optimal audio and sync settings?

Similar Questions

• Configuration optimal HDD and software settings

  I do a reload of the system installation, one of my systems to be

  dedicated to editing video and effects. My equipment is:

  • MB: P6t Deluxe V2
  • Operating system: Win7 64 bit
  • CPU: I7 920 (Stock # no OC)
  • GPU: Nvidia 285
  • RAM 12 GB @1600
  • HARD DRIVE 1: 500 GB 7200 RPM
  • HARD DRIVE 1: 500 GB 7200 RPM
  • HARD DRIVE 1: 1 TB 7200 RPM
  • HARD DRIVE 1: 1 TB 7200 RPM
  • HARD drive 1: 1. 5 TB external USB for backups only

  Software I have user first Pro CS5, After Effects CS5, SoundBooth CS5 and Photoshop CS5. My question for the software is how to better set up. I've seen many configurations of caching / Scratch and various allowances of CPU Ram and honestly I'm a bit confused by the latter. Also make it Performance vs that memory seems to make no difference visit once. It is better to select on the other? I use dynamic linking a lot so I don't know if that makes a difference in what either.

  I know that all these information is found in various discussions in the forum, but I get conflicting info I read through them.

  One last question. Do a restart before exporting? I could spend hours doing effects and cuts, and I fear that the RAM is a little full, so I reboot before I did because it gives me a warm fuzzy, but is it really necessary?

  Thanks in advance... TJ

  Have a look here: Forums Adobe: generic guideline for the installation disc and look at the installer of three discs.

  How is it that would translate to your situation:

  a. get a disk of OS boot & small enough programs, such as the Samsung Spinpoint F4 320 GB. It is then the C: drive in the overview.

  b. use the two raid0 1,000 discs. It would be the D: drive in the preview.

  3. use the two 500 discs in raid0. It would be the drive E: in the preview.

  No need to reboot before the export. Prior to export is wise however to save the project.

• Audio and video out of sync after rendering

  Hey!

  I already asked a fairly identical question like this, but I have some news:

  First of all, my problem is that after the export of the audio and video is not synchronized as in the scenario. Well, many have told me that he deals with variable frame rates, because I have images is 25 frames per second and sequences with 29.97 fps. But normally first would have changed directly each element in my sequence (25 fps, 1920x1080p) settings. And later when I add the clip in MediaInfo, he also tells me that the frame rate is 25 fps constant, not Variable. So I think that this is not yet the problem more.

  But now, here's a little 'story': when I open the video after the return of his perfectly synchronized WITH the VLC Media Player (and not Windows Media Player).

  And my question is: how is this possible? Couldn't, I now just change the Standart to VLC Player and then upload it to Youtube with the normal sync? What is the difference between windows media and VLC media player in this case player? Maybe it's because I have a few Quicktime footage in my sequence, which can be read with VLC Media player and not with windows media player?

  If you have any ideas, let me know!

  Thank you

  You basically answered your own question. VLC has proved to be more versatile and superior then the WMP.

• audio and video out of sync in first pro cc 2015, player QT video on a mac mini

  So, I use Adobe Premiere pro cc 2015 to change a screen capture video recorded with quicktime player. I'm on a mac mini with OS X el capitan, and it was my first time using first (so I probably just doing something wrong because I do not know the program, but anyway, I imported the video into the first, (it's a .mov file format) and the video and audio are out of sync) so I thought ok, I can simply detach the audio, move it above, the re - attach it, right? so I found a part of the video that has been easy to match the audio and video, and I lined up. Everything was perfect until I went to other parts of the video and realized that they were always out of sync. Apparently, the video is at a different speed or format or something as the audio, and even if I have lined up on the one hand, the other parts are always out of step. I looked at how to fix, I messed with the project settings, then tried to change a .mov to a mp4 (because a mp4 file that I already have on the computer was functioning very well in first) and finally, as a last effort, I downloaded version 2014 so and NEITHER VERSION WORK they both the same number.

