Configuration problems - DRS. invocation not complete

Similar Questions

• Problem printing - "operation not completed; "print spooler service does not.

  My laptop has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. Print Spooler service is not running", even though when I look in the Services, it is running. I am running XP Build 2600.xpsp_sp2_gdr.050301 - 1519: Service Pack 2.

  Hello

  According to the description in this document from the Microsoft Knowledge base:
  http://support.Microsoft.com/?kbid=314876

  Please try this:
  1. click on start and then click Control Panel.
  2. double-click Administrative Tools and then click Services.
  3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click the Start button under the Service status field.

  Maybe it helps you solve this problem.

• How to "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected startup disk... "on a netbook without a CD/disk drive?

  I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk.  check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.

  Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank you

  Hello

  Follow method 1 and 4 in the article below and check if that helps resolve the issue.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477/en-us

  I hope this helps.

• C4385 will not complete the configuration of Windows.

  C4385 will not complete the configuration of Windows. Windows 7 operating system. Netbook for wireless configuration. Installation runs smoothly until the last step, the configuration of Windows. Looking for HPPhostosmartEssential.msi. I can't on my computer. I tried full uninstall and reinstall the software with the same results.  Due to the configuration of Windows does not complete, the drivers are not installed and I can't use the printer.  Any ideas how to locate HPPhostosmartEssential.msi or how to complete the configuration of the window?

  Hello

  Before the relocation, try using windows install cleanup utlity to locate and remove HP Photosmart Essential. Please click here how it works. Since the documentation mentions on PSprinters, you must find and remove the HP Photosmart Essential.

  Click here to download and run this utility. Once you are able to do these steps, perform the reinstallation.

• OC4J configuration problem when I start dbconsole!

  Dear all,
  
  I installed Oracle 11 GR 1 material on Linux OS. Installation is complete, the database manager, auditor and the company worked very well.
  
  for some configurations I had to change the hostname of localhost.localdomain to my requested name.
  
  Now, when I try to start dbconsole using emctl start dbconsole, I get the following error:
  
  OC4J Configuration problem. / OC4J_DBConsole_computer_name not found.
  
  Kindly help with this problem.
  
  Kind regards
  Imran

  You're probably on a dhcp-based system. You must ensure that the correct setting of the intellectual property is in the file/etc/hosts. The problem is that your db to any host name console has been made, its not available anymore. See the following page for the EM database troubleshooting,

  http://www.Oracle-base.com/articles/Misc/BasicEnterpriseManagerTroubleshooting.php

  HTH
  Aman...

• For acrobat was interruption of 11 system configuration was not completed.  Now can't delete or re-install again.  Can you help me in this problem?

  During the installation of Acrobat 11, interruption occurred and the system configuration was not completed.

  Now the program does not start.  Removal of the program is not allowed on top of the reason.  Re-Setup is not allowed for the reason that the system has already produced installed.

  I'm right with her.  Can someone give me an idea how to remove or re - install?

  Street

  Hi rues80079274,

  Reboot your system, uninstall Acrobat XI using this link Download Adobe Reader and Acrobat tool - Adobe Labs, stop, repeat & reinstall Acrobat XI using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Let me know how it goes.

  Kind regards

  Nicos

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• my iphone 5s problem could not complete touch setup ID come back please and try again... I need to fix the problem

  my iphone 5s problem could not complete touch setup ID come back please and try again... I need solve the problem... Thank you

  Same question! Please help. I have installed 9.3.1 on iphone 5 s. error message"could not complete touch setup ID come back please and try again. »

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• iTunes update errors with the following message appears: there is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected.

  iTunes error update

  I am trying to install an update to iTunes on my laptop and find the folowing part-way through the installation error:

  "There is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected. Contact your provider to support personal or package. »

  I got iTunes for 3-4 years now and have always been able to install updates successfully, so don't not sure what is the problem.

  I tried msconfig and changed the boot process, so it includes all of the non-Windows elements, as suggested on the Microsoft Web site, but that has not worked.

  Can anyone help?

  Thank you

  The instructions were to contact the vendor of the package. This isn't iTunes, Microsoft.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• Windows Installer error there is a problem with this windows package install. a program run as part of the set up did not complete as expected "during the installation of Itunes

  Original title: problem WIndows Installer to install the latest version of i tunes

  When I try to install the latest I tunes version 10, I get a message "there is a problem with this windows package installer. a program run as part of the set up did not complete as expected "the downloads version, but will not be installed."  How can I fix?  I have an earlier version, but I need to update to use my i pad.

  Hello

  You can try the steps of troubleshooting provided in the link below and check if the problem persists.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  To get help on the issue, you can get in touch with support for ITunes.

  http://www.Apple.com/support/iTunes/

• I can not install Seagate Crystal reports 6.0 Massage I got is system error configuration configuration is not complete (after 36% of installation)

  I can not install Seagate Crystal reports 6.0 Massage I got is system error configuration configuration is not complete (after 36% of installation)

  Hi elbashkateb,
   
  I suggest you to remove Seagate Crystal Reports from your computer by using the windows cleanup utility. Then download this software again and try to install in clean boot mode.
   
  Download link for the windows Cleanup utility: http://support.microsoft.com/default.aspx/kb/290301  
   
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Steps to clean boot mode:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.

  Now, try to install the program and check.
  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Hope this information is useful.
   
  Umesh P - Microsoft Support

• OC4J Configuration problem. $OH / OC4J_DBConsole_IPADDR_db not found.

  Hi all

  I have a new installation of Oracle 11 g 2 m4.

  I tried several times creating dbconsole, ensuring that the environment variables are defined property and also in the response file, specifically ORACLE_HOSTNAME is set correctly.

  The emca - config... returns with success,

  but in the newspaper, it shows me the URL to control db being in the form of https:// < hostname >: 5500/em

  Under OracleHome, I have a directory in the form of < hostname > dbcontrol Private

  Although my departure db control fails with above message.

  emctl start dbconsole

  "OC4J Configuration problem. $OH / OC4J_DBConsole_IPADDR_db not found. »

  My question is since emca creates the control with the format https:// < hostname >: 5500/em , and it is properly configured in OracleHome, why "emctl" refers to IPADDR and allows me not to start dbcontrol?

  Thank you

  DP

  What is the name OS & version?

  what OS command under report

  hostanme

  can you do successfully as below

  Ping

  Ping

• Could not complete your request because of a TIFF file analysis problem.

  I use Photoshop 2015.1.2 Relese on a Mac El Capitan 10.11.3 version

  I have serval Tiffs which I thought were corrupt, since I can't open them in Photoshop without the error "Could not complete your request because of a TIFF file analysis problem."

  But I can open them in the preview. Any suggestions?

  We have the same problem: compressed, but it lacks the StripByteCounts area (required for TIFF).

  Some TIFF decoders can read the file, but most will not.

  Overview of Apple gets most of this file, but the top of the image looks like it may be damaged.