Replacement of the transmitter/receiver of Microsoft touch mouse

Similar Questions

• Install the transmitter/receiver Magellan on PC - fatal error 1925 & error 1603

  Try to install the transmitter/receiver magellan on my pc and said fatal error 1925 - "you don't have sufficient privileges to complete this installation for all users of this machine.  Log in as administrator and try again - then Fatal error 1603 - look at the window install help (Msi.chm) or MSDN for more information.

  I don't know what it means at all.  Can someone help me with this?  Thanks in advance

  CD

  ChattyC

  We have no knowledge of the app.  It would be best to contact them.

• Microsoft touch mouse clicks do not work properly.

  Original title: Microsoft Touch Mouse

  I look forward to this for months and fortunately bought mouse yesterday. But I'm afraid I have to return within a few days because the right click is tiring, that I can't keep my finger on the left side if I am in the right click? have to raise that finger each time. No way to click. So by selecting windows without accidentally trigger something is a problem without a middle-click. It very quickly becomes a pain in the * after playing starcraft 2. Why is it not possible to customize the touch gestures? Another major failure. Other than these issues, it's a beautiful piece of engineering. My concerns will be adresed. or do I have to look elsewhere for a new versatile wireless mouse suitable for a left-handed person?

  Hi Premier69,

  You must contact Microsoft hardware support for assistance on this issue.

  Microsoft Hardware support

• Is Microsoft Touch Mouse Artist Series - 3KJ-00012 compatible with vista

  Is Microsoft Touch Mouse Artist Series - incompatible 3KJ-00012 with vista?

  Hello

  
  Welcome to the Microsoft Community Forums.
   
  
  I would like to inform you that the Microsoft Touch Mouse Artist Series - 3KJ-00012 is compatible with Windows Vista.
   
  
  You can also download the drivers for the mouse from the link provided.
  http://www.Microsoft.com/hardware/en-us/p/touch-mouse-limited-edition-artist-series#support
   
  
  If you need help with the Windows operating system, just tell me and we will be happy to help you

• Microsoft touch mouse problem.

  I have 3 Microsoft Touch Mouse White artist series.

  I use 2 different PC all in one and 1 not use because to back up only when one of them maybe broken

  My 2 pc a using windows 7 and the other using windows 8

  Before that, the mouse can function normally, even if I use the two together. I'm working on 2 PC and both can work well.

  One day there, at the beginning of the problem. my mouse to win8 dead. Blue light power off. No, not because the battery empty, because I got the new battery. I have try the button stop and once again, the blue light can again. but for a few minutes, died again. I have try off the button, sometimes can be downloaded on the blue light, but sometimes still dies.

  because I think that maybe the mouse broken. then I opened a new.

  First, for the work maybe 4 hours, the mouse works normally. but after that I have the same problem with my old touch mouse.

  because the 3rd (let say us the new 3rd) died too, I try again the 2nd mouse (mouse to win8 that first death). and hoola... can work again. Buat after 15 min... died again... I try the switch Off ON, can WE too. I have try the 3rd mouse... can be downloaded again... but after a few minutes... died again...

  After 2 days when I work only on pc win8, because not need use 2 pc, I realized when my mouse in win7 not ON / not to use my mouse to win8 posisition offshore, will work without problem...

  but when my mouse in win7, my mouse to win8 will have problem.

  Someone knows what happened... because this problem does not start. I already use the two together 8 months ago.

  And do not know why this can happen right now.

  Thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you to follow the below methods and check

  Method 1: Run the troubleshooter of material and check out la.

  A convenience store is an automated tool that can find and automatically fix problems with your convenience store PCA is a tool automated which can find and automatically fix problems with your PC

  1. Press the Windows key + C on your keyboard to show the charms.

  2. Troubleshooting type, and then click Troubleshooting under settings.

  3. Select the material and audio and Audio -click and follow the instructions.

  If the problem persists, try Method 2

  Method 2: you can install the Mouse and keyboard Center and check if this is useful:

  Reference:

  https://www.Microsoft.com/hardware/en-in/d/touch-mouse

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• problem with the transmitter/receiver to fall from the mouse?

