Confused about the sequence settings

Similar Questions

• Transcode all sequences of editing in Premiere Pro for DNX175X? The sequence settings?

  About 30% of my digital SLR 8 bits and AVCHD .h264 turned needs significant noise reduction. So I use Neat Video4 in After Effects to reduce noise and can export images with large bands on issues DNX175X 10 bits to help avoid gangs. Also, for sequences requiring a minor noise reduction I'm considering export as DNX36 8-bit in order to avoid the huge file sizes. Is there a reason that I shouldn't do this? Should I export all as DNX175X?

  Also, I wonder should I transcode all my images on my first pro at DNX editing or is it better to let the images not requiring reduction of noise in its original format? Also, once put in the own DNX images are the parameters of my project sequence? He would remain AVCHD 1080 p or should it be changed by DNX175X?

  Thank you

  Sheree

  Hard drives are fairly cheap.  I generally recommend getting more than better to worry about running out.

  Export all as DXxHD 175 x.  Yes.  (In fact, I convert everything even before editing, as the handles so much better than H.264 DNx.)

  The sequence settings are pretty irrelevant, as long as you have resolution rates and necessary framework.

• Is there any predefined preset file which could be 'fit the sequence settings "?

  Hi guys,.

  When you export by "match sequence settings" selected, first export clip with the current sequence settings.

  If I use the controller to export to export a clip, is there any predefined predefined file that could represent these "match sequence settings"? Or there is a setting that can be serialized in preset file to "adapt the sequence settings"?

  Hi Alex,

  Match sequence settings is probably not exactly what you're looking for, because who uses only the Preview predefined sequence which will usually be an I-Frame MPEG codec.

  In first Pro CC, it has a new option to Match Source for some formats.  Source soccer match is not available for all formats - for example, with AVI or MOV, it is not available, but with H.264 you can use a "Preset" similar to the one here:

  C:\Program Files\Adobe\Adobe Media Encoder CC\MediaIO\systempresets\4E49434B_48323634\01 - Match Source - high bitrate.epr

  For formats which is not supported for game Source, you can use the Suite of sequence information for information on the sequence, as shown in the example of export controller:

  sSequenceInfoSuitePtr-> GetFrameRect()

  sSequenceInfoSuitePtr-> GetPixelAspectRatio()

  sSequenceInfoSuitePtr-> GetFrameRate()

  etc, etc.

  Then, use what you have discovered about the sequence to choose the path preset with your own code.

  Zac

  Post edited by: Zac Lam

• Confused about the notion of VLAN

  I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?
  MGMT is on vlan 4093
  DHCP is on VLAN 100 trunk e34 10.10.1.1
  Host 1 is on VLAN 200 trunk e34 10.10.2.1
  Host 2 is on VLAN 300 trunk e34 10.10.3.1
  active IP routing
  
  

• Confusion about the size of the array in Oracle 11 g

  There is confusion about the size of a table. When exporting schema 'CRESTELWOMPRD601', the log file shows:

  _____________________________________________________________________________________

  . . exported "CRESTELWOMPRD601." "' TBLRSUBSCRIBERFIELDWORK ' lines of 12.62 GB 35568

  ____________________________________________________________________________________

  which may involve the size of the TBLRSUBSCRIBERFIELDWORK table is 12.62 GB.

  But when I find the size of the table using the query:

  SELECT nom_segment, BYTES / 1024 / 1024 "SIZE (MB)" FROM dba_segments where owner = 'CRESTELWOMPRD601' and nom_segment = 'TBLRSUBSCRIBERFIELDWORK. '

  He said that the size is only 9 MB for the TBLRSUBSCRIBERFIELDWORK table.

  I hope that my request is clear that there is no clarity on the size of the TBLRSUBSCRIBERFIELDWORK table.

  Please get back with the answer to my query

  
  

  Concerning

  Dba_segments indicates the space allocated to the segment while expdp indicates the size of the exported data, so if you had a table with a measure of 1 MB, but no data, dba_segments would 1 MB and expdp would report 0 bytes.

  John

• Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation

  Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation. I learned to know to install Oracle R12 apps, you have to install VM Box for Oracle Linux OS.
  I'll be very grateful, if someone can provide the documentation for installing the software. (Please complete documentation)

  Thank you and best regards,
  Isabelle

  Hello Vero,

  You can find information on documentation of the product for Oracle VM and Oracle VM templates on the following link:

  http://www.Oracle.com/technetwork/documentation/VM-096300.html

  You can find more information about Oracle VM on the following knowledge article, let me know if you have access to My Oracle support.

  Model of machine virtual of Oracle for Oracle Siebel CRM - Quick Start Guide (Doc ID 951872.1)

  Best regards

  Chetan

• Blackmagic Decklink codecs appearing is not on the sequence settings

  I am one of many failovers of the FCC who is getting used to the use of Premiere Pro.

  I use a Mac Pro with Blackmagic Decklink Extreme. When I start a new project, Blackmagic codecs do not appear in the sequence settings but first saw the release of Blackmagic Audio when I check in the preferences. I downloaded the latest Blackmagic drivers and install them, but I still don't see the codecs for surveillance.

