Backup of the blackBerry software problem
I can no longer save my Z30 (Verizion, 10.2.1) using the link to Blackberry. It doesn't matter if I choose quick, complete or custom, it does not work. I use Windows Home Premium 7.
I unsintalled completely bind a number of times. I tried to turn off wifi. I made sure to run as administrator. I waited.
Is there a way I can find the ability to backup. I have now installed mixture (although I tried with installed) because Verizon has yet to update their operating system.
Any help is very appreciated.
I finally found a little time to check things. I had noticed that my memory of phone system was relatively low, but did not really have the time to investigate on (or did not want to take the time). Then, after a few more failed backups (after resets, new, USB cord different, with things or turn off), I looked in the Monitor/Storage Device. Then, I noticed that some applications were huge. My WSJ application was worth about 1.5 GB. But many applications have been taking a lot of space, too. I tried to clear the caches when it is possible, but a deletion (and a future relocation) was easier in most cases.
I then pulled upward link and was able to make a quick backup. I don't have time to make a bigger, but I hope it will be able to try tomorrow.
So my advice is (after you've done any other recommended) you check the phone memory and remove a little to free things, if you are close to the limit. It might work.
With the back-up of the road, 10.3.1 will soon at hand... Verizon, learned to love EM.
Tags: BlackBerry Smartphones
Similar Questions
-
BB link for the blackBerry software problem
I fortunately made the link between Contacts and calendar every day for the last two or three months, but it has suddenly stopped working. I now get a message saying "Synchronization failed" and the Sub Show recent activity, he says 'Impossible to deal with organizing data. I have not changed my settings and logged. Any suggestion would be appreciated.
Generate you a newspaper, find and then delete the entry of problem as they say in the link I sent or have you, update your BB link?
-
Install any software or blackBerry software problem fix
I have this problem. recently my phone does not seem to connect with my pc. I used. There is no other major facilities or something else
When I opened the Link BB software, it says that there is an update
so to put in place the new update, the installer says there is an error: the account already exists
so I tried to uninstall the software. the same problem.
I downloaded the latest version and tried to install it there. the same problem.
now when I try to repair the software, he seeks the .msi file from the version, I did not.
I'm trying to repair the 1.2.3.23 version and update to the latest version 1.2.3.55
Please can someone give me a solution to this problem. I really want to connect my phone to my pc to access files
No do not touch the registry, using Windows Search (Advanced) and research (Everywhere) enter (blackberry) in the search field, find and delete all the files in the blackberry except those in your Documents that you want to keep or delete those also.
Turn off your computer, not reboot, Power On, wait 5 minutes and then install the final link of BB:
Do not delete the installation program, keep in the folder you downloaded to and do not change the location of the folder after the installation.
If you want to keep the Setup program in a folder of your choice or a newly created file download the Setup program in that folder.
-
Windows 7 installer does not happen with the Blackberry software
Running windows 7 ultimate 64-bit
When you install Blackberry Desktop manager or device software or print to go I following after usual unpacking and choosing msg usa (eng) > can someone tell me what is happening this... Please helpWindows® Installer. V 5.0.7601.17514
msiexec/option
[optional parameter] Installation options
Installs or configures a product
/a
Administrative installation - installs a product on the network
/j[/t ] [/g ]
Publishes a product - m for all users, allows the current user
Uninstalls the product
Display options
/ quiet
Quiet mode, no user interaction
/ passive
Automatic mode - only progress bar
/ q [n | b | r | f]
Sets the user interface level
n no user interface
b Basic UI
r reduced UI
f-full UI (default)
/ Help
Help information
Restart options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user to restart if necessary
/forcerestart
Always restarts the computer after installation
Logging options
/ l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
i status messages
w warnings recoverable
e-all error messages
a startup of actions
r registers of the specific action of the
u user requests
c initial UI parameters
m out-of-memory or fatal exit information
o disk out-of-space messages
p - Terminal properties
v performance
x extra debugging information
+ - Add to the existing log file
! -Flush each line in the log
* - Log all information, except the x and v options
/ log
Equivalent of / l *.
Update options
/Update [; Update2.msp]
Apply updates
/ uninstall[; Update2.msp] / package
Remove the updates of a product
Repair options
/f [p | e | c | m | s | o | d | a | u: v]
Repairs a product
p only if the file is missing
o If the file is missing or an earlier version is installed (by default)
e If the file is missing or an equal or higher version is installed
d if the file is missing or a different version is installed
c If the file is missing or checksum does not match the calculated value
has all the files to reinstall the forces
u all (default) user-specific registry entries
m all requirements (by default) computer-specific registry entries
s all (default) shortcuts
v-runs from source and recaches local package
Setting public properties
[PROPERTY = PropertyValue]Consult the SDK Windows® install to get additional documentation on the
command line syntax.Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093What help is available from Blackberry.com?
