Confusion with the settings of export to YouTube

Similar Questions

• So confused with the export

  Hi everyone, I used FRAPS to record the gameplay of a certain video game and he did three different clips (the other continues where the previous clip ended). I want to change this in After Effects, but first, I need to do a video together. I thought that first Pro CS5 could do the job, but I'm confused with the sequence settings. It seems like everything I try only reduced the original clips for a video surrounded by a big black space. The clips are 840 x 524. I want to join the clips and then export it to the size of origin, but first Pro CS5 changes the size of the video. Help, please.

  You must establish a pre-defined sequence which corresponds to you source footage. If there is no one to begin with, choose office and there you can set almost all the parameters of the sequence. Which will remove the black borders.

  To work with FRAPS materials, there are several threads on the CS4 and prior to the forum. A search on "FRAPS" who should appear. Lots of good reading.

  Good luck

  Hunt

• change the settings of export based on photo

  Hi all, I searched a lot, without finding an answer to this task: I need to change the settings of export based on unique photo, for example settings megapixels resize factor rating function.

  I know that export settings can be changed with updateExportSettings but it is global for all photos of.

  I also know that in the Export Department, I can define a processRenderedPhotos function in the loop inside the session: "renditions", I can do additional actions on each photo, but after having been made.

  I know finally I can define a filter Service where to put the postProcessRenderedPhotos function, but it is a post-processing work so after the photo was made and registered...

  Then... How do I? Where to put code to change exportSettings for each photo based on a feature of the photo?
  Thanks a lot for your help

  Julian

  How to access every photo in the function "filterSettings = function (renditionToSatisfy, exportSettings)"...? As I said, I need customization of the exportSettings based on characteristics of the photo, so I need to access the photo associated with a current rendering: how?

  The 'renditionToSatisfy' argument is class LrExportRendition, and renditionToSatisfy.photo gives the restored LrPhoto.

• How to work the DNG? is it always the original image with the settings of self-development?

  Hello!

  A question about DNG. recently, I had to put a bunch of my RAWs to print elsewhere. I copied all the RAWs and XMP files. Then imported on a different PC/LR. Others do not, some reflect my edit-adjustments. RAWS all VINTAGE.

  I save now on some DNG of my final print changes.

  I'm thinking a DNG in PDF format.

  When I export a DNG a RAW processed, is it cooked in? or is it always the original image with the settings of self-development?

  Thank you

  Alex

  Lightroom is a non-destructive Editor. So, you can take any file type (JPG, DNG, RAW, TIF, other) and edit this photo, and always come back to the unedited version.

  If you export your RAW as DNG or export your RAW as the 'Original', you can also revert to the unedited export version (but not if you export as JPG or TIF).

  With regard to your initial statement that you have 'copied the RAWs to print elsewhere', they may not had the changes written to XMP. It would also be a problem with the DNG format, as I said, you should enable the option to write changes into XMP or issue a command, because by default, Lightroom writes not changes to your DNG or sidecar xmp for the RAWs files.

  The copy is different from export.

• How can I fix the speakers on my Asus laptop? I played with the settings and accidentally deleted some functions.

  original title: speakers on windows 7

  How to fix speakers on my Asus laptop. I played with the settings and accidentally deleted some features and I can't restore it to its original.

  Can you help me with this problem?

  Thank you in advance.

  The best

  YinNooy

  Use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.

  I hope this helps.  Good luck.

• Can we synchronize permission selected with the settings of operating system Notifications BB10 for our Application.

  Steps to follow:
  BB10 device--> settings--> Notifications--> Applications--> [name of your application]--> all alerts [Toggle button]

  I have an obligation to check whether or not 'All alerts' is allowed through settings when the application is running. To check if we can synchronize permission selected with the settings of operating system Notifications BB10 for my application. How to get javascript code if alerts permission is on / off, while the application is running.

  I tried adding the blackberry.system function and tried to hasPermission (blackberry.push) also, I can't determine if permission is allow / prohibit... Please suggest how to get that.

  I don't see a WebWorks API for this. If I expected to be anywhere, it's here:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.notification.html#jbo1385148829097

  But it seems that this API has not been fully implemented; It may be useful to connect a developer Issue Tracker JIRA to get this feature added.

  At the same time, there is this API of Cascades that looks like what you're looking for:
  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationapplicationsett...

  Write an extension for this feature should allow you to access this feature:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/template

  At the same time, a colleague is currently working on an extension that should open many features of Qt, and I think that the API above should be accessible through this extension. He must be released over the next week or two, so you can wait for that as well.

  EDIT: On this last point, see this extension which provides a mechanism for attaching in the majority of the Qt APIs.

  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/QtBridge

• Extremely confused with the extremely complicated presentation of BlackBerry applications

  Please help me, I'm very confused with the extremely complicated presentation of BlackBerry applications.

  I made an app, the name is "App", I got signed and downloaded the App using the emulator Ripple, with the word 'HelloWorld' signature (password not true of course).

