Configuration of the RAM to D10

Similar Questions

• Suggest the configuration of the RAM for Tecra A8

  Hi people,

  I want to increase the RAM on my Tecra A8 (PTA83L - 02 k 014) to 2 GB. Currently she is 512 MB. But I don't know what configuration of RAM (DDR/DDR2, speed in MHz etc.) should I buy?

  Please give me some advice. Also suggest me which are the best & reliable brands available in the market?

  See you soon!
  -Nitin

  Tecra RAM DDR2 support. Supoprted speeds: 400, 533, 667 MHz.
  I suggest you to buy 2 x 1 GB (memory equivalent 2 modul necessary to have dual channel mode) RAM DDR2-667. I currently using Venus Kingmax 2 x 1 GB (PC2-5400, model name: KSCD48F-A8KB5) without problem and the dual channel mode.

• This configuration of the RAM is good?

  My laptop was originally 4 GB of RAM running Windows 8 Pro x 64 (processor i3).

  This RAM is only a single stick of DDR3, but the motherboard supports 2 slots. Me is ever had a 2 GB DDR3 stick nine gave me.

  I wonder if this combination of good Rams - a 4 GB and 2 GB on two slots? Is it compatible?

  I plugged the 2 GB key to another location and Windows detected. My RAM was now 5.80 GB usable compared to 3.80.

  I have read a few forums that RAM sticks must be equal in size to be consistent like having a 8 GB of RAM with two 4 GB sticks.

  Is the RAM Installer good since I have 6 GB RAM for a 4GB and 2GB key?

  Thank you!

  My laptop was originally 4 GB of RAM running Windows 8 Pro x 64 (processor i3).

  This RAM is only a single stick of DDR3, but the motherboard supports 2 slots. Me is ever had a 2 GB DDR3 stick nine gave me.

  I wonder if this combination of good Rams - a 4 GB and 2 GB on two slots? Is it compatible?

  I plugged the 2 GB key to another location and Windows detected. My RAM was now 5.80 GB usable compared to 3.80.

  I have read a few forums that RAM sticks must be equal in size to be consistent like having a 8 GB of RAM with two 4 GB sticks.

  Is the RAM Installer good since I have 6 GB RAM for a 4GB and 2GB key?

  If it works - it's probably fine.

    
  Many recommend - for most systems - be stored in "pairs" for best results. through this board - you do not follow these best practices.
    
  If you begin to notice an instability of the system, take note of the questions and try to recreate them, then remove the additional memory (2 GB in this case) and see if the symptoms disappear.  (I'm not saying this will be the case - but if this is the case - it would be wise to focus on the memory do not match as a possible cause - just in case.)

• Help upgrade the RAM HP Pavilion n208tx

  Hello I have a model of HP Pavilion n208tx with one slot containing 4 GB 1600 MHz DDR3L SDRAM.

  I am the need for India to upgrade my system to 12 GB total RAM. Since I'm totally new to this sort of thing I need help regarding this.

  As I said, I want to improve my total RAM to 12 concerts, but I'm quite confused which one I should go for.

  I currently have with these options (I posted links for convenience):

  Crucial DDR3 PC3-12800 8 GB unbuffered NON ECC 1.35v 1024Meg x 64
  

  http://www.crucial.com/USA/en/scanview/444F50C031D926C3

  HP 4 GB 1600 MHz 1.35v to DDR3L SODIMM RAM

  http://www.Amazon.in/HP-DDR3L-1600MHz-SODIMM-laptop/DP/B00O48PQLW/ref=sr_1_fkmr0_1?ie=UTF8&QID=14160...

  Kingston 8 GB RAM LAPTOP 1600 MHZ PC3L (LOW VOLTAGE)

  http://www.Amazon.in/Kingston-laptop-1600MHZ-PC3L-voltage/DP/B00CQ35HBQ/ref=pd_sim_sbs_e_3?ie=UTF8&r...

  Corsair 8 GB DDR3L low voltage of 1.35v 1600 Mhz Laptop Memory SODIMM

  http://www.Amazon.in/Corsair-voltage-1600Mhz-laptop-CMSO8GX3M1C1600C11/DP/B00EHJ5U0K/ref=pd_cp_e_0

  These are referred to as shown on the Web sites.

