Configuration optimal HDD and software settings

Similar Questions

• How to make a backup of configuration of ESXi and iSCSI settings before upgrade to 4.1?

  Hi all

  I would like to know if there is a way to backup or export my current ESXi settings before starting the ESXi 4.0 to 4.1 upgrade?

  Any type of assistance and intervention would be greatly appreciated.

  Thank you

  Kind regards

  AWT

  It is part of the vMA or you can get a Linux / Windows Installer here - http://www.vmware.com/support/developer/vcli/.

  You boot from USB now?  If so, you should be fine for a new stick of scene, and then restore the config to it.  Ideally you the current version of the scene, restore the backup and then switch to 4.1.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• optimal audio and sync settings?

  Hello

  I was wondering if MP3s or WAVs would be preferable to avoid synchronization problems. In addition, the only audio stream settings would be better?

  I was also wondering if you can manually read the audio track by moving the playhead to top. I tried several times with multiple parameters without result.

  Sorry if I look stupid, I'm still pretty new to Flash.

  MP3 is better - it is more compressed sound quality.

  for beginners, it is easier to reach the sound to your timeline and in the properties panel, set sync to listen to, no event.

• Several Airport Apple ID devices disappear shared devices and Software Configuration of the airport

  We have three Airport extreme and two Airport Express devices in two offices in the city.  Some time in the last two days, they all stopped appearing in the sidebar of Finder 'Shared' category (if they had attached disk storage) and they stopped from appearing in the Configuration software of the airport on any of the Mac on these networks. (They always seem to be correct, routing traffic, however).

  For a while, we left a desktop completely alone as a control group and did all our testing and troubleshooting in the other office.

  We-hard reset (to the factory configuration) all devices from the airport to an office. They began to appear again. Then we started to re - configure them again.  At the time wherever we had updated the devices they had disappeared again.

  So, another factory discount based configutations for each device to this facility. Then we added slowly in pieces of their configuration.  When airports have received Apple ID and associated passwords for associating with iCloud/BackToMyMac/WideAreaBonjour (depending on what you want to call it), the airport devices disappeared from the airport Setup.

  If we tried to configure another device from the airport to extend a network of 'invisible' airports, the new airports were "unable to find" one of these networks to expand.

  If we reset all devices without providing them with Apple ID and passwords, they worked mainly as you would expect. The main difference being now do not appear as having been recorded as BackToMyMac/WideAreaBonjour devices.

  One side for people dealing with this note: If your router are invisible, but they are configured to be configured from the EXTENSIVE worldwide network, you can use "File-> configure the other" and specify the address WAN of the missing aircraft and get this screen access as one would generally. From here, remove all the Apple ID associated with these devices, press "Refresh" to save the settings and they seem to reappear magically in the Configuration of the airport software.

  In that State, storage seems to be available, but only for devices in Domain Local (direct connection). Airports without AppleIDs will not appear in the field to iCloud/BackToMyMac/WideAreaBonjour, and it's as expected, given that these IDS is the means for the identification of their field.

  If someone else has noted these behaviors and if so, have an idea about specifically when they first appeared? Is there by any chance someone who knows of any change in registration or the MWAC of multiplication?

  Did you approach the problem exactly as I did in the past, and having encountered problems of the CCMM literally every version of OS X. They were all distinct problems with individual characteristics, and in some cases the solutions exist. Having said that the CCMM has been completely reliable recently - which means running the most recent El Capitan release on all my Macs. The initial versions (i.e. OS X 10.11 to 10.11.3 maybe) didn't work at all. I don't know which version fixed whatever the problem was, I am sure he has not worked for someone else.

  The same real place with Yosemite and previous versions as well. CCMM did not reliable until the exit "point three or four."

  Through these experiments, I believe it should be a pretty fast connection. If the connection between a Mac and all the others does not meet this requirement (whatever that is) all you will be able to determine, it's that the CCMM fails.

  Apple is characteristically silent about the technical aspects of the CCMM, probably because of security concerns. Nobody outside Apple knows how it works. If you're still having problems, I encourage you to contact them. After mentioning predictable you corrective raw materials (the two following links) you will be put in touch with someone who will look to what is false, providing diagnostic assistance and send your information to engineering. If it's something they should fix, you'll know not to the point of an OS X update is published.

