configure error message for locking user even with correct password entry.

Similar Questions

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• Error message: "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

  Original title: problem with the Windows Installer Package

  I am trying to install an update for my video FlipShare program and I get the following error message "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your provider to support personal or package. Anyone has any ideas to fix this?

  Would be - what your anti-virus program blocks scripts? See:

  Error a Script required for this install to Complete could not be run when you run a Microsoft Fix it Solution! -Microsoft Fix it BLOG - Site Home - TechNet Blogs:
  http://blogs.technet.com/b/fixit4me/archive/2009/03/31/error-a-script-required-for-this-install-to-complete-could-not-be-run-when-running-a-Microsoft-fix-it-solution.aspx

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Turning on the laptop computer error message reads "the user profile Service service has no logon. __

  The error message reads "the user profile Service service has no logon.

  User profile cannot be loaded.

  Thanks have tried but can't boot from a fix it for me or set me.

  Go to Safe Mode with networking

  Here's how to get safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Mode safe mode with networking

  You can log into your own account in safe mode?
  If so, you remember the date when you did NOT have this problem?
  If so, this date no more than 10 to 15 days ago?
  If so, again, please do a restore of the system in safe mode.

  How to restore the system:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Once completed, restart your machine and see if you can log in to your account in NORMAL mode.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error message "the service user profile Service has no logon. Unable to load the user profile"How can we get in the laptpop to solve the problem? /

  We get the error message "the service user profile Service does not logon, user profile cannot be loaded."  Prevents us from entering the computer laptop-so how to solve this problem?  Help?

  Hi LisaPie,

  Step 1: You can run the fixit available in the article below

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  If you cannot start the computer in normal mode, try the steps in safe mode with networking

  Step 2: Start the computer in safe mode with network. To do this, follow the steps below:

  Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Advanced startup options menu select SafeMode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• ORA-04031: unable to allocate 32 bytes of shared memory ('shared pool'.  Check your error messages for the cause of the error. (= < POINTER >)

  Dear team,

  We have for instance R12.

  DB - 11.2.0.3

  12.1.2 - application

  in this concurrent instance depressed frequently when checking of log file showing the error as

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic FDPCRQ met an ORACLE error. ORA-04031: unable to

  allocate 32 bytes of shared memory ('shared pool'.

  Check your error messages for the cause of the error. (= < POINTER >)

  .............................................................................

  APP-FND-01388: cannot read the value for the profile FND_MGR_STRTUP_THRES_TIME option in the routine, and routine.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  
  

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  Post: WARNING: mail_queue_enter: create file maildrop / 379309.437: permission denied

  Please guide me to solve this problem.

  Concerning

  Kumar V

  Dear Kumar,

  I suggest you to check the FND_NODES table

  1) connect to SQLPLUS as the APPS user and execute the following statement:

  Select CONCURRENT_QUEUE_NAME in the FND_CONCURRENT_QUEUES where CONCURRENT_QUEUE_NAME like '% FNDSM ';

  (2) If you have found that FND_NODES table with entries incorrect node (old node from the Source Instance), and then run the query to clean below

  EXEC FND_CONC_CLONE. SETUP_CLEAN;
  COMMIT;

  (3) then run AutoConfig on all stages, firstly on the DB layer then APPS and webtiers levels to repopulate the necessary system tables,

  and make sure that you are now able to see the correct entries in the FND_NODES table and start the application services.

  Kind regards

  S27

• Why do I always error: message of 150:30 even after download of Java 6 &amp; restart my computer?

  I work with an iMac 27 "bought in 2011.

  Why do I always error: message of 150:30 even after download of Java 6 & restart my computer?

  Please click on the link for the same question below.

  150:30

  Let me know if it helps.

  ~ UL

• clear the error messages for form fields

  Hello
  
  I use jdeveloper 11.1.1.4.i having the form with the user name and password.
  
  I need to clear the error messages when the password meets the model.
  
  I followed this
  http://blogs.Oracle.com/jdevotnharvest/entry/using_javascript_to_clear_validation_error_messages
  
  but this leads to a few other issues.it is clear all page error messages,
  
  but I need to clear the error messages for a component not the adf page.

  The very purpose of ADFPage has a method

  clearMessages
  
  public Object clearMessages(String componentId)
  
      Clears a messages for a particular component id. If component Id is null then the Global messages are cleared.
  
      Parameters:
          componentId       -       a componentId or null for global messages
  

  Find out here http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e12046/oracle/adf/view/js/base/AdfPage.html#clearMessages_String _
  This should allow you to erase the message of an element.