  Anyone in the same boat or has any ideas?

  Thank you

  How Decklink driver version are you using?

  I currently use 8.0 and blackmagic presets is displayed correctly.

  In 'New sequence'--> parameters--> edition mode checks to see if there is an option "Blackmagic uncompressed.

  If this isn't the case, decklink plugins for first are not installed correctly.

  Do not forget that decklink drivers MUST be installed after the installation of CS5.5.

  Hope to be useful.

  Alessandro

• Confused about the extension of the Sprite class

  Howdy-

  I learn programming with object oriented ActionScript and am confused about the class Sprite and OO in general.

  My understanding is that the Sprite class allows you to group a set of objects that you can manipulate all the objects at the same time.

  I explored the Open Flash Chart code and note that the main class extends the Sprite class:

  Base/public class extends Sprite {}

  What this lets you do?

  Also, on a related note, how to draw, say, a line once I extended?

  Without extend Sprite I could write:

  var graphContainer:Sprite = new Sprite();

  var newLine:Graphics = graphContainer.graphics;

  ...

  And it works very well. Once I have extend the Sprite class, I'm lost. How can I modify this code so that it still draws a line? I tried:

  var newLine:Graphics = this.graphics;

  My understanding is that since I extend the Sprite class, I should still be able to call its method chart (or property? I have no idea). But, he screams at me, saying "1046: Type was not found or is not a constant of compilation: graphs.»

  A number of things.

  First of all, I would not use this approach in your table constructor. Setting the width and height only makes sense if you adjust the width and height of the existing content, and the table (Sprite) does not at this time here. If you want to give the table a 'size', you could do it like this:

  public function Chart (width: Number, height: Number) {}
  This.Width = width;
  This.Height = height;
  put in a background invisible to this size:
  this.graphics.beginFill (0,0);
  this.graphics.drawRect (0,0,width,height);
  }

  There are other ways, including putting in a form or a Sprite of child as a child for the background so that clear will not erase the background of the chart. This way you could have properties for the background in your table class and update the background as a child DisplayObject instance... a few ideas to think to...

  Then, after that, your chart should be functional...

  Then back in your scenario, you could do this:

  import graphics. Table;

  Stop()

  var myNewChart:Chart = new Chart (300,200)
  myNewChart.render ();
  addChild (myNewChart)

• Confused about the capacity of the HARD drive on my new Equium L350

  I'm rather confused (normal state) about the capacity of my hard disk. This is supposed to be 120 GB but... On 'My computer', it shows that I have 23 GB of 55.7 left GB on Vista C and 49.8 54.5 on E of data that is delivered to about 110 GB.

  I'm already about 10 GB missing but maybe that is taken up with hidden files. More worrying is that I have so little space on Vista C. Can I save files on the data partition, or is that a no-no? So far, everything I've loaded on it goes into Vista C.
  Any help would be appreciated.
  Thank you

  I agree with InvaderZim.

  But there should also be another reason why the two partitions of HARD drive are smaller than the whole HARD disk.

  I assume you are using the Vista operating system.
  Vista uses hidden for some files from recovery partition.
  If you check the Disk Manager, and you should see all available on your HARD disk partitions.

  See you soon

• Confusion about the requirements for the 2015 CC software

  I currently have Windows 8.0 (64 bit) which is so satisfactory and stable.  I have not upgraded to 8.1 Windows because I can't install same normal updates for Windows 8.0 without experiencing freezes system that only restore points can heal.  So for now, I would stick with what I have.  But the problem is the confusing requirements for various programs within the pile of creative cloud applications:

  Premiere Pro: Microsoft Windows 7 Service Pack 1 (64-bit) or Windows 8 (64-bit)
  Photoshop: Microsoft Windows 7 with Service Pack 1 or Windows 8.1

  Illustrator: Microsoft Windows 7 with Service Pack 1, Windows 8 or 8.1 Windows

  Dreamweaver: Microsoft Windows 7, Windows 8 or 8.1 Windows

  Hearing: Microsoft® Windows® 7 with Service Pack 1 (64-bit), Windows 8 (64-bit) or Windows 8.1 (64-bit)

  So what I'm confused about is the fact that Windows 8.0 is not listed for Photoshop, but Windows 7 and Windows 8.1 are.  Does this mean Photoshop CC 2015 is not compatible with Windows 8?  And that means that Premiere Pro is not compatible with Windows 8.1 since only 7.0 (SP1) and 8.0 are listed, I would have preferred the upgrade of software CC WITHOUT update Windows since I am picky on my installation of Windows 8 stable pipes now solid as a rock.  Fortunately, Illustrator, Dreamweaver, and hearing are compatible with all three, it seems.

  Can someone clear up the confusion, please?

  I think that my hardware is OK for this.

