Configure Cisco IOS CA Server message

Similar Questions

• Cisco IOS DHCP Server + classless static routes on DHCP clients

  Hi, I tried to find if it is possible to add the ability for static routes to DHCP clients on the Cisco IOS DHCP configuration mode. I'm looking to add a parameters as defined in RFC 3442, like this one, located on the ISC DHCPd server:

  Global settings:

  121 = integer table 8 code option rfc3442-classless-static-routes;

  ms-classless-static-routes option code 249 = integer table 8;

  And for the subnet declaration:

  option rfc3442-classless-static-routes 24, 192, 168, 30, 192, 168, 10, 1;

  option 24 ms-classless-static-routes, 192, 168, 30, 92, 168, 10, 1;

  Is this possible?

  Thank you!

  Vitor

  Yes, the fun part it is to convert it into a format IOS will accept.  You can try:

  IP dhcp pool 0

  option 121 24.192.168.30 ip 192.168.10.1

  option 249 ip 24.192.168.30 92.168.10.1

  If this does not work, change the "intellectual property" for "hex" and each of your decimal byte converted to hexadecimal.

• Cisco IOS server certificate - is it supported on routers 857/877

  Please can someone confirm if the certificate of Cisco IOS server feature is supported on the Cisco 857 router. We have checked with the Software Advisor and no picture for the 857 when the server certificate of IOS feature is selected, but advancedIpservices image v 12.4 (11) T arrives to the 877.

  The two 857/877 supports IOS server Certificate

  to 857 you need the ADVANCED SECURITY feature set 12.3 (14) YT

  http://Tools.Cisco.com/ITDIT/CFN/dispatch?Act=feature&ImageID=619356&platformFamily=306&featureSet=8&featureSelected=2208&availSoftwares=iOS

  877 offers more IOSes with Certificate server supports when I chose the certificate server Cisco IOS feature with featured navigator I got a lot of IOSes supporting this feature

  Go to navigator feature

  http://Tools.Cisco.com/ITDIT/CFN/JSP/index.jsp

  Select search by function and select element Cisco IOS Certificate Server, you can filter the results by platform (857/877)

  M.

• Cisco IOS - failed login Admin

  Hello

  I configured Cisco IOS to authenticate via a server RADIUS (Cisco's ISE). By mistakely I put all authentication via RADIUS only.

  Now, I can not connect via RADIUS but unable to connect through credetials local Admin of Cisco IOS and for this reason I am not able to access the privileged commands.

  Is there a way back so this connection by admin (SMAP) would be possible and not on the SHELF?

  I do not have access to 'configure', 'enable the RADIUS user commands '.

  That worked before? BTW, what code IOS are you running?

  What error you see on the IOS command line interface when ISE is DOWN and you're trying to connect with the local user account?

  Do you have local authentication as a method of failover? You have paper before IOS config you locked?

  You can check that the ISE live authentication records if the user is authenticated by the radius server. Can you use the RADIUS credentials, go to LSE > operations > authentication > records messages.

  Did you write the changes? If this is not the case, the last resort would be to RELOAD.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?

  Cisco Aironet 2600 series Configuration of the DHCP server is NOT serving addresses?

  I have (2) AIR-SAP2602I-A-K9, configured the same way.

  on two different remote LANs.

  They don't seem to be handing out addresses via DHCP.

  {If I connect to a local network with another DHCP server}

  wireless devices can obtain addresses

  This another DHCP server on the LAN through the access point.}

  I followed 12.4.25d. JA.cg.pdf

  Configuration of the Access Point to provide the Service DHCP 5-22

  ---------|---------|---------|

  e.g. 3444-RCS1-AN #show running-config

  Building configuration...

  version 15.2

  3444-RCS1-YEAR host name

  no ip Routing

  USH - DM IP domain name

  DHCP excluded-address IP 192.168.29.89

  IP dhcp RCS1 pool

  network 192.168.29.88 255.255.255.248

  router by default - 192.168.28.1

  Rental 1 0

  interface BVI1

  IP 192.168.28.211 255.255.254.0

  no ip route cache

  default IP gateway - 192.168.28.1

  ---------|---------|---------|

  ---------|---------|---------|

  e.g. 3444-RCS2-AN #show running-config

  Building configuration...

  version 15.2

  3444-RCS2-YEAR host name

  no ip Routing

  USH - DM IP domain name

  DHCP excluded-address IP 192.168.129.81

  IP dhcp RCS2 pool

  network 192.168.129.80 255.255.255.248

  router by default - 192.168.128.1

  Rental 2 0

  interface BVI1

  IP 192.168.128.171 255.255.254.0

  no ip route cache

  default IP gateway - 192.168.128.1

  ---------|---------|---------|

  Thats the DHCP Pool range 192.168.29.88 through 192.168.28.95

  Well this will confuse your customers.

