Configure the Infiniband interface on virtual machine

Similar Questions

• How to configure the CD driver on the host for a virtual machine?

  After you create a virture machine and put the CD of driver on host, when powered on the vertual machine, may not start the drive form the CD only from NIC.

  How to configure the CD driver on the host for a virtual machine?

  Right-click on the virtual computer and go to edit settings. Click the Options tab and under the tip list, there should be Boot Options. Enter an amount of milliseconds to wait before your boot, so you can activate the CD-ROM. You can also activate the CD even if it boots to the NETWORK card option, and then reset the virtual machine. Get the focus of this virtual machine on the console session, and then press ctrl-alt-insert. Your CD-ROM will stay connected if you do not want to delay the startup process.

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• PowerCLI command to allow the decryption of a virtual machine

  How to allow the decryption of a virtual machine using powercli? It is one of the VMware Admin privilege.

  The ID of privilege for the privilege to "Allow the decryption of a virtual machine" is Virtualmachine.Configuration.Unlock

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-

• Free version of ESXi can support for configuration of start and stop virtual machines via vSphere Client?

  I have read and found some documents on ESXi.

  According to the documents, I know that ESXi free version does not support some advanced virtual machine configurations and does not support write to ESXi host permission. But when I download ESXi from vmware.com, I can't find the free version. He will always be a trial of the licensed version edition because I can always do the configuration of start and stop virtual machines via vSphere Client installation. I can also run scripts (lamw) pl in vMA to stop the ESXi host (authorization to write ok?)

  Then I confused. How can I get the really free version of ESXi? Or will the free version after 60 days of evaluation?

  Start/stop above configuration is in vSphere Client via 'Configuration'-> "start/stop VM"-> "Properties"... «-> "Allow the virtual computers start and stop automatically with the system" actions setting and stop virtual machines can be configured to "comments"turn off computer"or"Suspend".» Can any body tell me if it's supported by ESXi free edition?

  Is the free version of vSphere Client too? Because when I use the vSphere Client, he told me that I have 60 days of evaluation. This confused me again. I think that vSphere Client is always free, am I right?

  Any suggestion or advice is much appreciated.  ^_

  Micky

  Configuration of start and stop virtual machines is available with the free version and licensed, with the free version you would be configured everything via vSphere Client, where as with a licensed version, you can optionally use scripts to configure it and also issue restarts/stops using scripts.

  Second, shutdownHostViaSOAPAPICall.pl for the version licensed and free of ESX (i), this script will work in both free and licensed because it uses direct SOAP calls emulating the vSphere Client communication. Take a look at the documentation for details, but this of course is not supported by VMware.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Don't define the default directory for virtual machines

  Use VMware Player 3, how can I set the default directory for the VMS to be opened or created?

  Concerning

  Marius

  Open the preferences of the user (on Windows, % APPDATA%\VMware\preferences.ini).

  You want to add OR change the following line:

  -prefvmx.defaultVMPath =

  If this key is not in the file, add it and the full path that you want as the default value, the value on the right side

  -prefvmx.defaultVMPath = "C:\Thanksgiving\Ate\Too\Much".

  Now that the player can create virtual machines, it would be nice to have the user interface to specify the default directory for put/get those VMs

• How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Problem:  After I do a backup one using ghettoVCB on a local VMFS volume, I have a virtual machine that I can start something happened to that running.  However, sometimes I just need a file from the OS level, which means that I would need to start to get them, but then I have an IP address conflict.  I can't imagine a way to have the NICs turned off and still be able to move the file.  If I change the IP addresses, the software that I need to create the file that I need to transfer no longer works because, although there no need of constant connectivity to the seller, it is locked to the public IP address.

  Material:  I have two 4 ESXi hosts to work, each with local VMFS volumes.  They share a private vlan common and a vlan common public.  They each ssh, ftp, wput, wget, and rsync available.  I have a Windows 2003 Server VM which also hosts a NFS and the VI client and other VMWare tools.  It also has private and public interfaces as do virtual machines that would be to make and receive the OS files.

  Question:  How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Thank you!

  Yes Mr President, make sure you set the network on this virtual machine to be connected to the 'Internal' vswitch, you set up before turning the power on to the virtual machine.

  -

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• Get use of the resources of all virtual machines in a cluster

  Hello

  I have developed a measure of capacity management report that collects all the use of the resources of the virtual machines in a datacenter. The function that collects it looks like this:

  def hostMemoryConsumed =]

  def memoryConsumed = 0.0f

  def memoryGranted = 0.0f

  VMs. each() {}

  VM->

  try {}

  memoryConsumed += vm.host.memory.consumed.current.average / 1024.0f<----- how="" to="" do="" this="" to="" get="" from="">

  memoryGranted += vm.host.memory.capacity.current.average / 1024.0f

  }

  {} catch (NullPointerException e)

  }

  VMS is a function of type parameter VMS VMW

  The works above for virtual machines in the data center, but I need it to be after cluster. I can find a cluster of virtual machines, but I'm having trouble with referring to specific values for example consumed memory and capacity.

