This configuration of the RAM is good?

Similar Questions

• Suggest the configuration of the RAM for Tecra A8

  Hi people,

  I want to increase the RAM on my Tecra A8 (PTA83L - 02 k 014) to 2 GB. Currently she is 512 MB. But I don't know what configuration of RAM (DDR/DDR2, speed in MHz etc.) should I buy?

  Please give me some advice. Also suggest me which are the best & reliable brands available in the market?

  See you soon!
  -Nitin

  Tecra RAM DDR2 support. Supoprted speeds: 400, 533, 667 MHz.
  I suggest you to buy 2 x 1 GB (memory equivalent 2 modul necessary to have dual channel mode) RAM DDR2-667. I currently using Venus Kingmax 2 x 1 GB (PC2-5400, model name: KSCD48F-A8KB5) without problem and the dual channel mode.

• This Configuration of the laptop will work for editing with Premiere CS4 ACVHD?

  Here are the specs that I have configured:

  HP Pavilion dv7t customizable Notebook PC
  

  EPP_00_XY757AV

  • black cherry
  • Genuine Windows 7 Home Premium 64-bit
  • Processor Quad Core of Intel Core i7-740QM (1.73 GHz, 6 MB L3 Cache) w/Turbo Boost up to 2.93 GHz
  • 1 GB DDR3 graphics ATI Mobility Radeon (TM) HD 5650 [HDMI, VGA] - for Quad Core Processors
  • 8 GB memory (2 DIMMs) DDR3 system
  • 1 TB 7200 RPM double hard drive (500 GB x 2) with Protection for hard drive HP ProtectSmart
  • No additional desktop software
  • No additional security software
  • Battery 6 cells Lithium-Ion battery (standard) - up to 5.0 hours +++
  • 17.3 "diagonal HD + high-definition HP LED BrightView Widescreen Display (1600 x 900)
  • Engravers Blu - ray and DVD SuperMulti burner
  • Webcam HP TrueVision with digital Microphone built-in
  • Intel 802.11b/g/n WLAN
  • Standard keyboard
  • HP Home & Home Office store other envelope

  I need a laptop to help with time I'll be traveling and need to get out the videos in the night.

  Thanks in advance for any help provided.

  Al

  Well, if I were to buy this model I would intensify the processor i7 - 2620 m for only $95, plus you get a helping hand from 2.0 GHz to 2.7 GHz.  CPU is the most important point for NLE.  If for any reason any you are not upgrading CPU, cut back on the graphics card to the GT 550 M

  How do you meet the minimum requirements of system Adobe Premiere of 2 hard drives?  I see that they offer a second option.  If you are sure that it does not require a Dell in car of the brand and that it requires no additional hardware to install it you might be able to do it yourself which would be a bit cheaper, but there are two risks I mentioned.

  Post edited by: Bill Gehrke

  Sorry I missed yout hard dtrive x 2 in the description.  I see that you are covered here.

• Configuration of the RAM to D10

  
  
  

• Help upgrade the RAM HP Pavilion n208tx

  Hello I have a model of HP Pavilion n208tx with one slot containing 4 GB 1600 MHz DDR3L SDRAM.

  I am the need for India to upgrade my system to 12 GB total RAM. Since I'm totally new to this sort of thing I need help regarding this.

  As I said, I want to improve my total RAM to 12 concerts, but I'm quite confused which one I should go for.

  I currently have with these options (I posted links for convenience):

  Crucial DDR3 PC3-12800 8 GB unbuffered NON ECC 1.35v 1024Meg x 64
  

  http://www.crucial.com/USA/en/scanview/444F50C031D926C3

  HP 4 GB 1600 MHz 1.35v to DDR3L SODIMM RAM

  http://www.Amazon.in/HP-DDR3L-1600MHz-SODIMM-laptop/DP/B00O48PQLW/ref=sr_1_fkmr0_1?ie=UTF8&QID=14160...

