Configuration of the Oracle Workflow with two DB monitor

Similar Questions

• Configuration of the PIX 520 with two links to Internet

  Hello.

  I have a pix 520 with four interfaces ethernet firewall, in fact I am with

  just two interfaces,

  Ethernet 0 outdoors

  Ethernet 1 inside

  ethernet2 closed intf2

  ethernet3 closed intf3

  Thus, in the interface to the outside, I have access to the internet, but now I

  access to the internet and I want to configure the two, I mean,.

  a single network inside and two internet access,

  is it posible?

  the perhaps configuration.

  Ethernet 0 (access 1) outdoors

  1 Ethernet (ip 10.1.1.1) inside

  ethernet2 outside2 (access to internet 2)

  ethernet3 inside2? (ip 10.1.1.2)?

  Thanks for the help,

  You can plug it in like that, but there is no way to route traffic by default. PIX does not support this type of connections that you can only configure a default route on the pix. This link should help describe what you can do: http://www.cisco.com/warp/public/110/pixfaq.shtml#Q18

  I hope this helps.

  Kurtis Durrett

• Possible to define strategies of OAM configuration on the same site on two different

  Is it possible to define strategies of OAM configuration on the same site on two different servers?
  
  One of the sites to have anonymous access but it to be protected. How to set up a policy without it automatically applies to all Web sites that match regardless of the host.
  
  How to differentiate the two OAM sites so that I can apply security different strategies for each of them?
  
  Thank you.

  You can refer to this [recent thread | http://forums.oracle.com/forums/thread.jspa?threadID=878094&tstart=0].

  Also, if one of the sites requires anonymous access for all the content and it's not going to change in the foreseeable future, just don't install/activate webgate on that.

  -Vinod

• How to exclude the Oracle Workflow installation CD companion server?

  We are modernizing our E-Business suite 11i database to 10.2.0.3.
  
  The E-Business suite upgrade request notice to install "Oracle Database 10 g products" Companion CD on 10g of the House. Oracle default workflow server is included in the guide installation with a CD Type 'Install a database Oracle 10 g products'. However the installation document CD companion says that don't install Server workflow on the database of trade electronics uite, as indicated below.
  
  Now how can I exclude the Oracle workflow installation CD companion server?
  
  ================================
  Note: Do not install Oracle Workflow Server in Oracle E-Business
  Office database. If you want to use the version of Oracle Workflow
  available with Oracle Database 10g, or any Oracle database
  components that depend on the version of Oracle Workflow, then you
  need to install the Oracle of Workflow Server in a database that is not used
  Properties of an instance of Oracle E-Business Suite.
  For an Oracle E-Business Suite database, you can continue to use the
  version of the Oracle Workflow Server integrated in Oracle E-Business
  Suite.
  ================================

  John,

  You should ignore the steps under "Preparing Oracle Workflow Server for the Oracle Workflow Middle Tier Installation", but the workflow will be installed as part of the accompanying CD (select option 2 - products of Oracle database)

  Upgrade of Oracle Applications 11i database 10g R2 (10.2.0.3)
  http://Oracle-Apps-DBA.blogspot.com/2007/09/upgrade-Oracle-Applications-11i.html

  Here is the link for the steps you need to jump:

  Prepare mid-level Workflow Oracle Oracle Workflow Server Installation
  http://download.Oracle.com/docs/CD/B19306_01/install.102/B15664/install_sw.htm#BABHHHCC

• When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I use Vista 32 bit. I started to see this problem when I recently copy photos from an SD card.

  When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I saw hidden files enabled in folder options.

  Any help is appreciated.

  Hey guys... I found the answer... Problem is with the software vaio content analyzer that comes with the vaio...

  It just search for Vaio Content Analyzer (parameters) and deselect
  
  Video analysis
  image analysis
  analysis of the music

  I went looking for this crazy thing... used almost all types of online scan, and finally to find that it is caused by an internal software only...
  anyway thanks to all... Hope it helps someone in the future :)

• LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  Check your hosts file.  to help with this and more:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• What is the name of the circular icon with two swings in the content panel?

  Adobe Bridge CS5

  Win 7 Pro 64-bit

  What is the name of the circular icon with two swings in the Panel content above the thumbnail image of a raw file? I can't find documentation about it.

  Thanks in advance.

  Thanks for the keyword "badge".

  With that, I found it's called a

  "Badge of parameters.

  There is also a badge of culture which has an icon of culture.

