCallHome_ServerCA

  certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as

  quit smoking

  ISAKMP crypto enable internet2-outside

  crypto ISAKMP policy 10

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  Telnet 10.0.0.2 255.255.255.255 CSC-MGMT

  Telnet 10.0.0.8 255.255.255.255 CSC-MGMT

  Telnet timeout 5

  SSH 1.2.3.3 255.255.255.240 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet2-outside

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal VPN_TG_1 group policy

  VPN_TG_1 group policy attributes

  Protocol-tunnel-VPN IPSec

  username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx

  privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx

  username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx

  username vpnuser1 attributes

  VPN-group-policy VPN_TG_1

  type tunnel-group VPN_TG_1 remote access

  attributes global-tunnel-group VPN_TG_1

  address vpnpool1 pool

  Group Policy - by default-VPN_TG_1

  IPSec-attributes tunnel-group VPN_TG_1

  pre-shared-key *.

  !

  class-map cmap-DNS

  matches the access list DNS-inspect

  CCS-class class-map

  corresponds to the CSC - acl access list

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  CCS category

  CSC help

  cmap-DNS class

  inspect the preset_dns_map dns

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y

  : end

  Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN

  Please tell what to do here, to pin all of the traffic Internet from VPN Clients.

  That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)

  I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.

  Thank you & best regards

  MAXS

  
  

  Hello

  If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.

  I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.

  The command format is

  packet-tracer intput tcp

  That should tell what the SAA for this kind of package entering its "input" interface

  Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)

  -Jouni

• WRT160N v3: unable to connect to the page web configuration of the router with Firefox or IE

  Whenever I try to connect to my router's admin page, I get "the connection to the server was reset while the page is loading."  This happens with FIrefox 11 and started when I upgraded to 8 or 9.  A machine running FF 3.6 does not have this problem; I get right in.  Words IE 9 is "Internet Explorer cannot display the webpage" (after complaining about the certificate has expired).

  I ran Wireshark to see if I could learn something, but everything that I could understand was:

  https handshake was OK.

  First TLS packet is received by the router, which then immediately issues a reset and the connection is interrupted.  I don't know why.

  Has anyone seen this? or I have a setup that is screwed to the top (or router)?

  Then I did a full-on reset. I had tried to get in the Mode of administration, following an article in the FAQ, but the web page came in normal mode, default 192.168.1.1. From there on, I WAS able to make the success of downloading the new firmware from 2010 (v3.0.03). Unfortunately, once I've reconfigured the box to a similar to the previous configuration, I have the same problem: connection to https://10.244.122.1 of Firefox 3.6 works; 12 Firefox (now), it will fail, get the error "reset while page is loading". My last try will just disable the https - I just discovered where I can - and see if it will work. Because it's only on my home network, if traffic to the configuration page is not encrypted it really doesn't matter that much. (I had previously determined using Wireshark happened to reset during the TLS negotiation after the HTTPS had finished). And hell, that worked. So my problem is not resolved, but it is bypassed and I'll mark it closed.,.

• Configuration of the Simulator with Eclipse

  HI -.

  I use version JDE 4.5 with the Eclipse editor. When I run the Simulator, Simulator of 8300

  turn on and I see my app.

  How to set up so that another Simulator is launched? I tried to look at some options, but

  It was not clear. I didn't see any documentation on this, but I could have missed the right one.

  If anyone has seen elsewhere, please point me in the right direction.

  There are .bat simulators subdirectory files. Their launch shows the right Simulator, so I need

  find out how Eclipse knows which Simulator to launch.

  Thank you

  Amod

  To view the documentation on that, click on the Help menu of Eclipse and choose summary help.  Then expand 'BlackBerry JDE plug-in for Eclipse Guide', expand 'Configuring the BlackBerry Smartphone Simulator' and then click 'Specify a BlackBerry Smartphone Simulator for a specific type of BlackBerry smartphone'.

• Configuration of the network with several hosts (dVS/EtherChannel)

  Hey,.

  Let's say that there are 4 hosts, each with 2 NETWORK adapter connected to a switch. On the side of ESX, all uplinks are added to a dVS and the port group is set to 'Route based on IP Hash'.