  Now, I do another application, with the name of the App (B) I CAN'T use the same HelloWorld signature password because the emulator Ripple said "Oh, Snap!" Build request failed with the message: [ERROR] error: Code signing request failed because this version of the application or the package has been previously signed. If please increment the version (s) and try to connect again. »

  Now, I don't understand and I am EXTREMELY confused with the presentation of the model of application for Blackberry.

  I should first request, for an another RDK and COMINCO files create a new signature for App B password?

  Or should I just increment the bundle version? the problem is when I tried it on Blackberry server seems to give narrations of error message that the APP ID is already used.

  Okay, I'm officially stuck and I don't know what to do. Can any developer of blackberry here or the official employee blackberry tells me what I need to do?

  Thank you.

  I do not use ripple either but can see what the problem is (nothing to do with the ripple)

  Open your file config.xml for the new project (probably copied 'App A'?)

  In the widget section, change the id to something different, for example com.example.AppB

  Save - reload the ripple and make sure you have the new ID in the Config-> Widget

  All sorted

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  The work path is a vector and infinitely scalable, but when caress you, Photoshop sets the pixels on a layer following the path.  These pixels are rasterized and based and cannot be resized without loss of quality.  You have options.  If you want to enlarge the raster layer, transform the work path and stroking again.  Or work at a resolution higher, in the first place.

  Either incidentally, you can't trace a path with the pen, because it's a vector tool, and caressing is a matrix function based.

  

• Confusion with the implementation rate Comp

  I'm a bit confused with the implications of fixing the rate of the wrong frame.  My camera can record to 23.976 however the manufacturer sometimes mentions this parameter as 24 p in the manual.  I read that there is no harm using 24 p if the model is a bit long second.  But questions arrise if the model is longer and you are being followed.  On the other hand, mocha specifies that you be specific in the choice of your pace.  The difference.024 makes a real difference?

  If 24 fps is the standard film why camera makers made their record of cameras at 23.976, or film also just named its 24 p and 23.976.  23.976, 24, 25, 29.97, 30, 59,94, 60, they are all so close

  Also, what are the consequences of ripping out at a different pace

  Thanks in advance

  CS5.5

  If 24 fps is the standard film why camera makers made their record of cameras at 23.976, or film also just named its 24 p and 23.976.  23.976, 24, 25, 29.97, 30, 59,94, 60, they are all so close

  Also, what are the consequences of ripping out at a different pace

  Thanks in advance

  You can blame the TV standard NTSC color for the odd frame rate.  At the same time, it was really 30 frames per second.  These are the days of TV in black and white ONLY.  Engineers worked mightily to get to a color system that was compatible with existing B & W games millions, and they finally got it.  But to answer a color signal, they need a little bit more information in each image. The NTSC signal was already packed and needed something to give, so they slowed down the pace a bit.

  Thus, 30 images/s became 29.97... and in direct proportion, 24 fps is 23.976.  Just learn to live with it.

  "Yes, well how can you avoir.976 of an image?

  You can not.  But a frame does NOT miss a count of the number of frames in a second. It's really a MEASURE OF TIME.  PAL-Land, a frame is 1/25 of a second.  In Hollywood, a frame is 1/24 of a second.   In days of yore NTSC, a frame was 1/30 second.  But since 1953, 1/29.97 second.

  Don't obsess over 29.97 and 23.976.  Just use them and get used to them.  Do not put 29.97 images in a model of 30 fps, or 23.976 images in a model of 24 fps just because you like whole nice.  If you do, the movement of the images you shoot can go all twisted up.  Do not.  Do not.

  End of sermon.

• confusion with the categories and types of backups

  Hello
  
  I started studying the RMAN and I'm getting a little confused with the backups... ask someone to clarify the following queries:
  
  1. HOT times and COLD backup strategies perform BACKUPSET BACKUP and COPY of the IMAGE?
  
  2 about the HOT water and COLD backup, are they only associated with the FULL backup?
  
  3. incremental backup are also HOT or COLD backup?
  
  4. incremental has 2 types: Cumilative and differentiated?
  
  
  I'm a bit confused with the above...
  
  Help, please.
  
  Concerning
  KK

  Whether HOT or COLD:
  BACKUP DATABASE will create BACKUPSETs

  (this default value can be overridden if you have set up the TYPE of DEVICE...) BACKUP TYPE to... where the backup type can be changed by default for the COPY.

  Whether HOT or COLD:
  DATABASE BACKUP AS COPY will create Copies of the Image

  An incremental backup can be a HOT or a COLD backup.

  Hemant K Collette

• Confusion with the PF_Cmd_SEQUENCE_FLATTEN command.

  Hello

  I am very confused with the PF_Cmd_SEQUENCE_FLATTEN command. In literature, it is mentioned that it is sent when recording and duplication of a sequence. When I duplicate my custom effect FLATTEN is sent. But my confusion here is that this command is sent to the former effect which is reproduced or duplicated new effect?

  Think about what I'm doing. Please let me know where the explanation is not enough:

  I store an int value in the sequence data. And for each effect I continues to increment.

  1. I add a layer. Then I add 2 effects customized with data sequences 1 and 2 respectively.

  2. now duplicate the layer. PF_Cmd_SEQUENCE_FLATTEN command. I increment the sequence data. It is called twice for 2 custom effects. Data are 3 and 4 respectively for 2 new duplicate effects.

  But the problem is that now the effects in the first layer and the second layer, both have same sequence data. that is the 3 and 4 respectively and not 1, 2, 3 and 4.

  This can happen if the FLATTEN command is sent to the former effect prior to duplication. It's my guess that both the layer effects have updated IDs.

  Any ideas?

  Thank you

  Dheeraj.

  so...

  during the FALTTEN event records some data:

  I'm #3 on layerID 1024 in comp itemID 17 effect.

  during the commnad UNFLATTEN effect checks that it is.

  If there is effect on layerID #3 1024 17 itemID tabletop,

  He must say what the former effect.

  If data are different, it means that it is the new effect.

  It is possible that the UNFLATTEN commnad happenes before the effect has it's own effectRefH again.

  so you have to wait with this review the first call of updateParamsUI.

• Windows installed the automatic windows update agent and I would appreciate help with the settings option in this newly installed agent update so no update never install or download unless I choose to do.

  Hello.

  I have windows vista 32 bit home edition.

  Today somehow automatically installed windows ' automatic update agent 747600226

  I always keep my settings to check the updates but let me choose whether to update or install.

  With this new "update automatic agent" which automatically installed on my system, I want to make sure I have place it properly so that it remains in the same way that I always have my settings but two settings (options), he checked, and are confusing for me to know what those checked settings will do.

  I would like to help you with these settings to make sure that the update is still as I want.

  Below chose correctly when the new program installed today.  That's how I still want the settings to be:

  Look for updates but let me choose whether to update or install

  Please let me know if I need to change all the options account required in addition to this update agent to ensure that only, I choose to update or install.

  There are four options and a box is in two and I don't know if I should remove the check marks or not.

  Here are the other four options that I need to know how to configure it so that only I have update/install.

  Once again, the download automatic microsoft today (update automatic agent 7.4.7600.226) without asking for my incentive preset automatic update options and that's what I'm trying to make sure is set correctly so that nothing installs or updates without asking me or let me do.

  Option 1: (this option is checked. If I leave it checked will be it install or warn me only?)

  Give me updates recommended in the way I receive important updates.

  Option 2: (this is not checked and am not worried about this one)

  Allow all users to use installed on this pc.
  
  Option 3: (this is checked and want to know if should uncheck; what I don't want is any what to auto install, but the wording of this option and option 1 are vague because of the "give me " so I don't know what it means or will do.)  If this box is left to it automatically update/install?)

  Give me updates for Microsoft products and looking for new optional microsoft software when I update windows

  Option #4 (this is not checked, and I am not concerned about this).
  
  See the notification me detailed when new microsoft software is available.

  Thank you very much for your help.

  Take care! :)

  Hello

  The Windows Update automatically updates the updater (himself), regardless of your settings.

  1. Yes it will alert you so you can update or install.

  2. check if you need more of yourself (other users) to be able to select and install the updates.

  3. it will let you know when they become available.

  4. just gives the news of additional details about some of the updates.

  Looks like you're ready for anything you like.

  Rob - bicycle - Mark Twain said it is good.

• Correct the settings of export for an HD project from Canon xh - a1

  I came to Premiere Pro to use Final Cut Express. I captured images of my Canon XH - A1, edited it, added music and am now ready to export the file to DVDs and youtube.

  This is where my problems start. I thought that the format Quicktime would give me a preset for HD video. This isn't. I looked at several alternatives and not managed to confuse me.

  (1) what would be the best setting to restore a file to use for creating DVDs?

  (2) what would be the best setting for the rendering of a file to use to create youtube video? Section "B" to this question would be "is H264 where I should start at the creation of youtube?

  Any help will be greatly appreciated. I tried to use Lynda.com for this and not sure that my answers will work for this.

  1 Mpeg-2 dvd, game source, quality attributes. Multiplexer No.

  2. simply choose a preset of Youtube (its under H.264) they work fine.

• Is it possible to start an application with the settings

  Hello together,

  I wrote an application that is stored on a network. Another computer people begin to work with it. Now, I have the problem, that I need a few different configurations on each computer.

  It is possible to start an application labview with parameters, such as: application.exe - User_1

  The application must check the settings and should move to the required configuration.

  Thank you very much and best regards,

  Michael

  Hi Michael,

  Yes it is possible. First, you need to enable the transfer of data from your settings. You can do this in the application builder. It's something like 'send command line for exe settings' you will need to activate. You will get the setting in your program with the property "App.Args". It's an array with the name of the exe as the first element and an entry for each additional parameter bound.

  It will be useful.

  Mike