Confirmation of the closing report window

Similar Questions

• IPMTB-TK (Truckee): PC based on the temperature of the CPU report Windows App for IPMTB-TK (Truckee)

  Find out how you can see the temperature of your processor in Pre-Boot BIOS menus?  Is it possible to do within Windows?  I do sometimes video transcoding, which pegs the CPU and I wanted to see how hot the CPU gets while to see if I need to replace the tough, but stock, CPU cooler provided with my e9280t.  I worked with Gigabyte motherboards before, and their EasyTune, while only overkill for what I'm looking for, gives a reading of CPU temp.  (For the record, do not try to install EasyTune on PC based on an IPMTB-TK, you'll give yourself a heart attack when your PC crashes when installing [hopefully he will recover just fine.])  Is there an app that will do what I want and works with a card mother IPMTB-TK?

  I myself crack.  I'm ready to install an application especially designed for another motherboard, but I don't think Google "CPU Temp".  In doing so, I found 'Core Temp' (http://www.alcpu.com/CoreTemp/) which is exactly what I was looking for.

• WiFi pilot slows down the closing of Windows 7

  Since I installed the new driver for Ralink Wireless LAN RT3572, it slowed the computer "Shut Down" for more than two minutes, I can't compromise uninstall it because it connects to 3 times the speed of the former driver, is there a work around for this annoying question?

  Changing the value of 'WaitToKillServiceTimeOut' in the registry did not a thing. Disabling all other programs and start-up services did nothing either, only by uninstalling the driver Wi - Fi done shuts Windows down without any delay.

  Hello

  Check with any 3rd part antivirus/security program where there is a conflict with a
  of them. You can reinstall the driver and uninstall 3rd party antivirus then
  Run the removal of its creator tool to see if that clears the issue. Use the clean boot method
  to see if any conflict can be determined. (Even if the chances are, it's the driver itself.)

  MyEventViewer can be verified at the time of the event within a second or so of the
  time of the event to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it a bit before and after the time of the event.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  =========================================================

  RALink is now Mediatek.

  You must contact Ralink/Mediatek support and/or the manufacturer of the device OEM otherwise Ralink
  as there is obviously a problem with this driver. If there is also a separate device OEM manufacturer
  check in their forums (if any) for known issues.

  RALink
  http://www.ralinktech.com/en/index.php

  MediaTek
  http://www.MediaTek.com/en/

  RALink - Support and downloads (check with the system manufacturer Maker/motherboard or the)
  1 real device manufacturer.)
  http://www.ralinktech.com/en/04_support/support.php?SN=500

  MediaTek - Downloads - drivers and Firmware (check with system Maker/motherboard
  Producer or manufacturer of the 1st real device.)
  http://www.MediaTek.com/en/downloads/

  MediaTek - contact us
  http://www.MediaTek.com/en/about/contact/?contact=WiFi-technical-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• E709 HP6500 wireless no impression or the closing of Windows 7

  For some reason, my printer is not printing and it has been.  When I print a document, it shows in Quebec; However never prints.  I tried to unplug, did not work.  I think I tried to use the button to turn the printer off, and after a very long time to say close I unplugged.  How can I fix it?  Is there some kind of rebate to zero, or something?

  The printer can unplug the router if the router traffic is noticeable, if the router is old, or if the distance between the router and the printer is important (between 3 and 6 feet is the length suggested between the printer and the router, and no walls should not interfere). By turning all market from time to time will refresh both devices, maintain a stronger wireless connection.

  If my troubleshooting has helped solve the problem, please mark my messages that you liked with congratulations and acceptable Solution while others may find this information easily. If you have any questions or concerns, please let me know.

  Mario

• Need help in activating the copy of Windows

  Original title: G ' Day, Ref. - Activation.

  G ' Day,.

  REF - Activation.

  Recently, my office computer is turned off for a few days.
  When started again, a pop-up window has advised that the computer should be
  activated within 3 days, because a significant detected Microsoft program
  changes made to the computer.
  The OS is windows XP, SP2.
  The computer has never been connected to the internet and has never been
  infected by bad guys.

  NOTE: there were NO hardware changes or software on this computer.
  Note: this computer has been properly registered and activated when built a few years ago.
  Note: the great inconvenience will be caused to me this computer should be stopped.

  Q1 - why did this request to activate?
  Q2 - what will happen if this request to reactivate is ignored?
  Q3 - What Microsoft suggest is done now?

  Please answer emergency email.

  See you soon,.
  Stuart.

  Don't know what is causing the problem, but you should be able to re - activate by phone.

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• Product key does not validate the reinstallation of Windows XP.

  Original title: validation after reinstall.

  I had to wipe the hard drive of my laptop and re - install xp media a friend disc ed.

  Laptop was supplied with xp media ed installed in 2005, but the product to the rear of the machine key now does not match the key on disk

  How to validate the new facility to access updates etc?

  Thanks for yr help

  Jon S

  Your friends drive is most likely a "Retail" XP version which has its own product key. In most cases, you can reinstall XP using 'Reticular' media and then activate with your OEM. Is that what you did?