  Microsoft 5000 wireless mouse: transmitter/receiver will not stay in the stand built into the mouse

  Hello

  Looks like a claim under warranty.

  Wireless Mouse 5000-3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=012&active_tab=systemRequirements

  Microsoft Hardware Warranty Info.
  http://www.Microsoft.com/hardware/warranties.mspx

  Hardware support of MS and warranty claims
  1-800-936-5700

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Can I use any receiver for Microsoft Wireless mouse 3500

  I have Microsoft 3500 Wireless mouse, couple weeks back I lost his nano-receiver, can anyone help figure out if I can use any other receiver for her or I have to buy new mouse collect them all?

  If you have a receiver to predict the "Microsoft Wireless Mouse 3500" you might be able to connect again - not positive on this one (some Logitech devices can be "trained" to use other receivers).

  In general though - if you lose the receiver, that the mouse is golden.

• Problem on Microsoft Touch mouse and Windows Vista

  I had a tactile mouse memory of Microsoft Corporation, and I use Windows Vista on my laptop.

  Of course, I know that this is exclusively for Windows 7, but I had no PC Windows 7.

  Until I open the box of the mouse, I would like to know if Vista can support the mouse with basic functions such as the left and do a right click, return and scrolling.

  If these basic functions are not supported under Vista, I have no choice and have to sell the touch mouse instead.

  So pls tell me what function will be supported.

  Or I have to install some kind of pilot...

  Thank you!

  Hello

  It would be best to contact the support team of Microsoft Hardware for more help on these issues. We have a dedicated team to help you with such questions.

  Microsoft Hardware Support: http://www.microsoft.com/hardware/en-us/support

  Hope the information is useful.

• Getures Microsoft Touch Mouse mouse does not.

  Hello

  I have problems with gestures not working not not on my newly acquired touch mouse.
  I fought to get their work when you first install the mouse. / i was not invited to install the intellipoint software when I plugged the mouse in my laptp for the first time. /It seemed to install just the generic driver, which of course gave only the basic features and no multi gesture support.
  I then downloaded and installed the software intellipoint from MS suite, but who also did not the gesture of support - even after the reboot!
  I have uninstalled the drivers, reinstalled the drivers, then miraculously appeared to be lucky, and gestures all worked – for a week, then stopped working again? Why this is happening and why the gestures do not work after installing the intellipoint software required? I am now lwft with basic functions and none of the gestures.
  I tried uninstalling, reinstalling, restart... the mouse would be defective? /It works, but just not gestures. I'm on a Windows 7 64-bit system.

  Hello

  Method 1: check if the required version of the intellipoint software is installed.

  http://www.Microsoft.com/hardware/en-us/d/touch-mouse
  http://www.Microsoft.com/hardware/en-us/downloads

  Method 2: clean boot the computer and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

   

  http://support.Microsoft.com/kb/929135

  Method 3: If the problem persists while you can contact the Microsoft Hardware Technical Support for assistance.

  http://www.Microsoft.com/hardware/en-us/support

  Hope this information helps.

• Microsoft Touch Mouse mouse behaves badly

  When you try to scroll with my touch mouse from Microsoft (not), it closes all open windows and tries to stop Windows 7.  I'm not under any key assignment software (people had suggested AutoHotKey to emulate the Middle-click.

  This does not happen after a restart of Windows 7, but starts to occur randomly after the computer has restarted and Windows worked for awhile.

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  See also:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

• The key macro for windows touch mouse explore

  Hello. I'm a new user in OneNote and one of the features that I love is the copy - paste into OneNote.

  To access this feature with the keyboard, the key combination is 'Windows key + s'.  I bought the Explorer touch mouse with the intention to reassign one of the buttons of the mouse to perform the 'Windows key + s' command.
  There is the possibility to add a macro in the basic commands and there is the possibility to choose a special key (Windows key), but this does not work in the implementation of the macro. When I press the assigned button, the taskbar appears for a second or two and a letter 's' appears on which window is active, but I can't figure out how to get the "Windows key + s' feature.
  Ideas?

