Configuration of the SDK software problem

Similar Questions

• QNX IDE cannot find any update of the SDK software for download

  Hello

  I just installed the 10.1.0.1020 native SDK on a new PC in Windows 8. But when you try to update the native SDK, I get the message "There are no new SDK updates" and the list is totally empty, see screenshot.

  Problem solved. Installed the SDK again, but this time I used the default c:\bbndk directory and everything works fine. For the first installation, I used c:\BlackBerry\bbndk which works on another PC without any problem.

• BB link for the blackBerry software problem

  I fortunately made the link between Contacts and calendar every day for the last two or three months, but it has suddenly stopped working. I now get a message saying "Synchronization failed" and the Sub Show recent activity, he says 'Impossible to deal with organizing data. I have not changed my settings and logged. Any suggestion would be appreciated.

  Generate you a newspaper, find and then delete the entry of problem as they say in the link I sent or have you, update your BB link?

• How to get the SDK software InDesign CC

  Hello

  I need help in obtaining InDesign CC SDK. On the page http://www.adobe.com/devnet/indesign/sdk.html there is the following text:

  "To request access, please click on the link below and fill out the registration form.  Once this registration form is completed we will evaluate your application and successful candidates then give access to the SDK. The deadline for the approval process is one week. »

  , But after clicking on the link, I get redirected to the site " " https://www.adobeprerelease.com/ ' with the message "No. available programs".

  Is there another way to download InDesign CC SDK?

  Hi Vadim,

  You will probably have a response from someone at Adobe (but I'll still stick my two cents)

  As far as I know, the process to get the SDK you follow is correct, but they just closed all programs pre-release and opens on a new platform.

  It seems that not all of them have been transferred through yet, and the InDesign SDK is one of the tail enders.

  I had access to the SDK program and it seems to be cut being transferred, so I guess everyone is in the same boat.

  (so far as to pay... then again, you are likely an answer from someone @adobe, but I don't think that there is a direct link between being pay a partner and to have access to the program SDK.) However, to take full advantage of the SDK, it is really convenient to be able to track through in the debug version of InDesign. Who was limited access to partners, I think always it is... you might be able to access the program from pre-release InDesign... who knows? You can always ask!

  Best

  Caerwyn

• I have a problem with the SDK software Webworks 10

  Containing game in extension (HTML - CSS - Javascript - SWF) files
  After the compilation of the source using SDK 10 WebWorks
  Found the part that contains the flash file does not work correctly
  The error showed a text on the screen of the phone
  But the rest of the files works well
  the problem only in the swf file
  Knowing that even this source served with WebWorks Playbook but functioning at peak performance
  How can I solve this problem.

  Engineer: Eslam Mohamed

  In the config.xml file, you need this

• Configuration of the Airport Extreme problem and Vigor 120

  Hi all

  This is the case, I have vigor installation 120 in Bridge mode with my airport extreme with settings pppoe settings of my ISP of vpi/vci: 8/35 pppoe/llc adsl2 + login and password, when the force as a router configuration, there worked perfectly, but in Bridge mode has managed to establish a PPPoE to pc but when the connection with the airport no luck I got an invalid ip address and orange light flashing.

  I have the latest in airport and vigor firmware and I'm doing a powecycle reboot after each change.

  Here are the settings in effect 120

  

  

  Any help would be more than welcome

  It's sad to say THAT PPPOE on the Apple is not reliable.

  I have the same problem... I can't use routers Apple with PPPOE on my modem in bridge... regardless of the brand.

  PPPOE is a bunch of variations... PAP or CHAP for example... and the number of... repeated attempts time between repetitions.

  Apple offers zero... whether it's no control... they are all available right now to find out what newspapers or.

  I had to simply replace the Apple router with another router... any other router seems to work fine... It's just the Apple that failed on me...

  I tried with several different Apple routers using all the old firmware, at latest... all fail. So I guess it's less coherent.

• Installation/launch of the TurboTax software problems.

  Having trouble installing the software TurboTax.  It will install and then when asked to run it I get an error stating microsoft ' Turbo tax has encountered a problem and needs to close.  We are sorry for the inconvenience. "Passed the error reports, I don't know how to fix it.  I have already contacted Dell and Turbo tax, and both State this is a Microsoft problem.  I've never had a problem in previous years, try to install the software.  Help, please!?!

