configuration server weblogic internal Jdev 11 g

Similar Questions

• Docs for QA configuration with weblogic server 11g

  Hi Experts,
  
  Can anyone share a link or a any doc that would give step by step configuration to configure Oracle AQ with weblogic server 11g (10.3.4).
  
  Thank you.

  [Url http://download.oracle.com/docs/cd/E17904_01/web.1111/e14529/messaging.htm#sthref23] JMS Information Roadmap serves as the central repository for WebLogic Messaging documentation.

  Depending on the use case, you can use multilateral development banks, resource references or the e-mail gateway for son of JMS in the applications server - including QA - JMS-side. These options are usually used in combination with the 'foreign' configured server - same mappings when you are working with WebLogic JMS. You can see "Integrating remote and foreign suppliers JMS" on the roadmap to help choose between these approaches.

  For details of the integration of the QA - JMS supported, consult 'Interaction with Oracle Advanced queue' on the same road map.

  In addition, you can find examples AQ - JMS integration on our homepage 'grid of e-mail:
  * Step 1: Goto [url http://www.oracle.com/technetwork/middleware/weblogic/overview/index.html] Oracle WebLogic product Page.
  * Step 2: Click the grid corporate email link in the technical information section
  * (Direct linking is not possible currently, link changes often.) Fixed link keeps breaking.)

  Hope this helps,

  Tom

  Published by: falls on April 27, 2011 14:06

• Windows ip configuration is an internal error: the request is not supported

  I cleaned up a few viruses out of a Windows XP Professional computer to a customer, and now he can't go on the internet.  When I check ipconfig, I get the following error.

  Windows IP configuration
  An internal error has occurred: the request is not supported.
  Contact Microsoft technical support for more help.
  additional information: host name of request impossible.
  So I googled some results. Have replaced the TCPIP.sys file with one from another computer, I still get the same message.  I don't have a windows XP original disk to put it into recovery mode.
  I also ran the command "netsh int ip resetlog.txt" but which did not help either.  I saw on another blog.
  The NIC is to see that there is a power cable plugged into it as well.  Help, please!
  Thank you
  Trever

  Hello Trever,

  Follow the methods and check:

  Method 1: You can refer the following Microsoft Knowledge Base article and check.

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Let us know if that helps.

• Sync error, incorrectly configured server after the installation of Update 7.0.1

  Since the update of Firefox (I have a Mac OS 10.6.9 on SnowLepard) by installing the Firefox 7.0.1 update, now on every page I get the Sync error message at the bottom line. Incorrectly configured server.

  Synchronization error message constantly displayed after updating to Firefox 7.0.1

  There is currently a problem with the Firefox Sync server, and the developers are working to fix it. See http://status.mozilla.com/ for updates.

• How can I configure Server 2008 R2 to disconnect users, who have been disconnected more than exodus 12 hours?

  How can I configure Server 2008 R2 to disconnect users, who have been disconnected more than exodus 12 hours?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms

• If I configure the weblogic using staticport.ini, do I need to use it when I start nodemanager and weblogic.

  If I configure the weblogic using staticport.ini, do I need to use it when I start nodemanager and weblogic. If so, what would the command.

  Hello

  As far as I know, you only use this file during installation only. Then the values of ports configured in the file will be used by the Setup program to configure port appropriate for each component values. These port values would be stored in the files of each component configuration, so ultimately, you won't need to staticport.ini after a successful installation.

  Kind regards

  White

• Error during the deployment of ADF application on weblogic Server integrated in JDEV - [SPI: J2EE deployment 260010]

  Hello Experts,

  I received the following message when I tried to deploy a sample application on the weblogic Server integrated into my JDEV ADF.  Can someone help me with this error message?

  < 27 March 2015 21:30:09 CEST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

  IntegratedWebLogicServer start time: 33630 ms.

  IntegratedWebLogicServer has begun.

  [Running the application on Server Instance IntegratedWebLogicServer SavedSearches...]

  [15:30:11]-deployment began.  ----

  [15:30:11] the target platform's (Weblogic 10.3).

