Sync error, incorrectly configured server after the installation of Update 7.0.1

Similar Questions

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• Failed to start Windows after the installation of updates

  HI, I currently use windows 7 32-bit and have been almost half a year now, nothing was wrong with it until just recently when I installed updates for windows and it goes across restart process. Whenever it restarts after the installation of updates it now in windows could not start and is system launch of repairs etc, when it finishes I cliquerai on end to end and then he launched startup correctly, also, I realize account updates, I have install are successful, when I connect (from the option view update history) , but I get suggestions of exact same update again just after the installation of the updates mentioned only, hope, it is specific help enough, would be much appreciated

  Can you provide the names, the updates that have been installed?

  see this article for when you are offered the same update again and again:
  http://support.Microsoft.com/kb/910339

• All the data disappeared after the installation of updates! Help!

  Hoping someone can help with this
  Last night I installed updates KB961371, 973346 KB and KB 890830 for Vista Home Premium and they seemed to have been settled... my computer turns off fine. But when I started today and connected to my usual user, I got a pop-up message from the tool bar by saying "your user profile was not loaded correctly, you have been logged on with a temporary profile, cnanges do you will be lost when you log out." Check the log of the events for more information or contact your administrator." I then found that all my data was away from all my files (music, photos, Documents, analyses)... everything was gone. I then logged out of my user every day and in my admin to have a snoop around and all the data disappeared from there too. While in admin I also looked in the update section to see if the updates have not been installed correctly, but he said that they had been installed successfully.

  I then rebooted, as I thought that it might help, but everything remained the same.

  After the reboot, I clicked through 'my computer' and hard the news here on the disc wrote I have 89 GB of 147 GB free, which I think is consistent with the amount of data I have stored. This made me think that the data is always there somewhere, but I can't access it at all thanks to my user every day or my administrator.

  As far as I can see, all the programs that I installed myself (such as Skype, open office software for my printer hp) are all present, but some of the shortcuts are out of the office. Also, when opening, they "behave" as newly installed programs. for example: Open Office writer guide me through a license agreement and registration rather than simply open a new document, and also firefox behaved in a way similar "new". Also, on commissioning today (after the installation of update yesterday), the window "welcome center" popped up, as did a window asking to save the "synaptics pointing device.

  In short, the system "behaves like new", remembers none of my settings etc, but it is still a my programs installed and most of all, I can't access any of my data! I have a Toshiba Equium P200-178 (use vista Home premium service pack 1 32-bit), I use AVG anti virus (8.5) and Ad-aware software anti spyware. These are updated every day and I run scans on a regular basis (last analysis aware ad probably about a week ago) so I'm not sure it's associated virus.

  Ask yourself what is this "temporary profile" and how to return to my old and my data! Help, please! Thanks :)

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  Good luck with it.

  Mick Murphy - Microsoft partner

• Error 404 - not found - after the installation of Essbase 11.1.2.2

  Hello
  
  I encountered error.
  
  I have a box of PMC 11.1.2.2 using Windows 2008. After the installation of Foundation and configure it, there is no problem at all. I can open workspace and interop as well.
  However, I added Essbase, installation and configuration of it. But after installing Essbase, I managed to turn it back on Hyperion Sharing Service, it did not work.
  
  The error that says:
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  
  What I did is also a reconfiguration of shared services, Essbase. But no luck at all.
  Does anyone have any idea, please advise. Thank you.

  Sometimes, this error may be because the data source details are incorrect that I showed you yesterday in WebLogic.
  I don't know how you managed to cause questions to the Foundation after the addition of essbase as I do not have the process that you did.

  If I go to WebLogic and change the user to the EPMSystemRegistry data source and then start the server EMP service the same errors are generated.

  <15-Jun-2012 08:32:58="" o'clock="" bst="">
  ".>

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• my laptop keeps restarting after the installation of updates

  my laptop is stuck at step 3 of 3 (only display 0% complete) after the reboot for updates, then restart again and again, with the same supposed progress, I ve let it doesn't restart on 7 times.still no good.