  And this is NOT how to set up your "range".   See below:

  DHCP excluded-address IP 192.168.29.1 192.168.29.87

  DHCP excluded-address IP 192.168.29.96 192.168.29.254

  IP dhcp RCS1 pool

  network 192.168.28.211 255.255.254.0

  router by default - 192.168.28.1

  Rental 1 0

• Cisco IOS router 837 - configure DDNS / dynamic DNS

  I have an Internet, connected to my Cisco router link. The package that I subscribed comes with a dynamic IP address. I said me, if I need remote access in the Cisco router, I need to enable the DDNS function. Is this possible on a Cisco router? I have been informed that this feature is not supported. Please help me

  Hi Bro

  Yes, Cisco ASA and Cisco IOS router supported DDNS. Just make sure you have the right version of IOS, which you could refer to this URL of Cisco http://www.cisco.com/en/US/docs/ios/12_3/12_3y/12_3ya8/gt_ddns.html#wp1202953.

  Please refer to the config below made with dyndns.org.

  !

  hostname INT-RTR1
  !
  IP domain name dyndns.org
  8.8.8.8 IP name-server
  !
  IP ddns update DynDNS method
  HTTP
  Add http://ramraj: [email protected] / * //nic/update?system=dyndns&hostname=&myip=>
  maximum interval of 30 0 0 0
  minimum interval 30 0 0 0
  !
  interface Dialer1
  IP ddns update hostname INT - RTR1.dyndns.org
  IP ddns update DynDNS
  !

  Note: hostname = INT - RTR1.dyndns.org was the host added/registered in the dyndns.org site.

  Note: Press Ctrl + V, then just type the symbol? When to add the CLI adds http://___ above.

  Note: ramraj:cisco123 is simply an example of an IDs in dyndns.org.

  You can also refer to this URL for more details http://www.petri.co.il/csc_configuring_dynamic_dns_in_cisco_ios.htm

  P/S: If you cela this comment is useful, please rate well :-)

• UCCX 10.6 - Error Message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again"

  Hi guys,.

  My client has a solution with UCCX 10.6 and the system presented today, in the morning (08:00 more or less) followed the error message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again." After a minute the system back to work without nothing action. I saw the newspapers MIVR and not identify the possible cause of the problem.

  Can I help me, please

  Thank you

  Wilson

  These newspapers are not in a readable format. Look for something like lost connection

  Concerning

  Deepak

• Authentication on Active Directory of Cisco IOS

  SCENARIO:

  2 cisco Secure ACS are configured to authenticate the connection of the user in Active Directory.

  RADIUS servers configured in IOS

  radius-server host 10.30.18.24

  radius-server host 10.30.18.25

  PROBLEM:

  When the primary server 10.30.18.24 Ganymede could not validate logon user, we have been disconnected from the router. Then I tried to change the order of the RADIUS servers in the router config that is

  radius-server host 10.30.18.25

  radius-server host 10.30.18.24

  and have gave us access. Can someone explain why 10.30.18.25 did not during the validation of the user in the first place?

  Concerning

  Simon

  Hi Simon,.

  Then the reason for this is, there are certain conditions that must be met before the unit tries to contact the second server in the config file.

  If you turn on,

  Debug aaa authentication

  you will get then 3 types of responses.

  -PASS

  -FAIL

  -ERROR

  Don't GO-> needs no explanation

  FAIL-> authentication server was available but the server has rejected the request of the user for some reason any.

  ERROR-> there is no response from the authentication server. No doubt its not accessible.

  ERROR is the only requirement when he will try to contact the following server defined in your configuration.

  So it's may be the likely reason why he never went pour.25.25 finished second et.24 was first, because que.24 was always accessible and returned FAIL for user authentication.

  Kind regards

  Prem

• Cisco IOS autogroups

  Hi all
  
  I recently added 90 - odd Cisco switches for installation of HQ of our Organization through the HQ command line tools.  Almost half of them, the individual switch ports have been detected and HQ automatically created autogroups for the ports on the switch.  For the rest of the switches, no switch ports have been detected automatically.  As far as I know, there is no significant difference in configuration between switches, but I'm still looking into it.  All switches are configured in central administration under the Cisco IOS platform.
  
  Has anyone experience this problem with switches?  Anyone know how the process of discovery of autogroup works for Cisco IOS/IOS Interface devices?
  
  John Miller

  Hi John,.

