Why the output on my iMac sound decreased significantly?

Similar Questions

• Why the outputs that are grouped in a waveform chart in a loop of Simulation show distortion?

  Is anyone know why the outputs that are grouped in a graphic waveform distortion to see the Simulation loop unlike these forms of output wave that are placed individually in each waveform graph Microsoft Graph?

  
  

• Why the output signal is pulled up to stop the program in RT

  I use 9401 output a PWM signal. When I run the program FPGA and the stop, it does nothing statement. BUT when I run the program through RT using the compiled bitfile and stop, there will be a high level of 110ms.

  Here's my diagrams FPGA and RT of a simple signal output.

  I wonder why this could happen? Should I observe all specific during the programming of the RT?

  Thanks in advance

  

  You can add logic to ensure that the output goes low when the judgment is TRUE within your unique Timed Cycle loop.  My guess is that you just see a delay between when the FPGA is ordered to stop and when the file bit is actually closed and the FPGA is reset.

• why the output is 1. can someone explain

  What is the result of the following

  StringBuffer sb1 = new StringBuffer("Amit");

  StringBuffer sb2 = new StringBuffer("Amit");

  String ss1 = 'Amit';

  System.out.println(sb1==SB2);

  System.out.println (sb1. Equals (SB2));

  System.out.println (sb1. Equals (SS1));

  System.out.println ("Poddar". Substring (3));

  
  

  
  

  
  

  Years:
  (a) false
  fake
  fake
  Dar
  (b) false
  true
  fake
  Poddar
  (c) compiler error
  (d) true
  true
  fake
  Dar

  
  

  Correct A

  Can someone explain why the answer is?
  

  try to create a sampling program and run u will know.

  equal to equal is method in the string class.

• CS4: Clearly the source, but the motion blur of the output gives the export

  Hello!

  When exporting my videos imported into CS4, quick movement appears blurry, even if the source is much clearer.

  Demo 1: Source, output
  Demo 2: Source, output

  I was hoping someone could explain to me why the output is much more blurred and if possible, how to fix it.

  Sequence options:
  I tried a bunch of sequence different presets such as AVCHD/AVC-Intra/HDV/XDCAM/P2, or custom options (parameter FPS to 29.97, 30, 59.94, 60 fields/up/down, change the display format), but the output is blurry, no matter what I try. Made with upper/lower case fields does not; so the progressive setting is probably correct.

  I have also created a project without a sequence, imported the clip and it has exported directly; the output was still unclear.

  Export options:
  I used recommended an export preset for export on Vimeo (see paragraph CS4), which uses the H.264.

  Information about the source clips:
  They are filmed with my GoPro Hero HD cam to 720 p 60.
  MediaInfo output: video, audio
  Output of GSpot
  Interpretation of the creation of a clip

  My system:
  Windows 7. 4 GB of Ram, but 32 bits, up to 2.8 GB of RAM is used.
  Intel Core i3 550, 3.20 GHz
  Video card: Nvidia Geforce 8800GTS 320 MB of RAM
  1 monitor

  I hope that this information is sufficient, please let me know if there is anything I should add.
  Even if it is not possible to fix it, I hope someone can explain to me why the output is so different from the source!

  Thank you!

• My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

  My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

  It was AC off recently?

• Does anyone have a work around for the design on PowerMac G5 2005 flaw that causes noise interference on the outputs? (Audiophile, sound engineer)

  OK, here's my problem - I have a set of audio interface Protools Digi 002 via Firewire 400 on a PowerMac G5 I was lucky enough to be given last year. I finally managed to connect my home recording studio system, he wire of mixer etc, but when I listen to the music coming from the outputs of the Digi 002 there in a great cacophony of audio interference, so much and so well, when I mount the system I can move my pointer between two monitors and it plays a different frequency of buzz. Everytime I open a window, Soft etc it is more electronic noise.

  He took a while to limit, but after reading this excerpt from wikipedia, it seems that it was a fault common to this particular model until Apple released the revised version of the B of the G5 (?);

  ' The first versions of the dual processor G5 have problems of noise . The first is ground loop- based interference,^[5] that sometimes causes noise seeps into the outputs audio analogue. This bug has been fixed in Rev. B G5.'

  and

  ' Well that the noise problems do not prevent computers affected work, they asked problems for audio professionals and enthusiasts as well, especially for models to liquid cooling, which had been expressly designed as mechanically quiet for listeners. "

  Well, that's no euphemism - in fact it makes the mac completely useless for my needs, I need the outputs clean digital noise to send for outboard effects/EQ/etc.

