Confusion between the issue of fonts for a new user

Similar Questions

• How can change the bookmarks system wide for each new user?

  I wish that every new user who creates a count in a Debian linux system to achieve a specific set of bookmarks. I can't find where to put my custom bookmarks.html file to do this.

  Create a folder/defaults/profile in the Firefox installation folder and place a bookmarks.html file in this folder.
  
  This is the same folder of models for the new profiles that used in previous versions of Firefox, but all files that were there, then are now in archive omni.jar and the profiles folder in are no longer present.

• I need the century Gothic fonts for my windows XP

  Does anyone have the files of fonts for Windows XP "century gothic"?

  I need to reinstall my computer for a specific program work. (treated receipts)

  It is not a font of Windows XP by default, you will need to get it from another source or program.  See here for the default fonts in Windows XP:

  Fonts that come with Windows XP

  The police is included with other products from Microsoft that you already have, see here: http://www.microsoft.com/typography/fonts/font.aspx?FMID=643

  John

• The issue is available for download, but requires a newer version of the application. What should I do

  I created a multi folio app for android. I published the first issue and ecerything was fine... I just started my second question and as it appears on my app when I try to download it I got a message that says. The issue is available for download, but requires a newer version of the application. Update your application.

  What should I do... i did nothing for my app... How should I update? The are no newer version from the store... Can someone help me?

  You have two choices:

  (1) make a new version of your app in the App Builder is the latest version of DPS

  (2) redo your folio in the new dialog box, and folio, select a version of Viewer target that matches or is earlier than the version of your app in the store.

  Neil

• If someone UN-install/reinstall the XP operating system for a new beginning and not use any old files more than cure someone of a problem of malware/malicious?

  If someone UN-install/reinstall the XP operating system for a new beginning and not use any old files more than cure someone of a problem of malware/malicious

  Reformat the disk and reinstall Windows XP would heal any problem of malicious program with the exception of an infected MBR (Master Boot Record) on the disk.   The F-Secure rescue CD is a tool that allows to remove a MBR infection.

• Captivate 9 - trying to switch between the States of an object when a user clicks on this object?

  Try to switch between the States of an object when a user clicks on this object? I have successfully used the function of the State of the object to change the object to a different State, but I need it back to its Normal state when it is selected again in the State has changed and then continue to turn every State when you click on it. It is an interaction of flashcard. I can do this using several objects and hide/show, but I would do it with States and unique objects.

  You're talking about custom or InBuilt States. What kind of action do you use: a simple or advanced/shared action?  If you simply switch between two States, use the approach I described in this blog post:

  1 share = 5 buttons toggle - Captivate blog

  You will probably need a user variable to track the status, but you can use the shared conditional action described in this blog.

• Hello out there! I am trying to understand the relationship between the products. I am a current user of 13 items and sought to CC Photoshop with Lightroom. Always use elements like the storage tool to catalog my photos or it get replaced?

  Hello out there! I am trying to understand the relationship between the products. I am a current user of 13 items and sought to CC Photoshop with Lightroom. Always use elements like the storage tool to catalog my photos or it get replaced?

  It's kind of ridiculous. All I want to do is ask a question and there is no place to connect with anyone. Sucks!

  Hi charlesf,

  If you choose to go to CC Photoshop with Lightroom, Photoshop Elements would not be replaced.

  CC of Photoshop and Photoshop Elements are different programs, so the two will remain separate on your machine and catalogue items would not hit at all.

  Let us know if you have any other questions.

  Kind regards

  Claes

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• Confusion between the Satellite A200-13O and A100-784

  Hello...

  Please can you help me decide which laptop I will buy.

  The concern here is the difference in performance between the "GMA 950 up to 256' in the A200 and the" 128 "in up to the A100.". "

  Is there a significant difference in performance (all game), or it's like the same.
  Because if there is little or no difference in performance, I'll go for the cheaper A100.

  Thank you.

  Hey Buddy,

  There is no huge difference, so if you take the A100 you get quite the same performance as on A200.

  I have an A100 with XP and it works well for me. For example: prey runs very nice and the machine does its job.

  Hope I could tell you because your question to which machine is best for you.

  Welcome them

• E/s and the issue of Communication for the sbRIO-9601

  Hello

  Our company is looking to use the sbRIO-9601 in an OEM application and I had two technical questions on the Board of Directors.

  (1) are the functions VISA support?  I saw there an RS232 port, I want to just make sure I can read/write easily out of it using prebuilt VI rather than do all the level low and starting from scratch.

  (2) we will be reading and writing of simple commands to a device coupled via the RS232 interface and based on the response, illuminating an LED controlled by the Board of Directors.  I have not selected any led and hoped that neither could provide some clarification on the limits of the power provided in the sbRIO-9601 user guide.  We will use the 3.3V output... I should put a resistor in line current limiting or I can put the diode directly between the output pin and the digital ground?  Us can drive more than 15 LEDs, however, we will never more than 3 see on at any given time.  I saw in the 3.3V section i/o of the documentation that the current max tested per channel is 3mA... but bus total is 330mA.  Is there a limit to how much we can provide each channel as long as we remain under the 330mA all together?

  Thank you

  Hi leachdor,

  (1) VISA functions are supported for the RS232 port on the sbRIO, so do not do any level low programming for them.

  (2) the maximum that we specify channel 3 is my.  You can combine several channels in parallel to increase this output up to 330 mA for the total bus.  Since you're only driving 15 LEDs and there are 110 channels of output, you should be able to combine some led.

• Confusion about the development of applications for windows surface surface Pro and Windows for windows rt...

