Confused about my SYS password

Similar Questions

• orapwd file out of sync now because I changed the sys password!

  I just got these two databases and online work (primary and backup) and want really not necessary to ask an outtage the customer...
  
  HP - UX 11.23
  Oracle 10.2.0.2
  
  For some reason, I couldn't get my Toad session connect with the credentials of sys, so I thought that I have blocked the account.
  I used a sqlplus session to change the sys password...
  As soon as I hit enter on the command commit, I knew that I messed up. I remember reading that the sys password must be identical.
  I found my notes on what I had the sys attributed to the last day before, and which would correspond to what it was supposed to be on the primary.
  I changed it back, but still the day before has lost the connection of pulse and throws failures in the primary alert log.
  
  Is anyway this sync everything up without having to take down the two databases and recreate the password file?
  
  My research have all returned nothing but how to create the file, it's self.
  
  Thank you.

  If you change the sys password then the pwd file should be updated with the new password. If you are concerned about the replacement of the file password standby with primary... Make a backup copy of the file on hold and then put spikes in place. It should work without problems.

• Confused about Directx 9 .0c

  I installed Mass Effect for PC yesterday on my Windows 7 PC.

  After the installation is complete, a popup opened asking me if I wanted to install Directx 9 .0c, as it was required for the game to run. I chose not to install it while I'm confused about Directx backward compatibility.

  First of all, is the Setup installation Mass Effect offers, the same as the Execution on the site of Microsoft Directx end user?

  Second, if the version of the installer from Mass Effect differs from Microsoft, I'm sure the Microsoft runtime more.

  But I do not understand what the runtime needs to reach - it allows me to play the old Directx 9 .0c and previous games on my Windows 7 PC, but still be capable of Directx 10 and Directx 11 games as well?

  One last thing - the Mass Effect system requirements say that my sound card must be compatible Directx 9 compatible .0c. How will I know that my sound card is compatible? I ran dxdiag but he didn't tell me whether or not my sound card is compatible.

  Thanks for your help!

  Hello bingiton.

  In short: install it.

  DirectX 9 is separated to DX10 and 11.  And some games require DX9 optional components that they want installed. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Confused about the notion of VLAN

  I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?
  MGMT is on vlan 4093
  DHCP is on VLAN 100 trunk e34 10.10.1.1
  Host 1 is on VLAN 200 trunk e34 10.10.2.1
  Host 2 is on VLAN 300 trunk e34 10.10.3.1
  active IP routing
  
  

• BlackBerry smartphones, I am new and confused about things 'connection '.

  I am a new BlackBerry - I have a Curve 8320, I am a small business owner, and I'm not connected to a BES. I use the BB Desktop Manager to synchronize with Outlook and to back up my BB and I did pretty well on most things, but I have still a few things that I leave me puzzled. In this forum, I will ask my "questions of confusion" about data options.

  I have a data plan "pay as you go" with AT & T, my provider, because there is practically no cell reception at home where I work. (I not use my BB for email since I was at my computer most of the time). I have a home network set in place and I have incorporated a router that supports wireless. I have connected a netbook to the wireless network and used to surf the Internet, so I know that my wireless connection works. I also managed to create a wireless connection on my BB to this network and on the home screen, it appears the name of my wireless network when I am here at home, so, I know that the device is connected to my network.

  BUT I don't think that I'm really using my home wireless network... I tried the other day browsing the Internet, and then AT & T told me that I hired data charges - I thought that I should not have if I wasn't using their network. Either I am wrong all assuming that they don't charge me if I use my network or I have something set up properly on my BB... someone can provide some guidance?

  Then, I don't really understand what BIS... I searched through the KB and couldn't find something that sets actually BIS... could someone please explain what BIS?

  Finally, can someone please explain the difference between "mobile network" and "wi - fi"? Apparently, if I disable "mobile network" I have no connection at all, including wi - fi. Is that the way things should be? But, I can turn off wi - fi and always get a connection (if I go out too far from my house, South possible and face).

  Thank you... and now I'm leaving the Forum of BB Desktop Manager to ask some questions here!

  Thanks to all who responded... I now have a much better understanding of the work of the whole thing "data". I disabled my LAN connection, which should avoid all charges. The part that confuses me the most, is that AT & T said would not have to pay to use my own wi - fi, but... it doesn't seem to be the case. So, McDonald's and Starbucks will work very well for me.

• start of 12 DB in the configuration of multithreading without knowing the sys password

  
  Hello

  I have a test of 12cR1 (12.1.0.2) oracle database in an AIX environment. I wanted to try the Unix 'multi-threading' on the machine architecture, so I did everything excpet creating the password file before you shut down the database where the init.ora file has been modified (by adding threaded_execution = TURE).