  Kingston 8 GB RAM LAPTOP 1600 MHZ PC3L (LOW VOLTAGE)

  http://www.Amazon.in/Kingston-laptop-1600MHZ-PC3L-voltage/DP/B00CQ35HBQ/ref=pd_sim_sbs_e_3?ie=UTF8&r...

  Corsair 8 GB DDR3L low voltage of 1.35v 1600 Mhz Laptop Memory SODIMM

  http://www.Amazon.in/Corsair-voltage-1600Mhz-laptop-CMSO8GX3M1C1600C11/DP/B00EHJ5U0K/ref=pd_cp_e_0

  These are referred to as shown on the Web sites.

  Can you please help me?

  Are the specifications above correct IE compatible with my system? Or if you find these misfits, it will be better if you could suggest some product according to the configuration of my system? 4 GB works perfectly as well.

   

  Thanks in advance.

  Hi oceane
  
  It will take time for me to look at the image it must be approved my moderators.
  
  The Samsung RAM that you now would be this I guess:
  http://www.Amazon.com/GP/AW/d/B00CV5GWHC/ref=redir_mdp_mobile/177-5507417-4516704
  
  No problem going in for 12 GB if you want to. But as I mentioned two identical RAMs have its own advantages.
  
  Both the RAM you mentioned in the previous post seems consistent. Check if there are 8 schools of black memory on the RAM (physically) - chip look at their pictures. Some have 4 banks of memory even if the configuration of the RAM you need may be the same - they work sometimes in some HP laptops (from various feedback in this forum).
  
  Concerning
  
  Visruth

• The RAM and HARD drive upgrade

  Hello

  I put my laptop, at level

  8.1 Windows 64-bit, Intel Core i7-4700MP @ 2.40 GHz

  Currently 12 GB of Ram - 8 GB & 4 GB Kingston DDR3

  Currently 1 TB Toshiba HDD
  http://storage.Toshiba.EU/CMS/en/HDD/computing/product_detail.jsp?ProductID=409

  I'm looking to upgrade the 4 GB of RAM to a 8 GB, I just don't know how many pins each room has. Any guidance where to find this without disassembling the machine would be very handy! -I think it's a 204pin?

  Also looking to add a second hard drive on my machine, what is the maximum size that can take this laptop? Ideally I'd like an another 1 TB HDD (same brand) than my current. Is this possible? Then the hard drives of 1 TB overprinting two system?

  EDIT: Is it possible to have the other as an SSD? Although that can't really benefits to have as a slave instead of a master drive.

  Thank you very much

  Dan

  Hello

  Manual - Page 2

  Plug

  RAM: Yes, 204pin SODIMM SDRAM desired. You can buy the memory stick to the exact configuration & preference even brand that is already installed on your computer laptop & listed in the service manual, so that it works correctly.

  Configuration of the RAM: 8 GB DDR3L 1600 MHz PC3L-12800 1.35v SODIMM SDRAM

  Run this tool to know the configuration & Details of RAM already installed.

  Page 51 details the procedure of replacement, fairly simple.

  HDD: According to the manual, it has double drive HARD support. You can put another 1 TB 2.5 inch 9.5 mm SATA HDD. You can buy additonal material of hard drive Kit (HP PRTs number: 720237-001) to install on secondary Bay for data storage.

  I would have preferred a faster 7200 RPM HARD drive with the cache higher like this , if you want more storage.

  Alternatively, you can replace the current HDD with SSD of similar form factor (2.5 inches SATA 7 mm or 9.5 mm thick) and make as boot drive by moving the drive toward SSD HARD integer before replacement & put old HDD to secondary storage Bay. SSD would defintely thrust upward performance drastically, but they are expensive - I would say worth the cost.

  Page 48-50 details the replacement procedure. Its relatively simple to do.

  Concerning

  Visruth

• -Event ID: 10 error 0 x 80041003. Events cannot be delivered through this filter until the problem is corrected. »

  Title: event id 10 original

  my PC (Vista Home premium SP2, 2 GB of Ram) is suddenly restart and get a blue screen. What can I do to fix this error? It is after 2 weeks after reinstalling windows.