  Set up and use Back to My Mac - Apple Support

  Get help using Back to My Mac - Apple Support

  With all the conversations I had with Apple on this topic (which were many, involving a large amount of tests) not once they disclose any causal factors individual, other than to reiterate the need to run the last OS X, versions and the latest versions of firmware for their routers. In your case, that means probably that your Mac update to El Capitan. It is after all the very first recommendation in their document of support above, until you do this you will still not get in step 1.

• How to configure Windows to allow the parameters and software downloads to appear in system and standard user administrator?

  I HAD TO REINSTALL WINDOWS VISTA (SERVICE PACK 2) DUE TO A TROJAN HORSE THAT ATTACKED MY SYSTEM. I USED THE SUPPLIED RECOVERY DISCS SET WITH MY COMPUTER BECAUSE THE SOFTWARE HAS BEEN PRE-LOADED AND I HAVE NOT RECEIVED SOFTWARE FACTORY. WHEN I WAS SETTING UP USER ACCOUNTS, I CREATED THE ACCOUNT TO ADMINISTRATOR (WITH PASSWORD) AND A STANDARD USER ACCOUNT. WHEN I CHANGE THE SETTINGS IN MY COMPUTER IN EACH ACCOUNT, IT DOES NOT APPEAR THERE EITHER ACCOUNT. I DO CHANGES IN PARAMETERS OF EACH ACCOUNT INDIVIDUALLY. CAN I SET UP SO THAT WHEN I CHANGE THE SETTINGS, IT WILL DO THAT IN THE TWO ACCOUNTS? THANK YOU FOR YOUR HELP.

  original title; HOW TO CONFIGURE WINDOWS TO ALLOW THE SETTINGS AND SOFTWARE DOWNLOADS APPEAR IN ADMIN SYSTEM AND STANDARD USER?

  Most PC manufacturers who don't give you the disks give you a partition on your hard drive that contains the images of the disks so that you can burn yourself.  You should check out.

  When you say "change settings in both accounts' exactly what are the parameters what do you mean?  It is normal that many Windows settings to be on a per user basis.  For example. the desktop background is a 'definition' which is completely independent for each user.  You cannot set up a wallpaper for a user and hope that it displays desktop of another user.

• This will remove all your custom settings and the settings of many extensions.

  Hello

  I was reading this article of knowledge and he says:
  "This will delete all your custom settings and many extensions settings."
  What are the custom settings?

  for example one of these and what else
  bookmarks?
  Add - ons?
  Top toolbar - Customize the toolbar
  Add on the toolbar
  Firefox/preferences
  Authorization Manager settings
  the new page open

  Corrupted preference file
  File preferences may be corrupt, Firefox prevents writing to it. If you delete this file, Firefox will automatically create another when it comes to.

  Here's how to delete the prefs.js file.

  This will remove all your custom settings and the settings of many extensions.
  Open your profile folder:

  In the menu bar, click the Help menu and select troubleshooting information. The troubleshooting information tab will open.

  In the section the Application databases, click view in the Finder. It will open a window with the folder of your profile.
  Note: If you are unable to open or use Firefox, follow the instructions for finding your profile without having to open Firefox.

  In the menu bar, click Firefox and select Quit Firefox

  Locate the prefs.js file (and, if applicable, the prefs.js.moztmp file).
  Delete these files and files prefs - n.js where n is a number (e.g. prefs - 2.js).
  If there is, remove the Invalidprefs.js.
  Restart Firefox. You should now have reset all preferences.

  Based on information from preferences not saved (mozillaZine KB)

  See also http://kb.mozillazine.org/Profile_folder_-_Firefox

  #1: there are too many pref for all kinds of adjustment which will offer a recipe of what you lose and how to keep certain parameters.
  It is possible to copy specific lines of a prefs.js to this file in another profile or restore some settings after deleting this file in the current profile folder.

  All the prefs that show as a user defined and appear in bold on the topic: config page are stored in the prefs.js file.
  
  This includes the changes you make and data Firefox itself and extensions store as data/parameters in a pref.
  It's

  #2,3: the localstore.rdf file stores the toolbar configuration and other data.

  #4: the current versions of Firefox shows the menu entry "Tabs" at the top menu ' display > toolbars "and" Firefox > Options ' and in the menus toolbar pop-up if the tabs are not in the default position on the top.
  
  If the notches located on the top and the menu entry is not available and you want to move the tabs under the navigation toolbar, then you have to toggle the pref browser.tabs.onTop false on the subject: config page.
  
  A restart of Firefox is necessary for updating the menu entry to display or remove.

  Note that this pref will no longer effect when the code Australis lands on the output channel (code Australis will probably land in Firefox 29).