  Hello DonnaRE,

  See the article of TurboTax:
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/GEN12454.html

  It should help with your problem.

  Thank you

  Marilyn

• Backup of the blackBerry software problem

  I can no longer save my Z30 (Verizion, 10.2.1) using the link to Blackberry. It doesn't matter if I choose quick, complete or custom, it does not work. I use Windows Home Premium 7.

  I unsintalled completely bind a number of times. I tried to turn off wifi. I made sure to run as administrator. I waited.

  Is there a way I can find the ability to backup. I have now installed mixture (although I tried with installed) because Verizon has yet to update their operating system.

  Any help is very appreciated.

  I finally found a little time to check things. I had noticed that my memory of phone system was relatively low, but did not really have the time to investigate on (or did not want to take the time). Then, after a few more failed backups (after resets, new, USB cord different, with things or turn off), I looked in the Monitor/Storage Device. Then, I noticed that some applications were huge. My WSJ application was worth about 1.5 GB. But many applications have been taking a lot of space, too. I tried to clear the caches when it is possible, but a deletion (and a future relocation) was easier in most cases.

  I then pulled upward link and was able to make a quick backup. I don't have time to make a bigger, but I hope it will be able to try tomorrow.

  So my advice is (after you've done any other recommended) you check the phone memory and remove a little to free things, if you are close to the limit. It might work.

  With the back-up of the road, 10.3.1 will soon at hand... Verizon, learned to love EM.

• Several Airport Apple ID devices disappear shared devices and Software Configuration of the airport

  We have three Airport extreme and two Airport Express devices in two offices in the city.  Some time in the last two days, they all stopped appearing in the sidebar of Finder 'Shared' category (if they had attached disk storage) and they stopped from appearing in the Configuration software of the airport on any of the Mac on these networks. (They always seem to be correct, routing traffic, however).

  For a while, we left a desktop completely alone as a control group and did all our testing and troubleshooting in the other office.

  We-hard reset (to the factory configuration) all devices from the airport to an office. They began to appear again. Then we started to re - configure them again.  At the time wherever we had updated the devices they had disappeared again.

  So, another factory discount based configutations for each device to this facility. Then we added slowly in pieces of their configuration.  When airports have received Apple ID and associated passwords for associating with iCloud/BackToMyMac/WideAreaBonjour (depending on what you want to call it), the airport devices disappeared from the airport Setup.

  If we tried to configure another device from the airport to extend a network of 'invisible' airports, the new airports were "unable to find" one of these networks to expand.

  If we reset all devices without providing them with Apple ID and passwords, they worked mainly as you would expect. The main difference being now do not appear as having been recorded as BackToMyMac/WideAreaBonjour devices.

  One side for people dealing with this note: If your router are invisible, but they are configured to be configured from the EXTENSIVE worldwide network, you can use "File-> configure the other" and specify the address WAN of the missing aircraft and get this screen access as one would generally. From here, remove all the Apple ID associated with these devices, press "Refresh" to save the settings and they seem to reappear magically in the Configuration of the airport software.

  In that State, storage seems to be available, but only for devices in Domain Local (direct connection). Airports without AppleIDs will not appear in the field to iCloud/BackToMyMac/WideAreaBonjour, and it's as expected, given that these IDS is the means for the identification of their field.

  If someone else has noted these behaviors and if so, have an idea about specifically when they first appeared? Is there by any chance someone who knows of any change in registration or the MWAC of multiplication?

  Did you approach the problem exactly as I did in the past, and having encountered problems of the CCMM literally every version of OS X. They were all distinct problems with individual characteristics, and in some cases the solutions exist. Having said that the CCMM has been completely reliable recently - which means running the most recent El Capitan release on all my Macs. The initial versions (i.e. OS X 10.11 to 10.11.3 maybe) didn't work at all. I don't know which version fixed whatever the problem was, I am sure he has not worked for someone else.

  The same real place with Yosemite and previous versions as well. CCMM did not reliable until the exit "point three or four."

  Through these experiments, I believe it should be a pretty fast connection. If the connection between a Mac and all the others does not meet this requirement (whatever that is) all you will be able to determine, it's that the CCMM fails.

  Apple is characteristically silent about the technical aspects of the CCMM, probably because of security concerns. Nobody outside Apple knows how it works. If you're still having problems, I encourage you to contact them. After mentioning predictable you corrective raw materials (the two following links) you will be put in touch with someone who will look to what is false, providing diagnostic assistance and send your information to engineering. If it's something they should fix, you'll know not to the point of an OS X update is published.