  Host 1 > change of ports 1 and 2

  Host 2 > change ports 3 and 4

  Host 3 > change ports 5 and 6

  Host 4 > change ports 7 and 8

  The switch (Cisco) must be configured as:

  Port channel 1: 1 to 8 Ports

  OR

  
  Port channel 1: 1 and 2 Ports

  Port channel 2: 3 and 4 Ports

  Port channel 3: Ports 5 and 6

  Port Channel 4: 7 and 8 Ports

  Thanks for any help.

  A port for each host channel... This article shows an example with two hosts: example configuration of EtherChannel / switches control protocol LACP (Link Aggregation) with ESXi/ESX and Cisco/HP (1004048)

• [need help] Function body of PL/SQL returning the SQL with BI publisher

  Hello
  
  I'm new to BI publisher, back then I used ocj4 for pdf printing, but then we got BI publisher. We want to have a better relationship, since we always used the standard one.
  
  My pl/sql like this look

  DECLARE
    q varchar2(4000);
    list_betreuer htmldb_application_global.vc_arr2;
    list_semester htmldb_application_global.vc_arr2;
    list_status htmldb_application_global.vc_arr2;
  
  BEGIN
  
   -- variable to store the list
   list_betreuer := HTMLDB_UTIL.STRING_TO_TABLE(:P61_BETREUER);
   list_semester := HTMLDB_UTIL.STRING_TO_TABLE(:P61_SEMESTER);
   list_status := HTMLDB_UTIL.STRING_TO_TABLE(:P61_STATUS);
  
   -- Query begins
   q:= 'select p1.name, p1.vorname , a1.tel, a2.tel, '; 
   q:= q||'ab.thema, ab.status, ab.typ, s.bezeichnung, p2.name ';
   
   q:= q||'from person p1, person p2, adresse a1, adresse a2, ';
   q:= q||'zuordnungp_a zpa1,zuordnungp_a zpa2, ';
   q:= q||'abschlussarbeit ab, semester s ';
  
   q:= q||'WHERE ab.SEMESTER = s.OBJECTID (+) ';
   q:= q||'AND ab.STUDENT = p1.OBJECTID (+) ';
   q:= q||'AND ab.BETREUER = p2.OBJECTID (+) ';
  
   q:= q||'and p1.objectid = zpa1.person (+) ';
   q:= q||'and zpa1.adresse  = a1.objectid (+) ';
   q:= q||'and zpa1.art (+)= ''Privat'' ';
  
   q:= q||'and p1.objectid = zpa2.person (+) ';
   q:= q||'and zpa2.adresse  = a2.objectid (+) ';
   q:= q||'and zpa2.art (+)= ''Geschäft'' ';
  
  
   -- Loop for betreuer list
   FOR i in 1..list_betreuer.count
   LOOP
      IF i = 1 THEN
      q:= q||'AND (ab.betreuer = '||list_betreuer(i);
      ELSE
      q:= q||' OR ab.betreuer  = '||list_betreuer(i);
      END IF;
   END LOOP; if (list_betreuer.count>0)THEN q:= q||')'; END IF;
  
    -- Loop for semester list
   FOR i in 1..list_semester.count
   LOOP
      IF i = 1 THEN
      q:= q||'AND (ab.semester = '||list_semester(i);
      ELSE
      q:= q||'OR ab.semester = '||list_semester(i);
      END IF;
   END LOOP; if (list_semester.count>0)THEN q:= q||')'; END IF;
   
   -- Loop for status list
   FOR i in 1..list_status.count
   LOOP
      IF i = 1 THEN
      q:= q||'AND (ab.status = '''||list_status(i)||'''';
      ELSE
      q:= q||'OR ab.status = '''||list_status(i)||'''';
      END IF;
   END LOOP; if (list_status.count>0)THEN q:= q||')'; END IF;
   
   -- htp.p(q);
   return q;
   
  END;

  the question is how can I generate a pdf with this query using BI publisher report, what should I do?
  
  
  
  Thanks in advance
  
  
  Danny

  Check this out to see if this helps you. This article talks about passing parameters to the BI publisher of Apex report.

  http://tylermuth.WordPress.com/2008/03/31/call-bi-Publisher-Web-services-from-apex/

  Thank you!