  Can you please help me?

  Are the specifications above correct IE compatible with my system? Or if you find these misfits, it will be better if you could suggest some product according to the configuration of my system? 4 GB works perfectly as well.

   

  Thanks in advance.

  Hi oceane
  
  It will take time for me to look at the image it must be approved my moderators.
  
  The Samsung RAM that you now would be this I guess:
  http://www.Amazon.com/GP/AW/d/B00CV5GWHC/ref=redir_mdp_mobile/177-5507417-4516704
  
  No problem going in for 12 GB if you want to. But as I mentioned two identical RAMs have its own advantages.
  
  Both the RAM you mentioned in the previous post seems consistent. Check if there are 8 schools of black memory on the RAM (physically) - chip look at their pictures. Some have 4 banks of memory even if the configuration of the RAM you need may be the same - they work sometimes in some HP laptops (from various feedback in this forum).
  
  Concerning
  
  Visruth

• The RAM and HARD drive upgrade

  Hello

  I put my laptop, at level

  8.1 Windows 64-bit, Intel Core i7-4700MP @ 2.40 GHz

  Currently 12 GB of Ram - 8 GB & 4 GB Kingston DDR3

  Currently 1 TB Toshiba HDD
  http://storage.Toshiba.EU/CMS/en/HDD/computing/product_detail.jsp?ProductID=409

  I'm looking to upgrade the 4 GB of RAM to a 8 GB, I just don't know how many pins each room has. Any guidance where to find this without disassembling the machine would be very handy! -I think it's a 204pin?

  Also looking to add a second hard drive on my machine, what is the maximum size that can take this laptop? Ideally I'd like an another 1 TB HDD (same brand) than my current. Is this possible? Then the hard drives of 1 TB overprinting two system?

  EDIT: Is it possible to have the other as an SSD? Although that can't really benefits to have as a slave instead of a master drive.

  Thank you very much

  Dan

  Hello

  Manual - Page 2

  Plug

  RAM: Yes, 204pin SODIMM SDRAM desired. You can buy the memory stick to the exact configuration & preference even brand that is already installed on your computer laptop & listed in the service manual, so that it works correctly.

  Configuration of the RAM: 8 GB DDR3L 1600 MHz PC3L-12800 1.35v SODIMM SDRAM

  Run this tool to know the configuration & Details of RAM already installed.

  Page 51 details the procedure of replacement, fairly simple.

  HDD: According to the manual, it has double drive HARD support. You can put another 1 TB 2.5 inch 9.5 mm SATA HDD. You can buy additonal material of hard drive Kit (HP PRTs number: 720237-001) to install on secondary Bay for data storage.

  I would have preferred a faster 7200 RPM HARD drive with the cache higher like this , if you want more storage.

  Alternatively, you can replace the current HDD with SSD of similar form factor (2.5 inches SATA 7 mm or 9.5 mm thick) and make as boot drive by moving the drive toward SSD HARD integer before replacement & put old HDD to secondary storage Bay. SSD would defintely thrust upward performance drastically, but they are expensive - I would say worth the cost.

  Page 48-50 details the replacement procedure. Its relatively simple to do.

  Concerning

  Visruth

• M420 blades - how to maximize the RAM?

  I have 6 of them in production now and have undergone a DIMM failure so far.  I am looking to buy 4 more with maximum RAM (192G).

  Using the online Configurator which tells me:

  M420 blade supports a maximum of 3 DIMMS with a processor or six 6 DIMMS with two processors.

  In order to get the 192 GB using the simple option provided by the website (16 GB DIMMS) I need 12, but the M420 contains only 6 DIMM slots.  What magic to cram 12sticks 6 slots?

  Or is the maximum of 196G just a lie?

  I test on the DELL CHAT to see if I can get a response.

  08:00:23

  System

  Connected with Treona Phillips

  Treona tells me that there is a DIMM 32 GB option that does not appear in the configurator.   Why?  Are not the DIMM 32 G bars in stock?

  Treona says she doesn't know why the part does not appear, but she could quote it.  OK, so this is.  I use an active agent to get this maximum configuration of the RAM.