  Tell me what are the steps to solve this problem

  Hi Amrbialy,
  When your computer is turned on, push and hold down F8, this will bring an option before it starts on your desktop. Choose "last known good configuration".
  If this has no effect. Then do the same thing, except choose Safe Mode. When it boots to desktop click Start > all programs > Accessories > system tools > system restore.

  Then it will give you an option to choose a date to return. Choose a date before you install updates, and then click OK. Restart your computer.

  It will be useful.
  Let us know how it goes!

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problems with some sites to display after the installation of updates.

  Original title: Display problems

  I have some display problems with certain websites.  The appearance has changed after the last windows update.  For example, in Facebook to backgammon, displays boxes outside and I can't see the full picture in the other boxes or scroll down to see it.  Any ideas?

  Hello

  Thanks for choosing Microsoft Community to post your question!

  According to the description above, it seems that after installing the updates, you are facing some display problems with certain websites. I'll be happy to help you.

  I would be grateful if you could answer the following questions:

  1. What is the number of KB of the installed update recently?

  2. what browser do you use?

  3. What is the brand and model of your computer?

  While you reply us with the above information, we will update the video card driver and turn on compatibility mode (this applies only when you use Internet Explorer).

  See the following suggestions.
  
  Method 1: Refer to the following link suggestions.
  Some sites Web may not behave as expected in Internet Explorer

  http://support.Microsoft.com/kb/956197/ro

  Method 2: Open Internet Explorer in no mode control the Add - ons.
  a. click the Start button, then select all programs.

  b. click on Accessories, then select System Tools.

  c. click Internet Explorer (No Add-ons).

  If your browser seems to work correctly in Internet Explorer (No Add-ons) mode, you can use the add-on Manager to disable all add-ons and then turn on modules only as needed. This will allow you to figure out which add-on is causing the problem.

  Method 3: You can update the display driver.
  Check out the following link to update the display drivers.
  

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Error - system32/hal.dll is missing after the installation of updates.

  Original title: updates destroy xp installation.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: i'm trying to reinstall xp sp1 on an old toshiba laptop (m35-s456).  After installation and the installation of sp2 and a bunch of KB, reboot xp will not charge and comes up with an error saying the system32/hal.dll file is missing.  no idea why an update would impact on this file?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi derek45,

  The updates you have installed Service pack 1 and 2?

  This problem may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.

  You can follow this link and check if the problem persists.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S

• Error reading from disk after the installation of windows xp

  Ideas:

  • I got a new hard drive installed by professionals. I went to install Windows XP on my computer. He passed through the first stage, but after copying the files, it wouldn't restart. That repeatedly brings me to a screen that says: a disk read error occurred press Ctrl alt delete to restart and then it looks like it will restart but hten goees return the same screen. How can it be a disk error if it is passed by the installer and I've never touched the disc later? Now, I can't do anything with it. Any help would be greatly appreciated.

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software - image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  (Note: since you just replaced your hard drive is probably not the cause.) However, you should always test because it is not uncommon that new hard drives to the failure of the box.)

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• EAS console error adding essbase server after the power supply 500

  Hi guys,.

  I do a migration of cube 9.3.1 to 11.1.2.3 via the wizard of Migration of EAS.

  Yesterday, I tested the link and was able to copy it to an application. After having applied the Group of hotfixes,.500 I can't connect to the 9.3 old servers more. Nothing has changed. I can always get a smartview connection and by using the IP address of the server does not either, which excludes any network problem. When I try to add the old server again the console log says:

  Admin June 25, 2014 11:43:50 CEST com.essbase.eas.admin.defs.AdminCommands.AddServerToUserList Succeeded

  Essbase Server: lsrap11:1423 com.essbase.eas.essbase.defs.ServerCommands.Connect June 25, 2014 11:43:50 CEST

  Error: 0: your session is not connected to the server/agent Essbase.

  If anyone can replicate it? I would like to know if it is a bug and I have to cancel the Group of hotfixes to complete the migration the cubes.