  

• Hide number (or number format) on the Oracle report with bar code

  Hi al!
  I made an example of printing barcodes on the Oracle report
  with the link for help:
  [http://download-west.oracle.com/docs/html/B10602_01/orbr_barcode.htm | http://download-west.oracle.com/docs/html/B10602_01/orbr_barcode.htm]
  
  However
  I want to hide under barcode images or Format number!
  Ex:
  |||||||||||||| -> barcode images
  1234567 > barcode number
  
  I want to: hide: "123456" or format: "123.456".
  
  Thank you!

  Hello

  The Image is generated by the java code in oraclebarcode.jar
  It is possible to 'hide' a part of the image by putting an object ("rectangle" for example) on the part of the image that you want to hide.

  Concerning

• Replace the Oracle Logo with the logo of the customer

  Oracle Forms Wizard has created a form with "Oracle" logo in the upper right.
  How to replace the 'Oracle' logo with another logo?

  create your own menu in forms, save it under lety tell MYMENU.mmb, build, and then to assign MYMENU in the property of your form module menu (the mmx-file of the menu must be in your path of forms)

• Oracle Text returns no results when the string begins with two consecutive vowels

  Hello

  I hope someone can shed some light on a strange problem, that we face.

  Oracle Database 11 g R2 (11.2.0.4) EE 64 bit running on Windows 2008 Server R2.

  When I create an index of context on a column varchar2 (surname), it works fine when the surname begins with a consonant or a vowel. But when the family name starts with two vowels, that it fails to return the file?

  Please see example below:

  create table t1 (surname varchar2(50));
  
  insert into t1 values ('OURS');
  insert into t1 values ('JOURS');
  insert into t1 values ('ONES');
  
  commit;
  
  -- sync every 10 mins
  CREATE INDEX PERSON_SURNAME_IDX ON t1
  (SURNAME)
  INDEXTYPE IS CTXSYS.CONTEXT
  PARAMETERS('MEMORY 50M sync (every "SYSDATE+10/1440")')
  NOPARALLEL;
  
  -- no rows
  SELECT surname 
  FROM t1
  WHERE CONTAINS(surname, 'OURS') > 0;
  
  -- 1 row
  SELECT surname 
  FROM t1
  WHERE CONTAINS(surname, 'JOURS') > 0;
  
  -- 1 row
  SELECT surname 
  FROM t1
  WHERE CONTAINS(surname, 'ONES') > 0;
  

  Any help or advice greatly appreciated.

  Thank you

  Ours is in the list of default stoplist (list of words that are ignored)

  http://docs.Oracle.com/CD/B19306_01/text.102/b14218/astopsup.htm#CEGBGCDF

• two node Oracle RAC with two Oracle databases completely different on each node?

  We currently have two different applications that use Oracle databases.  Current configuration is two different oracle homes dbhome_1, dbhome2 with separate mounting LINUX points containing the Oracle homes and *.dbf files on a single host server.

  Previously, the idea was to set up a second server identical host configured as a 'data guard' for both of these databases.  Now, management wants to implement a cluster of CARS of two nodes, with each node running two databases.  With the Standard edition.

  I only did CARS of high availability and scalability for a single database.  Is it possible to run two completely different databases Oracle on a two-node RAC cluster?  I am inclined to think that they it has divided into

  two clusters RAC to two nodes on four small servers host.  Any suggestions or comments would be appreciated?

  Is it possible to run two completely different databases Oracle on a two-node RAC cluster?

  The short answer is Yes... it is possible.  It will work without any problem, as long as you have the resources available to an additional database.

  I am inclined to think that they it has divided into two clusters RAC to two nodes on four small servers host.

  There is another option.  In the past I have two databases on a RAC cluster that has been implemented for reasons of cost of license / (I don't think that this applies to itself, but you will need to check).

  However having seen on separate hosts that you have only potentially interruptions of service on a database if you decide to do something like upgrading from one of the databases and thus upgrade the GI as well.  This would mean interruptions in service for all your databases using the GI.

• Windows Server configured as the gateway crashes with referee interface

  I'm running the Active Directory to Windows 2008 R2 servers multiple infrastructure test lab. One of the functions as a gateway server, configured with routing and remote access. Each time, after a few hours, the network to public internet traffic stops. One way to solve is, is to restart the gateway server. When network stops, same gateway itself cannot connect to the public network, the DNS servers of the ISP ping with the IP addresses is answer. Ipconfig/release and / renew buy do a thing and disabling WAN network interface freezes. After that, try to stop and restart the server will be fallow with blue screen and cold reboot.

  WAN interface uses the pilot VMNET3 and Intel LAN interface 1000 (something like that). VMtools has been installed from the console of the last version of ESXi.