  As it was a common fault, I was hoping someone might be able to shed some light on a workaround solution, as I can't imagine recording ground studios just stop until this has been fixed by releasing a new G5?

  The only idea that I came up with so far is to buy a transformer of isolation, but I'm not entirely convinced that will solve the problem?

  Any help on this would be greatly appreciated!

  Thanks in advance

  Have you tried CHUD Tools & turn off NAP mode?

  The first versions of the dual processor G5 have problems of noise . The first is ground loop- based interference,^[5] , which causes sometimes analog audio output sound leaks. This bug has been fixed in Rev. B G5.

  The second problem of noise came from his "tweets", which can be triggered by power fluctuations. For example, display or hide the Dock makes a short beep. Many blamed the power supply used in the G5 as the cause, but this theory has never been confirmed. A very effective workaround is to disable microprocessors 'siesta' using Apple CHUD Tools, but this was not recommended by Apple. This noise problem has not set until the generation of dual-core G5s was produced, but it does not affect the model of "Late 2004" (at least there have never been reports). Draw of power fluctuation has been later attributed to the lack of power management features in processors simple heart. ^[6] Apple eventually posted information bug tweets on its support site. ^[7]

  Although noise problems did not prevent the computers assigned to work, they were problematic for audio professionals and enthusiasts as well, especially for models with cooling liquid, which had been expressly designed as mechanically quiet for listeners.

  https://en.Wikipedia.org/wiki/Power_Mac_G5

  Just one last note on the use of CHUD tools to disable the 'Nap' on the G5 Dual functionality: restart your machine reactive 'Nap '. You may have already seen this on the Apple forums. Kind of a bummer - although I rarely shut down my machine. In any case, running with 'Nap' off today seems to have resulted in a significant increase in general speed/responsiveness for me (I'm still running the stock 512 MB RAM, with another 1 GB on the way).

  «Matthew S.»

  http://www.xlr8yourmac.com/G5/G5_noise_tips.html

• Satellite A660, no sound on the output jack (Windows7)

  Hello

  In recent weeks the sound driver of my A660 behaves strangely. The built-in speakers are fine, the problem appears when I plug a cable jack, either if it's a listener or a 2.1 speakers. The system realizes I have something connected, the built-in speakers remain silent (as well as the unit on the output jack), and when I take off the cable jack built-in speakers running again. The problem is clearly with the software/driver, as it appears only in the windows, everything works fine under Ubuntu.

  I'm on Windows7, and everything is up-to-date. Deactivation and reactivation later the pilot "High definition Audio Device" do not resolve the problem, but also reinstall the latest version of the driver found on the Toshiba site. What could be the problem and how can I solve this problem?

  Have you checked if the helmet appear in
  Panel of-> sound-> the Read tab
  and are marked as default device?

  If do the helmet must be selected as the default device.

• Why the 66 java update will not install on my iMac with el capitan?

  Why the 66 java update will not install on my iMac with el capitan?

  I recommend that you work with Oracle to see if they are aware of any problems with El Capitan, Java is their product and they would know better. But I was able to find this, it might help you:

  https://oliverdowling.com.au/2015/10/09/oracles-JDK-8-on-Mac-OS-x-El-Capitan/

  BTW, is there a reason you need Java?

• MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?

  MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?

  Hello DebbieMarronYM,

  I suggest watching this thread where the poster had the same problem:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/have-image-but-no-sound-when-playing-DVDs-with/211a9bfa-5d94-4CE1-AE95-84307ffdf20a
  Mind post x which is currently marked as an answer a lot of different solutions that can be useful.

• Using of Print Production-> preview of the output to display individual departures, will result in severe display on the new iMac problems

  With the help of Print Production-> preview of the output for display in Acrobat DC 2015 separations, with separations selected/disable-selected causes strange color changes, deselected szeps sometimes do not disappear, must leave Acrobat and restarts repeatedly.  Race 2 new 27 "iMac, 10.11.3 & 10.10.5, same problems as computers, Acrobat DC is now useless for us, issues/fixes known?