  NOW I'm stuck, because once you enable multi-threading OS authentication not working anymore.

  You must provide the password for SYS explicitly, the problem I know not the SYS password and now cannot start the database!

  any suggestion or help?

  The problem is solved by following the guide in the following link: http://www.dbi-services.com/index.php/blog/entry/multithreaded-12c-and-connect-as-sysdba

  Kind regards

• Confused about "additional control Points.

  Hello

  I'm confused about this sentence from database Concepts 11g Release 2 (11.2)

  Additional control points

  An additional control point is a type of thread control point in part intended to avoid writing a large number of blocks online redo log switches. DBWn checks at least every three seconds to determine if he has to do. When DBWn written stamps Sales, it advances the position of the control point, causing CKPT write the position of the control point to the file control, but not for data file headers.

  I thought that a checkpoint is written datafileheader and controlfile, this happens for example after a switch logfile - right?

  So, why not in the case of additional control point? For best performance?

  Additional control points to reduce the time to recover, as more data is committed to the files of data, right?

  Concerning
  Christian

  efa78257-b5f4-4db1-8222-007be18d15aa wrote:

  Hello

  I'm confused about this sentence from database Concepts 11g Release 2 (11.2)

  Additional control points

  An additional control point is a type of thread control point in part intended to avoid writing a large number of blocks online redo log switches. DBWn checks at least every three seconds to determine if he has to do. When DBWn writes buffers of Sales, it advances the position of the control point, causing CKPT write the position of the control point to the file control, but not for data file headers.

  I thought that a checkpoint is written datafileheader and controlfile, this happens for example after a switch logfile - right?

  So, why not in the case of additional control point? For best performance?

  Additional control points to reduce the time to recover, as more data is committed to the files of data, right?

  Concerning
  Christian

  There are many types of control points. One that will be updated on the headers of data files would be a complete control and would be applicable to the entire base. The additional control point is induced to keep on enhanching a counter that would ensure that only certain limited stamp Sales would be recovering. That's why a moment of the additional control point, data file headers are not being updated. Control file is probably updated with a "pointer to disk" which mentions the point up to which the dirty buffers are written in files (from the buffer cache) data and where to start the recovery, if necessary. Log file switch will cause a thread control point which, for one instance, would be considered a Global checkpoint only. The additional control point would be for various other reasons such as setting a value for the parameter Fast_Start_Mttr_Target etc.

  HTH

  Aman...

• Confusion about the size of the array in Oracle 11 g

  There is confusion about the size of a table. When exporting schema 'CRESTELWOMPRD601', the log file shows:

  _____________________________________________________________________________________

  . . exported "CRESTELWOMPRD601." "' TBLRSUBSCRIBERFIELDWORK ' lines of 12.62 GB 35568

  ____________________________________________________________________________________

  which may involve the size of the TBLRSUBSCRIBERFIELDWORK table is 12.62 GB.

  But when I find the size of the table using the query:

  SELECT nom_segment, BYTES / 1024 / 1024 "SIZE (MB)" FROM dba_segments where owner = 'CRESTELWOMPRD601' and nom_segment = 'TBLRSUBSCRIBERFIELDWORK. '

  He said that the size is only 9 MB for the TBLRSUBSCRIBERFIELDWORK table.

  I hope that my request is clear that there is no clarity on the size of the TBLRSUBSCRIBERFIELDWORK table.

  Please get back with the answer to my query

  
  

  Concerning

  Dba_segments indicates the space allocated to the segment while expdp indicates the size of the exported data, so if you had a table with a measure of 1 MB, but no data, dba_segments would 1 MB and expdp would report 0 bytes.

  John

• Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation

  Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation. I learned to know to install Oracle R12 apps, you have to install VM Box for Oracle Linux OS.
  I'll be very grateful, if someone can provide the documentation for installing the software. (Please complete documentation)

  Thank you and best regards,
  Isabelle

  Hello Vero,

  You can find information on documentation of the product for Oracle VM and Oracle VM templates on the following link:

  http://www.Oracle.com/technetwork/documentation/VM-096300.html

  You can find more information about Oracle VM on the following knowledge article, let me know if you have access to My Oracle support.