  Timo

• WARNING -: AIP-50082: error message for duplicate Exchange Protocol

  Hello
  
  I am facing this warning while sending outgoing messages Rosettanet b2B Oracle.
  WARNING -: AIP-50082: error message for duplicate Exchange Protocol
  Even after this warning, the messages are get exchanged with the trading partner. B2B report shows State of the message as 'done '.
  
  
  The question is very similar to the next thread.
  
  [t 701140]
  
  I tried to manually enter the values in the table "b2b_event". First, it is said that "the line is created. However, it is not actually get created in the table.
  
  Can you please help me with this problem?
  
  Kind regards
  Ravi Shah
  
  

  Please make sure that msg_id(2) is single rate while the message. In addition, let us know what is the value of MSG_TYPE you rate.

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• Log: error message: "the service user profile service has no logon failed to load the user profile.

  Error message: "the service user profile service has no logon failed to load the user profile.

  Unable to connect.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947215#letmefixit

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• error message 'there is a problem with the printer turn the printer off even more'

  I have a new 7525 HP photosmart HP printer, if it can find all the flashing lights with an error message on the screen "is there a problem with the printer. Turn the printer off on new"this does not solve the problem... Can't clear this error message!  Cannot use this printer!

  Hi sandrafranks,

  Thank you for your answer!

  In my view, it is unwanted material. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope this helps and have a great day!

• We get a blue screen with no error message when the user arrives in the morning... but not every day.

  Have a user who was the bluescreen with no error message when she arrives in the morning. This doesn't always happen.  But when it does, it must do a hard boot of his computer. It runs XP SP3, and it is on a domain. Another user reports what is happening also, but not as often.

  Yet once, it is not consistent where it happens every working day. It's maybe 1 or 2 days a week, if that. Hibernation is disabled and power options are set to never turn off.
  If this is not enough information, I will be happy to provide more if necessary. Any contributions to this issue would be appreciated.
  Thank you

  This may apply . But this message does not resemble a BSOD / crash

• -error message 200284 when calling DAQmxReadAnalogF64() with a USB-6210

  I have tried the code a CVI application to communicate with a USB-6210. I want to start the acquisition to gain 30 samples and then collect them. My problem is when I call the DAQmxReadAnalogF64() function, I get this message error of-200284. The error message means that the data has not yet been acquired in a nut shell. He said I should do to ensure that my startup trigger is configured correctly. I tried to use the internal clock to start the acquisition. I tell myself that I have not configured something correctly.

  In the DAQmxCfgSampClkTiming() function, I set the sampleMode to DAQmx_Val_FiniteSamps I thought I would collect 30 samples (number_of_scans = 30) when I called DAQmxStartTask(). It does not work. When I put sampleMode to DAQmx_Val_ContSamps I can collect data. Here is a stripped down most of my code:

  returnAcq = DAQmxCreateTask ("myAcqTask", & acq_taskHandle);
  returnAcq = DAQmxCreateAIVoltageChan (acq_taskHandle, physicalChannel, "acq_channel", DAQmx_Val_Diff, minVal, maxVal, DAQmx_Val_Volts, "");

  returnAcq is DAQmxCfgSampClkTiming (acq_taskHandle, "OnboardClock", sweepsInterval, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, number_of_scans);.
  returnAcq = DAQmxStartTask (acq_taskHandle);
  returnAcq = DAQmxReadAnalogF64 (acq_taskHandle,-1, 5, DAQmx_Val_GroupByChannel, Data_readings, number_of_scans, & read, 0);
  Disable the task
  DAQmxClearTask (acq_taskHandle);

  I guess my question is: am I set up so that the internal clock will begin the acquisition when I call DAQmxStartTask()? I thought when I put the second parameter in DAQmxCfgSampClkTiming() to 'OnboardClock', this would use the internal clock.

  Thanks in advance for your help,

  Don Pearce

  Don,

  You're right, your task is configured to use a sample clock internal with a trigger for starting the software.  The description of the error pointed out several reasons why people might see this error.  What is the value of 'sweepsInterval '?  I think that as configured DAQmx should be pointing at the speed (in Hz) specified by sweepsInterval.  By the way-1 in the entrance to numSampsPerChan, I think DAQmx will try to read all samples for a finite acquisition (30 in your case).  If you run below 6 Hz, the lira could be the time-out period before these data were available.

  When it is configured as a continuous, what are the values is passed in the sampsPerChanRead parameter?

  Dan