Configuration of the user in DRM

Similar Questions

• Type of database is grayed out in the Configuration Manager, the user can substitute?

  Anyone know why this is happening? Is there a setting in my local installation of 8.54 PeopleTools that controls this setting?

  

  You have no data in the CONNECTION ID field.  When you complete this, you can then select the DB connection.  Without a login ID, it is impossible to create a level 2 connection, application server is the possible connection only, a substitution of Type DB to no effect.

• OID 11.1.1.6 - belonging to the user group management

  Dear,

  Is there a way of OIDS to manage the users, via a specific user attribute group membership?

  You all know that in AD for example, it is an attribute of the user "memberof" that could be used for this purpose I tried looking in OID for a similar attribute and actually found this a "orclMemberOf", however I can't figure out exactly how to use it. I tried editing through DOHAD, but got an error "constraint violation". I also tried to use ldapsearch as mentioned in this post Oracle Fusion Middleware security: group membership Fast searches within the OID with the attribute of orclMemberOf, but the attribute is not returned in the search results.

  Any ideas... ? We just want to know if the only way to manage the belonging to a group is done using the attribute 'uniquemember' of the group, or if it can be configured on the user object.

  Thank you

  White

  That can only means that is not your attribute to multiple values of the group.

  The default value for the OID, groups have an objectclass of groupOfUniqueNames and their membership multi value attribute is uniqueuniquemember.

  So lets say, you want to know the groups the admin account is a member, your application would be as follows:

  (uniqueMember = cn = orcladmin, cn = Users, dc is sampledomain, dc = com)

  This would release all memberships that belongs to the user.

  -Kevin

• Activate the user IOM account automatically

  Hi all
  
  OOTB IOM neutralizes the user and all its resources, if you set an End Date for the user, but it is not turn it back on if you clear the End Datefield.
  Normally, it must clear the Date fin field, record and then click allow.
  
  Im trying to active the user automatically when the End Date field is cleaned, what will happen with reconciliation.
  
  To get this behavior, I made the following configuration on the User Xellerateprocess definition:
  
  Create a task called change end Date and configured this task to trigger by adding it to the Lookup.USR_PROCESS_TRIGGERS.
  
  The task checks if the End Date field is empty.
  If its empty, it means that the field has cleaned and then I traced on the Response Code tab to call the already existing task called user.
  
  It works almost as expected.
  It allows the user to IOM BUT:
  
  -Although the user State change to Active the checkbox called Disabled User verifiedrest.
  -All provisioned resources are disabled.
  
  When you do that manually, by disabling the End Date, registering and clicking the Activate button it does not allow the user, uncheck the checkbox the user disabled and active all the resources of the user.
  
  WHA I'm missing? When you click the Activate button on the screen of the user details is not calling the task to allow the user to the User Xellerate process definition?
  
  Thank you for any suspicion.
  Adriano.

  Your task even for end date, invoke the 'enableUser' api. This will allow the user, and then propagate the change in targets for task enable as well.

  -Kevin

• DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Im very new to Oracle DRM and Im trying to get the configuration of the application on the Windows Server that is running SQL Server 2008.  When I try to connect to the Web Client I get this error.

  DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Can you please help

  The problem is solved, reinstalled DRM and recreated the repository. the password has a symbol that causes the problem, @.

• message: configuration cannot be verified - is the user name and password? None of them are wrong. I'm trying to set up my work email. How to solve the thi

  I have been using Thunderbird for a long time. One day he told me that my password is incorrect. After several attempts, the correct password decided to remove the e-mail account and start to charge. Now, when I put the account it says "configuration could not be verified - is the user name and password? None of them are wrong. I tried to change the password, contact my email provider and everything works fine except when trying to use Thunderbird. The email that I had tried to set up is at work. Any help in fixing this will really appreciate it.

  The best suggestion is to get the correct settings from your provider. They move to the top of their servers. They know the settings that work.

• Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

  When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:

  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  Please give me your entries for this problem.

  Kind regards

  Shankar Kale
  

  Hi Shankar,

  The question you posted would be better suited in the TechNet Forums. See the link.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Hope this information helps.

• You can use the GPO who manage the computer settings to define configurations based on users?

  I know that computer configurations and group policy apply to the associated computers that ot OU configs and users in group apply to users.  We have no access to manipulate the users of my team of Fund, but we were always expected to create the image.  Rather than create an image with the settings of the user (sounds, theme, start menu appearance) we want via GPO as much as possible and let our image as naked and as possible default.  We manage both XP and 7 also, but above all of XP.  Most of them are customization options which we want everyone to have the same (with some exceptions).