  Model of machine virtual of Oracle for Oracle Siebel CRM - Quick Start Guide (Doc ID 951872.1)

  Best regards

  Chetan

• I'm confused about my billing

  I have Adobe Creative cloud and I went to the student. I understand that the $12 plan / monthly is only for the first year, but when he jumped to $65 per month which was a pretty big leap (especially for someone who is still a student) and so I called Adobe customer service. I was told that I had changed my plan in October, something I never remember to do, but the representative I spoke with said she would get back on the plan of the student for $21 / month, and I will get a refund of $27,23. I realized that I was not getting a full refund because I was already at middle of January so I was fine with that too. The same day I receive a supplement of $21,23 and no refund. I remind them again and asked what was going on and said it was a policy of the company to charge the monthly fee for the new plans from the outset. I asked the officer if that's the case, why I do not get a full refund for the $65 I paid this month. She said it was because I was already in the month of January and this is what she was allowed to give me. I asked what month the charge $21.23 is for. She said it was for January. I told him that he didn't add up because according to its share of January has already been used and paid and cannot be refunded but I'm being charged for the total amount of January again under the student rate she changed her of me. I should get a full refund, as new charges $ 21.23 should cover the entire month or if I can not pay the full amount of $65 then I should get an amount proportional instead of a full $21.23 since according to its share of January is already paid and cannot be refunded. Even if I don't get a refund later, all I'm really going back to the day of $5,59 if you take into account the $21.23 I'm running at the front which is practically nothing in Exchange to go through this ordeal. I would have been better off I don't got no refund and just got charged for the month next February. She said she would take the case to his superiors to be studied by a higher office and gave me a case number. I am still confused about this because it just didn't seem like a good way to do business. I feel like I'm being charged twice for the days of service used. None of this makes no sense to me.

  Sorry, but only Adobe can help, not another user to and open forum

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Confusion about the requirements for the 2015 CC software

  I currently have Windows 8.0 (64 bit) which is so satisfactory and stable.  I have not upgraded to 8.1 Windows because I can't install same normal updates for Windows 8.0 without experiencing freezes system that only restore points can heal.  So for now, I would stick with what I have.  But the problem is the confusing requirements for various programs within the pile of creative cloud applications:

  Premiere Pro: Microsoft Windows 7 Service Pack 1 (64-bit) or Windows 8 (64-bit)
  Photoshop: Microsoft Windows 7 with Service Pack 1 or Windows 8.1

  Illustrator: Microsoft Windows 7 with Service Pack 1, Windows 8 or 8.1 Windows

  Dreamweaver: Microsoft Windows 7, Windows 8 or 8.1 Windows

  Hearing: Microsoft® Windows® 7 with Service Pack 1 (64-bit), Windows 8 (64-bit) or Windows 8.1 (64-bit)

  So what I'm confused about is the fact that Windows 8.0 is not listed for Photoshop, but Windows 7 and Windows 8.1 are.  Does this mean Photoshop CC 2015 is not compatible with Windows 8?  And that means that Premiere Pro is not compatible with Windows 8.1 since only 7.0 (SP1) and 8.0 are listed, I would have preferred the upgrade of software CC WITHOUT update Windows since I am picky on my installation of Windows 8 stable pipes now solid as a rock.  Fortunately, Illustrator, Dreamweaver, and hearing are compatible with all three, it seems.

  Can someone clear up the confusion, please?

  I think that my hardware is OK for this.

  Motherboard: Asus Crosshair Formula V-Z (AMD 990FX)

  CPU: AMD FX-6300 Vichera 3.5 GHz

  Memory: 16GB Kingston HyperX DDR3 2133 MHz

  Video: MSI N650-MD1GD5/OC GeForce 650MX

  Monitor: Acer S271HL of 27 "(1920 x 1080)"

  Power supply: Seasonic X-Series 1050W (SS-1050XM Active PFC F3)

  HDD1: Western Digital 320 GB (System)

  HDD2: Seagate SV35 Series (ST1000VX000 1 TB 7200 RPM 64 GB OEM)

  VidCap: Blackmagic intensity Pro HDMI

  USB hub: Rosewill RDCR-11005 5.25 "

  UPS: APC Back-UPS XS 1500

  Router: Netgear WNDR3700 N600

  System is NOT overclocked

  It is compatible but not tested.

• Confused about trandata

  Hi all

  11.2.0.1

  I'm confused about additional logging.

  I have golden gate replication, but in primary db.

  Is this related to archive the recording? It works even if I'm not on the archive log?

  Installing Oracle: orcl

  Enable supplemental logging (required on primary database only)

  SQL > alter database adds additional log data;

  
  

  
  

  Hello

  One of the main reasons to enable additional logging is to generate logs for the update statement. As insert and remove implies the change to an entire line (addition or deletion of a complete line) and all the columns it while updating can occur on a column of a row.

  Additional logging on the side of database source to some of the columns are very well required to ensure that these changes to the columns that are supplemental logging enabled will be applied with success in the target database. With the help of these additional columns, oracle decides the lines that need to be updated on the destination side. This is so the extra logging is more imperative for replication.