  See you soon,.

  Alin

  I think it's a bug I've seen the same problem and then I rolled back EAS.500 and it worked again.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• System restored automatically after the installation of updates & a few missing desktop icons.

  Original title: same set of updates on both computers due to different problems, one problem being a system restore.

  I have two Windows 7 computers in my house.  They all have two problems after installing updates a month ago.  The problem for 'Computer 1' is a bigger problem than the problem of the "Computer 2".  2 computer problem not really seems to be a problem now, but I'll give you the information for comparison purposes. Sorry for the length of this post - I am trying to be thorough.

  1 COMPUTER DETAILS:

  News of the computer: Dell Studio 1745 laptop computer running Windows 7 Home Premium 64 bit, six months at the time of the problem, now age of seven months. It came with Norton pre-installed, never used and uninstalled.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Background: set up with a single account (Administrator, of course) and after a few days of putting in place computer, said ale user account for everyday use.  Computer is configured to warn me before downloading/installation of updates of Windows, with permission for each type of account to install Windows updates.

  While in the standard account, I welcomed these download/install updates and was prompted to restart the computer.  I was done with the computer, so I just closed instead of restart.  According to "Your update history Review", it's updates and they were all successful:

  Update for Windows 7 for x 64-based systems (KB980846)
  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)
  Update for Windows 7 for x 64-based systems (KB982519)
  Update Microsoft .NET Framework 3.5 SP1 for Windows 7 and Windows Server 2008 R2 for x 64 systems (KB982526)
  Cumulative update for Media Center for Windows 7 x 64-based Systems (KB981078)

  After you turn on computer back, everything seemed normal.  I opened Firefox and I got a notice that Firefox has an update is available, a standard user cannot.  Unlike some programs, there is no popup to sign as an administrator, so I went to start > switch user and signed as an administrator.  (There was no update of Firefox at this point - just a switch single user.) That's where the problem appeared: instead of normally load the admin Office, I had to wait while Windows configured my desk (it's new)... wait... wait... wait... wait... BAM!  Your computer has been successfully restored * insert date here * (I don't remember what it was - January of this year, perhaps - because I was so incredulous that it happened and I continued to watch the game "successfully restored").  I do not have the computer to eat, and it don't has not asked me if I wanted to restore it.  He just did, just on its own initiative, when I went on the admin account.  A bunch of shortcut icons are missing from the Office of the admin acct and the ACCT. standard, and wallpaper to the admin account has been changed.  I am not absolutely sure if nothing else was touched.

  I have searched online to try to understand why it happened, and I remember well from my only find, is that if I went to the restoration of the system, there will be an option to cancel it, but I don't see such an option. So I told the computer to eat on a few days to a week before that updates.  It doesn't seem to help.  Shortcut icons are still missing.  Looked at the update history and it shows the five latest updates as being installed successfully, but Windows Update tells me that I need to these five updates AND this time, the little check marks are only already there on four of the five updates listed.  (The first time, the little checkmarks were already there for all five.)  This is the update that is NOT now pre-checked:

  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)

  Do not reinstall the five updates.  I don't know if I should jump install them again, or if I should install only the
  now, four are already "pre-checked."  I'm very hesitant to install KB982670, because this update seems to be the likely cause of the problem given the fact that it is already pré-coché in the Windows and the following information updates for computer 2.

  Since I installed the latest updates for 1 computer with no apparent problems:

  X 64-July Windows malicious software removal tool (KB890830) 2010
  Update security for Windows 7 for x 64-based systems (KB2032276)

  NEWS ON COMPUTER 2:

  The computer news: Systemax desktop running Windows 7 Professional 64-bit, a month at the time of the problem, now age of two months.  It has not come with any pre-installed antivirus.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Reminder: Set up immediately with an admin account and a standard account for everyday use.  Computer has been set to automatically download and install updates for Windows, but is about to inform me first.