  #5: see https://support.mozilla.org/kb/Clear+Recent+History

  Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-ups, installing the software, stored passwords in permissions.sqlite and other site specific data stored in content - prefs.sqlite (including zoom on the page).

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  #6,7: history of search bar is the story of the search bar (Google) on the Navigation toolbar.
  
  All recorded data to a form on a web page is included in the data in the form, but you can not separate and distinguish the two.
  
  Browsing history is the history of the web pages you have visited.

  • Form history control: https://addons.mozilla.org/firefox/addon/form-history-control/
  • Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/

  #8: session cookies are always kept in memory and never stored on the disc in cookies.sqlite
  
  You can only delete specific cookies manually in the Cookie Manager or leave cookies expire when you close Firefox to make them behave like session cookies.
  
  Cookies of other compensation will include all cookies and don't obey the exceptions that you have made.

  #9
  Data stored in storage DOM is not stored in cookies.sqlite, but it is generally stored in the webappsstore.sqlite file or possibly in the form of data in IndexedDB.

  • https://developer.Mozilla.org/en-us/docs/Web/Guide/API/DOM/Storage
  • https://developer.Mozilla.org/en-us/docs/IndexedDB
  • https://addons.Mozilla.org/en-us/Firefox/addon/Foundstone-HTML5-local-storage/

• NB550D - can't find Toshiba HDD recovery software

  Hello

  Several days ago, I bought a Toshiba NB550D netbook. He had Windows Starter pre-installed, but I wanted to try Linux. I installed Linux and, of course, left the recovery partition. Now, I would return for Windows.

  I would like to restore the software preinstalled on the hard drive, but I can't find the disk recovery software HARD Toshiba which could install on a newly installed Windows and restore the system from the hard drive. Where can I find it?

  I have a whole score necessary for recovery, nothing moves or deleted.

  Enormously grateful for the help
  Toshiba NB550D user

  Hello

  Toshiba HDD recovery software can be launched via the advanced version preinstalled Windows boot menu. In other words, this feature works with OS preinstalled only.

  Now you have installed another OS (Linux) and this means that you can start t HARD drive recovery option more. HARD drive recovery partition is not enough to do.

  Have you created a bootable USB key using the recovery media creator before installing Linux? If so, you can use this stick now to restore the original settings. If you don t have that stick you can order recovery media here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Yahoo email won't load and store settings in the OS x mail application

  I tried to mail yahoo mail OSX El Capitan. Using the Yahoo tab in the box menu for the establishment of new accounts I can get the drop-down list to enter my email address that is recognized by Yahoo saying welcome + the address just entered. I press next to enter my password it is accepted. seconds after the drop falls again ask for the e-mail address and the password again. This time, I get the loading wheel which runs forever. After going to the doctor of connection I find mail forgot all my e-mail address and yahoo settings. It doesn't let me manually as some of the input fields are eliminated. My web yahoo mail warns me that my iMac has connected twice to my yahoo account. I went back into the box selection of accounts once again, before other suppliers named and pressed (other) then I found a button with a blue representative logo email that I have lived the same as before proceeder. Guess what? It loaded perfectly! The only problem is that this article only gives me the apps. Mail and Notes.Nothing else is available. If the Yahoo logo button had loaded, I would also have other Contacts apps.like & calendars + two other institutions. How can I get the missing apps to work using the mail icon settings?

  Is this your first attempt using Yahoo! mail on Mac? I had some weird problems with my own Yahoo! account today, and I know that sometimes he just goes a bit wonky and correct itself on its own. Unfortunately, it's a big part of the reason I do not use my Yahoo! account more.

  Have you tried to manually configure the account as an IMAP account? Y at - it none of the settings of your Yahoo! account to restrict connections and others? You have two-step verification enabled for your account?

• Update hardware and software Qosmio G30-198 for hight performance

  Hello

  I have a Qosmio G30-198.

  I have to use Autodesk Civil 3D program in the laptop.
  This is a CAD program that requires a lot of ram and a transmission of data high-speed HARD drive.
  To do this, it is absolutely necessary to update hardware and software for civil use with good performance.

  I need to buy and install HDD SSD, install more RAM (which is the maximum allowed in this computer?) and I need to install Win 7 Professional 64 bit.

  Please,

  If anyone can tell me how I can further improve the performance of the laptop, please tell me.
  I don't know what steps I need to keep.

  Can you help me?

  Thank you very much.