  [15:30:18] # incomplete deployment.  ####

  [15:30:18] [SPI: J2EE deployment 260010] unable to connect to ' t3s: / / localhost:7102' as a user, "weblogic. Error returned: null

  [15:30:18] [SPI: J2EE deployment 260010] unable to connect to ' t3s: / / localhost:7102' as a user, "weblogic. Error returned: null

  [15:30:18] [SPI: J2EE deployment 260010] unable to connect to ' t3s: / / localhost:7102' as a user, "weblogic. Error returned: null

  [15:30:18] t3s: / / localhost:7102: Destination unreachable; nested exception is:

  java.net.ConnectException: Connection refused: connect. No router available at destination

  [15:30:18] Destination unreachable; nested exception is:

  java.net.ConnectException: Connection refused: connect. No router available at destination

  # Cannot run application SavedSearches due to the deployment on IntegratedWebLogicServer error.

  [SavedSearches application stopped and cancelled Server Instance IntegratedWebLogicServer]

  Thank you

  David Selvaraj

  Can user, you please tell us your exact Jdev version?

  The error message tells you that the server has been started, but is not available under the localhost:7102 of access

  The port doesn't look good for me. The built-in Server normally uses port 7101. You can check which port you configured for the server?

  You can check this on the "application server" tab and select the built-in server, right-click, and select Properties. In the dialog box, you see the configuration.

  Timo

• Necessary assistance to the configuration for weblogic server 11g

  Dear all,

  My Version of the OS is:

  [oracle@wbctaxapp1 wlserver_10.3] $ cat/etc/redhat-release

  Release of Red Hat Enterprise Linux Server 6.2 (Santiago)

  Linux wbctaxapp1 2.6.32 - 220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux

  WebLogic Server is 11g

  ---------------------------------

  Installation directory is:

  [oracle@wbctaxapp1 wlserver_10.3] $ pwd

  /Home/app/Oracle/middleware/wlserver_10.3

  [oracle@wbctaxapp1 wlserver_10.3] $

  Please help me to configure the following settings... Thanks in advance...

  Archived real path setting	Enable
  WebLogic plug-in	Enable
  Properties of Node Manager	Must be true for the start
  Environmental variables	MW_HOME, WL_HOME must be set to the profile
  Entries for the crontab Manager node	Starting the Manager node in the crontab.
  Data sources	Data sources will be created after the migration of the DB

  Thanks and greetings

  Yvon Das

  Solved

• Create Integrated Weblogic Server failed on JDEV 12.1.3

  I got this error message when trying to put in place integrated into JDEVELOPER 12.1.3 weblogic server. Help, please.

  Studio Edition Version 12.1.3.0.0

  Build JDEVADF_MAIN_GENERIC_140302.1931.S

  Thank you.

  Add the environment variable to WLST script USER_MEM_ARGS = - Xms32m

  -Xmx1024m - XX: MaxPermSize = 384 m

  Log file:

  opt/Miyu/jdev1213_user_home/system12.1.3.0.41.140302.1931/o.J2EE. ADRs/BuildDefaultDomain.log

  Label: JDEVADF_MAIN_GENERIC_140302.1931.S

  Home product: /opt/miyu/Oracle/Middleware/Oracle_Home12.1.3/jdeveloper/jdev/

  Domain:

  /opt/Miyu/jdev1213_user_home/system12.1.3.0.41.140302.1931/DefaultDomain

  BuildDefaultDomain1.py 2014-03-17 06:44:01

  bash - c

  "/ opt/miyu/Oracle/Middleware/Oracle_Home12.1.3/oracle_common/common/bin/wlst.sh".

  "/ opt/miyu/jdev1213_user_home/system12.1.3.0.41.140302.1931/o.j2ee.adrs/BuildDefaultDomain1.py".

  Process began

  WLST >

  WLST > initialization WebLogic Scripting Tool (WLST)...

  WLST >

  WLST > welcome to WebLogic Server Administration Scripting Shell

  WLST >

  WLST > type help() for help on the available commands

  WLST >

  WLST > creation of a default domain

  WLST > reading model [progression]:

  /opt/Miyu/Oracle/middleware/Oracle_Home12.1.3/WlServer/common/templates/WLS/WLS.jar

  WLST > name of the parameter to "DefaultServer".