How to perform a clean reload of the BlackBerry Device Software for Windows
http://BTSC.webapps.BlackBerry.com/BTSC/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=KB11320&sliceId=1&docTypeID=DT_SUPPORTISSUE_1_1Solution Center technology blackBerry
http://BTSC.webapps.BlackBerry.com/BTSC/microsites/microsite.doGeneral Support Forums
http://supportforums.BlackBerry.com/rim/ -
Hello
My Blackberry Curve 8520 I just "App Error 523".
Whether the bust means that I have to do a FACTORY RESET, but I was wondering how to do this without using the Blackberry Desktop software?
I wonder if the blue keys inside Blackberry anything on this subject.
What blue keys inside?
You'll need a Windows PC. Period.
(1) make sure that you have Blackberry Desktop Manager installed.
http://NA.BlackBerry.com/eng/services/desktop/
(2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):'c:\program files\common research in motion\apploader\loader.exe' /nojvm
(3) the Application Loader Wizard will appear - click on "next".
(4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
(5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Congratulations! Just unplug and let the process finish completely.NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
BlackBerry Device Operating System downloads: http://www.blackberryforums.com/blackberry-device-specific/
Simply select the model of the device in the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.*****************
IF the above does not work or help, you need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:Download JL_Cmder http://www.blackberryforums.com/rim-software/18789-jl_cmder.html
or download BBSAK http://bbsak.org/download.phpIf JL_Cmder does not work, you can try this:
KB10144, http://www.blackberry.com/btsc/KB10144
and this: KB20371 http://www.blackberry.com/btsc/KB20371Additional information:
http://www.BlackBerry.com/BTSC/KB24395 "Error 523", "App Error 523", or "JVM 523" is displayed on the BlackBerry smartphoneItem number: http://www.blackberry.com/btsc/KB10144
KB10144 how to force detect the BlackBerry smartphone using the Application Loader -
Backup of the address book problem
I have been using Apple AddressBook since its launch. I recently started having problems with good backup. Normally, I backup every day, and it's really quick like less than a minute. The last few weeks it takes "forever" at the end of backup. I can do other things while AB is the support up and finish that takes me an hour or more and it is not always done. I tried a few times to just stop smoking it and then there is '0' for the size of the file or it ends really huge. If I let it go until it ends it is 'normal size' as it used to be when it took less than a minute for the backup. Any ideas?
You only back up address book or you back up all your data? How do you back up?
-
Installation/launch of the TurboTax software problems.
Having trouble installing the software TurboTax. It will install and then when asked to run it I get an error stating microsoft ' Turbo tax has encountered a problem and needs to close. We are sorry for the inconvenience. "Passed the error reports, I don't know how to fix it. I have already contacted Dell and Turbo tax, and both State this is a Microsoft problem. I've never had a problem in previous years, try to install the software. Help, please!?!
Hello DonnaRE,
See the article of TurboTax:
http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/GEN12454.htmlIt should help with your problem.
Thank you
Marilyn
-
BlackBerry software problems sync Z10 and new computer.
My BB Z10 has many contacts, none of them in the «Local Contacts» account This is to avoid duplicates, I only have my contacts on the BB link account that I use to synchronize with my desktop Outlook. Now, I have replaced the computer and only have contacts on my device.
When I tried to sync with my new computer, it is what is happening. BB link creates a new account link (named after my computer) BB for synchronization. And because there is nothing in this new account and nothing on the computer, no contacts Sync. Apparently the BB link synchronize another account, only local Contacts or the account that he created the first time that you sign in with your new computer.
I tried to put a contact on the Group of local Contacts, and then Resync. This contact was Sync and placed on the computer (Outlook) and on a new account link my device BB.
So I thought that I could just walk-around her by placing all my contacts in my group of local Contacts. I could not find a way to 'select all' and don't feel like using the function "selection much" click on my 900 contacts.
Is there an easy way to solve this problem? Course, the ideal solution would be to synchronize the account I choose. I'm not sure that this is a reasonable request, however. So, I would be happy with the market "copy of local Contacts.
Thank you very much!!
Roney
Unfortunately, there is no way that you can select all contacts with just a tap. You should choose the option "Select more" and to highlight the contacts one by one.
Also he by design this Blackberry link will only synchronize the device data associated with the link BB for this computer account.
That means, 1 BB PC link data on the device will not sync with 2 PCs.
-
Passport new version of the blackBerry software
New version of software - Hola soy Argentina y tengo BB con passport the personal company. Brilliant me the change llego para V10.3.2 2836 cual is baje version. That tiene nuevo esta version? MUCHAS gracias
translation online:
Hello, I'm from the Argentina and I've been with the company staff Passport BB. Recently, I received the update version v10.3.2 2836 who already down. Which once again this version? Thank you very much
Hello / Hola @marianocorrea
Here is the link where you can see the official note released software update where changes are analyzed. Hope it helps you to clarify.
