confirmation box between different processes

Similar Questions

• vMotion between different processors

  On my last job, I had two clusters vmware, using four hosts with HP DL580 servers and the other with two hosts in a HP BLADE system, I don't remember the model.

  So when I tried to move an active VM for clusters to each other, I got an error, so I'm looking here on community and I got the awnser is the reason the hosts had different processors and I can only move this virtual machine, if they are closed. If I can only move cold VM between my cluster.

  OK im on a new company name and they had M$ Hyper-V and now we are migrating to VMWARE (cool ) we have two DELL Poweredge servers, one with two Quad-Core Xeon X 5470 and the other with two Xeon Quad - Core E5320.

  So I guess I'm having a problem of fact a vmotion hot between it because the servers have different processors.

  So im buying new processors, but I find only Xeon Quad-Core X 5365, I think that it corresponds to that of the X 5470 but with cache and diferrent clock.

  My ask is, can I do a hot Vmotion with some VM of a Xeon X 5470 server on a Xeon X 5365 server.

  Stability of Slackware, safety and simplicity are the best choice!

  Yes,

  the vmotion VMs between different generations of cpu is only posible to put these hosts using Enhanced VMotion (CVS).

  Improved compatibility for VMotion (EVC) simplifies VMotion compatibility issues

  through the generations of CPU. EVC automatically configures the server with Intel CPU

  FlexMigration or AMD - V extended Migration technologies

  compatible with the old servers. After EVC is enabled for a cluster in the

  VirtualCenter inventory, all hosts in this cluster are configured to

  present identical CPU features and compatibility for VMotion CPU. The

  features introduced by each host are determined by selecting a predefined EVC

  base line. VirtualCenter does not allow the addition of hosts that cannot be

  automatically configured to be compatible with EVC baseline.

  To use CVS, you must run ESX Server 3.5 Update 2 or

  highest with Virtual Center 2.5 Update 2 or higher and have only compatible CPUs

  are listed in one of the following tables.

  CVS does not allow for migration with VMotion between Intel and AMD processors.*

  VCA makes it much

  easier to add servers with the new generation of processors in existing clusters

  containing a material more former generation. Entering an EVC cluster servers are

  automatically configured to be compatible with the hosts already in the

  clusters. Since this process is automatic, EVC is very simple to use and

  requires no expertise on CPU features and masks.

  Suresh

• Pass the value of form field into the message of confirmation box

  Hello
  
  I created a confirmation box that fires when a user presses a button on the form.
  
  Under "URL redirection" button, I have the following:
  
  JavaScript:confirmDelete('Please_Confirm_Reduction_of_Call_Off_Pick_requirement.','REDUCE_CALL_OFF');
  
  This in turn calls a PLSQL process that perform a database update for a form called P4_PICK_LINE text field
  
  Is that I would have to include the P4_PICK_LINE in the confirmation message, i.e. "Please confirm reduction of call off sampling requirement pick123' where pick123 is the value of P4_PICK_LINE
  
  I know that I can pass in variables like session & APP_USER. etc in the message of confirmation, but not sure about text form element values.
  
  I use the apex 4.0.0.00.46 on windows version 7.
  
  Any help would be great
  
  
  Thank you
  Chris
  
  Edited by: Cashy on 05-Sep-2012 03:44

  javascript:confirmDelete('Please confirm reduction of call off pick requirement ' + $v('P4_PICK_LINE'),'REDUCE_CALL_OFF');
  

  A complete list of javascript API functions can be found here: http://docs.oracle.com/cd/E10513_01/doc/apirefs.310/e12855/javascript_api.htm

  You may not use session variables unless your variables are sent to the server. As long as you don't offer you will rely on javascript ;)

  Concerning

  Nico

• How do I sync and import/export bookmarks between different users on the same computer and two using the Firefox browser?

  All the help instructions are to import and export bookmarks bookmarks between different brands of browsers.

  Assuming that each of these different users use a different profile of Firefox. You can use the built in Fx4 Sync feature. Click on Setup Sync in the menu selections, create an account and then have each user created their profile to use this new account synchronization. It syncs more bookmarks; things like history, passwords, etc. So if it's only the bookmarks you are concerned with that, use customize only synchronize bookmarks when you set up each user. Good luck and have fun in sync.

• Script for random switch between different waveforms

  Hello.