  Is it possible to configure the user via GPO settings by using only the configuration of the computer?  Sneaky, roundabout, or dirty acceptable methods with the exception of the script in the connection process.

  Some of what we seek to manage:

  * appearance

  * sounds

  * Start menu (classic)

  * screensaver

  And at the point where I'm asking because I thought that google couldn't help me more, I find my answer.

  computer configuration / administrative templates / system / group policy

  closure policy

  We define to be merged and bam.  had no idea...

• Display fields in the User Configuration

  Good day to all.

  In the configuration of the interface, we have the user configuration option to define fields that appears when you configure individual users.  When you go to User Configuration and click on a letter/number in the "list users starting with the letter /:" section, is possible to configure the display in the right pane which now shows just

  User	Status	Group	Network access profile

  We do not NAP is a useless field for us.  I want to set it up for one of our pre-defined user configuration fields.

  Thank you

  Dwane

  Dwane,

  This view is not configurable. It may be a feature request.

  Thank you

  ~ JG

  Note the useful messages

• Change the IP address in the user profile of the Network Configuration?

  I added some users on the network configuration in order to change the ip address when they are in the other site, but in Windows 7 it is inviting to enter the user name and password, if a single user, enter the name password it will allow them to change the ip address how to change so that the user is able to change your ip without asking for a password and username?  How can I solve it... Thanks in advance.

  Nerdcat

  Address you internal IP is defined by the router or the ISP based on your configuration.  If you try to change the internal IP address using "static IP" you shouldn't have to enter a user name and password so that it is in configuration and fixed like that.

  You cannot change the external IP provided by your ISP it however.

• Computer configuration settings vs the Configuration settings of the user - we earn?

  Just a niggling question that I can't get an answer for.

  What happens when a Group Policy object has some computer configuration settings that are the same as some user configuration settings?  Of course applied at startup computer settings and user settings are applied when the user logs on.  I just assume that user configuration settings will override the computer configuration settings?

  Thank you

  Hi Matthew,

  Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have questions about group policy that when we connect to the computer not user configuration, settings replace the computer configuration settings. Please correct me if I misunderstood.

  Matthew, I recommend you click on the link and post your query it as this category of the forum alone treats the group says http://social.technet.microsoft.com/Forums/en/winserverGP/threads . If you need assistance with Windows, you can always come back to us and we will be happy to help you.

• Get speech recognition error message could not start because the configuration of the language is not supported, the language must match the language of the user interface

  I am running Windows 7 Ultimate 32 bit, when I run speech recognition it fails and the following message appears,

  Voice recognition couldn't start because the configuration of the language is not supported, the language must match the language of the user interface.

  I tried to change the language, then back to British English, but the problem is still there, I'd appreciate any help with this problem

  Is there a solution to this problem yet?

• Password for the user: ASADMIN is not configured error clicking on the deployed webservice

  Hello

  By clicking on the deployed webservice, getting the error below.

  Password for the user: ASADMIN is not configured.

  As mentioned in the doc https://support.oracle.com/rs?type=doc & id = 1311068.1 followed the steps.

  After recording there is a warning stating"

  "Role data updates will be not visible in the application until the following processes are started: Workflow background engine.

  Then I restarted the Workflow Agent listening Service. But when I integrated soa gateway connection again I get the same error as "password for the user: ASADMIN is not configured.

  Can someone help me with the problem?

  BR

  Magali

  When you run this script, make sure you pay attention to the case of your users.

  So, when running:

  Ant f $JAVA_TOP/oracle/apps/fnd/txk/util/txkSoaConfigUtility.xml addASADMINToFNDVault

  Make sure you use 'ASADMIN' and NOT 'asadmin' when it prompts you for the username ASADMIN.

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• Configuration of the Essbase access via the Web browser user

  Hello world
  
  I have installed and configured the shared services, Admin Server, Essbase, now I need allow two user (User1 and User2) to access
  
  Essbase server via web browser. I request measures that I can achieve my requirement.
  
  If I tried several ways, but always struggeled with good configuration only i always able to connect with a user
  
  (admin).
  
  
  
  Concerning
  Kumar N

  Access EAS is weird (a large part of the functionality of the EAS is weird).

  While there is no request for Regional service to be set to, the username in question must be created in the Shared Services to connect to EA.

  So:
  (1) create the user name in the Shared Services
  (2) if Essbase is outsourced, set the user name on the server and the app/db in question (not strictly necessary from a point of view EAS, but you're here, so why not?)
  (3) launch EAS console, connect to Services of Administration and you are out of the race

  If you do not outsource Essbase security (why? "You want to maintain a username twice?) you need not do the step #2.

  Kind regards

  Cameron Lackpour