  Here is the error message:

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be

  sent through the filter until the problem is resolved.

  -

  -

  10

  0

  2

  0

  0

  0 x 80000000000000

  2365

  Application

  Lory-PC

  -

  ./root/CIMV2

  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99

  0 x 80041003

  Hello

  1. Faced with this issue specific request?

  Try the methods provided below and check if the problem persists.

  Method 1:

  This problem occurs if the WMI filter is accessible without the necessary permissions.

  To resolve this problem, run a script to stop the event ID 10 messages.

  You can check the link below to solve the problem.

  10 the event ID is logged in the application log after you install Windows Vista Service Pack 1 or Windows Server 2008

  http://support.Microsoft.com/kb/950375

  Method 2:

  You can try to perform a startup repair if the system still hangs after trying this article.

  Startup Repair will try to repair startup issues in Windows Vista. To run the Startup Repair tool, follow these steps:

  (a) Insert the Windows Vista DVD into the DVD drive, and then restart your computer from the DVD.

  Note

  When you receive the prompt press any key to boot from the CD or DVD, press any key on the keyboard to restart your computer by using the Windows Vista DVD.

  (b) select your language setting, and then click Next.

  (c) select repair your computer.

  (d) select the installation of Windows Vista to be repaired, and then click Next.

  (e) under System Recovery Options, select the Startup Repair tool, and then press ENTER.

   

  Note

  If the repair process detects a problem starting in Windows Vista, it will run Startup Repair to automatically fix problems. If this happens, click Cancel, and then click view the advanced management and system recovery.

  (f) click Finish when the Startup Repair tool is completed.

  (g) under System Recovery Options, click on restart.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3:

  I also suggest you to run memory diagnostic tool to check if the RAM is good.

  To run the Windows Memory Diagnostic tool

  (a) click Start, click programs principally made and then expand accessories.

  (b) right click on command prompt and select run high on the shortcut menu.

  (c) at the command prompt, type mdsched.exe. If you are prompted, allow the action. You can choose to restart the computer and run the tool immediately or schedule the tool to run at the next reboot.

  (d) the Windows Memory Diagnostic runs automatically after the computer restarts. Windows Memory Diagnostic allows you to choose among three suites of tests of varying rigour.

• M420 blades - how to maximize the RAM?

  I have 6 of them in production now and have undergone a DIMM failure so far.  I am looking to buy 4 more with maximum RAM (192G).

  Using the online Configurator which tells me:

  M420 blade supports a maximum of 3 DIMMS with a processor or six 6 DIMMS with two processors.

  In order to get the 192 GB using the simple option provided by the website (16 GB DIMMS) I need 12, but the M420 contains only 6 DIMM slots.  What magic to cram 12sticks 6 slots?

  Or is the maximum of 196G just a lie?

  I test on the DELL CHAT to see if I can get a response.

  08:00:23

  System

  Connected with Treona Phillips

  Treona tells me that there is a DIMM 32 GB option that does not appear in the configurator.   Why?  Are not the DIMM 32 G bars in stock?

  Treona says she doesn't know why the part does not appear, but she could quote it.  OK, so this is.  I use an active agent to get this maximum configuration of the RAM.

• Creating notes to flow before the return of goods

  Hello

  Is it possible to create flow for the goods first notes and then return the goods to the vendor?

  Kind regards

  Rashita George

  Sorry, but I was on vacation

  I know isn't too late for this answer, but the answer is no, the maximum synchronization occurred when free billing (payment at the reception) is activated. with this configuration, once the store person receive the shipment from the vendor, the system generate invoice to pay, and in case of return, you will be able to check the checkbox "Create debit notes" in return form to auto create DM on how complete the statement of transaction provider (RTS).