Suerte good luck!
-
Version of the blackBerry software 10 compared to the Version of the OS
Greetings,
Link, the software version and the Version of the OS for my PlayBook are 2.1.0.1917. For the Z10, however, the version of the software is 10.2.1. 2977and the Version of the OS is 10.2.1. 3247. so, what's the difference between the version of the software and OS Version?
Thank you
Shane.
The version of the software is everything, including the operating system, files of radio apps etc. It is actually a set of programs and includes the operating system; If the versions do not match because they are slightly different things.
When we say what version using you - we usually want to know the version of the OS, because that's what you get when you type in "myver" on the keyboard for BlackBerry.
Hope that it clears up a bit.
-
Link to Blackberry blackBerry software problem
Tried to download the BB link on the official website, but it is not present for a few days, I'm a MAC user.
Updated link to update v1.1.1.35 (Mac OS)
Download from this link
Download details Software name: BlackBerry link v1.1.1.35 (Mac OS) Name of the file: BlackBerry Link.dmg Download size: 85 MB Date of publication: 16/09/2013 .
-
Make a backup of the downloaded software
I have a downloaded version of 11 items, but before I pay for it I want to know how to make a backup copy of the software. Can what files I burn to DVD?
You check the installers - all of them.
Mylenium
-
Just installed Blend.
Win7, familly edition SP1, fully updated
BBZ10, fully updated
Connected w/USB or WiFi
The mixture is a great piece of software.
Is it possible to automatically add my signature to outgoing messages e-garlic? Again, responses and transfers?
Thank you
Lucky Luke ;-)
Proud owner of a BBZ10
Hello
If your question is about sending email through mixture? Or other means? Difficult to understand, I have to answer that in two ways.
On the device interface, you can have a GIS of email which is auto-appliqué to every email you send. But that function isn't (again, we all hope!) apply to the use of mixture as the interface for the e-mail account on the device.
Good luck!
-
Version of 10 blackBerry software problems
Dear Sirs,
Given that I installed the new version of the software 10.2.1.537, my mobile device - Q10 - is went really slow application linked to the smallest at the reception of e-mails and even synchronize email to the linked server.
Is there a bug in the new version?
Your help is very appreciated.
Best regards
Sami Khoury
John Merci for the info,
I'll get back to you with the results within a few days.
-
Configuration of the SDK software problem
When installing Flex Builder 3 beta, I installed the SDK in a location not standard (it is the same for the already installed 2.0.1 SDK of Flex Builder 2). Flex Builder 3 is none of them. When I try to manually add (Window-> Preferences-> Flex-> installed Flex SDKS), I get an error message "the page contains invalid values". In Flex Builder 2, the location of the SDK has been configured in < file eclipse > / configuration/com.adobe.flexbuilder/flexbuilder2.xml, Flex Builder 3 does not have this configuration file, so I guess that it relies on a standard location for the SDK.
-Are there of the workaround to get there (to add software development kits custom)?
-What is the location of the standard installation of the SDK?
Thank you
PeterHi Peter,.
A few questions:
-have you installed the Standalone or Plugin of FB 3 version?
-have you tried to uninstall and then re - install, either to a location standard or standard?It is important not to move the location of the SDKs folder tree by default once it is installed, FB is configured by the installer to find that tree and use it as its default global values. You can add your own additional copies of the SDK, in addition to the global default paths, but as if this works only if the default global paths are intact (juicy bug there).
You can try another miracle solution is changing the file plugins/com.adobe.flexbuilder.flex_*/config.xml, to fix the overall paths which were disconnected on your system.
I would like to know how this happens,
C. Agruss
Flex Builder Team
Maybe you are looking for
-
Hello I recently replaced both hard drives of HDD2K12, which meant I had to re-enstall Windows 7. Since that time, I have no options more in using an external monitor or even the brightness of the screen. The computer does not recognize the monitor w
-
HP Pavilion 15 laptop: request password over and over again
Hello world...Since yesterday, I can't use my laptop...When I turn it on, it ask for my password as usual... but when I get back the password and hit enter, I ask the password over and over again...I'm sure my password is just btwHow can I solve this
-
How to find what Windows 7 build I use?
How to find what Windows 7 build I use
-
Do I have seizures with net framwork?
In my programs, I see: NET. 1.1 framework NET framework Service Pack 2 2.2 NET framework 3.0 Service Pack 2 NET framework 3.5 SP1 Are there conflicts here that I have to solve? Suddenly I can not scan from my printer and was informed by the company
-
Sensory Touch on dv7-1451nr automatically launch Microsoft Excel
Sensitive touchpad on HP dv7 = 1451nr will automatically launch microsoft excel. The volume control will still work but excel continues to run each time it is typed.