  SUPPLEMENTAL LOGGING & laquo; ON CALL DBA SUPPORT

  Blog de Ajwat on Oracle: extra for Golden Gate

  Thank you

• Confusion about DBCA script generated for the manual creation of CARS DB

  Version:11.2.0.4/RHEL 6.3

  We create our 3-node RAC database manually.  DBCA can satisfy our needs because our redo log files, data, control and tempfiles files files are placed in a complicated way. If we use DBCA, we spend a lot of time configuration to our requirements after the creation of the DB.

  I generated scripts for creating DB of DBCA (name of the BD = BRCFPRD)

  DBCA placed the creation of db scripts in the directory specified in all 3 nodes!

  They all have nearly the same content. The only difference being the name of the instance (BRCFPRD12.sql for Node2,... etc.).

  Scripts in each node have the createDB.sql statement that has CREATE DATABASE 'BRCFPRD' statement. Why is it? The database should only be created from a node. Then why DBCA place createDB.sql in all nodes?

  I want to just run the script of a single node, say Node1 and it should create the RAC 3-node DB. How can I do this manually?

  -The scripts of DBCA in Node1 genereated

  Apex. SQL

  BRCFPRD1.sh

  BRCFPRD1. SQL

  Context.SQL

  CreateClustDBViews.sql

  CreateDB.sql

  CreateDBCatalog.sql

  CreateDBFiles.sql

  cwmlite. SQL

  emRepository.sql

  init.ora

  interMedia.sql

  JServer.sql

  lockAccount.sql

  ordinst. SQL

  OWB. SQL

  postDBCreation.sql

  space. SQL

  xdb_protocol. SQL

  -The content of the main tank of script BRCFPRD1.sh

  $ cat BRCFPRD1.sh

  #! / bin/sh

  OLD_UMASK = 'umask '.

  umask of 0027

  mkdir Pei/optware/product/admin/BRCFPRD/adump

  mkdir Pei/optware/product/admin/BRCFPRD/dpdump

  Pei/optware/product/admin/BRCFPRD/hdump mkdir

  Pei/optware/product/admin/BRCFPRD/pfile mkdir

  mkdir/optware/product/cfgtoollogs/dbca/BRCFPRD Pei

  umask ${OLD_UMASK}

  ORACLE_SID = BRCFPRD1; export ORACLE_SID

  PATH = $ORACLE_HOME/bin: $PATH; export PATH

  You must add this entry in the/etc/oratab echo: BRCFPRD:/optware/product/oracle/11.2.0:Y

  /Optware/product/Oracle/11.2.0/bin/sqlplus/NoLog @/optware/produit/BRCFPRD1.sql

  -Content of BRCFSPRD1.sql

  $ cat BRCFPRD1.sql

  set verify off

  ACCEPT sysPassword CHAR PROMPT ' enter new SYS password: ' HIDE

  ACCEPT systemPassword CHAR PROMPT ' enter new password SYSTEM: ' HIDE

  ACCEPT sysmanPassword CHAR PROMPT ' new password for SYSMAN: ' HIDE

  ACCEPT dbsnmpPassword CHAR PROMPT ' new password of DBSNMP: ' HIDE

  /optware/product/Oracle/11.2.0/bin/orapwd file=/optware/product/oracle/11.2.0/dbs/orapwBRCFPRD1 force host = y

  Home /grid/product/11.2.0/bin/setasmgidwrap o=/optware/product/oracle/11.2.0/bin/oracle

  host /optware/product/oracle/11.2.0/bin/srvctl add database d BRCFPRD o /optware/product/oracle/11.2.0 Pei +DATA/BRCFPRD/spfileBRCFPRD.ora - n BRCFPRD - a 'DATA, ARCH_DG.

  host /optware/product/oracle/11.2.0/bin/srvctl add instance d BRCFPRD-i BRCFPRD1 - n cimprd175

  host /optware/product/oracle/11.2.0/bin/srvctl add instance d BRCFPRD-i BRCFPRD3 - n cimprd177

  host /optware/product/oracle/11.2.0/bin/srvctl add instance d BRCFPRD-i BRCFPRD2 - n cimprd176

  host /optware/product/oracle/11.2.0/bin/srvctl disable the d BRCFPRD database

  @/optware/produit/CreateDB.sql

  @/optware/product/CreateDBFiles.sql

  @/optware/product/CreateDBCatalog.sql

  @/optware/product/JServer.sql

  @/optware/product/context.sql

  @/optware/product/xdb_protocol.sql

  @/optware/product/ordinst.sql

  @/optware/product/interMedia.sql

  @/optware/product/cwmlite.sql

  @/optware/product/spatial.sql

  @/optware/product/emRepository.sql

  @/optware/product/apex.sql

  @/optware/product/owb.sql

  @/optware/product/CreateClustDBViews.sql

  echo of the host ' SPFILE='+DATA/BRCFPRD/spfileBRCFPRD.ora' "> /optware/product/oracle/11.2.0/dbs/initBRCFPRD1.ora

