Confusion over the memory of a bunch of Java and WLS_FORMS

Similar Questions

• Windows backup - Some Confusion over the Date of backup

  I have back up once a week on Removable Drive L:

  When we look at control panel > backup and restore, I see that my last backup was on January 3, 2011, as planned.  I also see that three files have not been saved because backup Windows could not find them.  No problem.

  When I look at the Drive: Explorer > computer > l: However, I don't see that the folder that contains the backup is dated 12/26/2010 under "update."  I remember correctly, is that it is all the time that I turned on my backup to a C: partition on my removable disk L:, probably create this folder on the first backup on removable disk L:

  As time passes, the backup on L: folder should not reflect the date of the last backup?  How can I know that the backup works (see other than the correct data in the control panel > Backup and Restore)?

  Here are the results: right click on the inf file: containing the backup (the file displays the "Save" icon), then the properties > Previous Versions shows no available versions.  Properties > general tab shows the typical parameters of a file; e.g., size of 0 bytes, date of creation, etc.

  Because it is a folder, there are no properties > Details tab.

  Dating back to the control panel > Backup and Restore > manage space, I see that two backups are stored in the inf file: Reader corresponsding for scheduled backups performed two since I have configured backup for this drive.  Everything seems normal.

  On further reflection, it seems that Windows 7 works normally, because the "Date Modified" column in Explorer mode don't not one) that reflects the changes made to existing files in a folder root or additons b) new files/folders in a folder root were made; rather the 'modified date' refers only to the changes that could be made to the properties of the folder root after its creation that is, in terms of sharing, security, etc.

  Since Windows 7, at least, you have no control over the name of the backup that is created and used for the backup folder, and there is (apparently) no exception to the general rule of Windows about how the "Date Modified" column is - at least in the case of backups - it seems that a user is more or less in "trust me". , rely solely on the information available in the control panel > restore and backup to determne if the backup does not work (other than to do a restore of your time immediately after the backup, not a good idea).

  I guess that the preschoolers old like me just feel more comfortable using the Explorer to display the properties for the actual backup file and see the date of creation.

  Maybe a suggestion that might be implemented in next SP?

• Confusion over the number of tunnels

  Hi all

  I'm very confused about the number of tunnels formed in my ASA 5520. By CLI, I see two IPSec tunnels, but through ASDM, I get the data you see in the attached picture. Someone knows about it. Thank you

  VPN-ASA5520-BLUR # sh vpn-sessiondb summary

  Summary of the current Session

  Sessions:
  Active principles: Cumulative: simultaneous peak: inactive
  SSL VPN               :       0 :         20 :               3
  Clientless only: 0: 3: 1
  Client: 0: 17: 2: 0
  IPsec remote access: 2:10:2
  Totals: 02:30

  Information about the license:
  IPsec: 750 configured: 750 Active: 2 load: 0%
  SSL VPN: 25 configured: assets 25: 0 load: 0%
  Active principles: Cumulative: simultaneous peak
  IPsec               :          2 :         10 :               2
  SSL VPN             :          0 :         20 :               3
  Totals              :          2 :         30

  NAC Active Sessions:
  No NAC session to display

  Mapping sessions VLANS active:
  No session mapping VLAN to display
  VPN-ASA5520-BLUR # sh clock
  07:58:34.698 METS Tuesday, June 12, 2012
  VPN-ASA5520-BLUR.

  The output of the ASDM is likely to match the output of 'see the vpn-sessiondb' without the key word "Summary", which also include VPN IPSec LAN - to - LAN both tunnels.

• Confusion over the link with ColdFusion 8

  I'm a little confused on the BIND methodologies to do what I do (and I'm sure we can do).
  
  I have a series of two RADIO for option 1 (let's say option 1 A of the value and the value B) and another series of two RADIO for option 2 (say option 2 A and B of value value) (see my code included).
  
  I want to make is that the user is selected, option 1-A, I selected option 2-A and vice versa; If the user selects option 2-A, the system should automatically, choose the 1.-a option. It also works for option 1-B with 2-B option.
  
  I hope that I am clear in my question. Otherwise, feel free to let me know.

  I'm sorry for the confusion, but maybe I'm too deeply reflective about the BIND because what I wanted to do can be easily done with JavaScript!

  OnClick on the CFINPUT RADIO can call a JS function to check and control what to see on the other set of options.

  One day, we receive more on our shoulders and the result is that our brain get confused! ;-))

• Im a little confused about the memory live system.

  • How each system X 32 and X 64 bit version of windows uses.
  • Whether it is better to have as much ram as possible.
  • If to much ram does not make a difference, why everyone said that more "ram the best multi-tasking.
  Thank you.