• How to change the configuration of the BIOS with NO SIGNAL - to accept the new card PCI - ex

  Compaq Presario SR2030NX

  Product #RJ036AA

  S/N {removed privacy}

  MB: ASUS A8M2N - LA

  Bought: October 2006

  OS: Windows XP Media Center 05

  New graphics card: MSI N210-D512D2 graphics card GeForce 210-512 MB, DDR2, PCI-Express 2.0 (x 16), 1 x DVI, 1 x VGA, DirectX 10.1, mono-emplacement

  New: 480w PSU

  ERROR:  NO SIGNAL on monitor and can not reset the BIOS to accept the new video card in the PCI slot

  PROBLEM: The user reports the monitor suddenly became white with blue lines finally erased.   On start-up, the screen shows "No Signal" then turns off.

  Troubleshooting has included:

  Fixing monitor with its cable to another PC - monitor work

  Fixing working monitor and cable to the PC - No Signal

  There is no boot beeps, fans, lamps, not work cable defeated, no video.   I concluded the embedded video component failed.

  Installed the new video PCI - ex card and new power supply 480w and still get NO SIGNAL.   New video card specifications called for a minimum 350w power supply.  The fan on the new video card PCI - ex works.  Search on the HP Support pages indicates that the BIOS should be modified to change the type of PCI slot type in-flight video.  Makes perfect sense to me, sounds like it might work.

  How to reset the BIOS when you do not see what you are doing?

  I have moved the jumpers to reset the CMOS, but cannot tell if it worked or not.  I tried a couple blind BIOS resets, but I could do this for months.

  If I could determine the Version of the BIOS, I might be able to blindly to reset the BIOS.  The Compaq Options of Menu and "BIOS Setup Utility information" web page provides instructions for BIOS version 6 or less and version 7 and greater - menus and access steps are very different.

  QUESTIONS:   How to determine the version of the BIOS.  Which key I hit to access the BIOS (F1, F10, esc, Del)?  Which menu I followed to reset the type of video, so how can I save and exit?

  

  Thanks for any help

  GJB

  Thank you Paul,.

  I didn't know that it was just a function of Regedit - piece of cake.

• Configuration of the WHO with cert of third party for SLB

  Hello!

  We replace our third-party certificates for OEM and we bought the cert Entrust to our security group.

  Even read literature that oracle has provided can be a little difficult.

  We were told in the RS to create a new portfolio, which we did with the new certificates, but the documentation says to import the cert of the PES in the trust store of SGD and the Agent (1481192.1) that the cert must be in base64 format in a text file.

  1. How is - this (export the cert SLB in base 64 format)?

  2. the cert should be in the wallet in order to provide WHO with the base64 text file or is just necessary on the server where is SGD?

  3 - is a necessary portfolio or can we just use a keystore of Java to ensure the cert?

  4. What is the best documentation for this process? I see a TON of documentation that seems to go around itself and can be a bit confusing.

  Thank you in advance for your help!

  Let me understand what you want to do first because it seems to me that you are now quite confused after reading the oracle documentation.

  You just want to replace the SLB certificate used by the WHO, because you have a load balancer for which you have received a new certificate?

  So all you have to do is to import this certificate into the SGD?

  1. your PES cert so probably already in base-64 format. It is a text file and starts with a - CERTIFICATE - START? If this isn't the case, you can use openssl to convert.

  2. the format base64 certificate just need to be on the server starting from which you run the command emcli to and accessible by the user who executes the command

  3. emcli command will import the cert in the portfolio appropriate/keystore

  4. don't know, too much confusion autour docs

• MUSE can cause a build your own t-shirt or a banner on the site with cliparts and fonts available?

  I have a client who needs a site that will require a build your own Tee Shirts and banners on the site. Is it possible within the MUSE?

  No, this is not possible with Muse. Which should be a personalized coded.

• Configuration of the DB with Informix DB adapter

  Hi all

  I have setup a data source Informix on Weblogic 10.3.6 selecting pilot weblogic informix XA. I have a BPEL that calls the adapter DB with a pure SQL query (a query is bit complicated). But his throw after exception under test:

  Exception occurred during invocation of the JCA binding: "binding JCA execute of operation 'getDetailsFromDB' failed due to the reference: DBWriteInteractionSpec Execute Failed Exception."

  unknown has failed. The descriptor name: [unknown].