  "wlst > ListenAddress setting to ' 10.242.51.77 '.

  WLST > ListenPort parameter to 7101

  WLST > activation of SSL using the port 7102

  WLST > domain administrator of the setting for "weblogic.

  WLST > password field setting.

  WLST > field of writing [progression]:

  /opt/Miyu/jdev1213_user_home/system12.1.3.0.41.140302.1931/DefaultDomain/

  WLST > error: writeDomain() failed. Do dumpStack() for more details.

  WLST > problem invoking WLST - Traceback (innermost last):

  WLST > file

  "/ opt/miyu/jdev1213_user_home/system12.1.3.0.41.140302.1931/o.j2ee.adrs/BuildDefaultDomain1.py"

  line 79, in?

  WLST > file "/ tmp/WLSTOfflineIni2940421063436484189.py", line 73, in

  writeDomain

  WLST > 60317: an area or a cluster already exists with the name of the server.

  WLST > 60317: change the name of the field, contradictory server or cluster.

  WLST > to

  com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:56)

  WLST > to

  com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:2279)

  WLST > to

  com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1392)

  WLST > at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  WLST > to

  sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  WLST > to

  sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  WLST > to java.lang.reflect.Method.invoke(Method.java:606)

  WLST >

  WLST > com.oracle.cie.domain.script.jython.WLSTException:

  com.oracle.cie.domain.script.jython.WLSTException:

  com.oracle.cie.domain.script.ScriptException: 60317: the name of the

  domain, server or cluster names must be unique.

  WLST > 60317: an area or a cluster already exists with the name of the server.

  WLST > 60317: change the name of the field, contradictory server or cluster.

  WLST >

  Time elapsed: ms 25200

  I'm sorry. Ok.

  I found the problem. I have an other appserver running on port 7101. And integrated weblogic server was trying to use the same port. I changed the port number. It's OK NOW.

• Unable to connect to the Console of administration of Server WebLogic 10.3 (with Jdev11g)

  Hello
  
  I'm trying to use Jdev 11 g and Web Logic 10.3 to do something EJB. Unfortunately Web Logic 10.3 Admin Console breaks down
  After entering the user name and password. He did the same for the two ports 7001 and 7101. The error message is given below.
  
  I checked and saw that my system has C:\oracle\Middleware\wlserver_10.3\server\lib\consoleapp\consolehelp\WEB-INF\classes\jsp_servlet\_framework\_skeletons\_console
  but there is not that everything related to _wlsconsole...
  
  On the otherhand, 11g menus have an article to start the WebLogic console...
  
  Can someone give me some good advice to solve this problem?
  
  I appreciate any interest.
  
  Kind regards.
  
  Ali Riza SARAL
  
  < 24.Ara.2008 18:47:40 EET > < error > < netuix > < BEA-423142 > < the control com.bea.ne
  tuix.servlets.controls.portlet.Portlet could not be made properly due to the
  following error message:
  java.lang.IllegalArgumentException: [windowpc] type is not a valid for type
  the context tag. Valid types are: [[abstractbuttonpc, bodypc, Céline, at the border
  layoutpc, buttonpc, desktoppc, flowlayoutpc, footerpc, headpc, gr²dlayoutpc, hea
  derpc, layoutpc, menupc, pagepc, placeholderpc, shellpc, themepc, t²tlebarpc, to
  gglebuttonpc, w²ndowpc]].
  at com.bea.netuix.servlets.jsp.taglib.skeleton.Context.setType (Context.j
  AVA: 234)
  to jsp_servlet._framework._skeletons._wlsconsole.__window._jspService (_
  Window.Java:106)
  at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run
  (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet (StubSecuri
  tyHelper.java:125)
  Truncated. check the log file full stacktrace

  Set the locale to en_US and restart weblogic.

