Conflicts of project using SVN

Similar Questions

• How can I import documents in an FCP project, using the DVD player connected to a MacBook Pro 10.10.5 Super player?

  How can I import documents in an FCP project, using the DVD player connected to a MacBook Pro 10.10.5 Super player?

  You need to rip a DVD? Try MPEG Streamclip or brake hand. Both free. Streamclip better, but much more complicated to install and use.

• How can I change my BB10 project uses a makefile?

  I recently created a new Blackberry Momentics project and it works fine from the IDE, but I need to be able to build the command-line with a Makefile. I ran 'make' in the Terminal, but encountered an error because the Makefile does not exist.

  I checked the sample applications I have been watching, and they have all of the makefiles. I found a few sources that say you can choose whether you use a managed version or a makefile when you create the project, but I have not found any this option in the latest version of Momentics (2.1). I tried to change this setting in the properties for the project, but the constructor parameters of generation slot C/C++ are grayed out.

  How can I change my BB10 project uses a makefile? If this is not possible, how can I require a new project to use a Makefile rather than a managed build?

  I realized that my problem was a little more specific than I thought, as happens only in OSX while trying to use a Makefile for a native Core project.

  I posted my solution on Stack Overflow, here: http://stackoverflow.com/questions/25192787/how-can-i-change-my-bb10-project-to-use-a-makefile/25333...

• How to implement a local SOA/BPM project using remote resources via VPN

  Hello world

  Sorry for the dummy question, but I am a beginner and I'm in trouble with this problem.

  This is the scenario: I have to carry a BPM project using JDev 11.1.1.7 on my local environment and then deploy them on remote servers via VPN where a development environment is configured.

  All services are on remote servers.

  My question is: what I put up in my local environment?

  1 DB connection (distance connettion)

  2 configuration of MDS to share components?

  3 WebLogic server?

  3. what else?

  Any link o idea to share?

  Thank you.

  Fairlie

  Hello

  If you need to deploy and test in your front room to deploy remotely, then you will need to set up all the people in your premises + SOA Suite... If you need to do is put on your local, but can check remotely, you only JDev and connections...

  See you soon,.

  Vlad

• Can we look for projects using priority?

  Hello

  Can we look for projects using priority?

  Concerning

  REDA

  Hello

  You can not. Priority is not a search criterion in all search screens.

  Thank you

  Gene

• Deployed Adobe CC 2014 32 bits to our neighborhood. Students launch Adobe Flash Professional and are able to start a project using ActionScript 2.0. But as soon as they click on save and try to save their project... boom... an error occurs "met with an in

  Deployed Adobe CC 2014 32 bits to our neighborhood. Students launch Adobe Flash Professional and are able to start a project using ActionScript 2.0. But as soon as they click on save and try to save their project... boom... an error occurs "met with an invalid argument' it happens to any student and any computer. Help, please!

  They can only use the old Adobe CS5 flash professional because it does not crash.

  Thank you

  Raul

  [email protected]

  CC for flash doesn't support AS2, so perhaps that is the reason.  CS6 (or earlier version) supports AS2.

• My project will not move past slide 7.  I created a new project using a ppt presentation and the porject won't move past slide 7 even in preview.  Help?

  My project will not move past slide 7.  I created a new project using a ppt presentation and the porject won't move past slide 7 even in preview.  Help?

  I was pulling the presentation ppt to a network drive, so he didn't fully assume.  I saved the presentation on my desk and imported again and it worked fine.

• I just remdered and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  "When I try to open this file and start a new project using tha the intro file, I get an error.

  I just made and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  When I try to open this file and start a new project using tha the intro file, I get an error "the file is not a supported file or codex is not installed.  How can that be, I made the file using this program and he does'nt recognize files it creates?  Please advise... Thanks /.

  grethell

  What version of Premiere Elements you are using and on what computer operating system is running?

  You cannot import a project file (.prel) in another.

  For now, generalize choice

  a. export your Timeline (your intro) content to a file saved on the hard drive of the computer. And then import that

  file in new projects by using the new project add Media/files and folders. See publish + Share/computer/and the other

  choices here to generate this file intro for later use in other projects.

  b. you can set up what is called a dummy projects - this is a project with nothing other than the intro file. And, at all times

  you want to use the intro, you open one of these saved dummy projects and add your media sources.

  A lot of things to discuss. Please fill in some details more and then we can refine the answer for your particular situation.