• What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  There is no such thing as a 2007 21.5-inch iMac; the 2007 iMac is all 20 or 24 inches. Click here and search for your model; the page it will say.

  (141476)

• The RAM configuration

  How configure if installed RAM is not reflected in the Device Manager?

  I have a Dell Latitude CPxJ model. It uses two dims curently reports 256 MB. I know that DIMMS A module A 256 MB.

  Hi ParrisAtkins,

  I suggest that you contact Dell support for more information on the memory (RAM) installed on the computer.

  http://support.Dell.com/

• D10 BIOS AND O/S SHOWING ONLY HALF THE RAM INSTALLED

  Computor was purchased with 8 1gig chips installed. The bios and the operating system report 4 GB.

  When I remove the ram in slot 2, 4, 6 and 8, the bios and the o/s report 2 gig.

  I have cleared the cmos memory and reinstall the RAM chips.

  Although the seller insists on the memory chips live are all good, I think that my next step would be to draw all and reinstall them one by one. What is the best way to do this, start with slot 1 and 3 and then add one piece at a time and restart?

  The problem has been resolved. It turns out that the RAM chips come from different manufacturers. 6 microns and 2 Samsung. All the chips worked well within the brand but do not work well together, I guess with some timing differences. I got all installed Samsung and all 8 concerts now appear.

• Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• What can I put the RAM and the hard drive of a Macbook Pro 13 "2014 in a Macbook Pro 13" 2016?

  The main logic of my Macbook Pro 13 "2014 card is broken, and it turns out that it will be much easier and just slightly more expensive, buying a new Macbook Pro that, in order to replace. I would like to set up my new Macbook Pro 13 "online in a way such that it is as cheap as possible, while always respecting the level of my former. So, if I could order one with the minimum of RAM and disk space hard and then put these pieces of my old in the new, this would be ideal. I don't know so much about it, and the question is: is it possible?

  my old Mackbook Pro 13 ":"

  -purchased new August 2014

  -3.0 GHz dual-core Intel Core i7, Turbo Boost up to 3.5

  -DDR3L 16 GB 1600 MHz SDRAM

  -Storage flash 512 GB PCIe

  -Intel Iris graphics card

  I'll get to buy e new generation Mackbook Pro 13 "with:"

  -2.9 GHz i5 or i7 3.1 (I've not yet decided)

  -RAM: Here I want to configure it with as little as possible, if I can just put the chips of the old in the new. Is this possible?

  -Hard drive: same thing: if possible, I want to get the cheapest option and simply put the old in the new. Possible?

  Thank you in advance to anyone who might take a few minutes to help out me! It would be much appreciated!

  •

  The RAM is not transferable, and the reader will be not as fast as the original of the newest computer; In addition, change it the warranty of the news of the computer.

  (143318)

• Develops the RAM module on motheboard

  Can someone tell me if it is there this possibility to solve many problems as stress CPU due to the swap hard drive memory and so?
  Hello world!!!

  I'm oddly attracted to whether y at - it a possibility of developing the memory of this laptop because I think is possible future increase
  performance of this machine... do you agree with me?

  Thank you very much

  As far as I know, hardware upgrade on W100 is very limited and I didn t find any info on the upgrade of RAM. Specifications W100 should have 2 GB of RAM and with the right configuration of the OS, it should be quite enough.

  Please note: W100 is not classic notebook and upgrade is very limited on this little toy.

• Cannot increase the RAM in end-15 27 "iMac, retina

  This question drove me crazy.

  End of last year, I bought an iMac 27 "new retina (17.1 model) with 16 GB of RAM of factory. I have since decided to upgrade to 32 GB myself - but apparently not.

  I tried both levels of separate module of Crucial (both sticks 2x8GB, configured by using memory widget Crucial own the latter, so I think it was the 'right' RAM). Both times, after the installation, my iMac would not start. I get the kernel panic, then reboot after reboot goes no further than the Apple logo.

  Conjecturing that it must be a problem with Crucial RAM, I ordered two modules from OWC. This time, I realized an online chat with a Counsellor OWC just to make sure that the triple, I was getting the right modules.