  Hello

  The RAM can be expanded up to 4 GB
  As far as I know this laptop supports the Intel® 945 PM Express chipset and supports this chipset may 4 GB of RAM
  http://Ark.Intel.com/products/chipsets/22817

  The HDD or SSD drive update shouldn't be a big problem.
  Usually the built in SATA controller should be able to manage the common SATA SSDS

• Equium L20-198: error 0271 check date and time settings.

  My apologies if this appears twice, I tried to change and I somehow lost my thread.

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  > Is it possible that the CMOS battery charge the main battery and this is my problem?
  Well, the CMOS battery can be charged with AC adapter but the laptop must be turned on for about 18 to 20 hours.
  It s not I known if battery CMOS takes the power of the main battery
  Usually the CMOS battery should always charge in work and when the laptop is plugged in
  So, theoretically the main battery has no influence on the CMOS battery.

  I think it might be a mobo problem, I think this could be a reason for it

  By the way; in most cases the CMOS battery is not removable... so I wonder how did you repalce this CMOS battery...

• L20-198 error 0271 check date and time settings

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

• I format the machine. How to back up the configuration of Firefox and bookmarks for re-installing later?

  I need to reinstall my operating system to windows 7. Firefox works fine. All I need is a procedure to save the configuration of Firefox and bookmarks to facilitate the configuration process when I re - install Firefox later. Thank you

  Firefox stores all your information in a folder called "account profile". If you back up to the top (on a USB key, for example), you can copy it back later after you have reinstalled your computer (including Firefox, of course) and all your settings, passwords, bookmarks, etc. will be present again. Take a look at: back up and restore the information contained in the profiles of Firefox.

• Satellite A200-1 g (PSAECE) Win XP. Need drivers for SATA HDD and GeForce 7300

  Hi all.
  I would install XP instead of Vista on my note. As far as I know, XP has no builtin for SATA driver. I found no drivers for GeForce 7300 on the toshiba Web site. So I need drivers for SATA HDD and GeForce 7300. Where can I find them?
  Thank you.

  Hello

  Why must you SATA XP drivers? You are not able to install XP because the HARD drive is not visible?

  With regard to the nVidia drivers:
  It seems that the A200 notebooks were shipped with a different hardware configuration.
  Some laptops come with the Intel GPU and some with nVidia graphics card.
  The Intel GPU driver is available on the Toshiba page.

  Graphic driver nVidia can be downloaded from the site Web of Toshiba Canada or 3rd sites like www.omegadrivers.net or www.laptopvideo2go.com

  See you soon

• Z440 - M60 BIOS - time and Date settings

  We can configure the Date and time in the BIOS on a Z440 with worm M60?
  If Yes, where is the option?  Sorry if this is a stupid question.

  I guess I don't think it is preconfigured, but I don't know even how to check the current configuration.

  EskoBomb, BIOS Z840/Z640/Z440 has many changes from previous HP workstations.  The user interface of BIOS F10 is different.  I deleted my previous answer, since it applied to the previous HP workstations.  (Sorry, I misread your original message).

  BIOS Z840/Z640/Z440 has NO settings to change the time and Date.  This generation of workstations doesn't have this option.  The time and date can be set after bootinging, and then edit them in the operating system.

  These BIOS settings are no longer needed.

• File ran and transfer settings Wizard Installation all users in Administrator account info

  I did a Windows XP Pro 32-bit clean install on a laptop.  After I installed all the software and drivers on the machine, I ran the file and Assistant to bring users account on the machine to transfer the parameters.  The problem is that I stumbled accidentally while still connected as long as administrator, all the information of users installing to the default Administrator account.  Y at - it an easy way to remove the users from the administrator account info, or to delete the administrator account take it back to the installed version of basic?  Thanks in advance for your help.

  Original title: using files and Settings Transfer Wizard. Oops

  Hello

  I suspect that Naman R misinterpreted your post. My interpretation is that you have used the Wizard Windows XP file / transfer settings, no Windows Easy Transfer.

  Assuming you still have available transfer fluid, which is a kind of external drive (USB, probably), there is no reason why you should transfer the settings again, but in the correct user profile.

  With respect to the transfer in the account manager, all the parameters of implementation of changes should be reversible system restore (start - all programs-Accessories-System Tools System Restore). Data can only be deleted while signed in as an administrator. Do the system restore before doing the right files and transfer settings, otherwise it will also cancel these changes in settings that have been applied to the appropriate user profiles.

  Tricky