  This article shows the limits for all versions of Windows XP through Win7:

  http://msdn.Microsoft.com/en-us/library/Windows/Desktop/aa366778 (v = vs. 85) .aspx

  Remember that there may be limits imposed by your hardware; will focus on Win7 Ultimate 64-bit 192GB does not mean that your motherboard will be.

  More RAM is usually better, according to the software and applications that you use. Not all applications are able to use the RAM you install. If you do not 'Mistakes' memory and resource watch free, even RAM monitor after that you have a large number of open apps, then you probably have enough RAM installed. I have 4 GB installed on my two 32-bit and 64-bit systems and have never seen an error of "OOM", whatever it is I opened.

  As cheap as is the RAM, it certainly wouldn't hurt to add more to your system if you are 2 GB or less now.

  SC Tom

• Clear up the confusion over the name of the motherboard

  I ordered an upgrade of CPU hoping that it is compatible with my motherboard. I fell into a riddle because of unclear and defective data on the HP Web site.

  (1) Pegatron M2N58 - East named as (Narra 5)... and elsewhere on the page 6 of narrated GL6... well who is?

  AMD Phenom II X 4 830, which is not yet on the site of AMD's processor that I ordered.

  Different sites show different compatibility...

  According to the support page for my PC... as long as it takes in charge the Am2 + and TDP of 95 watts... it will be a game

  However, mistakes are confusing... and I'd like to see if anyone has this combo works?

  Thank you

  You are welcome.

  It seems to be a good match.  However, you're dealing with a 5 year and plu motheboard and a newer processor.  It is not always a good script for success.  The key is to be extremely careful when installing.  Make sure you add enough compound/thermal paste to ensure it will work cool.  If damage you it, needless to say, you cannot return it.

  Good luck!  I hope it works for you.  I'd be happy to hear the result.

• Confused over the upgrades and full versions for Windows 8 on a virtual machine

  Hello

  I am wanting to legally install Windows 8 or 8.1 on a virtual computer. When I look at the Microsoft pages only, they seem to offer Windows 8 one update and I can't find a way to the purchase of a previous version either. Is anyone able to point me to an explanation in plain English what I should buy.

  Thanks for your help.

  If you need to install Windows 8 in a virtual machine, you must purchase the full version of license OEM System Builder. If you need to install Windows 8.1 in a virtual machine, you can buy the license of retail sales (which is a full version) or OEM System Builder License.

• When I write an email in English and send it, the recipient sees a bunch of symbols and can not read what I typed in the email.

  When I send an email he composed in English but it intervenes in symbols or in a foreign language?  Anyone know why?

  original title: language foreign spam

  If you are using Windows Mail, then go to tools | Options | Send | International settings and set it to Western alphabet (Windows).  In addition, if it is in HTML make sure that the police is not something that the beneficiary is not likely to have.  If it is a strange font that you have added to your system, it may appear as empty boxes for characters.

  Steve

• images dialog box is empty when you insert the memory card

  This is after you have inserted a card high capacity in the player, which hung the memory slot.  Now just insert a regular memory card, the dialog box appears, but there is nothing in it.

  Sorry if the info seems confused but maybe the
  answer is here somewhere.

  FWIW... There used a similar problem with a Sony memory
  Stick... the solution is to insert the stick into the drive and
  Restart the computer... somehow this would reset the
  stick.  I don't know if it will work for you.

  You may also check your AutoPlay settings...
  If you insert the card and go to... Start / my computer...
  and right-click on the drive letter for the location of in the map is...
  choose... Properties / AutoPlay tab...

  Choose... Mixed content...
  Tick... Select an action to perform
  On the left, click on the default button / apply / OK.

  Give it a try...

  It is possible that your media player is not compatible
  with the SDHC technology. The best is maybe to buy
  an external drive that is compatible SDHC or download
  Unit photo using a USB cable.

  Regarding the card... have regular SD, you tried to manually
  Download the pictures?

  If you connect the device to your PC via a USB cable, turn
  on the camera... then go to... Start / my computer... it may be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / computer... the media slots
  Drive should be listed under... "Removable disk" with a drive
  letter.)

  Finally... the AutoPlay Repair Wizard can be worth a try:

  Microsoft Autoplay Repair Wizard
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad

• Frequent crashes - using 900, 00 k + memory, multiple tabs open - is the memory use a problem?

  I have a frequent crashing Firefox, several times a day.

  I have several tabs open, 100 +, and the memory usage is around 900 000 and more.