  Result: same kernel panics, same inability to start. After you have uninstalled the aftermarket RAM my iMac works fine.

  And, Yes, I want to install RAM correctly (I did several times with previous computers that are much more difficult to upgrade). I also tried the papillotes in different slots (lots of combinations), switch reset PRAM, etc. etc. Nothing works.

  I wonder... all the stories of 'success' on Amazon and Crucial and OWC come people who completely REPLACE their factory in RAM with spare sticks? Seriously, I think that the issue is an incompatibility with the aftermarket RAM and the factory stuff. On the other hand, I am reluctant to throw 16 GB of perfectly good 'Apple' RAM just to open the four slots for 32 GB OWC.

  I know that Crucial has been (or is still) a provider of RAM to Apple, so this is really surprising.

  It is interesting to try to pick up sticks 'factory' (which will be costly, of course)? I believe that my 'Apple' RAM made by Samsung. Is there a reliable source for this?

  Or I'm doing something completely wrong? (Can't imagine what it would be. I've even been through a chat tech with OWC has nothing to help).

  In fact, I wonder if I now won't be able to max out my RAM (assuming I decide to eBay my Apple sticks and just go all new).

  Difficult for me to believe that the iMac is that picky about RAM...

  Thanks for the ideas.

  I do not have a 2015 end iMac, so I don't know if the problem which arose with iMac 2010 might be similar; before connecting a couple of these very long old threads, most of the problems was: the iMac 27 "would go happily with factory all the RAM, or with less of a mix of OEM and third party RAM (12 GB) max, but would have problems with 16 GB of third party RAM maxed out. I used to have a such 2010 and stayed with a total of 12 GB of RAM (OEM 4 GB and 8 GB of RAM from OWC) worked well.

  Problem with 16 GB on 2010 iMac 27 "i5 & i7.

  I7 memory issues new iMac 27 "2010

  Other than the usual suspects such as faulty RAM, RAM slot, or not seated correctly, if you have time, you might want to try to install unless the maximum - it is a shot in the dark, but...

• Satellite M200 does not start after the RAM 4 GB upgrade

  Hello

  I recently updated my RAM just to speed things up a bit as RAM is so cheap these days.
  I have a MEAC M200 T2130 Vista with 1 GB sticks (2 * 512).

  The new sticks are 2 * 2 GB Dane - elec DDR2 pc2-5300, when I put the two and restarted the hard drive light came briefly and then it is just options BIOS of Idol, no POST.

  I tried to use a single stick of 512 MB with two new sticks and they both work in a 2.5 GB configuration just not together that also this only works when the stick of 512 is in internal housing and not vice versa.

  So if someone has had a similar prob or can give me some advice that would be great, I'm not sure if the motherboard can support 4 GB?
  Thank you, Dave.

  Hello

  There are two possibilities why your M200 doesn't not start after upgrading RAM.
  First the RAM installed may be not compatible or could be faulty or the computer laptop doesn't support 4 GB of RAM.

  I put t know what M200 do you have exactly, but you can check the installed chipset and could check on the Intel page if this chipset would support 4 GB of RAM.

  Welcome them

• What kind of RAM (data sheet) is inside my HP Pavilion g7-1070us laptop? I could update the RAM.

  Every day, I use my cell phone and I like it a lot.  It's my only computer.  I think to upgrade the RAM to 8 GB.  What RAM specifications I shop for?

  Thank you.

  Mark KF8RV.

  Hello

  Your system has 2 slots module client-accessible/expandable memory that supports up to 8 GB of RAM ' DDR3/1333 MHz.

  Your system supports the following configurations:

  8192 MB total system memory (4096 × 2;)

  not supported on 32-bit

  operating system)

  Total 6144 MB system memory (4096 × 1).

  + 2 048 × 1; not supported on 32-bit

  operating system)

  Total system memory of 4096 MB (4096 × 1).

  or 2048 × 2)

  Total system memory 3072 MB (2 048 × 1).

  + 1024 × 1).

  Total system memory of 2048 MB (2 048 × 1).

  or 1024 × 2)

  Total system memory to 1024 MB (1024 × 1;)

  not supported on a 64-bit

  operating system)

  Look HERE for more information on how to replace the memory.