  If I change the type parameter: VMW Cluster how the metric reference would look like (see the try {})?

  I don't think that a query will help me.

  Thanks in advance

  Erik Alm

  If you want to do for a cluster, you can just get the list of virtual machines in a cluster of first and passing in your script.  If you have a function for a VMWCluster you can add a parameter for "vmwCluster" that is underneath and it should give you a table (topologyObjects) that has all the virtual machines in the cluster.

  QS = server.get ("QueryService") / / query Service

  tquery = qs.createStatement("!) (' VMWVirtualMachine where esxServer.parent.name = "+" ' "+ vmwCluster +" "" ") .setQueryTopologyObjects (true);

  topologyObjects = qs.executeStatement (tquery) .getTopologyObjects)

• VMware Fusion 6 Professional - where is the possibility of locking VMware using a single virtual machine and do not allow the creation of new virtual machines?

  This is a quote from the VMware Fusion Professional 6 product page:

  VMware Fusion 6 Professional comes with IT administration tools to help you deploy VMware Fusion using Apple or a management solution third Mac as of JAMF's Casper Suite. Further reduce the cost of support of Windows desktop using the mode of single virtual machine that limits user access to the library of the Virtual Machine, the ability to create virtual machines or migrate PCs and reduces the options of the menu.

  Where can I find these IT administration tools?  I want to block my VMware users to a single virtual machine so that they can not blow by creating new virtual machines, etc.

  How can I do this?

  Thank you!

  Glitch004,

  You could follow the steps to activate the single mode of VM:

  1. turn power off all running VMS and out the merger.

  2. Add the following line to/Library/Preferences/VMware Fusion / config

  installerDefaults.simplifiedUI = 'TRUE '.

  3 restart merger and you will find:

  . VM library is hide in the VM menu.

  . only one virtual machine can be used, while click second VM Fusion of the reports ' Unable to open document. "

  Best regards

  Shanghai

• What is the difference between a virtual machine cloning and v2v conversion to a virtual machine

  What is the difference between a virtual machine cloning and v2v conversion to a virtual machine

  Cloning process is to duplicate a VM. V2V is deploy vm on vsphere environment to another virtual machine format (example: the workstation, hyper-v).

• When you look at the performance of a virtual machine, when you make a graphic of 3 months it appears correctly for the first two, but the last month is compressed.

  When you look at the performance of a virtual machine, when you make a graphic of 3 months it appears correctly for the first two, but the last month is compressed.

  Hello

  When you say that the last two months are compressed. I do not have what exactly you mean by that. Is there a chance you can attach a screenshot of the same thing? Also let me know if there are any made VC-database activity recently?

• Modify the script for multiple virtual machines

  I'm working on the powercli user to change the CPU and the memory of several virtual machines.

  I found the perfect scenario created: http://ict-freak.nl/2010/05/07/powercli-script-to-schedule-memory-and-or-vcpu-updowngrade/comment-page-1/#comment-20336

  But it's only for 1 VM.

  Can someone tell me to change so do several virtual machines.  A text file would be ideal, but I'm ready for anything as this point, nothing I try does not work.

  Thank you.

  You could do

  foreach ($vm in Get-VM-name (Get-Content:\Powercli_scripts\servers.txt))

  I don't know why it's poweroffs randomly.

  You can add the - WhatIf parameter on this line, like that it will only say what he does, without actually running the cmdlet.

• Need a script to disable the copy/paste in virtual machines

  Need a script to disable the copy/paste in virtual machines

  =================

  Begin {}

  $disableCopy = "isolation.tools.copy.enable".
  $disableCopy_value = "false".
  $disablePaste = "isolation.tools.paste.enable".
  $disablePaste_value = "false".
  $disableGUI = "isolation.tools.setGUIOptions.enable".
  $disableGUI_value = "false".
  }

  {In process
  #Make of course, it's a virtual machine
  If ($_ - isnot [VMware.VimAutomation.Client20.VirtualMachineImpl]) {co continue}

  #Setup our object
  $vm = get-view $_. ID
  $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec
  $vmConfigSpec.extraconfig += new-Object VMware.Vim.optionvalue
  $vmConfigSpec.extraconfig += new-Object VMware.Vim.optionvalue
  $vmConfigSpec.extraconfig += new-Object VMware.Vim.optionvalue
  $vmConfigSpec.extraconfig [0]. Key = $disableCopy
  $vmConfigSpec.extraconfig [0]. Value = $disableCopy_value
  $vmConfigSpec.extraconfig [1]. Key = $disablePaste
  $vmConfigSpec.extraconfig [1]. Value = $disablePaste_value
  $vmConfigSpec.extraconfig [2]. Key = $disableGUI
  $vmConfigSpec.extraconfig [2]. Value = $disableGUI_value
  #Run change
  $vm. ReconfigVM ($vmConfigSpec)
  }

  =================

  The script above did not work. This script must run on VMs specified in a cluster that is mentioned.

  As long as vmhgfs is not installed in your virtual machines during the installation of the tools in 5.0, copy and paste between virtual machines is not enabled by default