  How correctly to write the script to switch between different waveforms when generating?

  For example:
  We use the niFgen allocate named Waveform VI to allocate three waveforms. When you run the generator, the first forms of wave of work. Then the generator is activated and used in the following waveforms only second and third.

  Or, we have configured 10 waveformsand by train to spend no fixed cyclically between everyone, but only between 2 and 5 waveforms.

  If it is possible to achieve?

  Max O.

  Developer of software and engineering,

  TeSLa.

  Hi Max,.

  Each stage needs, too.  End ifs should take place at the end.  For example:

  If scriptTrigger0
  
      generate a myWfm0
  
  on the other
  
      If scriptTrigger1
  
          generate a myWfm1
  
      on the other
  
          If scriptTrigger2
  
              generate a myWfm2
  
          on the other
  
              / etc...
  
          end if
  
      end if
  
  end if

  Of course, it must all be encapsulated in a repeated structure to continue checking for triggers.

  Kind regards

• The same drive letter may point to different locations for different processes?

  The same drive letter may point to different locations for different processes?

  Our users have the E: drive mapped to one place. But I need a scheduled task in order to use the E: drive to point to a different location at the same time, without affecting the mapping of moose for logged in users.

  There is no work around this need of ours. This is because users are working 24 X 7 update of our data files on the E: drive, and a log file is made. We plan prevent users for a minute every night while move us / save the log file and then allow users of the resume and allow a new log file to create. Then take the saved log file and apply it to a real set of monthly backup of data files, so the backup files will be ready for a recovery after disaster. The program that applies the transactions recorded in the data files is able to apply operations to files that are considered as being in the same exact location.

  I know that's not possible without resorting to the application logs a set of files on a completely different machine. But I ask.

  Thank you

  Dan

  Hello

  The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that helps!

• confirmation box

  I use two monitors to my SCADA application. Is there a way to change the position where the confirmation box popups so it doesn't have to be divided into two monitors?

  The position of the confirmation box can be customized.

• Works with Windows XP SP2 with IE8. A Norton 360 process ccSvcHst.exe CPU consumption. Upgraded to version 4.0.__Now IE8 Norton is very unstable, different processes consuming CPU even with turned off Norton. __

  I opened a folder support with Norton a couple of days, for a problem with ccSvcHst.exe cripling process my system by consuming my CPU.  I found that it was a common problem, and so I wanted Norton to solve.  Their guy accesed my remote system support and made a few changes to my configuration utility and my registry files and then upgraded my version of their latest version 4.0

  After the end of the support session, I finally restarted my system and encountered an error on my configuration utility being in a State of diagnosis, then that I should put it in a normal mode and restart again.  I noticed that it had disabled the start of my services.  I selected a normal startup and restarted.

  The problem with ccSvcHst.exe consuming my CPU is now resolved - be replaced by different processes consuming my CPU and use of extremely heavy memory (or misuse).  Faulty processes are mostly explorer.exe and iexplore.exe.  Not only that, but this current problem exists even when I turn off Norton.  I tried you connecting another deal with them, but they will not address the issue, since the problem (now) exist even without Norton running.  So, basically, they made the problem worse and then pushed him on Microsoft to resolve the issue.  It's really nice...

  Anyone have any ideas?

  It seems that your computer is infected. I get this from the fact that iexplore.exe (Internet Explorer) is running. If you haven't started IE yourself, then it is a clear symptom of malware infection.

  Through these generals the malware removal not systematically - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

  http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
  http://tinyurl.com/yoeru3 - download link and further instructions

  When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• How to share data in the applications between different accounts of microsoft on the same PC

  Hi, I had been using windows 8 for over a month and that you have installed a * a lot of apps on the store. Now, I have to create a separate account from microsoft on the same PC. After having created, I find no way to use apps from windows of the older account store. And, certainly, I don't want to re-download applications for use on the new account. Is there a way to share data between different accounts on the same PC selected app? Thanks in advance, Praveen.

  Hi Samuel,.

  This is a free support. However, let me provide you with assistance on the issue of not being able to use the MS Office product on different user accounts. See the articles that describe how an application installed as MS Office can be used on another user account:

  Find and start Office applications in Windows 8 or Windows RT

  Also, for your further reference:

  Application does not appear on the start screen after the passage to another user

  I hope this helps. If you need additional help, then just reply back. Also, if you are faced with other problems related to Windows, it would be better to start a new thread of your own instead of posting in the thread on the other so that the new thread is no longer visible to the community.