  I wonder if the memory usage is the origin of the crash, or something I can fix it?

  My task manager says that I use 67 percent of the available memory.

  Total: 2941

  Caching: 1202

  Free: 74

  Total: 207

  Paginated: 153

  No paged: 53

  Pagefile 2981M / 6116M

  This is the id of the 10 reports last crash:

  BP-c79bc97e-D502-4319-a49e-7bc0b2130917 9/16/201311:38 PM
  BP-19f60b05-F268-4693-B622-066f42130917 9/16/20139:59 PM
  BP-f43d9597-9023-487A-90d4-994d32130916 9/16/20137:15 PM
  BP-b552cdc4-6920-4EED-bff7-cb7cf2130916 9/16 / 20136:16:00
  BP-b62272cb-f4ef-4F30-ACC9-4a1752130916 9/16 / 20135:14:00
  BP-f4bebdd3-20f9-4444-8245-520c42130916 9/16 / 20133:20:00
  BP-bad99992-5b2b-4ac1-96bc-e03812130915 9/14/201311:31 PM
  962c451e-DC19-4707-9def-b2dd5cd4caed 9/14 / 201310:19:00
  BP-8de4bc69-0f86-417A-9727-e88622130914 9/14/20132:29 AM
  BP-6ae9815f-1472-492d-8738-1cd842130914 9/14 / 20131:01:00

  Where can I set preferences for dom.ipc.plugins. *? (I see no plugins or extensions of Tools-Addons that resemble a dom.ipc.plugins?)

  Extensions I have are:

  AddBlock

  Protection of navigation

  Troubleshooter

  YesScript

  PLugins:
  
  
  

  Java

  Shock wave

  Could you point me to where in mozilla crash reports that I would find the number of open tabs and memory as being the cause of the accident? (just so I can check after I have try to reset that plugin.exe run to start again I can take a look and see if the memory usage is better - or should I look at the Task Manager for that information also)?

  I noted the crush in the report was "EXCEPTION_BREAKPOINT", I guess that's a reason for exception error due to many different causes?

  I also noticed a report of incidents listed:

  Total virtual memory: 2147352576

  Available virtual memory: 533061632

  System Memory use Percentage: 72

  Available page file: 3324129280

  Physical memory available: 852447232

  What is the indication of memory, you see?

  Are these 'bad' (high usage) values of memory?

• I usually 30 tabs open, and memory rises in an unexpected way, so that when it reaches 1.2 GB, firefox crashes. Also if, for example firefox consumes 700 MB of memory (with lots of tabs open), and if I close the tabs and let just 2 or 3 op

  I usually 30 tabs open, and memory rises in an unexpected way, so that when it reaches 1.2 GB, firefox crashes. Also if, for example firefox consumes 700 MB of memory (with lots of tabs open), and if I close the tabs and let just 2 or 3 open, the memory usage does not go down and left to the 700 MB. Thank you for your attention. Cordially, Ricardo

  ID of the Crash

  BP-765e3c37-0edc-4ED6-a4e9-7ed612100526

  See http://kb.mozillazine.org/Firefox_crashes and Firefox plant - troubleshoot and prevent assistance fixing crashes

• HP ENVY 4520: HP Envy 4520 - refusing to Scan over the network

  Hello

  We currently have a HP Envy 4520, which print, however don't scan or copy over the network.

  I have downloaded and run the HP doctor tool, but it crashes to Windows Image Acquisition (WIA). This article has been read a few topics here, I restarted the following three services:

  1. Remote procedure call (RPC)
  2. Shell Hardwarew
  3. Windows Image Acquisition (WIA)

  Once I finished at the outset what precedes, the scanner worked as expected. However after a reboot - the problem is more severe. The doctor program crashes at the same section and restart services fail to achieve something.

  All software and drivers are up-to-date by using what has been provided on the HP website.

  The error messages vary as well, for example Adobe, I see "fatal error. Commissioning stopped. "

  Hi @DocCottle

  Thanks for your response!

  I managed to solve the problem. After you reset the windows service, you must then make sure that the printer restarts too! I didn't do that. Once done all is well!

• OJ6480 am not able to import photos from the memory card inserted in the printer to laptop?

  I can't import pictures from my memory inserted in my OJ6480 card.  I am connected with USB and nothing appears automatically after you insert card.  Also, I used the menu photo option and he doesn't want me to import.  Help, please!  Thank you.

  Hi cafahr,

  I understand you are trying to print photos from a memory card.

  I find the user manual for Officejet 6480 and found the following.