  Set up and use Back to My Mac - Apple Support

  Get help using Back to My Mac - Apple Support

  With all the conversations I had with Apple on this topic (which were many, involving a large amount of tests) not once they disclose any causal factors individual, other than to reiterate the need to run the last OS X, versions and the latest versions of firmware for their routers. In your case, that means probably that your Mac update to El Capitan. It is after all the very first recommendation in their document of support above, until you do this you will still not get in step 1.

• ATTENTION: the SDK update prevents the creation of a new project

  
  

  OK, after trying many other attempts to work out what is the cause I gave up and reinstalled from lastest gold then updated.

  Guess what works now, it's a real pain if I have to do every time the SDK software updates.

  I hope someone at RIM will study closer one day.

• Newbie question: Multiples of the SDK & Plugins by install Eclipse?

  Hello

  Please excuse if this is a stupid question, but I'm new to the development of BB.

  Can I have several versions of SDK and plug-in installed in one Eclipse install?  I understand that the latest version of the SDK requires the latest version of Eclipse, but if I want to develop features in 5.0, 4.7,4.5 BB, etc, don't I need a different IDE installation for each version of the SDK software/Plugin or can they co-exist?

  Thanks for your answers,

  Jose

  Hello

  You can develop using BlackBerry Java plug-in for Eclipse 4.5, 5.0,4.7,4.6 and bb 6.0 applications.

  To download the BB Java plug, use the link below and download them later plug (ver. 1.3).

  http://us.BlackBerry.com/developers/javaappdev/JavaPlugin.jsp

  By default, you can develop some app for 6.0, for earlier versions, you need to download the SDK, in this precedure,

  Open Eclipse IDE<>

  http://www.BlackBerry.com/go/eclipseUpdate/3.6/Java

  Add the above site and name it as "Update for the Blackberry sdk".

  all software development kits and select Download.

  If you think that this information is useful, give Kudos

• Where is the SDK version?

  I downloaded the server version of Mosaic and it starts fine.

  However, I need to install the SDK. It is said it is included in the distribution list, but the single file was the pot to start the server.

  In previous versions, I always needed to install the SDK software and documentation seems to indicate that this is no different.

  http://help.Adobe.com/en_US/enterpriseplatform/10.0/InstallDEP/WS0b373c8e7f652f14-67f2af34 1302748b0c9 - 8000.html

  But I can't find an SDK released for DL anywhere, where is it?  Should I just use the sdk are-sdk-pkg - 1.0.186 the prelease version I have?

  Also I noticed there is no update of the tooling on the 1.0.44 eclipse plugin, is that correct?

  Lee Burch

  You must follow the instructions in "Install ADEP experience Services", specifically "5 samples and deploy Services SDK experience" (well, actually 5.2 and 5.3)

  5.2

  1. Go to http://[host]: [port] and connect using admin/admin as user and password name.

  2. Click Sharing of Package and sign in with your username Adobe ID and password.

  3. Select packages > Public > Adobe > Digital Enterprise Platform > 10.0 > Products.

  4. Click download next to the packaging of -sdk-pkg - 1.0.XXX.zip .

  5. Click download next to the packaging of -samples-pkg - 1.0.XXX.zip .

  5.3

  1. Go to http://[host]: [port] and click on packages. The Package Manager opens.

  2. Click install next to the downloaded package -sdk-pkg - 1.0.XXX.zip .

  3. On the confirmation screen, click install . Once installation is complete, a message appears in the activity log pane.

  4. Return to the screen of the Package Manager, and then click install next to the downloaded package -sdk-pkg - 1.0.XXX.zip .

  5. On the confirmation screen, click install .

  -Janice

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• Error: "Windows cannot start because of a configuration of the disk of the computer problem" in computer Dell Dimension 2400 Windows XP startup problem.

  Original title: problem starting on a Dell Dimension 2400 - how to set up the drive with a keyboard.

  I have a Dell Dimension 2400 with Windows XP, start, he can't go to the home screen, so I can't use the suggestions to start right click.

  The error message indicates "Windows did not start because of a configuration of the disk of the computer problem".
  "Cannot read disc startup selected." check material stand of disk and the path.
  How to set up or fix this problem with a keyboard

  Hi MarieButler64,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you