  Familiar with this problem to anyone?

  Try to change the external NETWORK adapter to E1000.

  ---

  MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• Double screen with two VGA monitors (model Inspiron 620)

  Hello

  I have an Inspiron (processor i5-2320 @3 GHz) 620 office. The graphics card is AMD Radeon HD 6450.

  With two displays analog VGA, I wanted to dual monitor.

  My problem is that the Office does not recognize the two vga monitors but that one monitor. Vga ports (I have two) on the desktop do not work at the same time.

  So, I tried to use the DVI port, but it is only allowed to use DVI - D (I thought I'd use two monitors if allowed the graphics card DVI connector VGA). DVI - D deosn seem to allow analog monitors.

  Currently, I only use one of the two with an analog monitor vga ports.

  I wonder if I should buy the new digital monitor that can be connected to the DVI - D port.

  Or is there a method to use both on the desktop vga ports?

  riofunk7,

  You have two options...

  (1) connect both monitors to the ports added discrete video card
  (2) connect a monitor to the integrated VGA port. Connect the other monitor to the additional port of discrete video card
  * Reboot the system
  * Press F2
  * Navigate to Advanced-Graphics Configuration
  * Activate Intel several monitor function
  * Press F10 to save your changes and exit the bios

• OfficeJet 7500 has the configuration of the fax machine with 2 telephone lines

  I have an Officejet 7500 a. The phone is a double line, phone double issue. The 2nd line/number is the number of fax. There is also a DSL service on the line and an answering machine for two lines on a phone. There is no separate cycles for two numbers.

  For installation, I shared the line out of the wall socket. We're going to the DSL modem. The other goes to a DSL filter.

  I tried to hang the black line of HP filter, then the line-1 printer. Then, out of the printer 2 - ext to a separator with several phones, including one with an answering machine. However, all the features of line 2 has been removed from all phones. I guess the line black/printer fails to pass. However I could pass the test of fax,

  So I had the idea of dividing the two lines into individual lines, feed on the second line in the printer (using the HP black line) and then again, and then recombine the lines and send them on phones. Now all the features of two line seems to work for phones, but when I run the fax test, it does not say "you do not use the type of appropriate phone cord.

  It looks like this:

  DSL filter - Splitter-L1 - L1-Splitter (recombine) - phones

  -L2 - HP Black line - 1-line 2 - ext - L2-

  I don't know why it's a failure, or what I have to do to make this work?

  For completeness, the separator is a 3 line separator, but we have nothing on the line 3. It is divided as follows:

  L1 + L2 + L3 Splitter - L1 + L3 (effectively L1)-cross

  -L2 + L3 (effectively L2)-for Officejet

  -L1 + L2 + L3 (not used)

  Ideas?

  Well, I seem to be at the end of the game. I tried sons of single line of the fax to the telephone/answering machine and fax test still does not work. I turned off also error correction mode and that made no difference.

  BUT it doesn't matter because the phones and fax all seem to work very well. I sent a fax to the service HPFAXME (several times) and it worked fine and in. The answering correctly and fax catch fax calls and ignores the voice calls. If someone meets the fax call they hear 3 beeps and the line is silent. In case, answering machine or direct pick-up on any phone, the fax is correctly. I also tried the FaxZero service and it worked fine.

  So, I will be content with that, even though the fax test fails. It bothers me because I do not let "loose ends" lying around, but since I can't read the mind of the engineers who designed it, and how they expected over this configuration, which I think would be relatively common, I'm just spinning my wheels.

• Want to know primary and secondary configuration to the call, Manager with the voice gateways

  Hi all

  Hope you all are doing well, I wanted to know that we have two other PRI service provider and we want one of them are primary and secondary schools on the other. We have two supplier dedicated 4-4 finish lines. Please provide me with the part of configuration that are required in this case and how to re a SP for primary education and another SP for secondary lines.

  Thank you

  Arjun keita

  Hello Arjun,

  For the full bridge configuration you can check the guides below, but for the PRI redundancy, you create dial-peers and specify the feedback:

  https://www.Google.co.in/URL?SA=t&source=Web&RCT=j&URL=http: / / www.cisco...

  Voice POTS dial-peer 1

  Destination-pettern 0 t

  Port 0/0/0:15

  Preference 0

  Dial-peer voice 2 pots

  Port 0/0/1:15

  Preference 1

  Dest-model 0 t

  Dial-peer voice 3 pots

  Description incoming only

  Incoming called-number. T

  Direct inward dial

  Aseem

  (Please rate if useful)