Configure the array of primitive type for POF

Similar Questions

• How to generate the array Diagnostic Utility ADU for Esxi server

  How to run Diagnostic Utility ADU or HP Insight Diagnostics HP Insight Diagnostics table to collect the status tables and logs data FRO an Esxi Server

  How to generate the array Diagnostic Utility ADU for Esxi server

  Example:

  Download the package .vib here: http://vibsdepot.hp.com/hpq/feb2013/esxi-5x-vibs/hpacucli/hpacucli-9.40-12.0.vib

  and place it on a store of data seen by the host...

  Install it using the CLI:

  software esxcli vib install d vmfs/volumes //hpacucli-9.40-12.0.vib

  Now run it:

  ~ # cd/opt/hp/hpacucli/bin

  / opt/HP/hpacucli/bin # . / hpacucli

  HP Array Configuration Utility CLI 9.40.12.0

  Detection of controllers... Fact.

  Type 'help' for a list of supported commands.

  Type "exit" to close the console.

  => ctrl all diag file=/tmp/my_ADUreport.zip ris = on = on zip xml = on

  Generation of diagnostic report... done

  -Online output

  / opt/HP/hpacucli/bin #.

  my_ADUreport.zip in / tmp can now be downloaded from the host...

  It could be that useful...

  / Rubeck

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.

  Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.  I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor

  Hello

  HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.

  This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1

  If you can't make it work, you must decide between a new card or another router.

  Personally, if it's new and I could return it, I'd get a different router model. But YMMV

  ------------

  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to configure the virtual disk as SSD for the customer?

  Hi all:

  I have a virtual machine in an SSD, the guest operating system is Windows 8, but the guest OS, the virtual disk as 'hard drive '.

  Can I set the virtual disk as SSD for the guset? (Like VirtualBox)

  Thank you!

  Irake99 wrote: can I put the virtual disk as SSD for the guset? (Like VirtualBox)

  No, IDE or SCSI are your only choice.

• No option to configure the card credit or debit for Applepay on my SE

  Hello!

  I just changed my 5 in an SE and wanted to create pay Apple, but as soon as I open the application portfolio, there is no option for the addition of debit or credit card, only to scan passbords. And I have the same problem on my Air 2 as well. I have the latest version of iOS on both devices. I am currently in Hungary (if this is important).

  Please help me, because I have no idea what is wrong.

  I thank in advance

  Mate

  Hi Mate,

  Just follow the instructions in this article to support > configure Apple pay on your iPad, iPhone, or Apple Watch - Apple Support

• Autofocus TextField when the keys are of type (for Qwerty devices)

  I have a TextField will be used for filtering a list of items. For the Q10/5 etc I would like that it if the focus was automatically to the textfield if all keys are typed (and the keys to the first and following would go there).

  I have this work by adding a KeyListener on the container Page and when I get the keyPressed signal I do:

  onKeyPressed: {
     if (!field.focused) {
        field.requestFocus();
        field.text = event.unicode;
     }
  }
  

  It works, unless the user is able to type two keys quickly enough, in which case the first key goes in the field, but the second is lost.

  I checked that the routine above is actually executed twice, once for every strike, and that field.focused returns true for the second sequence of keys, so this seems like a bug. Anyone have ideas on this?

  If someone else has implemented something similar, could test you with two quick strikes in very quick succession (probably<50ms apart)="" and="" see="" if="" you="" get="" the="">

  My original post on this: http://supportforums.blackberry.com/t5/Native-Development/Auto-focus-TextField-when-user-presses-key...

  I don't know why I created a second, other than that I must have forgotten that I had done the first time where I started this one. I'll close this as an answer, but looking back at the other for the main thread.

• Initializing the elements of the array to different types of data

  Hello!

  Receiving data sring and write it in the table. Shot data consist of different types of data, so now I have to initialize my element of berries somehow to correct the data type. Table example:

  char

  char

  int

  int

  float

  float

  Is it possible somehow? Or should I use the formula node or something like?

