The RAM and HARD drive upgrade

Similar Questions

• Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive

  Hi all

  I have a Satellite L70-A-139 youcef.
  And at the back of the laptop, there is a cover that is fixed with a screw.

  Wil I void the warranty when I unscrew and take a look?
  I want to upgrade my HDD to SSD.
  The motherboard supports Sata III: D.

  Thank you!

  No, the mandate must still be valid.
  There is a removable cover at the bottom of the unit as shown here:
  [Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]

  Then you should be able to upgrade the RAM and HARD drive.
  I think this info should be mentioned in the user manual too.

• Portege 7220cte: I want to move the RAM and HARD drive

  Hi all...

  I read on the internet that the 7220cte is particularly picky about his type of RAM.
  I want to improve it with an extra 256 MB. (From what I have found he needs a 16chip of low-density extra-flat 144pin sdram PC100 16 x 8)

  I can't figure out if it's just the PA3051U that is compatible or PA3069U is good as well (seems to have the same features, but its a little cheaper)

  http://UK.insight.com/apps/Productpresentation/index.php?product_id=KTEA020E2&cm_mmc=Froogle-_-E3-_-KT-_-KTEA020E2&src=FRO1
  And it will be good for example?
  http://www.laptop.co.il/products/41331

  How does one know if she has available to low density 16 x 8 or another, if she did not mention the specs? they say only PC100 256 MB Sodimm...

  I found a few PDF Toshiba with the list of the original expansion, only the PA3051U was listed... that's why I got scared.

  Also I would like to add a hard drive, nobody knows if a drive of 80GB 2.5 "will be compatible with the bios... ?

  M a n y t h a n k s...

  Hello

  First of all, please note that the Portege 7220CTE memory can be improved up to 320 MB. The laptop supports the 64 MB internal memory. This type of memory is fixed and cannot be removed or upgraded.

  There is only one slot for expandable memory, and you can put max 256 MB module.

  I found this site which provides the module for Portege 7220CTE specifications:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5388&ft=m&St=3

  As you have already said that the laptop takes supported modules SODIMM 144 pin PC100 and in my opinion each strip memory SODIMM 256 MB 144-pin PC100 must be compatible.

  Hello and goodbye

• SL 410 Upgrade ram and hard drive

  Hi all

  I have been using the 410-2842-rk1 model Lenovo thinkpad SL for a year and a half.

  No problems until now

  I want to upgrade the RAM and hard drive of this machine.

  At the time of purchase, I had seen that I could improve up to 1 TB of hard drive.

  Please guide me if I can or not.

  About the RAm too, I need assistance (maximum limit I can update)

  Thanks in advance...

  You can switch to a 1 TB HDD providing it will fit physically. They are more hard are 9.5 mm thick but some hard drives of 1 TB are 12.5 mm thick. If you get a 9.5 mm HARD drive then it will work. Readers of 12.5 mm is too thick to fit.

  Regarding the RAM, you can install up to 8 GB of RAM, which is 2 x 4 GB.

• 23 - f270: RAM and hard drive one device?

  Hello

  I had recently a hard drive has failed/bad in my computer that was just out of warranty, so I took my computer to a computer repair man who said he could replace the old/bad disk with a new one.  This man didn't really hold up to the end of his contract, and now I find myself in a dispute with him as he always has my HP PC and he gave me a lesser Dell as if to replace.  Now, I contacted the office busniness better for resolving this dispute.  But it is now trying to claim that he gave me the HP drive hard and RAM unit.  This man gave me was a rectangular metal box telling me that it was the old bad hard drive.  So what I need to know is are the hard drive and RAM in this a model room?  I need proof that if the RAM is not present, he was the one who pulled it and sold it.  They only gave me one of the components of the computer, and I would like to know if the RAM and hard drive are one or two pieces of sepearte?

  Thank you

  Hello

  RAM and hard drive (HDD) are two different things. Your machine has 6 GB of RAM, which means it has 2 sticks, and 1 TB of HDD (1 unit). His record:

  http://support.HP.com/us-en/document/c03801226

  Kind regards.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A1103 new Ram and HARD drive will not start

  Hello.

  I have a Mac mini A1103. When I got there the folder flashing with question mark. I got a macbook earlier where this problem was solved by installing a new hard drive. so I ordered a new 160 GB IDE 2.5 "5400 RPM and 1 GB Corsair Valueselect DDR1 333 MHz hoping that this will help me get the mini running and preforming a little better with 512 MB of Ram.

  When I boot the mini after swapping ram and hard drive I always see the same flashing folder. I can reset the NVRAM Boot, enter diskmode target? (I think) and the Boot Manager.

  When I enter the Boot Manager I can see the following screen

  

  a few times I get to this screen for Open Firmware screen where I can use certain commands such as vram-reset reset-all rebot and so, but sometimes I'm just stuck on this screen.

  Anyone have any suggestions on what is wrong and what I can try next? I do not have the boot original dvd but I have a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original) but I can't get botting from any of the devices.

  A Mac Mini A1103 has a G4 Power PC processor and cannot be greater than 10.5.8. Superior OSX versions require an Intel processor.

  In this statement "a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original)" I think you mean OSX, not of iOS. You must obtain a copy of the original installation disc which was 10.3 or 10.4 or disk to upgrade to 10.4 or 10.5 full retail. Coverall A1103 all three 2005 models of the Mac Mini G4.

  You cannot use a grey disc unless it was delivered with your specific Mac.  Native gray disc with Macs and can not e used on the other model of disc.