  If someone can please help me I WILL BE so HAPPY and thanks a lot in advance

  I am really sad because I'm upgrading to use iMovie (ugh) and I was so excited for the first time and now it is messed up, and I'm really disappointed.

  If it makes a difference, the microphone that I use is a blue snowball ice I bought a week ago (WEEK AGO) haha

  None of the parameters of creation, or QT player or something that might help is very much appreciated.

  Thank you, Owen

  Thank you very much!! I finally found out with the help of the family, but I thank very you much for help!

• Premiere Pro CC 2015 video / Audio won't play - Out-of-Sync Audio and video clock errors

  After the installation of Premiere Pro CC 2015 I am unable to actually play my video in the timeline.

  I must point out that the same video and audio files accurate work perfectly in my previous version of CC 2014.

  Usually when I hit the play button nothing will happen and then after a time it will stutter back and fourth between a small loop (no audio present) and give an error that says "clock Audio and video out-of-sync (instead of time) in"Adobe Player.

  I tried full uninstall and reinstall Premiere Pro CC software 2015 without success. I also tried to delete all the preferences of Premiere Pro to my settings user without success. I should also mention that after effects CC 2015 is oddly also often send me errors do not have enough executives, so I'm not sure if they are related. Once more, the CC 2014 version works perfectly.

  For reference the video file is a .avi with Xvid compression and sound is a .wav. These have always been used exactly the same with CC in 2014 without problem.

  Computer:

  8.1 - fully updated for Windows

  NVIDIA GTX 780 video card

  32 GB of ram

  3770K i7 processor

  All Nvidia drivers are also updated.

  I also ran a full virus and malware scan just in case for some strange reason, that was at fault, and I ran into zero issues. Media Encoder, Photoshop, and Illustrator CC 2015 that all seem to work great.

  I am quite technically savvy and this one left me speechless, that really stinks that I was looking forward to the potential improvements to speed updates. That's life.

  Matt Borchert wrote:

  Nothing seems to be enabled. The CAD is what is selected in CC 2015 as shown in the image above. It is the only available thing to choose, and I can't select None or disable.

  Thank you.  In 2015, CC, you can click on the settings... button in the Audio hardware preferences.  Then in the record of the OS dialog box tab, you can disable manually (for example, right-click and choose the appropriate option) the SPDIF input.  It is only a temporary workaround until get out us a patch with a fix, but let me know if it works for you.

• Impossible to pass Audio sync settings

  Hey everybody,

  I am trying to create an animation based on a record mp3 audio of 5 minutes. I need to get my audio to stream sync settings so that I can listen to audio clips anywhere in my animation. Currently if I press on play no matter where in the animation it plays the audio. I have to play from the beginning to hear.

  After doing some research online, I realized that I spend my sync definition audio stream so that I can read audio data anywhere in the timeline panel. However, the only option I have available. The others are grayed out, as evidenced by the screenshots below. Any help would be appreciated. Thank you!

  

  

  Material and statistical software:

  Adobe Flash Professional CC (CS6) - Version 13.1.0.226

  Windows 7 Home Premium - Version 6.1 - Build 7601: Service Pack 1

  Intel Core i7, 4 GB RAM, NVIDIA GeForce GT 525 M

  Hi jato9281,

  Your project is a project of HTML5 for some reason any HTML5 projects are supported audio 'event '.  If you use a project of Action Script 3, you should be able to listen to your audio Stream.

• The use of generate for demodulation and modulation PSK sync settings

  Hi I'm trying to generate Parameters.vi of sync allows you to synchronize the flows recovered after demodulation and my input to the block of modualtion streams but I do not know how to work with this block to synchronize the input with the output stream stream. Also would you please let me know what are the modes of synchronization of the input bits and demodulation bit stream. I really appreciate your help

  Thank you

  Hi en99,

  To use 'Synchronization generate MT Parameters.vi' you must wire in what follows on your block diagram:

  • The parameters of the system created in 'System generate MT Parameters.vi' needs must be connected directly to the vi synchronization.
  