  Thank you.

  RTA

• How to cancel the deployment of soa project using Ant instead of use em manually

  Hi guys:
  
  I wonder how to cancel the deployment of soa project using Ant?
  
  I know how to deploy cause it is Ant-sca - deploy.xml under the soa Server directory.
  
  Thanks and greetings
  Hilly

  Hi hilly
  When I looked at the file ant - sca - deploy.xml, I could see a defintion of task named undeployComposite. See if you can run this task something similar to using

  Ant Ant-sca - deploy.xml undeployComposite or something in that sense.

  
  
  
  
  

  Thank you
  Ravi Jegga

• Problem in creating project of blackberry using svn with eclipse

  I try to import BlackBerry code in Eclipse, svn. It is not verified as a project, so I'm the control using the new project wizard. Unfortunately, it doesn't give me an empty project. How can I get around this?

  • Microsoft Windos XP
  • Eclipse 3.4.1
  • JDE 4.7 component package
  • BlackBerry JDE Plugin 1.0.0.67

  If one found work around this please let me know.

  It's a little more difficult with the JDE Plugin 1.0, but you will need to manually extract the project to the folder, then use the new project wizard, and give the project the same name as the file recovered.

  This should make your project withdrawn a BlackBerry.

• Y at - it something to pass classes without causing conflicts to project?

  I am using OOP for a few months, but I was frustrated a handful of times trying to move classes. With other files, I just go in file display and click 'Move to disk', which has always worked very well.

  But if I try to move a folder that contains several classes or classes nested in subfolders, the FREAKS outside project. It of almost like LabVIEW moves the files one at a time, but not updated to other classes on new locations of methods, dependencies, etc. Then she moved something out of use and then all the classes that is supported on this monster file out, ask yourself where the file went.

  Then, about a thousand warnings pop up, and I can't reject them both. In addition, the resolution of conflicts does not work because LabVIEW confused on the point where the files loaded into memory are now located on disk.

  I had to source control returns to my workspace set to return to a State of operation. Then I usually move the classes on one at a time, which is a desperately slow and painful process.

  I'm doing something wrong here?

  I ran into similar questions before. Project files and library are just text. I moved things and edited the paths in the project/lvlib file. Can also use a backup as the library file. Your move is transformed into a copy and rename operation.

• TestStand / CVI in conflict: the project directory

  Hello

  I have TestStand 4.2, LabWindows/CVI 8.5, Windows XP.   I'm testing a DLL created in CVI, which uses the 'GetProjectDir()' to create a basis for work.

  When this DLL is exercised by a C program, it detects the directory of the project, C:\sandbox, which the program is run from.

  However, when I have exhausted the same project (C:\sandbox) TestStand directory it finds instead the project as directory is C:\Program NIUninstaller Instruments\TestStand 4.2\Bin\

  This is obviously not an acceptable way to build and work with files and temporary directories.

  This continues to happen even if I created and launched the file in sequence from the directory "correect" (C:\sandbox)

  How can I make testStand join BCI on what is the project directory?

  Thank you

  Hi rjohnson,.

  The reason that you are experiencing this issue, is that the GetProjectDir function gets the directory containing the executable file, so when we run the TestStand DLL, it captures where TestStand is performed.  You can use the GetModuleDir function:

  char path [MAX_PATHNAME_LEN];
  GetModuleDir (__CVIUserHInst, path);

  This should give you the desired path.

• Why LabVIEW example projects using Global Variables?

  I'm puzzled.  I've been pretty good programmers LabVIEW talks (including some who work for the OR) and came away with the impression that Global Variables should, as a general rule, be avoided, with functional Global Variables (alias VI Globals) generally preferred for "local memory".

  I have studied some of the example distributed with LabVIEW, 2012 and 2013, in particular the proposed acquisition in real time and am struck by the use of Global Variables, where I'd be inclined to use instead a FGV.  For examples, to stop all the loops on the RT target, the overall "All the RT loop Stop" is defined; 'Constants' of configuration (such as timeouts, Streme network names, the names of the journal folder) are kept as Globals; Streme network endpoints are stored in Globals.

  [Note - there is a weird spelling of the second word of the network Streme, above - when I tried to post with the correct spelling, I got an error message saying this word is 'not allowed in this community".]  I apologize for the offense, but I must confess that I do not understand what the problem with the help of the spelling of this word...]