  ============================================

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• Problem with the reinstallation of Windows XP Edition family, but the product key does not work

  I want to reinstall windows xp family, but why my legal product key does not work? IM using it in a computer.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• How do I see what is in the report for the installation of windows 7

  I'm trying to upgrade from vista ultimate to windows 7 64-bit system when I run the install disc it stops and tells me to take the following measures and that a report is on my desk but there is nothing there, where I can find the infopmation

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• When I click to open thunderbird but the e-mail window does not appear until the icon shows the app closed, how to fix this?

  To start thunderbird, I click on the quick start on my toolbar icon, it highlights that if beginner, then a few seconds later, returns to the closed state. No e-mail window never appears on the screen. When I check the Task Manager, thunderbird does not appear in the list of running applications, but one or two processes show running on the Details tab (one first process by clicking on the icon, and then another if I right click and try to open one of the windows in option). I am running Windows 8.1. It worked well earlier in the day, so I have no idea what happened past. Restart the PC does not help the issue. How can I get the windows thunderbird appears on the screen again? If I can't, please send the instructions to backup all the associated email and address profile information so I did not lose anything... then uninstall and reinstall thunderbird and restore all the info related to my current profile. Thank you.

  Thanks for the reply... still not sure what happened, but I ended up uninstalling and reinstalling bird t. Everything is back to normal after that. So your solution can work, but I don't have the chance to try it. My solution, but is not ideal, was effective and the problem was solved.

• reopen the closed windows

  After closing a window, I'll more later to open a new window, but it opens again the window I initially closed before, including the history of the page.
  Why my windows do not open to my home page?
  It's new. I have not changed the settings and I can't find any setting to help me with this.

  Hi bikeman563,
  If the parameter does not help in return: How to fix preferences that will not save

• Envy 17 Notbeook PC: SimplePass always asking to confirm the password on Windows 10

  Since the upgrade to Windows Pro 10, about a week ago, this happens whenever I try to drag to connect with SimplePass: I get a dialog box asking me to confirm my Windows password. I have to enter twice, and this works for me to open a session, it's boring. Why should I use SimplePass to save time logging if it asks me to enter my password TWICE?

  I've never had happen before moving on to Windows 10 and now it happens every time.

  I solved this problem on my machine.

  I went to the control panel in windows and clicked on element for HP SimplePass. He forced me to drag the fingerprint reader to continue.

  Once on the HP SimplePass screen came, I noticed in the upper-right icon (to the left of the help symbol) that looked like a laptop.

  

  By clicking on this icon checked for an update update was available, and he confirmed that I downloaded and installed. After the restart, I had actually had to go back to HP SimplePass in Panel configuration, and then click settings and change it to add my fingerprint.

  

  It now seems to work for me.

• I have a new MacBook Pro 13 "." When you click on almost ANYTHING, I get a drop-down menu, rather than the simple task. This includes a link to closing a window, writing a message of openness. Whatever it is. I've updated to 10.11.2.

  I have a new MacBook Pro 13 "." When you click on almost ANYTHING, I get a drop-down menu, rather than the simple task. This includes a link to closing a window, writing a message of openness. Nothing, including the drafting of this issue. A screenshot is included. I've updated to 10.11.2.

  Thank you!

  Bill Koechling

  

  Is it possible that you accidentally tap the touchpad with 2 fingers?

  Try to go to the preferences system-> Trackpad-> point & click and disable the "Secondary click" item Or change one option other than water from the tap 2 fingers.

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• I bought the upgrade to windows 7 paid tax of $ 15 21 and I still havnt received confirmation of delivery.

  I bought the upgrade to windows 7 paid tax of $ 15 21 and I still havnt received delivery confirmation .is - what someone else having this problem

  Hello

  Welcome to the Microsoft Vista answers Forum!

  Note: For details of delivery you must contact the customer assistance service.

  To contact customer care using the information provided in the link

  http://support.Microsoft.com/default.aspx?scid=fh;en-us; CNTACTMS

  For more information please contact Microsoft store.

  http://store.Microsoft.com/help

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar. I have -Microsoft technical support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• PC can not stop correctly displays the "Closing Windows" screen.

  Original title: PC may not shut down properly.

  Yesterday I did re-installed Windows XP Prof SP2 on my PC. But after installed finished I shutdown problem. Stopping process cannot not completely done. My PC still running and the monitor displays "Windows is shutting down" in the blue screen. The power light, but the fans, fan of processors still running. So I push power swicth to close my PC.

  How can I solve this problem?

  Hi jhoniegudel,

  In order to diagnose the problem, you can check in the event viewer if there is no error code/message.

  For more information, refer to this link: How to view and manage the event logs in in Windows XP Event Viewer

  You can follow this link & check if the problem persists:

  Windows stops responding during Windows XP shut down

  
  Reference: Advanced Troubleshooting for the shutdown in Windows XP problems

  Because you have reinstalled Windows XP have confirmed that your computer is updated with the latest drivers, firmware and updates of BIOS from the manufacturer?

  Hope the helps of information.