• data between different forms IE workorder number even workorder number forms

  Hi I'm looking for examples to convey a work order number, date etc. between different PDF files, I is according to what is the demand for maintenance, which will require different forms to fill out.  I didn't understand it before, but it can be done using fdf.  Someone has suggestions, examples

  Thank you

  Mike

  1. draw 2 different shapes with the SAME domain name. Page layout is not important.

  2. export FDF to a filled in file.

  3. import the FDF in the other file.

  If you do not find these functions please let us know your version of Acrobat Pro.

• Brushes dialog box is different and sets of missing staff

  I worked in 2015 CC PS last night and it worked very well.

  This morning I raise PS again and all of a sudden, it seems that my brushes dialog box is different. I can't find a way to load my personal brush games I down to the left.

  

  Help!

  A I touched a button rogue again?

  TIA!

  See you soon,.

  Lisa

  You are still in the Panel forms. Switch to the preset Panel and try again. This is the tab directly to the right of brushes (or use the button on the 2nd line).

• JavaFX dialog box (confirmation box) is that the user cannot move forward.

  I want my application in JavaFX make up a dialog (such as the confirmation box).

  But I don't want to chance user to ignore that one.

  Does it mean that in many instances that I saw once the dialog box context-sensitive user can click on that and can ignored, so this dialog box's rest as it is never.

  Thank you.

  Dial stage.initModality (Modality.APPLICATION_MODAL), which "Defines a modal window that blocks the events to any other application window."

• replication between different versions of ESXi vSphere

  Hi all

  Is it possible to use replication between different versions of ESXi vSphere? the scenario is as follows.

  Source site:

  vCenter 6

  RS 6

  Replication Unit 6

  5.5 ESXi

  The target site:

  vCenter 6

  RS 6

  Replication Unit 6

  6 ESXi

  I understand that vCenter, SRM and VRA must match and vSphere replication 6 is compatible with ESXi 5 upwards and it is the vSphere host in the source location that replicates on the VRA rather than a host of ESXi target so it should work, but I wanted a certain Yes/No.

  Thank you

  Definite yes.

  VMware product interoperability matrices

  

• How warns we reconnect when switching in demand between different module in 6.1.1.1.11?

  How warns we reconnect when switching in demand between different module in 6.1.1.1.11?

  Please, help me to understand this or fix it?

  Be sure to check that your containing remote access service is running. If it's not, restart the service and if it breaks down again, check the event logs.

  Ensure that the AuthenticationBridgeService is enabled in your EnvironmentSettings.config, and the user to remote access container is configured by using the SetupAssistant.

  
           
                 
           
          
           
               
  ....
  

  If the remote container Service fails, please contact Support with precision since the event logs.

• JavaScript Confirm box depends on the results of query

  Hello
  
  I use Apex version 3.2.1 and I'm looking for a way to do the following, any help much appreciated:
  
  A javascript confirm will appear when the user sends a page if the result of a query returns something, the query should look like this...
  
  SELECT * FROM LINKEDPROJECTS
  WHERE ENV_ID =: P18_ENV_ID
  AND ID_COMP =: P18_COMP_ID
  AND DATE_FROM < = to_date (: P18_DATE_TO, 'DD-MON-YY')
  AND DATE_TO > = to_date (: P18_DATE_FROM, 'DD-MON-YY')
  
  If it returns no data page will present as usual, if it does not return the data from the confirmation box will appear, and the message will be also the result of a query-driven.
  
  If the message would be something like...
  
  Project (s) + "select the NAME OF PROJECTS WHERE ID IN (SELECT PROJ_ID FROM LINKEDPROJECTS WHERE ENV_ID =: P18_ENV_ID +)"
  + AND IDENTIFIANT_COMPOSANT =: P18_COMP_ID +.
  + AND DATE_FROM < = to_date(:P18_DATE_TO, 'DD-MON-YY') +.
  + AND DATE_TO > = to_date (: P18_DATE_FROM, ' MON-JJ-AA "") "+ have this environment for the dates you selected.  Do you want to continue with the reservation?
  
  By selecting Yes submits the page, select no hands it to the page.

  Had this work now, if it can help someone else out there that's what looked like my javascript in the end...