  You can probably call Apple and order a copy of the original disks

• Satellite A50: Question about type RAM and HARD drive

  Anyone out there who would try to open their laptop Toshiba Satellite A50, what type of RAM and hard disk of brand you all have inside?
  All the portable toshiba comes with Toshiba RAM and hard drive?

  Hello

  As far as I know the Satellite A50 uses DDR PC2700 modules. These modules must be compatible:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  There are different models of Satellite A50, but I think that there should be a drive HARD IDE(ATA-6) 60 GB 4200 RPM with 8 MB buffer size.

  Here is all the information I found.

• Update of RAM and hard drive for Compaq 6710 b

  Hey guys,.

  I had Compaq 6710 b and I'll update my Ram and HARD drive on it with these (link here)

  On the system view, it says memory: 1.99 Gb and the Crucial site gives these details:

  Maximum memory: 4 GB
  Slots: 2

  But I looked under the hood of the ram and only thing I saw was a simple location with stick of 1 GB (below Sorry for bad quality and light photos)

  http://i.imgur.com/F0MKO.jpg

  http://i.imgur.com/VgNGy.jpg

  http://i.imgur.com/0TCci.jpg

  So then it just a single cell phone location? And I can buy a 1 x 4 GB DDR2 ram stick?

  Thank you

  Hello

  The second site should be under the keyboard. The following book tells you where and how to access:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02834030/c02834030.PDF

  Kind regards.

• NB550D - replace the RAM or HARD drive without voiding warranty?

  Hello!

  I noticed, that generally, Toshiba users replace their HARD drives and RAM memory without voiding the warranty.

  But I'd be happy to get official confirmation if NB550D netbook.
  Can I pass without problem, my material in this model?
  If it is relevant, I'm of the Poland.

  Thank you in advance!

  Hi dude

  Since it is only a user to user forum you will get no official confirmation here
  But you're right. The RAM and HDD Upgrade or replacement will not void the warranty.
  These pieces are extensible, and as much as I know that is mentioned in the user manual.

  Greetings

• G6 1201tx: hp pavilion 1201tx g6 want to level of ram and hard drive

  I have a hp g6 1201tx with a faulty 640 GB hard drive
  
  I want to spend the 1 TB hard drive
  How can I do?
  Can I upgrade the ram and graphics card
  
  Please tell in detail im a noob
  
  Thnx in advance
  Help, please

  moniqueasconi wrote:
  Which hhd 1 TB should be the best for g series 1201tx.?

  Hello

  Fast, great spin hides. My suggestion: use the same brand with the existing HDD (normally Toshia or Hitachi)

  Kind regards.

• HP touchsmart 300-120: the replacement and hard drive and memory

  Hello

  I get the error message "bootmrg is missing. I have tried everything to solve this problem and finally told me that I needed to replace the hard drive. Since I have to replace it, I want to upgrade. I would like to know what the greatest memory and hard drive, I can go for this model... HP TouchSmart 300-1020.

  Thank you

  Good to hear that diagnosis proved to be positive.  You just saved yourself some time and money.

• HP Pavilion 17 j7b57av: need of repair to install the memory and hard drive

  How can I access my memory and hard drive to add memory and upgrade to a larger disk?  I do not see on the bottom cover access ports, which suggests low overall coverage needs to be removed, but there is always something that is in the manual of th, and I can't find a service manual.

  Please click the links provided which might come handy below

  http://h10032.www1.HP.com/CTG/manual/c04402649

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Cursor flashing at the start of the system and hard drive not working do not on the other computer

  Original title: I need help with my Hardrive

  Recently I had problems with a hard disk of computers. So I'm going to give guys the full story, I fell on this computer, it's actually my mums computer and it had a blue screen at startup error. I'm sorry, but I don't remember that the error was called on the top of my head, basiclly I quikly searched online and alll they say should use fixboot. So I did and the computer booted Windows XP very well. So the next day, when I was starting the machine (just to let you know, it would be the first start since I used fixboot, other than the right after that, I don't know if it would make a difference).

  In any case, while trying to start, there was just a slider, or as underscore that retain just flashing in top left corner. I thought that maybe I should reinstall windows on another partition so my files would be safe. I did it, the installation program had no problem with it, but when I booted up I got the same line of flashing underscore / cursor in the upper left corner.

  I thought that maybe I should back up the hard drive using my other computer so I tried to plug in the hardrive in my work computer and the hardrive started to heat up and as if it worked but any hardrive was getting into my computer, I refreshed it, started the computer upward once again, nothing.

  So my question is what is the problem with this hardrive and how I save? I'm ready to do anything, use the live CD, using another computer. I have precious moments of family on the hardrive.

  Thank you guys

  Hi Joemost,

  As you have important data on the hard drive. We recommend that you contact the vendor of hard drive to diagnose hard drive or visit the nearest tech store to save your data.

  There are chances that the boot files are missing on the computer and also you could have not connected the hard drive as a slave when you connected to the other computer. Once you have saved the data, you can repair the existing windows and check if it starts successfully.

  Try these steps to repair install Windows XP:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Organizer delete the catalog and hard drive?

  I take multiple pictures of the same thing with the intention to keep only one. How can I delete the ones I don't want to catalog and hard drive using Organizer?

  charlesp73927950 wrote:

  I take multiple pictures of the same thing with the intention to keep only one. How can I delete the ones I don't want to catalog and hard drive using Organizer?

  You highlight the files to delete (Ctrl-click to select) and simply press the delete key. You get a dialog box with a check box to specify whether you want also deleted from the disk.