  
  • Sync settings must be wired directly to 'MT Demodulate.vi'
  
  
  • The bits of synchronization can be connected to synchronization vi directly at "MT generate Bits.vi.

  What I did is took your 11. VI you downloaded in your post previous and amended to contain synchronization vi. I recorded as a 2010 version.

  I hope this information helps!

  Kind regards

• Audio and video of the iPhone, do not sync in Premiere Pro

  Good afternoon! I'm having a problem with the synchronization of audio and video when I change the first adobe, recorded two videos for my iphone 6s and edited first by using sound effects, png and JPEG images and includes texts by the Prime Minister himself, but half of the video with impatience I lose audio sync with video I thought I had done something wrong, has remade the editing and even once, there was this error how can I solve this problem? Recognizing!

  
  

  Title edited by Kevin Monahan
  

  Hello

  The 6s iPhone uses the camera application which does not reliably draw a constant cadence, he shoots at a variable rate. You can buy apps that take on a constant pace, however.

  To fix your issue, you need to transcode into something like the hand brake. Then import it back to Premiere Pro. Next time use a better application.

  See you soon,.
  Kevin

• Audio and video out of sync in first after importation

  Hello

  I've seen a lot of discussion threads on this site and others on the subject. I shot some videos on my iPhone 6s and wanted to compile it to Premiere CS6. When I watch the video on my phone, VLC or QuickTime Player, the audio and video line up perfectly. When I import it in preview the sync audio and video download very out of wack. I tried to convert the video in .mp4, .mpg, .mxf file formats, and nothing does the trick. I tried to use the hand brake to apply a constant rate, but not luck. Does anyone have a solution to this?

  Data sheet:

  CS6 6.0.5 Adobe Premiere version

  16 GB of RAM

  a lot of free space on the hard drive

  Thank you

  John

  If you go to the movies on a cell phone from Apple, you may need to use an Apple program for editing... have you looked at Quicktime Pro?

• Audio and video out of Sync

  I capture images from video game using ShadowPlay recording at 60 fps mp4 files. When I import into first and play in the sequence, the audio and video are out of sync. When I play in VLC or Windows Media Player, the timing is perfect.

  Why first plays the audio and video synchronized?

  The corrections that I found online that does not solve the problem are:

  -Make the video in the work area bar (it actually makes it worse for some reason any)

  -Edit video in .mov file extension

  -I know how to use Handbrake to make the files before import has also been suggested, but I don't want to have this extra step added to my workflow, it should not be necessary.

  Any help on this would be greatly appreciated.

  Tempest tim wrote:

  Also, is there no other way to get around the problem of variable frame rate?

  Not if you use the GPU hardware to capture your h.264 videos, there isn't.  First can not correctly handle variable frame rate images.  And the images only you're going to get your encoder is VFR.

  You have 3 basic choices:

  (1) stop using ShadowPlay and use something else which will tax your system more to capture video in a constant frame rate format.  There are other applications that capture images CFR, generally in AVI format, and the resulting files are massive.  You will have a drop in performance in the game when you use these applications.

  (2) transcode w/parking brake to the CFR

  (3) use a different NLE.  Sony Vegas, from what I hear, will support VFR without problems.  Most other NLEs will not, including Premiere Pro.

• Lightroom guard lock when I try and sync or copy settings

  When I try and sync or copy settings from one image to the other, Lightroom crashes.  I have the most recent updates updated.

  I found another forum that suggested reset preferences and fixed it right up.

• Adobe first Pro CC 2015 Audio and video out-of-sync after the upgrade of the 2014 cc

  Hello everyone

  Once the upgrade to first Pro CC 2015 I get all of my video projects that are locked with a yellow box (Adobe Player) that says "Audio and video out-of-sync clock to xx:xx:xx.xxx ', and all my footage has the same problem

  No reason? HE WORKED IN CC 2014 PEARLS!

  any help is very appreciated.