• Server error internal 500 WRT54G2

  Hello everyone, I have a problem with my router WRT54G2. I was upgrading my firmware when my computer froze, so I had to leave. Afterwards, I couldn't connect to the configuration based on the web page more. I did a factory reset and installed again with Network Magic and configure my wireless key. It works now, however, I can't in the web-based configuration page. Whenever I go to 192.168.1.1 and enter my info, it says only: 500 Internal Server Error. I've always been able to access this page, now I can't, then I guess it doesn't work because of the firmware upgrade interruption. I do a lot of mac filtering and I limit the amount of IP addresses my router gives so if someone hacks my security key, they still won't be able to connect, so to access my router configuration page is important to me. I have reset (press and hold the reset button for 30 seconds - 1 minute) the router several times and still nothing. I mean, the router still works. My brother and I can always connect with our mobile phones, I can't get to the web-based configuration page.

  -What can I do to solve this problem or did I mess up irretrievably? Thank you.

  A few suggestions...

  Is first of all try to find the IP address of your router and see if she is still set to 192.168.1.1 through the command prompt. Then try to ping for the address.

  If you are able to ping, another 30 seconds and then reset flash the firmware on the router using TFTP. Download it here. Instructions here.

  If you are unable to ping it or the TFTP does not work, do a 30-30-30 reset. Instructions here.

  If these don't work, I'm ideas. Finally, you really don't need to put in place the MAC filtering because it's somehow more usable with spoof of MAC address. You would probably find that suggested on forums countless times, but just put a good passphrase WPA2 and're you good to go. If someone is good, enough to hack your WPA2 key (which is currently almost impossible), while he would have no problem getting your MAC filter.

• NEW T320 Poweredge Server-&gt; Incorrect internal domain name used--&gt; currently locked system administrator

  Received Dell Powered T320 Server with windows server 2012 r2 preinstalled. I created an administrator account. Then, when asked to internal domain name, I used JAMPRODUCTIONS.local and set up from there with an another administrative account. This server was an upgrade of a previous Windows Server 2003 and I just wanted to put up with the domain that is used on this computer (also a .local but not JAMPRODUCTIONS). I tried to change the incorrect field to the correct. From now I am locked out of all connections (it seems). When I try to connect to JAMPRODUCTIONS ADMIN it says incorrect password when I know I type the correct password.

  Nothing had been put on the server of any importance. Only it would be important to ensure that dell had previously installed. I have the disc R2 de Windows server 2012. Is there a way to start over and do it just with the domain internal correct .local.

  Your help is greatly appreciated

  Thank you!

  Blueox15

  Will have on Dell's lifecycle? and can I use the same disc essentials r2 Windows Server 2012 and the key?

  Not at all. The lifecycle controller is not found in the OS, or even readers. It is built into the system itself.

  Blueox15

  The ease with which this issue can be fixed?

  All you need to do is start to the lifecycle controller (F10) and select deploy OS and reinstall the OS. There is no reason the same not to touch the raid configuration or anything. Just need to reinstall the operating system. If it does not see the drives, then we will need load the Raid driver. In this case let me know, as well as let me know the installed raid controller and I can get you the necessary driver.

• Server WebLogic ESS wont start after domain extension

  Hi all

  WebLogic Version: 12.1.3

  I recently expanded the weblogic domain to include the Oracle Business Planner.

  The UCR and the extension of area successfully...

  But when I started the server I get the following exception on SOA on ESS managed servers.

  [2016 01-20 T 13: 50:46.578 + 00:00] [WLS_SOA1] [ERROR] [] [oracle.mds] [tid: [ASSETS].] [ExecuteThread: '4' for queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 4835456a-61d3-401d-b9e9-79c081ffd2e6-00000004,0] [APP: ESSAPP] []

  oracle.mds.lcm.exception.MDSLCMException: MDS-00036: failed to instantiate the class: oracle.as.scheduler.metadata.EssMOChangeListener

  at oracle.mds.internal.lcm.deploy.DeployManager.deploy(DeployManager.java:795)

  at oracle.mds.internal.lcm.deploy.DeployManager.startDeployment(DeployManager.java:247)

  at oracle.mds.internal.lcm.MDSLifecycleListenerImpl.start(MDSLifecycleListenerImpl.java:175)

  at oracle.mds.lcm.weblogic.WLLifecycleListener.preStart(WLLifecycleListener.java:75)

  to weblogic.application.internal.flow.BaseLifecycleFlow$ PreStartAction.run (BaseLifecycleFlow.j

  Current structure

  UNIX machine

  -Adminserver

  -SOA_cluster

  -soa_serverr1

  -ESS Cluster

  -ess_server1

  Cluster - WSM

  -wsm_server1

  
  

  
  

  
  

  What could be wrong?