  I think that you run into a bug that has been discussed here:
  http://communities.VMware.com/message/1937579#1937579

• SNMP v3 & Cisco IOS

  I am trying to configure snmp v3 to monitor my cisco IOS devices
  I get the following error when I try to add configuration properties
  "The configuration has not been set for this resource due to: invalid configuration: error reported by Agent @ 10.101.11.56:2144: java.lang.UnsupportedOperationException: v3 snmp4j support not yet."
  The monitoring agent is the hyperic Server
  Server version: 3.0.2 under Windows 2003 SP1
  Agent version: 3.0.0
  What I am doing wrong?

  When HQ was opened last year to replace our client SNMP with SNMP4J library source.  Since that we've not seen the SNMP v3 support.

  http://JIRA.Hyperic.com/browse/HHQ-62

  It allows you to control your devices IOS using v1 or v2?

  -Ryan

• Help to configure cisco

  Hi all

  I need your help here I am trying to configure a router Cisco 881 when infact I have a connection which reached the Wan port on the router, I set up 88.le XXX (public IP) I put the default gateway etc... his short film works because when I ping the IP to the outside, than it works
  My problem, I want to have internet on my FastEthernet port 0, I configured a dhcp 192.168.0.X albums pool it works but I got no internet despite having the nat outside inside put the road, so I added a static route, but it is not the copy of my config work thank you.

  1 running-config #show
  Building configuration...

  Current configuration: 5424 bytes
  !
  ! Last configuration change at 15:56:09 UTC Thursday, March 13, 2014 by admin
  version 15.2
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname R1
  !
  boot-start-marker
  boot-end-marker
  !
  !
  logging buffered 51200 warnings
  !
  No aaa new-model
  iomem 10 memory size
  !
  Crypto pki trustpoint TP-self-signed-2132292671
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2132292671
  revocation checking no
  rsakeypair TP-self-signed-2132292671
  !
  !
  TP-self-signed-2132292671 crypto pki certificate chain
  certificate self-signed 01
  3082022B XXXXXXXXXXXXXXXXXXXXXXXXXXXX
  !
  !
  !
  DHCP excluded-address IP 10.10.10.1
  DHCP excluded-address IP 192.168.0.254
  !
  DHCP IP CCP-pool
  import all
  Network 10.10.10.0 255.255.255.248
  default router 10.10.10.1
  Rental 2 0
  !
  IP dhcp pool vlan5
  network 192.168.0.0 255.255.255.0
  default router 192.168.0.254
  Server DNS 8.8.8.8
  !
  !
  !
  no ip domain search
  "yourdomain.com" of the IP domain name
  IP cef
  No ipv6 cef
  !
  !
  license udi pid CISCO881-K9 sn FCZ18047124
  !
  !
  !
  !
  !
  !
  !
  property intellectual ssh version 2
  !
  !
  !
  !
  !
  !
  !
  !
  !
  interface FastEthernet0
  switchport access vlan 5
  no ip address
  !
  interface FastEthernet1
  no ip address
  !
  interface FastEthernet2
  no ip address
  !
  interface FastEthernet3
  no ip address
  !
  interface FastEthernet4
  IP 84.14.XXX. X 255.255.255.248
  NAT outside IP
  IP virtual-reassembly in
  automatic duplex
  automatic speed
  !
  interface Vlan1
  Description $ETH_LAN$
  IP 10.10.10.1 255.255.255.248
  IP tcp adjust-mss 1452
  !
  interface Vlan5
  IP 192.168.0.254 255.255.255.0
  !
  default IP gateway - 84.14.209.185
  IP forward-Protocol ND
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP nat inside source list 2 interface FastEthernet4 overload
  IP route 0.0.0.0 0.0.0.0 84.14.209.185
  !
  access-list 2 allow 192.168.0.0 0.0.0.255
  not run cdp
  !
  !
  exec banner ^ C
  % Warning of password expiration.
  -----------------------------------------------------------------------

  Professional configuration Cisco (Cisco CP) is installed on this device
  and it provides the default username "cisco" single use. If you have
  already used the username "cisco" to connect to the router and your IOS image
  supports the option "unique" user, that user name is already expired.
  You will not be able to connect to the router with the username when you leave
  This session.

  It is strongly recommended that you create a new user name with a privilege level
  15 using the following command.

  username secret privilege 15 0

  Replace and with the username and password you
  you want to use.

  -----------------------------------------------------------------------
  ^ C
  connection of the banner ^ C
  -----------------------------------------------------------------------
  Professional configuration Cisco (Cisco CP) is installed on this device.
  This feature requires the unique use of the user name "cisco" with the
  password "cisco". These default credentials have a privilege level of 15.

  YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
  IDENTIFICATION INFORMATION PUBLICLY KNOWN

  Here are the Cisco IOS commands.

  username secret privilege 15 0
  No username cisco

  Replace and with the username and password
  to use.