  Why use Globals in these cases, rather than write a bunch of VIGs to hold these data?  Note that almost all these Globals are 'Read' essentially (written once when a resource is acquired, for example) or "Read Only" (treated as if they were a constant).  Indeed, read-only variables can be written as a Subvi with only an output terminal, acting as a (visible, due to the icon) constant.

  I can see advantages to this approach.  On the one hand, VIGs can have error bounds who run the data flow (I just spotted a bug "data flow" in code, I am developing that is based on this model, to read configuration data to an XML file in a world and in the same VI, Global wiring to a "use - me" terminal, but with no guarantee that I'll read the overall after I write it).

  It is, I suppose, a matter of 'speed' - perhaps Global Variables are 'faster' than VIGs (especially if the VIG 'sits' on an error line).  My thought, however, is that this difference is likely to be trivial, especially as these VIGs (or Globals) tend to become "occasional" calls (with the exception of the indicator 'all the loop Stop' which is called once per line).

  Are there other arguments or considerations that make a Variable global to a better choice than a VIG?  Is there a reason that LabVIEW developers put in these start-up of projects LabVIEW?

  BS

  I have to ask, how do you use functional Global Variables?  Like just a Get and Set?  If so, you can use a global variable.

  Yes, globals are faster and use much less overhead.  At the summits of CLA in recent years, we talked about using globals.  The most common use is for Write-Once-Read Many and writing-never-Read Many with configuration data.  It's a good idea to use globals with the constants that can change on you.  It turns out that the world will have the same performance as a constant in this case.  This is done so that you don't have 1 place to edit the 'constant '.

  The rule on "Globals are evil" actually goes back several years when NEITHER had the huge "people of the country are bad" vendata.  But NEITHER explains well how to do things properly.  So I found people, instead of using local variables, using the value property node.  It's even worse because the property causes thread swaps and kills your performance.  It wasn't until I shouted to people to use wires and shift registers I have seen improvements in the way in which people wrote their code.  So people are always riffling in the use of globals and decided to use FGVs with the EEG and fixed rather cases.  But this does not solve the problem of the conditions of race with critical data and you cause an additional burden.

  So from my experience, I use globals all the time for configuration data.  Yes, you must be careful about the race conditions.  But as long as you understand that it is a common and useful practice.

  I would not use a global variable for data that are constantly changing (use registers to offset or Action motor) and/or processes that have critical sections of code (use a motor of Action).

  NOTE: I use the definition of Mercer to FGV (a Get/Set only) and motor Action (many cases which specifically affect the data).

• Why the continuous measurement and Logging in LabVIEW 2012 Project uses strings instead of Enums and orders from the queue?

  Hello!

  I noticed that the continuous measurement and a project in LabVIEW 2012 Logging using chains instead of enums and orders from the queue. I wonder if there is a good reason for it?

  Kind regards

  Anguel

  First, string vs enum debate is probably the version of LabVIEW vim vs emacs. There are good arguments on both sides, and I doubt that there is always a "winner".

  A brief summary of our reasoning for the current state of the project examples:

  1. We used enums for the state machine because it is self-contained. A state machine will never tell himself to enter a State, he does not know. Knowing (as the programmer) all possible States with the help of an enum allows you to enlist the compiler in order to help us avoid mistakes to change the time (because you can't quite out an enum and LabVIEW can be said if you are not covering all cases to a structure of the case, etc..).

     Enums provide greater protection and rigidity by ensuring all withdrew at the time of publishing. This is often the 'default' recommendation that we do.

  2. We used strings for messages in queue manager because the producer of message and the message handler could be independent processes that are reused or traded. Channels avoid the need for the compiler to be able to connect the orders and push this responsibility to the programmer. This allows you to develop some sub-components independently as long as you agree to a series of channel commands that you can manage - you need not to share a file 'messages.ctl' or 'states.ctl '. It is conceivable a loop of message management a message it does not, how you can decide to either silently ignore it or will trigger an error (as we do in the model). The strings make it also easier if you want to swap the queues of LabVIEW outside by a TCP implementation for network vacilitate or intra-Processuse communication where the other end may or may not be written in LabVIEW.

     Channels to provide more flexibility (that is, you can add new commands to an existing via plugins system, you can pass parameters as part of the string, etc.) at the expense of pushing her potential errors at run time and to put more responsibility on the programmer.