  Thank you! (new)

  These data resembles a cluster to create a cluster, you can create a constant of cluster on the comic book and use the cast function to fill in the cluster. Some things you need to be aware of:

  What is the size of the Int?

  What is the size of the float?

  What is SSE-endian data.

  Here are two examples:

  

  Tone

• Someone at - it successfully configured the cartridge of integration Foglight for receptions of SNMP Trap and corresponding alert?

  I have a use case, by which we receive------ingest SNMP devices SAN Hitachi interruptions in our Foglight 5.6.5 instance.   We have the cartridge installed and loaded 5.6.3 integration and full access to the dashboard integration.  Can anyone shed light on what are the next steps?

  Daisy,

  I recommend that you look at the information of the community of http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/f/4788/t/19552981.aspx#6115

  Bart has contributed to the discussion of SNMP traps.

  David Mendoza

• Despite the solution given in the forum, I can not .jpg listed in the type of listing file for how to do in the face of various types of files.

  Whenever I click on a link, .jpg, the image opens in Firefox. I want to use another program, but I can't change because .jpg does not appear in the list of file types for which you can specify actions. I know that there is an answer in the forum of Firefox, but I never get the option box that asks me what to do with the file, so I can't go to the box 'do this for all these types of files. Help!

  JPEG images are considered normal browser content and do not generate an open/save/Cancel dialog box, unless the site sends a special header indicating that it should be treated as a download (disposition = attachment instead of inline).

  To Save the image, your best integrated option is to right-click on the image and use save picture as or if it's a link to an image, right click the link and save the link under.

  But to start the image in a different program, I can't think a built-in feature that can do this, then you probably need an add-on.

  I see for example, there are extensions to open an image in PhotoShop or Fireworks:

  • https://addons.Mozilla.org/firefox/addon/open-with-Photoshop/
  • https://addons.Mozilla.org/firefox/addon/open-in-Fireworks/

  If these programs are not relevant, if all goes well there is a more general purpose extension on the site that fits your needs.

• Better way to return primitive types in Java

  Currently we have built classes that wrap our primitive types: MyInt, MyLong, etc.. We realize that another option would be to pass a single element arrays of primitive types to retrieve the data.
  
  Is there a standard way, it must be managed? Should I use a wrapper class to retrieve our primitive types or passing an array of primitive type?
  
  We also - some cases where we actually do need an array of integers (ints) returned. We have the same issue - we continue to use a wrapper class that will contain the table of interest or simply transmitted in the int array, get the data back out in there (but then they also return the returned size).
  
  Thank you!

  Brian R says:
  In our case, we don't have a single value, there are returned. We call our method and expect to have 2 + values returned. So you are saying in this case that you build the wrapper class around the primitive objects?

  If youw Ant to return several results a common pattern is to pass a table that you can fill out and possibly a length to say how many values have been returned. for example

  public int read(byte[] bytes);
  

  Such a method can fill any number of bytes (up to its length) and returns the number of bytes filled. Often, read() returns-1 to indicate that no further data is available.

  You can do the same thing with an array of int or a long arrary. If you don't want to return the length, you can use the first or last item to keep the length. for example

  public void populate(byte[] bytes, int[] ints, long[] longs);
  

• Changing the properties of the individual elements in the array

  In the attached VI, I have a table 1 d of the slider ('Phase Coefficients') controls where each element of the array represents the coefficient in a polynomial of arbitrary order. The problem I have is that the range of slider, I put to the coefficient of the lowest order (element 0 of the array) becomes quickly impossible for one more order coefficients (> 5 elements). Small changes in the highest order coefficients dramtically change the global polynomial.  I want each element/slider to have its own line, but I know that's not strictly possible that each element of a table shares the same properties. I've implemented a work around (use boolean to activate) in which the range of all cursors is set according to which the item is viewed, but my implementation prevents the modification of the range during execution of the VI. Is it possible to adapt my method (or use another method all together) in order to allow different, editable for each slider element ranges?

  Thank you!

  Each element of an array must have the same properties.  They can only differ in value.