  Hello

  We have today published a fix that solves the problem of the release preview which was recently introduced (with May 10 release). If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

  More details about this release and bug fixes is available here: help Acrobat | Release notes | DC Acrobat, Acrobat Reader DC | Update

  Please give it a try and let us know.

  Thank you

  -ashu

• How to decrease the output volume of the .wav file to a speaker attached to the output NI 9263 module

  Hello

  I found an example of http://zone.ni.com/devzone/cda/epd/p/id/4182 and edited for my purposes. On this basis, I have 16-bit mono speech files with sampling rate of 16 kHz for a speaker attached to the output NI 9263 module. However, this forum is without volume control and the result is extremely strong. I have attached photos of my diagrams below.

  NDS read Wave File.vi returns a 1 d mono 16‑bit whole array. I multiplied this table by a command button, so I could adjust the constant which I multiply with the table 1 d as I thought that the size of integers are related to the amplitude of the signal. However, reducing the constant only reduces the quality of the word and is still very strong.

  Is it the right approach to reduce the volume? And if not, what? Thanks in advance

  Yawei7 wrote:

  I thought that the size of integers are related to the amplitude of the signal.

  It's quite right...!
  And your approach is perfect...!

• Why the performance decrease after installing updates...

  Ideas

  • You have problems with programs
  • Error messages
  • Recent changes made to your computer: i want to know that why the OS performance begins fall after some time its installation .i want to know what's due to updates or is - it something else causing my laptop startup time and performance fall as new updates are installing...
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello Raghav Kabra,

  Thank you for your message.  To clarify, is the performance of your computer when you install/download updates Windows or after you have started for the first time trolling, because updates have taken effect?  If this is the case, the reasons could be:
  1. in the download, you'll be using your internet connection, which will slow down your bandwidth as well as the use of processing power to perform the update.  A little dip lag or performance would not be out of the question here.
  2 when you install updates, the processor will work to install the necessary files that have been downloaded on your computer which may cause a dip in performance.
  3. When you start your computer for the first time after an update, you may experience a longer period of logon, because the computer to initialize all the updates that you have just downloaded and installed.
  If you encounter a performance problem, every time that you start your computer, you may need to make some changes that will allow your computer to work optimally.
  Click HERE for some useful methods for better performance on your system.
  Please let us know if it did or did not answer your question.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Newbee question: why a RTF model increases the size of the cells on the output

  We are new to BI publisher and work to the conversion of our custom reports to BI Publisher crystal. We currently use PeopleSoft 9.1 with 8.51.12 tools and are about to upgrade to 9.2 next year. Our office of BI Publisher comes bundled with peopleSoft and that our version of BI Publisher Core is 10.1.3.4.1. Then we use Office 2013. I started to look into these reports and found something that I do not understand:

  When you add a simple table to the model, the filling of a field and running an overview pdf size are increased and spacing is added above and below the text. I looked through all the spacing options I know, but can't seem to find where I can change this.

  

  Any suggestion will be appreciated...

  Thanks for the files.

  Data from the xml structure is to have a new line of character as below

  Instead of

  and if the additional lines were added in the output.

  To avoid this, you need to cut the space beginning and end.

  So, to add the syntax like

  and the result will be like this

  

• The use of sound in Flash. Why the sound stay synchronized when I publish?

  I worked with the sound for a while trying to get it right to put it on YouTube. I finally got that sound worked in Flash. When I export to video I liquidate the lack of synchronization with sound. It does no londer faithful to the Flash program. Does anyone have a useful understanding?

  It is possible to use ActionScript, but unless it is really necessary with your workflow, since you already know how this method works, I recommend sticking with the applicant in the timeline but then check your sound properties in the properties panel, and switch between the different options (I think there are 3 options) to see which gives you the most accurate result.  An event, a flow, and I do not remember one 3rd.  You will also want to go into the settings of your SWF publish and choose appropriate or any export options that called for sound.  There are 2 fields that are stacked on each other and you must set the properties in addition to the default value, if your default settings do not work for you.

  Let us know how make you out with these changes.