  Please note that even with the auto billing is activated, DM is created after/to the transaction of the RTS and it is a healthy practice. Since you should not reduce your liability to the supplier until its goods still belong to you

  Concerning

• Configuration of the network on New Installation

  We recently expanded our install ESX and now would like to implement vMotion with our vCenter Server. I'm just trying to wrap my head around a good network configuration. Each server vsphere has 8 shared between the 2 cards network cards. Here's what I thought where a config, I need just comments if this configuration is good or not:

  • 0 - Service Console (on LAN) interface

  • 1 - VM LAN Access (on LAN) interface

  • Interface 2 - iSCSI (on dedicated iSCSI Switch)

  • Interface 3 - VMKernel (on dedicated iSCSI Switch)

  This configuration duplicate the second NIC 4 ports for failover or load balancing. This configuration works, or what I have to do anything? I went through a lot of technical documents and that is the conclusion I came to, but I want to make sure I'm not in the wrong lane before getting everything that the installer.

  vCenter has no access to the iSCSI network unless it has an iSCSI HBA or you will use an initiator of the host of VC software to access its own iSCSI storage - I

  case of the vmotion netwrok that there not to ride on the same network segment iSCSI - it will be enough to find on its own isolated network segment.

  peut

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Configuration of the ADF transactions

  Hello

  To understand how work the various operations of the ADF, so I created a demo application to try a few scenarios. There was some behavior not expected according to my understanding and expected behavior. If I put my findings here, hoping to solve the mystery of the transaction in the ADF or to improve my understanding. The post is long enough, but I tried to convey as much steps in detail as possible to describe what I did and what I observed.

  The requirements of the scenario

  1. 1. destination (see BTF) pages should never control a transaction
  2. 2 application should be able to scale up to 250 simultaneous users
  3. 3 edit task flow must be reusable to complex business processes

  Abbreviations Used

  1. 1. UETIP = use of existing if Possible Transaction
  2. 2 ABNT = always start a new Transaction
  3. 3 NC = no Transaction Controller

  Scenario 1

  Requirement: Display pages should not control a transaction

  Name of the workflow task	Setting of the transaction	Data control setting	Fragment used	AM using VO
  VIEW_EMP_BTF	UETIP	Shared

  allEmployees

  1. EmployeeAMDataControl.EmployeesView

  EDIT_EMP_BTF

  ABNT

  Isolated

  editEmployee

  1. EmployeeAMDataControl.EmployeesView

  VIEW_DEPT_BTF

  UETIP

  Shared

  allDepartments

  1. DepartmentAMDataControl. DepartmentsView

  EDIT_DEPT_BTF

  ABNT

  Isolated

  editDepartment

  1. DepartmentAMDataControl. DepartmentsView

  Nested used AM: No.

  Measures

  1. 1. menu item > > VIEW_DEPT_BTF
     1. a. active connections DB: + 1
  2. 2 menu item > > VIEW_EMP_BTF
     1. a. active connections DB: no change
  3. 3 VIEW_EMP_BTF > > EDIT_EMP_BTF
     1. a. active connections DB: + 1
  4. 4 edit used
  5. 5 VIEW_DEPT_BTF > > EDIT_DEPT_BTF
     1. a. active connections DB: + 1
  6. 6 edit Department
  7. 7 go to the tab edit used
  8. 8 commit used
     1. a. active connections DB:-1
     2. b. change visible in DB data
  9. 9 go to the tab Edit Department
  10. 10Department of rollback
      1. a. active connections DB:-1
      2. b. data unmodified in DB

  Conclusion

  1. 1. expects behavior that supports my understanding.
  2. 2 concern that edit BTF are isolated, which inhibits their reuse in the process of complex transaction.
  3. 3 a simple use case that uses 3 DB for a single user connections does not appear effective.