  Caused by java.sql.SQLException: cannot call Connection.commit in the distributed transaction.  Transaction manager will commit the resource manager when the distributed transaction is committed...

  Check the logs for the record output full DBAdapter before this exception.  This exception is considered as reproducible, probably due to a communication failure.  To be classified as not reproducible instead, add property nonRetriableErrorCodes with the value '0' for the deployment descriptor (i.e. weblogic - RA.Xml).  "For auto retry a reproducible fault defined these properties of composite.xml for this invoke.

  I also made sure to have platformClassName as "org.eclipse.persistence.platform.database.InformixPlatform" under javax.resource.cci.ConnectionFactory in DbAdapter under deployment settings.

  Can anyone shed some light on what's going wrong here?

  Thank you

  Jahangir

  In fact, it was my mistake. I created the XA data source but I gave the name in the field of data source no XA in the JNDI.

  Thank you

  Jahangir

• New configuration of the computer with Acrobat XI Pro Upgrade package

  I bought a new system with Windows 8 Pro, I throw in desktop mode. On my OLD system, I installed a purchased copy of Acrobat 5 Pro, which I later upgraded to Acrobat 8 Pro. My question is: what installation process I have to follow to install an copy newly purchased upgrade to Acrobat Pro XI on my new computer system, which currently is not one of my products from Adobe installed on it?

  You only need the serial number of the previous version that qualifies you for the upgrade.  You don't need to have one of these previous versions installed on the new machine.

• Configuration of the server. the JDeveloper + BI publisher App support

  We have a project to build an application using JDeveloper and BI publisher for reporting purposes.
  System must support as users of 20-35.
  App must be accessible via the internet from regular PC or laptop "in this phase, pahase next will be for Ipads... mobile devices."
  We want to host the application in our own server.
  If we ask ourselves what should be the right approach to take on the configuration of the servers.
  something like (a server for a database, a server for BI...) and also the oracle products do we need to install to be runnig Jdev and BI
  
  I heard also that we should wait for a new version of Jdeveloper due Jdeveloper and BI will work together in a simple way.
  
  Thanks a lot for your help.

  Usually, you have a server for DB and one for parts of Fusion Middleware (WebLogic for ADF and pieces of BI Publisher).
  The exact specifications of the server depends on the specificity of your applications, how it is written and how it is used - the best way to determine those who are really test your application under load.
  (you can use Oracle Application testing Suite or JMeter to parts of the ADF).

  I would say that you go with the 11.1.1.7 for JDeveloper and BI Publisher version.

• PDF with BI Publisher configuration

  Hello
  
  I had a question about the configuration of the print server to 4.1 APEX or say that any version...
  As said, to activate PDF generation one must configure the print server. It can be done using BI using URL link/xmlpserver/convert xmlpserver and providing other details like address, hostname and port.
  
  So I was wondering how authentication takes place on the side BI xmlpserver? Or is it as a treatment for any request that is received on the/xmlpserver/convert?
  
  Note that I have different database for APEX and BI.
  
  Thank you!

  Hello

  There are three different ways by their SUMMIT to generate PDF documents, you can use the print option of conventional reports, interactive reports printing option, and you can use report queries (which can be found in the shared components). You condition is better filled by using queries to report, because the report queries allow you to include multiple SQL statements, i.e. multiple result sets in a single PDF document. So what you would do is create your page with several traditional or interactive reports, then do NOT print on these reports individually, but rather obtained for components that are shared-> report queries and define your query to report it (with several SQL statements). While you use the plugin word of BI Publisher to create your presentation / model, download the RTF and associate with the query for your report. And then, as a stage final, you create a "print" button on your report page and select your query report as the target for this button. If you use filters, - where clauses, etc. in the parts of your report, you can use the same clauses - where in your report query, and your reference variable to filter via the bind syntax elements. And of course this would require you bind a report defined in BI Publisher, you can continue to set everything inside the APEX.

  Kind regards
  Marc

• I can't locate the toolbar under the TOPIC when you enter an email, the one with the font size, color etc.

  Hello
  I was never able to locate the toolbar normally below the subject line when you type an email...
  It comes to the bar with the font size, color etc. At all the extras for letter writing, bold, underline, italics etc...
  Have always had it with previous systems, but never with Thunderbird... Sherlock