  After taking pictures with your digital camera, you can print them immediately or save them on your computer. To save the pictures on your computer, remove the memory card from your digital camera and insert it into the slot for card memory on the device.

  To save your photos

  NOTE: Use these instructions only when you use a network connection. If you are using a USB connection, then a dialog box appears automatically on the computer when you insert the memory card into the device.

  1. Insert a memory card into the suitable location on the device.
  2. press on the picture Menu.
  3. press the arrow keys and select Photo transfer and then press OK.
  4. press the arrow keys, and then select Yes.
  5. press the arrow keys and select transfer to computer, and then select the name
  of your computer.
  6 follow the prompts on the screen on your computer to save the photos to your
  computer.

  From what you described, the question is simple, the dialog box does not appear on the computer. What happens if you start it > computer or workstation? Do you see something here that looks like it could be the card into the printer?

  Try to leave the printer and unplug the power cable (with the inserted memory card), leave the printer unplugged for about a minute and then plug it back. I want to see if this will push the communication to the computer.

  Have you used this memory card in the printer before successfully? I ask because the problem may be the memory card or the memory card reader in the printer. Take a look at this link, memory card troubleshooting.

  I hope it's useful. If the problem persists, please return with answers to the questions I asked, I'll gladly do some additional research and return with possible solutions. Please also let me know if you use a Mac or a WIndows OS.

• What is the difference between the memory usage and bunch of EM?

  Hi all
  
  In OAS 10.1.3.3 Enterprise Manager, JVM Metrics, there are two columns on memory:
  
  Use of memory (MB)
  Use of memory segment (Mo)
  
  (use of heap seems to be up and down, but the memory usage is never down)
  
  What are the differences between the two?
  
  Thank you very much
  xtanto

  Jin

  Just check my answer on this URL.

  What is the difference between the memory usage and bunch of EM?

  Kind regards
  Hamdy

• Really confused on how to record voice over the music, how can I?

  Hello. I have currently the adobe audition trial it just says: Adobe CC. First off I know it does not part of my question but CC is good enough or should I look for in an another verision: I'm doing the songs.

  I upgraded to audacity and am confused about the simplest thing. In audacity, that I could record through my microphone and recording listen to my music in the back, with my helmet and the record like that. In Adobe Audition, it seems that I can't register unless my entry and exit are my microphone, which confuses me too (im a beginner), the only way I can save is if my microphone is my entry and exit put then I hear nothing, I save or any music I put out there.

  I can hear the music if I switch my output to my headphones, but then I can't save... I am so confused I just want to listen to music through my headphones and save with my microphone, but I can't save it unless my return is my microphone. One thing I read was trying with multitrack, but when I open a multitrack session, the symbol of the recording fades and I can't click on it to save.

  To expand a bit on what Steve...

  Yes, the hearing is completely until you want to do and because it is a professional software, a ton more.  The problem is what makes learning much steeper than simple programs (but by limiting further).  Just to give an example, on my set up I can save 32 simultaneous sources (in multitrack) and implemented several different streams to be monitored.  With this versatility comes complexity, however, and I strongly suggest that you spend a few hours with some of these video tutorials available by searching.

  To give you a brief overview of what you need to do to get started:

  Go to the Session File/New/multitrack, set up for the bit depth and you want sampling rate, mono or stereo (probably stereo) and all that kind of thing, then give it a name.

  Go to Edit/Preferences/Audio Hardware and say audition to use your default microphone input (you may need to go to your Windows Audio control and set up there if you mic does not appear on the list of the hearing).  Then configure the default output to your computer or the headphone speakers.

  On the multitrack display, choose the track you want to record in (I'll assume that you already have a piece of music that you have open in a track) and make sure that the input source is your micro - entry is this box with the right arrow in the box to the left of each track.

  Click on red 'R' to the left end of the runway to allow registration - just the track (s) you want to save, not those with the existing equipment).  If you want to make your voice heard through the computer, click on the little 'I' next to the 'R '.  It routes your input to output, but as Steve says, your computer could introduce a latency.

  At this point by clicking the Red record button in the main transport controls should begin to register with reading going out of your computer.

  Now, it's essential, but you have a ton of options (and a ton of shortcut keys, if you choose to learn).  Why so complex for a single track?  Simply, if you record multiple tracks at once of the external speed then you should be able to tell hearing what source put in which the track.  Once get going you, you can create a model of 'session' If you want to use the same set up every time.

  Recycle than trying, but I suggest you strongly look at some tutorials for more details - and I'll second comment Steve, whatever DAW you decide subsequently, a priority purchase of an external audio interface to work around the one built into your computer.