  IF YOU DO NOT CHANGE THE IDENTIFICATION INFORMATION PUBLICLY KNOWN, YOU WILL HAVE
  NOT BE ABLE TO CONNECT TO THE DEVICE AGAIN ONCE YOU HAVE DISCONNECTED.

  For more information about Cisco CP, you follow the instructions of the
  Of your router's QUICK START GUIDE or go to http://www.cisco.com/go/ciscocp
  -----------------------------------------------------------------------
  ^ C
  !
  Line con 0
  local connection
  no activation of the modem
  line to 0
  line vty 0 4
  access-class 23 in
  privilege level 15
  password
  opening of session
  entry ssh transport
  line vty 5 15
  access-class 23 in
  privilege level 15
  local connection
  transport input telnet ssh
  !
  !
  end

  Add below

  interface Vlan5

  IP nat inside

• How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using a single SMTP account?

  How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using only a single SMTP account?

  In other words, I need to download via POP3 messages sent to the * address email is removed from the privacy *, * address email is removed from the privacy *, * address email is removed from the privacy * but I want to send messages using Mar SMTP service associated to * address email is removed from the privacy *

  If I get a message like * address email is removed from the privacy * I want to answer as * address email is removed from the privacy *.

  Is this possible?

  How can I configure Outlook Express?

  Concerning

  Marius

  You can do this if the Server SMTP allows you to send from a location that you are not connected via their internet service.  So if you have this permission, go to tools | Accounts | Add mail.  Then under the account of property | You want to set the server for incoming mail to the POP3 account, and then the SMTP protocol for the other account that you use to send servers.  And then indicate whether or not the server requires authentication, and if yes, then you will need to put in the user name and password for the SMTP server it.  Under properties. Advanced to define appropriate ports that may be different from the default value according to e-mail accounts.  You can also check the "leave a copy of messages on the server" for accounts POP3, if you access messages from multiple computers.

  Once you have an account set up, then you can set others upward in the same way, but change the POP3 properties for each while leaving the SMTP ones the same.

  Once you have all that in place, you might want to backup things in case something goes wrong: www.oehelp.com/OETips.aspx#6

  Steve

• Cisco IOS Software Internet Key Exchange vulnerability Enquiry

  Products affected

  Cisco IOS devices are vulnerable when you run a software image of an affected version of the Cisco IOS software that does not support the IKE version 2 (IKEv2) and is configured to use IKE version 1 (IKEv1).

  Vulnerable products

  This vulnerability affects Cisco IOS 15.1GC, 15.1 T software version trains and 15.1XB. No other Cisco IOS software release trains are affected.

  Ref: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20130327-ike

  If we use "not affected (for example; version". 12.4, 15.0 releases)"and configured with IKE version1?  Can it be affected by this vulnerability?

  Subsys router #sh | include ikev2

  ikev2_cli_registry registry 1.000.001

  Thank you best regards &,.

  Ye

  You are not affected by this vulnerability.

  As described in the notice - "There is no affected 12.4 based rejection" and «There is no rejection of base affected 15.0»

• Defining a 1852nd Aironet AP - Radio Off - Cisco IOS 12.3 (4) JA

  I have a brand new Cisco Aironet 1800 AP series I'm trying to install. Specifically the 1852E. I do not have a controller and try to use the method of deployment of mobility Express. When I received the unit there is a yellow label more precisely declaring outside: "OFF BY DEFAULT note RADIOS: radios are disabled by default for Cisco IOS releases 12.3 (4) JA and later.

  If anyone can please tell me how I am supposed to this access point configuration when the radios are not suite, so the CiscoAirProvision SSID is not broadcast?

  I tried the following:

  1 connect the unit to my PoE switch. Unit Gets power and discovery mode starts (red/orange/green light cycling). He succeeded receives an IP address from my DHCP.

  2. when I try to access the device through my laptop via the local LAN it just times out. Pings meet.

  I apologize if my post seems harsh, I am quite agitated that even after having spent more than 5 hours trying to troubleshoot and get this thing to work, there was nothing else than a nightmare (both for the installation of touted 10 min). I do RTFM. I missed something simple jumps? or am I just to assume that Cisco has really missed the boat the patch appropriate for an assignment in their literature.

  FOR INFO. Thorough searches Google and research on this forum gave me no help.

  Thank you.

  Convert a CAWAP AP an AP express mobility

• Cisco IOS - XR with ACS

  Hello, my question is if you need to configure the router Cisco IOS XR-activated (it is a series of 12 k by-the-by) differently on the side of the ACS or is it added like any other normal router.

  Hi raul,.

  the ios - xr router will act as a NAS for the candidate countries. If the configuration will be the same as any other NAS on GBA.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resloved