  Motherboard: Asus Crosshair Formula V-Z (AMD 990FX)

  CPU: AMD FX-6300 Vichera 3.5 GHz

  Memory: 16GB Kingston HyperX DDR3 2133 MHz

  Video: MSI N650-MD1GD5/OC GeForce 650MX

  Monitor: Acer S271HL of 27 "(1920 x 1080)"

  Power supply: Seasonic X-Series 1050W (SS-1050XM Active PFC F3)

  HDD1: Western Digital 320 GB (System)

  HDD2: Seagate SV35 Series (ST1000VX000 1 TB 7200 RPM 64 GB OEM)

  VidCap: Blackmagic intensity Pro HDMI

  USB hub: Rosewill RDCR-11005 5.25 "

  UPS: APC Back-UPS XS 1500

  Router: Netgear WNDR3700 N600

  System is NOT overclocked

  It is compatible but not tested.

• QuickTime not an option on a video clip of the sequence settings

  In the sequence, under video preview settings, "Quicktime" is not listed as a preview File Format.

  8.1 running 64-bit Windows

  I installed the latest Quicktime, uninstalled, reinstalled, repaired, nothing helps.

  Also, I did the same thing with Premiere Pro, uninstall and reinstall.

  Here is a screenshot of the drop-down menu that doesn't have the Quicktime option.

  

  I'm running out of ideas for how to get it to appear, so I came here :/

  Thanks in advance!

  I would use MPEG I-Frame only as a preview format, but even this is not!

  This seems strange to me.  Try this:

  FAQ: Why some codecs and sequence presets missing my Premiere Pro installation?

• Confused about the new creative cloud

  Hi all

  Since I read adout the new creative cloud I'm confused about what will happen to my license for Adobe Lightroom. Will they remain still desktop apps as well or I have to pay for an annual license, if I want to use new versions of Lightroom?

  I am a casual photographer and I like to use Lighroom for my photos, but I don't think that pay for an annual license because I'm not spending a lot of time, image-editing.

  Can someone clarify this for me?

  Thank you very much

  Lucian

  5 Lightroom does not have subscription only, you're fine. There is no sign that it will even happen in the foreseeable future either.  It's just the ex-Creative-Suite that all talk.

  Target market of Lightroom is different from the Creative Suite/Cloud. CC is a good deal for the majority of its base of users (next door), while the majority signed without major complaints.  Lightroom has a huge customer base amateur, and they would be much more difficult to convince us to go subscription only. They would be likely to lose most of customers of Lightroom at the moment, and they are not completely stupid.

• Confusion about the use of the formula interpreter

  How can I rate a 4-bit input and output an integer value I need to map to a different value? I am to evaluate the following entries (4, 1 output):

  (((IN (0) AND IN (1)) AND (IN (2) AND IN (3)) = 13) <= we="" know="" that=""> 1111 b is 15decimal, but I need to translate the value 13 , so that it represents the index of a spreadsheet I'll be selecting with the sequencer.)

  I'm GOLD ' ing every possible combination of the 4 inputs and each combination should generate a value of 'special' I need to get out to represent the index that I need.

  The result of a comparison or logical operation (OR, AND, =, <> , etc.) is 0 (False, zero) or 1 (True, we).

  Change the formula for

  (IN (1), IN (0) AND IN (3) AND IN (2)) * 13

  In my limited testing, any value not zero entries will test to TRUE, if one is zero, then the output is zero, otherwise, the output is 13.

• Confusion about the Source of excitement in the bridge SMU-4331 input module

  Hello

  I had some confusion through the input of the bridge SMU-4331 sheet module.

  In the features section of excitement, its current Minimum as 29mA says. What it means. It can only current greater than 29mA delivery!

  

  I think this should me Maximum current specification.

  If you look at the table below

  

  350 ohm resistance, the current should be 10V/350 ohm = 28.5mA

  but for 1 K ohm, current will me 10V/1Kohm = 10mA, which isn't normal, if you specify current minimum as 29mA.

  any thoughts?

  Kind regards

  Mirash

  Hello Mirash,

  I'm glad I could help!

  As for your other question, the SMU-4330/4331 are inherently peripheral ratiometric.  This means that they are designed to detect the level of excitement and range of the ADC to the appropriate scale.  In this way, we can compensate for permanent changes in the voltage.  One of our engineers wrote a big article really nice area on the subject I would recommend that you take a look at: Sensors of Measuring Bridge-Based with the ratiometric approach

  See you soon,.

• want to install trial - confused about the ip pool/ip addresses

  So I downloaded the FVO and attempted to deploy devices (latest version of 5.7.x). When I tried everything first he said I need an IP pool. OK, so I guess that... Well I don't know why I need a pool of ip, but I created an and associated with the correct vsphere portgroup/network. Now, I need to choose the IP address - he invites in trust manual/fixed or dhcp - of course, I want to give fixed ip servers, but then it says "ip address cannot be in ip pool.

  huh?

  I don't understand - what is the purpose of the ip pool, otherwise to assign ip addresses to the devices?

  no problem, thanks for the reply.

  I have re-read the start guide however, and this time it was spotted in the network settings section configures where he describes the creation of the pool:

  "Do not select the checkbox enable the Pool IP and do not specify a range of IP addresses. You specify it

  IP address for the virtual machines in the TIME using the Deployment Wizard OVF VAPP. »

  Weird - and it worked. Not sure why we need a swimming pool in the first place, then. HMMPH