  OK, since I'm short on time and my boss's eye laser pierces my skull, I had to ROLL BACK TO CC 2014.2 G * T!

  Fortunately, there is a way MORE HERE: how access, restore or update any Version of Adobe CC apps | ProDesignTools

  don't forget to install the updates after: all updates of Adobe CC 2014: Direct Download links for Windows | ProDesignTools

  Lesson of the day: If you have a big project on creation, and you are tempted to update CC 2015 for THE MOTHER OF GOD NOT WHERE, AND GET THAT HAND OF THE MOUSE NOW! It will mess up your project and throw the errors that you never had in CC 2014.2

  Good luck!

• Auto Sync and suddenly gray sync settings, is not accessible?

  Hello people

  This morning, I tried to add keywords to a library by adding them to an image and using auto-sync to add to all images, but automatic synchronization and synchronization settings are completely grayed out.

  Does anyone have any suggestions on what I can for that.

  I use LR3 on an iMac.

  Kind regards

  Jim

  Only one photo selected, perhaps?  Try to select the photos first.

• Binder/sync Audio and video

  I think I'm right on the right edge if this can work:

  I have a rough cut of a few clips using audio on the device. I also recorded with a separate audio recorder. I want to sort a secondary audio link to the primary audio and video clips from the source, so that the secondary audio will be added for the first mounting without having me to go and re - synchronize each change with the corresponding secondary audio. Is it possible to sync the audio added in a source file and have a reflection in an edited sequence?

  Aligning each camera with audio clip associated with its own sequence, then changing using these sequences rather than the original clips is one of the best ways to proceed in the light of your starting point.

  Audio drift should not be apparent on reasonable periods of clip (for example, up to 10 or 20 minutes) depending on the stability of the clock in the audio device.  Many reports were due some manufacturers using audio rates slightly non-standard who first then supposed to be correct and therefore generated out-of-sync issues for about 30 minutes or more.  Not your problem here.

  If, when you check the sync audio on a full clip, you know it's OK at first but in the end, then setting a marker for both video and audio at the end and using the rate stretch on the audio to change its length by a small amount to align the markers should give good enough sync for the clip.

• Unable to sync the audio and MIDI

  I only managed to get a sound out X Logic Pro 5.1 surround in a 5.1 Logitech Z-906 - via a card external sound Sound Blaster X - Fi. It's great being about to pan my synths around the surround sound stage and bass is really great. There is a small problem that I can't quite get my head around. The Roland SH-01 synth running at 44.1 Khz (fixed). The Sound Blaster X - Fi works at 48Kz (fixed). No device can be changed these parameters.

  I can play the synth through the speakers without problem, but if I save it on an audio track, LPX complains about the disparity between the mIDI synthesizer and audio - it detects the 48 kHz and I get an error "error trying to synchronize Audio and Midi - sampling frequency of 48 000 recognized." Check the conflict between Logic Pro X and external device. LPX allow me to change the sampling frequency of 44.1 and 48 kHz, it is not available as an option.

  So yes, I'm aware of the conflict but I can't do something. Is there a work around?

  How do you save the Roland, through its audio output L/R in the SB X - Fi?

  The problem as you know, it's the USB output Roland of locks the system to 44.1 while the SB is locked at 48. Round it is to get an external MIDI interface and use DIN 5 pin to old for MIDI input/reading and audio recording via the outputs analog L/R in the SB.

  Another way would be to use Configuration Audio / MIDI (in utilities) and to create a global device.

  How to combine multiple audio interfaces by creating a Global device - Apple Support

  This will allow (in theory) OSX for re - sampled one of the devices to match digital clock speeds, it's a 50/50 crap shoot if it will work or not.