  Hi Roger,

  You can change the shortcut to a macro, to so proceed as follows:

  a. open Microsoft Office word (changes will reflect on all Microsoft Office applications)

  b. click the Microsoft Office button, and then click Word Options.

  c. click Customize.

  d. side of keyboard shortcuts, click Customize.

  e. in the categories list, click Macros.

  f. in the list of Macros , click the macro that you want to change.

  g. in the field Press new shortcut key , type the key combination you want to choose.

  h. check the current keys box to make sure that you're not assign a key combination that you already use to perform a different task.

  i. in the list record in , click the option that matches where you want to run your macro.

  Important: To allow your macro in all documents, do not forget to click Normal.dotm.

  j. click close.

  You can also see the following article for more information:

  Keyboard shortcuts

  http://Office.Microsoft.com/en-in/OneNote-Help/keyboard-shortcuts-HP001112536.aspx

  I hope this helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How can I set one of the buttons on MS Explorer Touch Mouse double-click?

  I have a MS Mouse older 5000 and there is an option to set one of the two buttons on the side of double click.  I like this feature but can't find a way to do it on the Explorer Touch Mouse.

  Hi Mark,

  Thanks for posting your query in Microsoft Community.

  From the description of the problem, want to set buttons double click of the mouse. I'll be happy to help you on the issue.

  Let us try the steps from the following link:

  Change the mouse settings (to change the operation of the mouse buttons)
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  I hope this helps! Let us know if you have problems with Windows in the future.

• Microsoft touch mouse hold - no driver and remains undetectable Windows 8

  My mouse wedge of Microsoft touch worked (Windows 8). However, it has stopped working for no apparent reason and cannot be detected. I uninstalled and reinstalled the download from the Microsoft Web site and followed the advice posted. Under the 'material' on my laptop, it indicates that no driver is installed for the device and that none are necessary. The material appears under devices in the Control Panel, but cannot be detected. Any ideas? No other Bluetooth device is connected (or power), and all updates are installed. Bluetooth is turned on and other devices are detected when they are on.

  Just managed to get on Microsoft Surface support.

  To reset the mouse to the corner and allow it to repair, hold don the power button until the light flashes. This resets the pairing.

  Worked fine after that.

  Thank you guys. Excellent service.

• How can I reduce the DPI of my "Microsoft Comfort Mouse 6000"?

  Is this possible? I installed the drivers, but the only thing I can do is the remapping of keys.

  Ok

  First of all, my experience tells me that maybe it's that you have installed the wrong driver. Please can you tell me exactly what that driver you have installed for 'Microsoft Comfort Mouse 6000' and where you got to?

  Second, if this is the correct driver for the Setup programs start menu look.

  Microsoft Web site implies that the latest intellipoint (mouse from Microsoft software/drivers) is probably 8.15...

  http://www.Microsoft.com/hardware/en-us/d/comfort-Mouse-6000

  If this isn't what you have installed and then try and see what happens.

  Please mark this as useful or response if applicable.

  Tricky

• What's the trick to make Microsoft Bluetooth Mouse 5000 "discoverable"?

  Hello

  Maybe it's a bit off-topic, but I tried to get my Microsoft Bluetooth Mouse 5000 works with Windows 7 and had a question about the mouse is.

  I know that to make it discoverable, you press and hold the button at the bottom and on the top light is supposed to blink red and green.

  In my case, when I do that, most of the time, the light on top of the mouse will turn on/green, for a few seconds, and then turn off.

  I have to go through the power of stop/start / hold cycle several times until I can get the light flashes green/red continuously.

  Even with a new set of batteries...

  So, I was wondering, by the subject: is there some 'trick' to get the mouse to advance in discoverable mode with blinking green/red?

  Thank you
  Jim

  Hello

  Just after my last post, I think I found just the "top secret" handshake :)...

  For the record:

  (1) when you turn on the mouse, the light on top of the mouse (green).  It doesn't turn on immediately, but takes a second or so.

  (2) AFTER the light turns green, THEN press and hold down the button on the bottom, until the light on top starts to blink green/red, which indicates that the mouse is discoverable.

  I tried the procedure above several times now and have been able to get the mouse in discoverable mode successfully every time.

  I think that what I was doing wrong before, it was only I pressing me the button immediately after turn the mouse (that is, in particular, probably before the green light came).

  I hope this helps someone in the future!

  Jim