  3. The actor's gifts frame a 3rd option - using classes such as messages. For me, it combines many of the advantages of these two enumerations (strictly typed, change errors) and strings (flexible and scalable), but with the disadvantage of being somewhat less transparent (you understand OO, be comfortable to navigate through a multitude of screws, legacy of understanding, etc.).

  I don't know there are other reasons, others to the breast OR had or seen as we validated models and examples of projects in-house, but here are my reasons. We know that we can not design for each situation there - our goal is to get useful models against new users to make them aware of what well thought LabVIEW programs are similar to experienced users know their applications better and I hope they do not hesitate to change what we provide or create their own designs, when they feel it's necessary. (On a side note, please share what you come up with - a community of experts sharing models would be really useful to us all LabVIEW users).

  Best regards

  Simon

• Open a project using BBWW2 gives an error of invalid project

  While trying to open an existing project in BB WW2 samples via Github, I got the error message 'invalid project', I did some research but github project seems inactive for last year.

  I noticed the different samples folder structure of one created by BB WW2 for a new project:

  New project structure:

  Directory of C:\Users\Student\WebWorks Projects\MyTime
  
  11/07/16  10:13 PM              .
  11/07/16  10:13 PM              ..
  11/08/16  09:21 AM              .cordova
  11/08/16  08:30 AM               497 config.xml
  11/07/16  10:13 PM              hooks
  11/07/16  10:13 PM              platforms
  11/07/16  10:13 PM              plugins
  11/07/16  10:13 PM              www
  

  GitHub sample project folder structure:

   Directory of C:\Users\Student\Desktop\BB10-WebWorks-Community-Samples-master\Toe-Tac-Tic
  
  12/18/15  03:07 AM              .
  12/18/15  03:07 AM              ..
  12/18/15  03:07 AM             1,846 config.xml
  12/18/15  03:07 AM              images
  12/18/15  03:07 AM             5,524 index.html
  12/18/15  03:07 AM            93,636 jquery-1.8.3.min.js
  12/18/15  03:07 AM            72,896 jquery.mobile-1.2.0.min.css
  12/18/15  03:07 AM           113,180 jquery.mobile-1.2.0.min.js
  12/18/15  03:07 AM             9,723 LICENSE
  12/18/15  03:07 AM               773 README.md
  

  Begins to follow this it works but I got the error webworks' is not recognized as an internal... is there a way to manually fix whitout reinstall the SDK?

  I was able to run the application in the emulator by performing the following steps:

  1. Create a new project through BB WW2.
  2. Replace the config file.
  3. Copy the html, js and other assets in www folder.

  Debug output of the emulator:

  stdout: [INFO]    Populating application source
  [INFO]    Parsing config.xml
  [WARN]    blackberry.app.orientation has been deprecated, please use blackberry.app instead
  [INFO]    Generating output files
  [INFO]    Package created: C:\Users\Student\WebWorks Projects\Toe-Tac-Tic\platforms\blackberry10\build\simulator\bb10app.bar
  [INFO]    Package created: C:\Users\Student\WebWorks Projects\Toe-Tac-Tic\platforms\blackberry10\build\device\bb10app.bar
  [INFO]    BAR packaging complete
  

  Debug and install the output:

  stdout: [INFO]    Target All-Touch- selected
  [INFO]    Populating application source
  [INFO]    Parsing config.xml
  [WARN]    blackberry.app.orientation has been deprecated, please use blackberry.app instead[INFO]    Generating output files
  [INFO]    Package created: C:\Users\Student\WebWorks Projects\Toe-Tac-Tic\platforms\blackberry10\build\simulator\bb10app.bar
  [INFO]    Package created: C:\Users\Student\WebWorks Projects\Toe-Tac-Tic\platforms\blackberry10\build\device\bb10app.bar
  [INFO]    BAR packaging complete
  [INFO]    Sending request: INSTALL_AND_LAUNCH
  [INFO]    Action: Install and Launch
  [INFO]    File size: 197824
  [INFO]    Installing toetactic.testDev_toetactic__e3f1f302...
  [INFO]    Processing 197824 bytes
  [INFO]    Progress 100%...
  [INFO]    Progress 100%...
  [INFO]    actual_dname::toetactic.testDev_toetactic__e3f1f302
  [INFO]    actual_id::testDev_toetactic__e3f1f302actual_version::1.0.0.0result::successLaunching toetactic.testDev_toetactic__e3f1f302...
  [INFO]    done
  

  I found this which mentions this topic more related information.