  
  

  Thank you

  SAPP
  

  
  

  
  

  haven't found a solution!

  We abandoned ESS and used Quartz Scheduler!

• The Apache 2.2 Server CONNECTION_REFUSED (the channel to the server weblogic 10.3.6)

  • I have created a web service using Jdeveloper 11.1.1.7 application and deployed on weblogic 10.3.6 on physical server we call let back-end server.

  
  

  • I don't want customer to give direct access to back-end server so I make use of Apache 2.2 , to be in the middle of client and back-end server. Apache 2.2 is configured on different physical servers call the middle Server.

  
  

  • I set the application root context (which has deployed in back-end server) on middle Server in the file httpd.conf of Apache.

  
  

  • I shared WSDL to the client of the file location ( WSDL URL which referring to the domain name Server middle ). The external client can access the URL thorug browser where they can see the WSDL content
  • But when the client attempts to send queries to Server Middle URL he get rejected with the following error:

  [error] [Public IP of the customer - clinet goes here-] ap_proxy: POST by train / [insert here the root of the application context] to the back-end host "[back-end local IP Server] / [insert here the port];" "except ' CONNECTION_REFUSED [operating system error = 0, line URL.cpp 1602]: call apr_socket_connect failed with error = 730061, local = [back-end IP Server] host, port = [insert here the port]"

  This error of Server Middle Apache error log file. No backend server log

  What happened so far:

  1. I check if I have access to the Server Middle user external to use the Telnet order. Telnet IP port . He works and the Server middle is listening.
  2. I also checked for all ports. external client and Server middle, between middle Server and back-end server , also using telnet. All ports work.
  3. In this answer: ssl - Apache 2 with Redirection of plug-ins for Weblogic, original location still requested to backend - lack of server

  It is suggestion to increase the value to accept orders of weblogic server setting. I did to the back-end server , but still the issue is not resolved.

  Problem solved

  I need to activate the option (WebLogic plugin active) WebLogic server where the application is deployed

  the structure of the field (left in the administration console Panel) - > environment - > servers-> (select the server where you deploy your application in this topic)--> general tab (from the server parameter)-> Advance - > (ICT option) WebLogic plugin activated

  Then restarted the server.

  Hereby you are telling the server you'll get indirect request through server proxy or balancer for example

  You can do this on several levels, such as cluster or a server based on your needs check out this site for more information

  http://www.Ateam-Oracle.com/WLS-plugin-enabled/

• Hyperic does not save configuration for WebLogic 8.1 Admin properties

  Hi all
  
  I'm using Hyperic HQ Server 4.2.0 running on CentOS 5.4 to monitor the Admin of WebLogic 8.1 under CentOS 4. I am able to connect server agent and monitor the performance of system (CPU, memory, applications etc.). AutoDiscovery is works beautifully, detect the areas of my WebLogic and the pathnames of the log files and startup scripts, leaving me the simple task of setting the username and password to access the admin server. But when I change these properties and click OK, all I get is the following error message after several minutes of waiting:
  
  The configuration has not been set for this resource due to: the Agent error: cannot connect to < IP of WebLogic Admin server >: 2144: reading has expired
  
  I have certified that the TCP 2144 port is open on the WebLogic administration server and so if it is accessible from the Hyperic HQ server. Other resources (CPU, memory, network, etc.) are monitored, so I do not understand why Hyperic said who is unable to connect to the agent.
  
  I appreciate any suggestions on what I can do to find out what the problem is. If I need to provide more information, such as the contents of log files, just ask for it.
  
  Thank you
  
  Davidson Paulo

  Hello

  Check this box... can help you
  http://communities.VMware.com/thread/355060?TSTART=0

  Hello