  Scenario 2

  Requirement: Display pages should not control a transaction

  Name of the workflow task

  Setting of the transaction

  Data control setting

  Fragment used

  AM using VO

  VIEW_EMP_BTF

  NORTH CAROLINA

  Shared

  allEmployees

  1. EmployeeAMDataControl.EmployeesView

  EDIT_EMP_BTF

  UETIP

  Shared

  editEmployee

  1. EmployeeAMDataControl.EmployeesView

  VIEW_DEPT_BTF

  NORTH CAROLINA

  Shared

  allDepartments

  1. DepartmentAMDataControl. DepartmentsView

  EDIT_DEPT_BTF

  UETIP

  Shared

  editDepartment

  1. DepartmentAMDataControl. DepartmentsView

  Nested used AM: No.

  Measures

  1. 1. menu item > > VIEW_DEPT_BTF
     1. a. active connections DB: + 1
  2. 2 menu item > > VIEW_EMP_BTF
     1. a. active connections DB: + 1
  3. 3 VIEW_EMP_BTF > > EDIT_EMP_BTF
     1. a. active connections DB: no change
  4. 4 edit used
  5. 5 VIEW_DEPT_BTF > > EDIT_DEPT_BTF
     1. a. active connections DB: no change
  6. 6 edit Department
  7. 7 go to the tab edit used
  8. 8 commit used
     1. a. active connections DB: no change
     2. b. employees data visible in DB change
     3. c. data Department change visible in DB
  9. 9 go to the tab Edit Department
  10. 10Department of rollback
      1. a. active connections DB: no change
      2. b. changes to the service as validated by committing the employee changes

  Conclusion

  1. 1. shouldn't the behaviour that supports the understanding
  2. 2 my understanding;
  3. a. from the view of different reference AM fragments that are not nested, they should both be instantiated as the root application modules and consume a DB connection, what they do, in fact
  4. b. fragments edit referencing the same AM.s as fragments of view then join these 2 separate operations of DB which, according to my understanding, control independent of the other transaction
  5. c. this should allow;
     1. a. only the changes to the employee to be committed
     2. b. changes Rollback of the departments
  6. 3 what really happened;
  7. a. the edit workflow completed two transactions
  8. b. Swapping sequence by opening first modify it Department BTF and then the Edit used BTF, change in workflow Department controlling the transaction

  Scenario 3

  Requirement: Display pages should not control a transaction

  Name of the workflow task	Setting of the transaction	Data control setting	Fragment used	AM using VO
  VIEW_EMP_BTF	NORTH CAROLINA	Shared	allEmployees

  1. HumanResourcesAMDataControl.EmployeeAM.EmployeesView

  EDIT_EMP_BTF

  UETIP

  Shared

  editEmployee

  1. HumanResourcesAMDataControl.EmployeeAM.EmployeesView

  VIEW_DEPT_BTF

  NORTH CAROLINA

  Shared

  allDepartments

  1. DepartmentsView HumanResourcesAMDataControl.DepartmentAM.

  EDIT_DEPT_BTF

  UETIP

  Shared

  editDepartment

  1. DepartmentsView HumanResourcesAMDataControl.DepartmentAM.

  Nested used AM: Yes

  Measures

  1. 1. menu item > > VIEW_DEPT_BTF
     1. a. active connections DB: + 1
  2. 2 menu item > > VIEW_EMP_BTF
     1. a. active connections DB: no change
  3. 3 VIEW_EMP_BTF > > EDIT_EMP_BTF
     1. a. active connections DB: no change
  4. 4 edit used
  5. 5 VIEW_DEPT_BTF > > EDIT_DEPT_BTF
     1. a. active connections DB: no change
  6. 6 edit Department
  7. 7 navigate to change employee tab
  8. 8 commit used
     1. a. active connections DB: no change
     2. b. employees data visible in DB change
     3. c. data Department change visible in DB
  9. 9 Department of rollback
     1. a. active connections DB: no change
     2. b. changes to the service as validated by committing the employee changes

  Conclusion

  1. 1. shouldn't the behaviour that supports my initial understanding, but after working in all scenarios, it might be expected behavior.