  At the time of the problem above with the laptop, desktop computer has been enabled.  As all loading,.
  an error message came that there was some kind of issue with the .NET framework.  At another person asked if he knew what was up with that, and it didn't.  Did not note the specific message, thinking he would tell me again if there was a real problem.  I thought it could have been some kind of Windows hiccups when starting the computer, not even knowing about update problems.  I have yet to see this message.  After the number of laptop (computer 1), I took a peek at the desktop computer (computer 2) to check that Windows Update and I saw that an update is available, which is the referenced above same update that the notebook had already the check mark in its box (KB982670), which gives me the choice to check the little to install it.  Very curious, since, as already mentioned, the computer has been configured to automatically download and install Windows updates.  Looked at the update history, and it has already downloaded and installed the other four updates that the laptop has been.  Changed the automatic Windows Update setting to warn me before you download and install updates.  I have not installed the missing update.  Said the only other person in the House who would probably bother install updates to not install it.

  A month later, 2 computer has a notification from Windows update that 21 or 22 updates are available (as a result, by clicking on the icon of the trial of Microsoft Office).  The update not installed a month ago is no longer on the list, and update history shows as having been installed a few days before, apparently because someone else in the House must have thought it looked like a good idea.  I installed all the 'important' updates and have not seen any more problems with computer 2.

  BACK TO THE COMPUTER 1:

  Yes, is there anyone with ideas on how to get 1 computer back to its state before the 5 updates listed above, and what to do about to reinstall some or all of them, I hope, without more problems, for example a random food system does not happen?  I have a feeling I will say that the random system restoration do not occur, but he did.

  Thanks for any help.

  No, I don't use the Norton removal tool.

  IN RE COMPUTER 1 ONLY:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 for good measure, reset Windows Update by...

  How to reset the Windows Update components?
  -Online skip the section to APPLY to; KB971058 access via I8 32-bit only; Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will delete your update history (but not list updates in the updates installed)

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Re: Vista will not start after the installation of update

  About 2 days ago I updated 2 Optional updates through windows update. It was - Input - Synaptics Synaptics PS/2 Port TouchPad
  and somethind to do with sound hdmi (don't know why I got this update ' cos I do not have a hdmi and I accidentally installed it as well).
  After that installs Vista won't start so I did a restore of the system in safe mode, and she came back to life, however, isn't in better shape, will probably not not to install Vista all over again.
  So be careful when you install these updates.

  It's weird that they came with windows update. As much I know usually windows update does not update if not needed harddrivers...

  You need to update your hardware drivers from the Drivers Toshiba download site and not from Windows update because no one knows if they interfere with the drivers of Toshiba.

• Internet does not work after the installation of updates

  From 2 updates (KB972270 and KB955759) internet wouldn't work once these updates have been installed.  I removed the updates and turned off the automatic update feature.  Periodically, I would try again but the same result.  I'm now 16 updates to download and I tried last night, but once again not Internet... even after manually loading all, but updates 2 above.  I want to keep my computer up to date but can't seem to solve the problem of the internet.  Is there a problem with the Microsoft updates?  How can I fix the problem, so I can update my computer?

  Open Internet Explorer (only) to http://windowsupdate.microsoft.com GOLD http://update.microsoft.com/microsoftupdate . Select CUSTOM and scan: are any of the updates other than KB972270 and offered KB955759?

  NB: If an update of root certificates is listed under the category of optional software updates on the left side of the scan results window, install it to enjoy greater security of IE8.

  If you choose not to install KB955759, you run difficulty he #50326 in http://support.microsoft.com/kb/954157 to protect your computer.

  Note: I'm not going to tell you it's OK do not install a critical security update. If IE crashes after installation of an update, something is wrong with your computer (e.g., an infection, one or several incompatible modules of the IE; a "horked" install IE8).

  If you install a security update & have a problem...
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• ENVY M6 - 1184ca: 8.1 for Windows does not start after the installation of update KB2919355

  Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,

  DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14 

  and then

  DISM / online/cleanup-image /startcomponentcleanup

  So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.

  I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.

  Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.

  When people ask me "What's up?", I always say 'the CAP '.

  So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.

  Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.