  You can have an array of clusters, and each group can have the slider control.  Here, you will be able to regroup a slider with different properties in the cluster build clusters in a table.

• I have to hold down the fn key to type

  I just bought this computer 5 days ago its an Acer laptop Aspire One and I pressed the fn key to type for example if I want to hit j then number 1 appears. Also if I want uppercase I have to hold down the FN key and shift at the same time key to get capital letters. I'll type my name without hold down the FN key, so you can see who pass my name is Jenny Schumacher type it now im going to normal without press and hold the FN key sch40acher 1enny now u could please e-mail me back a.s.a.p..  and do I want to no what is wrong with my computer or do I have 2 return it cuz there is no right way. I paid her only 248.00 for your old laptop for 5 days and already problems. Thank you

  If I want to I have to hold down the FN key and shift at the same time key to get capital letters uppercase letters.

  Looks like your laptop is a numeric keypad incorporated in the standard keyboard.  So, probably, you have NumLock to be able to use this feature.  Find a way to turn off Num Lock.

  It would be better to a question in a forum of Acer...
  Or simply look in your manual...  (page 19); }
  http://support.Acer.com/acerpanam/manuals/Acer/0000/servicemanuals/SG_Aspire%20One_BOOK_081009.PDF
  (BING search engine for)
  pad digital NumLock aspire notebook site: acer.com
  )
  HTH
  Robert Aldwinckle
  ---

• Best app for the batch processing of photos for the web?

  I would like to know what is the best application for batch processing photos for the web quickly and easily. I'm a web editor and often need to resize, compress, or crop several photos and would like a quick way to configure the basic parameters and processes for example 20 pictures at once. Basically, I'm looking for something with the ability to FastStone Photo Resizer (I'm on a Mac and cannot use FastStone). I remember an once suggested graphic designer LightRoom - would that be a good idea or Adobe has something else? Or maybe not Adobe at all?

  PhotoShop seems heavy for this purpose: it is ideal to make the photo woth that much at the time, but less large to do less with many pictures at once. I know that I can implement some sort of macro-thingie, but I would like to be able to quickly change settings such as the percentage of compression or the width in pixels.

  I don't need a lot of editing tools, mostly just work in pixels, resizing, compression or cropping and save for the web in .jpg and .png - and Mac.

  I hope someone here can guide me in the right direction.

  Hi eval

  I think the best thing for you is Adobe photoshop elements, cover in simple not expensive and all what you want

  Photo Editor software & tools | Adobe Photoshop Elements 14

  concerning

• Type a table defined clusters to hold configuration data - definition of default values for each element of the array

  Hello

  I was wondering if I could get some information and opinions on the use of an array of type defined clusters to store configuration data.  I am creating a program to test several EHR and wanted to have a control of type defined for each HAD with the information needed to create the DAQmx tasks for all signals for it must HAVE.  I am eager to do so that the data are encoded in hard and not in a file that the user might spoil.

  Controls of type def are then put into a Subvi who chooses as appropriate, one based on the enumeration of Type DUT connected to a case structure.

  I have problems with the control of the defined type.  I see issues when you try to save a configuration unique to each element of the array in the array of clusters.  Somehow, it worked at first, but now by clicking on "Operations on the data--> default font of the current value ' on individual elements of the cluster or the entire cluster (array element) does not save data when I re - open the command def.  What I am doing wrong?  I'm trying to do something with the berries of the clusters that I shouldn't do?

  I enclose one of the defined reference type controls.  I tried to change it bare to see if that helped, but no luck.

  To reproduce, change the resource string for the element 0 of the array and do the new value by default.  Then close the def of type, and then reopen it.  The old value is always present in this element.  The VI is saved in LabVIEW 2012.

  The values of a typedef are not proprigated to the instances of the control. They get if created WHEN data values have changed. They will be not updated with the changes to come. You must create a VI specifically to hardcode your values or to implement a file based initialization. The base file would be much better and more flexible. If you don't want users to change the data simply encryption. There is a wedding blowfish library that you can download.