  
  Scenario 4

  Requirement: Display pages should not control a transaction

  Name of the workflow task

  Setting of the transaction

  Data control setting

  Fragment used

  AM using VO

  VIEW_EMP_BTF

  NORTH CAROLINA

  Shared

  allEmployees

  1. HumanResourcesAMDataControl.EmployeeAM.EmployeesView

  EDIT_EMP_BTF

  ABNT

  Shared

  editEmployee

  1. HumanResourcesAMDataControl.EmployeeAM.EmployeesView

  VIEW_DEPT_BTF

  NORTH CAROLINA

  Shared

  allDepartments

  1. DepartmentsView HumanResourcesAMDataControl.DepartmentAM.

  EDIT_DEPT_BTF

  ABNT

  Shared

  editDepartment

  1. DepartmentsView HumanResourcesAMDataControl.DepartmentAM.

  Nested used AM: Yes

  Measures

  1. 10menu item > > VIEW_DEPT_BTF
     1. a. active connections DB: + 1
  2. 11menu item > > VIEW_EMP_BTF
     1. a. active connections DB: no change
  3. 12VIEW_EMP_BTF > > EDIT_EMP_BTF
     1. a. active connections DB: no change
  4. 13edit used
  5. 14VIEW_DEPT_BTF > > EDIT_DEPT_BTF
  6. 15error: ADFC-00020: workflow "/ WEB-INF/flows/dc-transaction-edit-department-btf.xml#dc-transaction-edit-department-btf" requires a new transaction, but surgery is already open on the framework.

  Conclusion

  1. 1. not what I waited, but what I've been through since the previous, scenarios I can understand why this is happening

  Summary

  1. 1. for 250 concurrent users and efficient transaction handling requirement I need to set up the operation as follows:
     1. a. working view controller Transaction + isolated streams
     2. b. the edit to use existing if Possible Transaction + Shared workflow
  2. 2 this configuration for the number of concurrent users requires an initial 500 connections to database server configuration if each user opens the two use cases at the same time. As this might not be the only functionality provided by the application, I would need a very large number of database connections, who defeated my scalability requirement.
  3. 3 so of course, my understanding and approach might be incorrect.

  
  

  Concerning

  
  

  Leon
  

  Hi Leon

  Well, you made my Friday, it was fun to go back and explore all of these scenarios.  I'll emphasize again Bravo on writing your scenarios in detail, but clear, it contributes greatly to talk & study the problem and not spend time deliberating on the description of the problem that is so often missing on these forums (index other readers - you want to help, write better questions).

  To test the scenario 2 I built the following request on the HR database.  I joined this 11.1.1.7.0 so we could test for constant behavior in 11.1.1.7.0 and 12.1.2.0.0 by migrating to the top:

  https://DL.dropboxusercontent.com/u/12154176/TransactionsFun.zip

  (It is a temporary location, please take a local copy)

  You will notice to reproduce your scenario and work on what's happening:

  (a) I do not use the shell of the user interface.  The shell of the user interface makes it difficult just to its existence.  Generally whenever I get in a transaction number with the shell of the user interface, I rather to build an application with 1 page, 2 BTF incorporated as a region.  This simulates what the shell of the user interface attempts to reach without getting caught upward in discussions all about 15 tablets or the difference between browser tabs and the UI shell.  Ultimately the shell UI is just a region multi page.

  (b) on each fragment in the BTF, I've included output on internal information reveal for the Working Group:

  Name of the current task flow

  The current data from workflow to control scope

  Current transaction option task flow

  Name of the control framework the current data from workflow

  Current frame control task data stream attached the names of data control

  The current image name of control transaction workflow data

  Task data flow control current frame is dirty transaction

  Control of data data frame name control and attached names was very helpful in revealing what was going on.  If you run the example, look at the name DCF in these two areas and look at what data controls are attached to this DCF you will see same DCF is used depending on the region and the same AMS are grouped under this a DCF.  Thus a validation on a workflow commit the DCF and all the associated root bound AMs.