  Hello guys... I want to launch an application... for surface... but the confusion I got... is one of main surface contain windows rt and pro version contain windows 8. for pro, I'm fine with the update, but for windows version rt... made the project 2012 VS for windows... like in the pro version... (same project will work or not)... or I do VS 2012 project for windows phone...

  Hello

  Please post your question in the MSDN forum.

  MSDN

  http://social.msdn.Microsoft.com/forums/en-us/home

  I hope this helps.

• Change the size and font for any field type?

  Because that copy / paste to the font size and type with it I want to create a script which change

  I tried get to the function 'exit' of the material as follows:

  Form1. TestPage.Subform1.TextField1.font.size = '10pt '.

  Form1. TestPage.Subform1.TextField1.font.typeface = "Myriad Pro";

  I also tried a search field button changes to a script I found online, but it does not work for me:

  function ProcessTextEdit (oField)

  {

  }

  function ProcessAllFields (oNode)

  {

  If (oNode.className is "subform")

  {

  Search fields in the child.

  for (var i = 0; i < oNode.nodes.length; i ++)

  {

  var oChildNode = oNode.nodes.item (i);

  ProcessAllFields (oChildNode);

  }

  }

  Else if (oNode.className == "field")

  {

  Switch (oNode.ui.oneOfChild.className)

  {

  case "textEdit":

  If (oNode.parent.className is "Subform")

  {

  Form1. TestPage.Subform1.TextField1.font.size = '10pt '.

  Form1. TestPage.Subform1.TextField1.font.typeface = "Myriad Pro";

  }

  }

  }

  }

  No luck. Any suggestions?

  I tried the only control font size and type everything by allowing users to retain the flexibility to use color, bold, underline, etc. to highlight certain information when he text above. Plain text allows it. So far, everything I've read, is not possible because Livecycle is not able to control the attribute of Rich Text of the word imported into a Rich text box in Livecycle.

• Install the Myriad Pro Font for web to the Local Server

  Dear customer,

  We have customers that use Myriad Pro Font for their website.

  Currently bind us the police using TypeKit.

  They ask us for the installation of the police in their local Server (not use TypeKit more).

  Do you have any suggestions what kind of package and the license we should buy for this?

  Kind regards

  There

  Hi Yunardo. Sorry, Myriad Pro is only available for web use via Typekit. Self-hosting, is not allowed.

  Kind regards

  Christopher

• Confusion between the physical schema definition MSSQL Server

  Hello
  
  I'm learning ODI 11 g and I am currently working under the physical definition of the schema under topology Navigator. I want to import data from MS SQL Oracle Server; I have defined the source (MSSQL Server) and target servers (Oracle). Testicles of connections and that they are working correctly.
  
  When you set the physical schema for MS SQL server I am confused with the following fields. Can someone help me understand its use here? I'll be very grateful
  
  (1) database (catalogue)
  (2) owner (schema) here I read-only user which I already defined as part of the definition of the SQL Server. It does not appear in the list.
  (3) database (catalogue of the work)
  (4) owner (scheme of work)
  
  Best regards
  Muhammad

  >

  Work catalog database is the location of the temporary objects of ODI (for example, C$, $ I, I have$ tables etc.)
  == I use a single user reading to read the data. How ODI creates temporary objects in SQL server. My work and master repository is the Oracle database.

  Temporary tables are used for a number of things, remember that at this moment in the topology - ODI don't know if your connection to the SQL Server is a source or a target, so he wants all the details, just in case. Reasons for Temp of source tables might be:
  Source of the joins of tables in different data sets with a staging expliitly, set on the source.
  Format (change data capture) objects - Tables to langer, newspaper views (items of $ J) etc.
  If you use only MSSQL tables as sources, you proably find no temporary object created side soruce, arrays of C$ will go into the scheme of work target (in this case, Oracle) that the I'll tables$. So in your case, it's normal.

  Scheme of work is the owner of the database value (catalog of the work) - once again, usually of dbo.
  == use dbo as sys in oracle?

  Type-IIRC no matter what user to the sysadmin role that creates objects have these objects as dbo by default.
  Im not MSSQL DBA if.
  Think of it as a qualifier that ODI will use when generation code selection based on the mappings of interface (for example select database.catalog.table xyz) etc.

  Hope that helps

  Published by: PeakIndicators_Alastair on May 14, 2013 08:53

  Published by: PeakIndicators_Alastair on May 14, 2013 08:54

• Confusion between the theories of computation

  Hello
  
  I confused with the notion of computation Essbase as States of SER60 who, for scripts of calc optmtal DIFFICULTY on members in the order of (Dense in first and then scattered) hour glass model m... However, according to what I read in a blog, he states that FIX is supposed to be used on sparse and if its inevitable to fix on the dense members then dense are supposed to be in last place in the order...
  
  the given reason was that sparse setting first reduces the number of blocks in memory and then dense members would be filtered from these final calculation blocks...
  
  Can anyone help clear this confusion?
  
  Thanks in advance

  Could you give links to or cite references of SER60 that you mention?

  Anyway, dense fixation will not reduce the number of blocks processed, but he could still improve performance and make a script more readable in various situations. A big one, is that a FIX on dense can prevent dynamic Calc. Members assessment in your building. The order of the dimensions in the FIX should be irrelevant, because Essbase restocking. So ' last dense "shouldn't matter.

  There is a very interesting discussion here: http://www.network54.com/Forum/58296/thread/1208974485/Order+of+Fixes+-doneit + material. Edward gives a good example of a script that can be written more efficiently thanks to a CORRECTION on dense (that OBVIOUS).

  Incidentally, I think Ben White should be stored members setting won't always prevent the evaluation of dynamically calculated members (all depends what else stored reference formulas, see FRMLRTDYNAMIC also PUT in the Ref Tech documentation).