  @/optware/product/lockAccount.sql

  @/optware/product/postDBCreation.sql

  -Content of CreateDB.sql in Node1

  $ cat/optware/produit/CreateDB.sql

  SET VERIFY OFF

  Connect "SYS" / "' & & sysPassword ' as SYSDBA"

  set echo on

  coil /optware/product/CreateDB.log append

  startup nomount pfile="/optware/product/init.ora";

  CREATE DATABASE 'BRCFPRD '.

  MAXINSTANCES 32

  MAXLOGHISTORY 1

  MAXLOGFILES 192

  MAXLOGMEMBERS 3

  MAXDATAFILES 3000

  DATAFILE SIZE 700M AUTOEXTEND ON NEXT MAXSIZE 10240K UNLIMITED

  LOCAL MANAGEMENT MEASURE

  SYSAUX DATAFILE SIZE 600M AUTOEXTEND ON NEXT MAXSIZE 10240K UNLIMITED

  PETIT_FICHIER DEFAULT TABLESPACE TEMP TEMPFILE-TEMPORARY SIZE 20M AUTOEXTEND ON NEXT MAXSIZE 640K UNLIMITED

  PETIT_FICHIER UNDO TABLESPACE "UNDOTBS1" DATA FILE SIZE 200M AUTOEXTEND ON NEXT MAXSIZE 5120K UNLIMITED

  CHARACTER SET AL32UTF8

  NATIONAL CHARACTER SET AL16UTF16

  SIZE OF THE LOG FILE GROUP 1 28672M,

  GROUP 2 SIZE M 28672

  The USER SYS IDENTIFIED BY ' & & sysPassword ' SYSTEM of the NAMED USER BY ' & & systemPassword ';

  set linesize 2048;

  column ctl_files by ctl_files new_value;

  Select concat ('control_files = "', concat (replace (value, ','"', "'),"')) ctl_files of the parameter $ v where name = 'control_files;

  the echo host & ctl_files > > / optware/product/init.ora;

  spool off

  If you look at the scripts generated in Node2 and Node3, you can see all scripts except the specific instance those are discussed using REM.

  /U01/product/Oracle/11.2.0.3/dbhome_1/bin/srvctl host REM add instance d STOMPER-i STOMPER1 - n ugxtlprd186

  /U01/product/Oracle/11.2.0.3/dbhome_1/bin/srvctl host REM add instance d STOMPER-i STOMPER2 - n ugxtlprd187

  /U01/product/Oracle/11.2.0.3/dbhome_1/bin/srvctl host REM disable database d STOMPER

  REM @/u01/product/CreateDB.sql

  REM @/u01/product/CreateDBFiles.sql

  REM @/u01/product/CreateDBCatalog.sql

  REM @/u01/product/JServer.sql

  REM @/u01/product/context.sql

• SYS password does not not in Dbcontrol?

  DB: 11 R2

  The SYS password does not work in the DBcontrol.

  I've recreated the repository.

  I've reconfigured the Db control.

  the password works by connecting to DB by sqlplus.

  Any ideas what I need to do?

  Concerning

  ROEs

  Re-create the PWD file

  References: Metalink Note: 358201.1

• Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for RAW files. I have 8.7 DNG, but I was wondering if LR and PS will import direct soon thanks for all the tips

  Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for RAW files. I have 8.7 DNG, but I was wondering if LR and PS will import direct soon thanks for all the tips

  Support for the Nikon D750 was introduced in the last version of LR 5.7 and ACR 8.7 Novemder 18 2014.

  New updates for LR 4 were arrested when LR 5 was released on June 9, 2013. No other updates of bug fixes and new camera support.

  Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced on the market in September 2014 some 15 months after further development of LR 4 was arrested.

  You can use the Adobe DNG (free download for packing) program to convert your Nikon D750 Nef (raw) files in Adobe's DNG format which will allow you to import those into LR 4. This is the crutch provided by Adobe to allow the processing of raw files with versions out-of-date LR and ACR.

  You can also update the ACR for PS CS6 version 8.7 plugin that can also work with the raw files of the D750. For direct support in Lightroom, you will need to upgrade (paying) to version 5.7.