  Return therefore to scenario 2, the sample application that I conclude this framework is properly, because:

  As scenario 2 introduces a UTF DCF, DCF is then shared between BTF all because they all use a scope of control of shared data.  When you hit your step 1 then 2, the two root AMs are together under this a DCF.  The only way to prevent this is to use a data command isolated field.

  Remember, without worrying if the BTF existing Transaction option to use if Possible, use the AFM provides the transaction limits.  If someone commits the DCF (via say a workflow task back to commit), AMs all attached that DCF will be engaged as a group.

  So when in step 8, a valid user EDIT_EMP_BTF, considers the BTF (don't forget, you have visited EDIT_EMP_BTF to step 3 front of EDIT_DEPT_BTF in step 5) her in charge of the operation through the Transaction existing use if Possible flag and no other BTF launched an operation, commit the DCF about.  As this DCF attached several AMs roots, they are all we incurred, including any changes.  By your scenario happens you have just inserted a change in both your two AMS before validation is called, so why two records are saved in the database.

  It reminds me of the stream prematurely completed task scenario.  Conceptually our transactions present leaks beyond the limits of BTF even if we defined the transaction on the BTF options.  The key to understanding these limits is the DCF.  The key to controlling this behavior and the limit of transaction uses a range of remote data control.

  This may sound strange, but there are some fun things to see in scenario 2.  A better question would be why the 2nd BTF throws ADFC-00020 when the 1st task force has already started a transaction?  This is because the BTF is using the existing Transaction to use if Possible option which I refer as the "promiscuous" BTF transaction option.  When the 1st BTF arrives, on the DCF may not see a transaction on the frame, so it starts one.  Yet when the 2nd BTF arrives, he fortunately also leave a transaction on the frame, but he finds a already so it uses this transaction.  If you reverse BTF2 to always start a new Transaction, then you will see scenario 4.

  Once again remember the scenario 4, nested ams make no difference to the scenario.  When you declare a nested I automatically ignore the nested AM and paying attention to the AM root.  For all purposes useful AOS nested has no impact on the scenarios you describe here.  It exists as a concept of design time only.

  Hope it makes sense.

  I haven't had the time to check all the less 12.1.2.0.0, I hope I have some time next week.

  CM.

• Configuration of the DMZ R12

  Hi all
  
  I intend to configure the DMZ in my CA.
  
  Application: node 2
  Database: 11 GR 2 RAC
  OPERATING SYSTEM: AIX 6.1
  Application version: R12.1.3
  Using 1 Cisco hardware load balancer
  
  Query:
  I intend to go for the option "using hardware load balancing with no. external Web tier" I want to put my application server to the outside world.
  I intend to create vritual machine in Apps node 1.
  
  for this I need a separate queries or can I use the same load balancer used for internal application servers?
  All configuration changes what should I suggest you get out of the team for this configuration of the DMZ network?
  
  Please suggest
  
  Thanks in advance

  You can check the Option 2.5: using hardware load balancing with external No. layer Web of MOS note:
  Oracle E-Business Suite R12 Configuration in a DMZ [ID 380490.1]

  You can also view the part of Cisco for hardware load balancer
  Implementation of load balancing across Oracle eBusiness Suite - Documentation specific Load Balancer Hardware [ID 727171.1]
  Thank you

• Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• mouse works does not, his hang.its showing me the error like this. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).

  I recently installed a graphics card for GTA 4, his work properly.bt yesterday my screen crashed it mean clear.when I started in safe mode then it is appeared correct.afterwords all of a sudden my mouse kick & stopped then I uninstalled graphic card.cause of this my connection net failed.plz help me & give me good solution.i have window xp.

  Hi DineshKaria,
  
  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.
   
  Follow the suggestion in the article given below for code 19 and check if the problem is resolved.
  Explanation of error codes generated by Device Manager in Windows XP Professional
   
  Additional reference on:
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged